Modeling and simulation of photocatalytic CO2 reduction into methanol in a bubble slurry photoreactor

Pt-Cu@Bi2MoO6/TiO2 Photocatalyst for CO2 Reduction

Bi2MoO6/TiO2 heterojunction photocatalysts were constructed by depositing Bi2MoO6 nanosheets on TiO2 nanobelts' surface using a solvothermal method, and the surface of the optimum Bi2MoO6/TiO2 composite was decorated with copper and/or platinum nanoparticles. The synthesized samples were investigated for the CO2 photocatalytic reduction. The structural and optical properties of synthesized photocatalysts were characterized by XRD, FESEM, EDX, N2-physisorption, Raman, TPD-CO2, DRS, and PL analysis. The Bi2MoO6/TiO2 composite with different molar ratios of Bi2MoO6 to TiO2 (1, 1/2, 1/3, 1/4, 1/5, and 1/6) showed enhanced photocatalytic activity compared to pure Bi2MoO6 and TiO2. In comparison to bulk Bi2MoO6 and TiO2, the formation of a heterojunction between Bi2MoO6 and TiO2 leads to enhanced CO2 adsorption capacity. The enhanced performance of composites can be ascribed to the improved efficiency of light harvesting in the visible light range and suppressing charge recombination. The composite photocatalytic activity indicated that the ratio of Bi2MoO6 to TiO2 in the composite samples influenced the photocatalytic performance. The Bi2MoO6/TiO2 composite with 1/4 molar ratio had the best performance in 8 h (36.4 μmol/gcat), which was about 10 and 3 times higher than TiO2 and Bi2MoO6 photocatalysts, respectively. Under UV-visible light irradiation, the Pt-Cu@BMT4 sample produced the highest amount of methane (83.6 μmol/gcat) during CO2 photoreduction. During four irradiation cycles, the Pt-Cu@BMT4 sample exhibited superior stability with less than 5% decrease in methane production.

CFD modeling of ethylene degradation in gas-phase photocatalytic reactors

Photocatalytic oxidation is a promising technology to degrade volatile organic compounds. The performance of photocatalytic reactors is affected by the hydrodynamics, radiation transfer, mass transfer and reaction kinetics. Baffles may improve the hydrodynamics. The effect of baffles on heterogeneous photocatalytic oxidation of gas-phase ethylene in three annular reactors is simulated using computational fluid dynamics. ANSYS Fluent is used to solve all governing equations. Baffles can improve the uniformity of flow and prolong the residence time. The residence time of the C-type reactor and B-type reactor is 0.5% greater than the unbaffled reactor. Baffles have little effect on the radiation distribution. The concentric arrangement of lamp and the reactor leads to a radial dominance of radiation. The effect of baffles on the diffusion of ethylene is complex. The effective diffusion coefficient at the catalyst surface in the C-type reactor decreases 9.5% and that in the B-type reactor increases 3% with respect to the unbaffled reactor. The outlet ethylene concentration is 4.19 ppmv for the U-type reactor, 3.93 ppmv for the C-type reactor and 3.62 ppmv for the B-type reactor. The optimal performance in the B-type reactor is due to the large diffusion coefficient of ethylene. The arrangement of baffles should enlarge the effective diffusion coefficient at the catalyst surface as far as possible.