Dry reforming of methane over calcium-deficient hydroxyapatite supported cobalt and nickel catalysts

Highly Stable Ni-B/Honeycomb-Structural Al2O3 Catalysts for Dry Reforming of Methane

Two-component catalysts have garnered significant attention in the field of catalysis due to their ability to inhibit Ni sintering. In the present work, honeycomb-structuralstructured Al2O3-supported Ni and B were prepared to enhance coke tolerance during dry reforming of methane (DRM). Transmission electron microscopy (TEM) results revealed that the average particle sizes on Ni/Al2O3 and Ni-0.16B/Al2O3 were 7.6 nm and 4.2 nm, respectively, indicating that B can effectively inhibit Ni sintering. After a 100-hour reaction, the conversion of CH4 and CO2 on Ni/Al2O3 decreased by approximately 5 %, whereas on Ni-0.16B/Al2O3, there was no significant decrease in CH4 and CO2 conversion, with values of approximately 81.6 % and 87.2 %, respectively. In situ DRIFT spectra demonstrated that Ni-0.16B/Al2O3 enhanced the activation of CO2, thus improving the catalyst's stability. A Langmuir-Hinshelwood-Hougen-Watson (LHHW) model was developed for intrinsic kinetics, and the resulting kinetic expressions were well-fitted fit to the experimental data, with R2 values exceeding 0.9. ActivationThe activation energies were also calculated. The outstanding stability of Ni-0.16B/Al2O3 can be attributed to its stable honeycomb structure and B's ability to significantly inhibit Ni sintering, reduce catalyst particle size, and enhance coke tolerance.

Catalytic Upgrading of Clean Biogas to Synthesis Gas

Clean biogas, produced by anaerobic digestion of biomasses or organic wastes, is one of the most promising substitutes for natural gas. After its purification, it can be valorized through different reforming processes that convert CH4 and CO2 into synthesis gas (a mixture of CO and H2). However, these processes have many issues related to the harsh conditions of reaction used, the high carbon formation rate and the remarkable endothermicity of the reforming reactions. In this context, the use of the appropriate catalyst is of paramount importance to avoid deactivation, to deal with heat issues and mild reaction conditions and to attain an exploitable syngas composition. The development of a catalyst with high activity and stability can be achieved using different active phases, catalytic supports, promoters, preparation methods and catalyst configurations. In this paper, a review of the recent findings in biogas reforming is presented. The different elements that compose the catalytic system are systematically reviewed with particular attention on the new findings that allow to obtain catalysts with high activity, stability, and resistance towards carbon formation.