Smart Polymeric Materials

Fabrication, optimization, and in vitro validation of penicillin-loaded hydrogels for controlled drug delivery

Bacterial infections present a major global challenge. Penicillin, a widely used antibiotic known for its effectiveness and safety, is frequently prescribed. However, its short half-life necessitates multiple high-dose daily administrations, leading to severe side-effects. Therefore, this study aims to address these issues by developing hydrogels which control the release of penicillin and alleviate its adverse effects. Various combinations of aspartic acid and acrylamide were crosslinked by N', N'-methylene bisacrylamide through a free radical polymerization process to prepare aspartic acid/acrylamide (Asp/Am) hydrogels. The fabricated hydrogels underwent comprehensive characterization to assess physical properties and thermal stability. The soluble and insoluble fractions and porosity of the synthesized matrix were evaluated by sol-gel and porosity studies. Gel fraction was estimated at 88-96%, whereas sol fraction was found 12-4% and porosity found within the 63-78% range for fabricated hydrogel formulations. Maximum swelling and drug release were seen at pH 7.4, demonstrating a controlled drug release from hydrogel networks. The results showed that swelling, porosity, gel fraction, and drug release increased with higher concentrations of aspartic acid and acrylamide. However, integration of N', N'-methylene bisacrylamide exhibited the opposite effect on swelling and porosity, while increasing gel fraction. All formulations followed the Korsymer-Peppas model of kinetics with 'r' values within the range of 0.9740-0.9980. Furthermore, the cytotoxicity study indicated an effective and safe use of hydrogel because the cell viability was higher than 70%. Therefore, these prepared hydrogels show promise candidates for controlled release of Penicillin and are anticipated to be valuable in clinical applications.

Characterization of Modified PVDF Membranes Using Fourier Transform Infrared and Raman Microscopy and Infrared Nanoimaging: Challenges and Advantages of Individual Methods

Polymer materials are integral to diverse scientific fields, including chemical engineering and biochemical research, as well as analytical and physical chemistry. This study focuses on the characterization of modified poly(vinylidene fluoride) (PVDF) membranes from both physical and chemical perspectives. Unfortunately, current surface characterization methods face various challenges when simultaneously measuring diverse material properties such as morphology and chemical composition. Addressing this issue, we introduce infrared scattering scanning near-field optical microscopy (IR-sSNOM), a modern technique with the ability to overcome limitations and provide simultaneous topographical, mechanical, and chemical information. We demonstrate the capabilities of IR-sSNOM for investigation of four samples of PVDF membranes modified with 2-(methacryloyloxyethyl)trimethylammonium iodide and/or methacryloyloxyethyl phosphorylcholine in various ratios. These membranes, desirable for their specific properties, represent a challenging material for analysis due to their thermal instability and mechanical vulnerability. Employing Fourier transform infrared (FTIR) microscopy, IR-sSNOM, and Raman microscopy, we successfully overcame these challenges by carefully selecting the experimental parameters and performing detailed characterization of the polymer samples. Valuable insights into morphological and chemical homogeneity, the abundance of modifying side chains, and the distribution of different crystal phases of PVDF were obtained. Most notably, the presence of modifying side chains was confirmed by FTIR microscopy, the Raman spectral mapping revealed the distribution of crystalline phases of the studied polymer, and the IR-sSNOM showed the abundance of chemically diverse aggregates on the surface of the membranes, thanks to the unique nanometer-scale resolution and chemical sensitivity of this technique. This comprehensive approach represents a powerful toolset for characterization of polymeric materials at the nano- and microscale. We believe that this methodology can be applied to similar samples, provided that their thermal stability is considered, opening avenues for detailed exploration of physical and chemical properties in various scientific applications.

Surface Modification Progress for PLGA-Based Cell Scaffolds

Poly(lactic-glycolic acid) (PLGA) is a biocompatible bio-scaffold material, but its own hydrophobic and electrically neutral surface limits its application as a cell scaffold. Polymer materials, mimics ECM materials, and organic material have often been used as coating materials for PLGA cell scaffolds to improve the poor cell adhesion of PLGA and enhance tissue adaptation. These coating materials can be modified on the PLGA surface via simple physical or chemical methods, and coating multiple materials can simultaneously confer different functions to the PLGA scaffold; not only does this ensure stronger cell adhesion but it also modulates cell behavior and function. This approach to coating could facilitate the production of more PLGA-based cell scaffolds. This review focuses on the PLGA surface-modified materials, methods, and applications, and will provide guidance for PLGA surface modification.

Electrochemical and Biocatalytic Signal-Controlled Payload Release from a Metal-Organic Framework

A metal-organic framework (MOF), ZIF-8, which is stable at neutral and slightly basic pH values in aqueous solutions and destabilized/dissolved under acidic conditions, is loaded with a pH-insensitive fluorescent dye, rhodamine-B isothiocyanate, as a model payload species. Then, the MOF species are immobilized at an electrode surface. The local (interfacial) pH value is rapidly decreased by means of an electrochemically stimulated ascorbate oxidation at +0.4 V (Ag/AgCl/KCl). Oxygen reduction upon switching the applied potential to -0.8 V allows to return the local pH to the neutral/basic pH, then stopping rapidly the release process. The developed method allows electrochemical control over stimulated or inhibited payload release processes from the MOF. The pH variation proceeds in a thin film of the solution near the electrode surface. The switchable release process is realized in a buffer solution and undiluted human serum. As the second option, the pH decrease stimulating the release process is achieved upon an enzymatic reaction using esterase and ester substrate. This approach potentially allows the release activation controlled by numerous enzymes assembled in complex biocatalytic cascades. It is expected that related electrochemical or biocatalytic systems can represent novel signal-responding materials with switchable features for delivering (bio)molecules within biomedical applications.

Sustainable SMART fertilizers in agriculture systems: A review on fundamentals to in-field applications

Agriculture will face the issue of ensuring food security for a growing global population without compromising environmental security as demand for the world's food systems increases in the next decades. To provide enough food and reduce the harmful effects of chemical fertilization and improper disposal or reusing of agricultural wastes on the environment, will be required to apply current technologies in agroecosystems. Combining biotechnology and nanotechnology has the potential to transform agricultural practices and offer answers to both immediate and long-term issues. This review study seeks to identify, categorize, and characterize the so-called smart fertilizers as the future frontier of sustainable agriculture. The conventional fertilizer and smart fertilizers in general are covered in the first section of this review. Another key barrier preventing the widespread use of smart fertilizers in agriculture is the high cost of materials. Nevertheless, smart fertilizers are widely represented on the world market and are actively used in farms that have already switched to sustainable technologies. The advantages and disadvantages of various raw materials used to create smart fertilizers, with a focus on inorganic and organic materials, synthetic and natural polymers, along with their physical and chemical preparation processes, are contrasted in the following sections. The rate and the mechanism of release are covered. The purpose of this study is to provide a deep understanding of the advancements in smart fertilizers during the last ten years. Trends are also recognized and studied to provide insight for upcoming agricultural research projects.

Modeling the Phase Transition in Hydrophobic Weak Polyelectrolyte Gels under Compression

One of the emerging water desalination techniques relies on the compression of a polyelectrolyte gel. The pressures needed reach tens of bars, which are too high for many applications, damage the gel and prevent its reuse. Here, we study the process by means of coarse-grained simulations of hydrophobic weak polyelectrolyte gels and show that the necessary pressures can be lowered to only a few bars. We show that the dependence of applied pressure on the gel density contains a plateau indicating a phase separation. The phase separation was also confirmed by an analytical mean-field theory. The results of our study show that changes in the pH or salinity can induce the phase transition in the gel. We also found that ionization of the gel enhances its ion capacity, whereas increasing the gel hydrophobicity lowers the pressure required for gel compression. Therefore, combining both strategies enables the optimization of polyelectrolyte gel compression for water desalination purposes.

Characterization and structure-property relationships of an injectable thiol-Michael addition hydrogel toward compatibility with glioblastoma therapy

Glioblastoma multiforme (GBM) is an aggressive primary brain cancer and although patients undergo surgery and chemoradiotherapy, residual cancer cells still migrate to healthy brain tissue and lead to tumor relapse after treatment. New therapeutic strategies are therefore urgently needed to better mitigate this tumor recurrence. To address this need, we envision after surgical removal of the tumor, implantable biomaterials in the resection cavity can treat or collect residual GBM cells for their subsequent eradication. To this end, we systematically characterized a poly(ethylene glycol)-based injectable hydrogel crosslinked via a thiol-Michael addition reaction by tuning its hydration level and aqueous NaHCO₃ concentration. The physical and chemical properties of the different formulations were investigated by assessing the strength and stability of the polymer networks and their swelling behavior. The hydrogel biocompatibility was assessed by performing in vitro cytotoxicity assays, immunoassays, and immunocytochemistry to monitor the reactivity of astrocytes cultured on the hydrogel surface over time. These characterization studies revealed key structure-property relationships. Furthermore, the results indicated hydrogels synthesized with 0.175 M NaHCO₃ and 50 wt% water content swelled the least, possessed a storage modulus that can withstand high intracranial pressures while avoiding a mechanical mismatch, had a sufficiently crosslinked polymer network, and did not degrade rapidly. This formulation was not cytotoxic to astrocytes and produced minimal immunogenic responses in vitro. These properties suggest this hydrogel formulation is the most optimal for implantation in the resection cavity and compatible toward GBM therapy. STATEMENT OF SIGNIFICANCE: Survival times for glioblastoma patients have not improved significantly over the last several decades, as cancer cells remain after conventional therapies and form secondary tumors. We characterized a biodegradable, injectable hydrogel to reveal structure-property relationships that can be tuned to conform the hydrogel toward glioblastoma therapy. Nine formulations were systematically characterized to optimize the hydrogel based on physical, chemical, and biological compatibility with the glioblastoma microenvironment. This hydrogel can potentially be used for adjuvant therapy to glioblastoma treatment, such as by providing a source of molecular release for therapeutic agents, which will be investigated in future work. The optimized formulation will be developed further to capture and eradicate glioblastoma cells with chemical and physical stimuli in future research.

PLGA-Based Composites for Various Biomedical Applications

Polymeric materials have been extensively explored in the field of nanomedicine; within them, poly lactic-co-glycolic acid (PLGA) holds a prominent position in micro- and nanotechnology due to its biocompatibility and controllable biodegradability. In this review we focus on the combination of PLGA with different inorganic nanomaterials in the form of nanocomposites to overcome the polymer’s limitations and extend its field of applications. We discuss their physicochemical properties and a variety of well-established synthesis methods for the preparation of different PLGA-based materials. Recent progress in the design and biomedical applications of PLGA-based materials are thoroughly discussed to provide a framework for future research.

Polyelectrolyte Gels: A Unique Class of Soft Materials

The objective of this article is to introduce the readers to the field of polyelectrolyte gels. These materials are common in living systems and have great importance in many biomedical and industrial applications. In the first part of this paper, we briefly review some characteristic properties of polymer gels with an emphasis on the unique features of this type of soft material. Unsolved problems and possible future research directions are highlighted. In the second part, we focus on the typical behavior of polyelectrolyte gels. Many biological materials (e.g., tissues) are charged (mainly anionic) polyelectrolyte gels. Examples are shown to illustrate the effect of counter-ions on the osmotic swelling behavior and the kinetics of the swelling of model polyelectrolyte gels. These systems exhibit a volume transition as the concentration of higher valence counter-ions is gradually increased in the equilibrium bath. A hierarchy is established in the interaction strength between the cations and charged polymer molecules according to the chemical group to which the ions belong. The swelling kinetics of sodium polyacrylate hydrogels is investigated in NaCl solutions and in solutions containing both NaCl and CaCl₂. In the presence of higher valence counter-ions, the swelling/shrinking behavior of these gels is governed by the diffusion of free ions in the swollen network, the ion exchange process and the coexistence of swollen and collapsed states.

Textile Materials Modified with Stimuli-Responsive Drug Carrier for Skin Topical and Transdermal Delivery

Textile materials, as a suitable matrix for different active substances facilitating their gradual release, can have an important role in skin topical or transdermal therapy. Characterized by compositional and structural variety, those materials readily meet the requirements for applications in specific therapies. Aromatherapy, antimicrobial substances and painkillers, hormone therapy, psoriasis treatment, atopic dermatitis, melanoma, etc., are some of the areas where textiles can be used as carriers. There are versatile optional methods for loading the biologically active substances onto textile materials. The oldest ones are by exhaustion, spraying, and a pad-dry-cure method. Another widespread method is the microencapsulation. The modification of textile materials with stimuli-responsive polymers is a perspective route to obtaining new textiles of improved multifunctional properties and intelligent response. In recent years, research has focused on new structures such as dendrimers, polymer micelles, liposomes, polymer nanoparticles, and hydrogels. Numerous functional groups and the ability to encapsulate different substances define dendrimer molecules as promising carriers for drug delivery. Hydrogels are also high molecular hydrophilic structures that can be used to modify textile material. They absorb a large amount of water or biological fluids and can support the delivery of medicines. These characteristics correspond to one of the current trends in the development of materials used in transdermal therapy, namely production of intelligent materials, i.e., such that allow controlled concentration and time delivery of the active substance and simultaneous visualization of the process, which can only be achieved with appropriate and purposeful modification of the textile material.

Femto- to Millisecond Time-Resolved Photodynamics of a Double-Functionalized Push-Pull Organic Linker: Potential Candidate for Optoelectronically Active MOFs

The design of improved organic linkers for the further engineering of smarter metal–organic framework (MOF) materials has become a paramount task for a wide number of material scientists. In this report, a luminescent double-functionalized push–pull (electron donor–acceptor) archetype organic molecule, dimethyl 4-amino-8-cyanonaphthalene-2,6-dicarboxylate (Me₂CANADC), has been synthesized and characterized. The optical steady-state properties of Me₂CANADC are strongly influenced by the surrounding environment as a direct consequence of its strong charge transfer (CT) character. The relaxation from its first electronically excited singlet state follows a double pathway: (1) on one side deactivating from its local excited (LE) state in the sub-picosecond or picosecond time domain, and (2) on the other side undergoing an ultrafast intramolecular charge transfer (ICT) reaction that is slowing down in viscous solvents. The deactivation to the ground state of these species with CT character is the origin of the Me₂CANADC luminescence, and they present solvent-dependent lifetime values ranging from 8 to 18 ns. The slow photodynamics of Me₂CANADC unveils the coexistence of a non-emissive triplet excited state and the formation of a long-lived charge separated state (2 µs). These observations highlight the promising optical properties of Me₂CANADC linker, opening a window for the design of new functional MOFs with huge potential to be applied in the fields of luminescent sensing and optoelectronics.

Emerging Strategies in Stimuli-Responsive Nanocarriers as the Drug Delivery System for Enhanced Cancer Therapy

The conventional Drug Delivery System (DDS) has limitations such as leakage of the drug, toxicity to normal cells and loss of drug efficiency, while the stimuli-responsive DDS is non-toxic to cells, avoiding the leakage and degradation of the drug because of its targeted drug delivery to the pathological site. Thus nanomaterial chemistry enables - the development of smart stimuli-responsive DDS over the conventional DDS. Stimuliresponsive DDS ensures spatial or temporal, on-demand drug delivery to the targeted cancer cells. The DDS is engineered by using the organic (synthetic polymers, liposomes, peptides, aptamer, micelles, dendrimers) and inorganic (zinc oxide, gold, magnetic, quantum dots, metal oxides) materials. Principally, these nanocarriers release the drug at the targeted cells in response to external and internal stimuli such as temperature, light, ultrasound and magnetic field, pH value, redox potential (glutathione), and enzyme. The multi-stimuli responsive DDS is more promising than the single stimuli-responsive DDS in cancer therapy, and it extensively increases drug release and accumulation in the targeted cancer cells, resulting in better tumor cell ablation. In this regard, a handful of multi-stimuli responsive DDS is in clinical trials for further approval. A comprehensive review is crucial for addressing the existing knowledge about multi-stimuli responsive DDS, and hence, we summarized the emerging strategies in tailored ligand functionalized stimuli-responsive nanocarriers as the DDS for cancer therapies.

A Temperature-Responsive Copper Molybdate Polymorph Mixture near to Water Boiling Point by a Simple Cryogenic Quenching Route

Smart temperature-responsive inorganic materials in accessible temperature ranges open up new positions in the technology. Herein, we present for the first time a CuMoO₄ polymorph mixture prepared by a simple cryogenic quenching approach, which offers a fast temperature response close to water boiling temperature for use as a permanent temperature recorder. The new cryogenic quenching technique initiates the formation of a unique polymorph mixture of a deep brown color with a nonuniform combination of γ- and α-CuMoO₄, with the γ phase being confined to the outer region of α-CuMoO₄, which has been prepared by conventional solid-state synthesis. In situ structural analysis and refinement results confirm the presence of CuMoO₄ α and γ polymorphs in which the amount of γ polymorph decreases and that of the α phase increases with temperature, accounting for the irreversible thermochromic behavior. The thermal analysis reveals that the polymorph mixture exhibits a fast response with the color changing from deep brown to bright green with intermediate colors of light brown, yellowish green, and light green depending on the exposure temperature as observed from reflectance measurements.

Novel insights into membrane fouling caused by gel layer in a membrane bioreactor: Effects of hydrogen bonding

Gel layer formation in some cases directly determines membrane fouling extent in membrane bioreactors (MBRs). While hydrogen bonding interactions extensively exist in gelling foulants and sludge suspension, their exact roles in fouling remain unveiled. Filtration results in this study showed that, specific filtration resistance (SFR) of a gel layer formed in the MBR was as high as 2.06 × 10¹⁹ m^-1·kg^-1 at 20 °C, and moreover, SFR of both the real gel and model gel (Poly(N-isopropylacrylamide) (PNIPAM)) decreased with temperature. Fourier-transform infrared spectroscopy (FTIR) analysis indicated that gel samples were abundant of good hydrogen bonding donors/acceptors to form hydrogen bonding, and hydrogen bonding strength decreased with temperature. From viewpoint of free energy, mathematical models depicting roles of hydrogen bonding were proposed. For the first time, contribution level of hydrogen bonding effects to total gel SFR was quantified to be around 20%. These results offered in-depth insights into membrane fouling in MBRs.

Bioresponse Inspired Nanomaterials for Targeted Drug and Gene Delivery

The traditional drug delivery techniques are unresponsive to the altering metabolic states of the body and fail to achieve target specific drug delivery, which results in toxic plasma concentrations. In order to harmonize the drug release profiles, diverse biological and pathological pathways and factors involved have been studied and consequently, nanomaterials and nanostructures are engineered in a manner so that they respond and interact with the target cells and tissues in a controlled manner to induce promising pharmacological responses with least undesirable effects. The bioinspired nanoparticles such as carbon nanotubes, metallic nanoparticles, and quantum dots sense the localized host environment for diagnosis and treatment of pathological states. These biocompatible polymeric- based nanostructures bind drugs to the specific receptors, which renders them as ideal vehicles for the delivery of drugs and gene. The ultimate goal of bioinspired nanocomposites is to achieve personalized diagnostic and therapeutic outcomes. This review briefly discussed current trends; role, recent advancements as well as different approaches, which are being used for designing and fabrication of some bioinspired nanocarriers.

Biological Self-Assembly and Recognition Used to Synthesize and Surface Guide Next Generation of Hybrid Materials

Free-standing, high aspect ratio sulfur-doped carbon nanodot-based hybrid nanowires with a microtubular aspect were synthesized using self-recognition and self-assembly processes of tubulin, a biological molecule precursor of the cytoskeletal microtubule. Physicochemical characterizations (e.g., morphology, diameter, spectral characteristics, etc.) of such user-synthesized hybrid bionanowires were performed using classical atomic and spectroscopic techniques, whereas bioactivity and functionality testing was demonstrated by mimicking cellular transport based on kinesin, a motor protein capable to recognize, and move on the microtubules. Our results indicate that user-synthesized hybrid nanowires could be manipulated in vitro under constant chemical energy of adenosine triphosphate and have the potential to be implemented in the next generation of synthetic applications from drug delivery to diagnosis systems, and photocatalytic to optical devices.

Photo-Cross-Linked Self-Assembled Poly(ethylene oxide)-Based Hydrogels Containing Hybrid Junctions with Dynamic and Permanent Cross-Links

Homogeneous hydrogels were formed by self-assembly of triblock copolymers via association of small hydrophobic end blocks into micelles bridged by large poly(ethylene oxide) central blocks. A fraction of the end blocks were photo-cross-linkable and could be rapidly cross-linked covalently by in situ UV irradiation. In this manner networks were formed with well-defined chain lengths between homogeneously distributed hybrid micelles that contained both permanent and dynamically cross-linked end blocks. Linear rheology showed a single relaxation mode before in situ irradiation intermediate between those of the individual networks. The presence of transient cross-links decreased the percolation threshold of the network rendered permanent by irradiation and caused a strong increase of the elastic modulus at lower polymer concentrations. Large amplitude oscillation and tensile tests showed significant increase of the fracture strain caused by the dynamic cross-links.

Plasma dye coating as straightforward and widely applicable procedure for dye immobilization on polymeric materials

Here, we introduce a novel concept for the fabrication of colored materials with significantly reduced dye leaching through covalent immobilization of the desired dye using plasma-generated surface radicals. This plasma dye coating (PDC) procedure immobilizes a pre-adsorbed layer of a dye functionalized with a radical sensitive group on the surface through radical addition caused by a short plasma treatment. The non-specific nature of the plasma-generated surface radicals allows for a wide variety of dyes including azobenzenes and sulfonphthaleins, functionalized with radical sensitive groups to avoid significant dye degradation, to be combined with various materials including PP, PE, PA6, cellulose, and PTFE. The wide applicability, low consumption of dye, relatively short procedure time, and the possibility of continuous PDC using an atmospheric plasma reactor make this procedure economically interesting for various applications ranging from simple coloring of a material to the fabrication of chromic sensor fabrics as demonstrated by preparing a range of halochromic materials.

Efficient light harvesting within a C153@Zr-based MOF embedded in a polymeric film: spectral and dynamical characterization

Energy transfer within a hybrid C153@Zr-NDC composite material incorporated into PC films. M* and (E*) are the excited monomers and excimers of the MOF, respectively. C153 is Coumarin 153.

Amphiphilic and double hydrophilic block copolymers containing a polydehydroalanine block

We present the synthesis and characterization of amphiphilic and double hydrophilic block copolymers containing a polydehydroalanine (PDha) block.