Potential of multisyringe chromatography for the on-line monitoring of the photocatalytic degradation of antituberculosis drugs in aqueous solution

Pyrazinamide photodegradation on NiWO4-palygorskite nanocomposites under polychromatic irradiation

In this work, antibiotic pyrazinamide (PZA) photodegradation on palygorskite (Pal), NiWO₄ crystals, and NiWO₄-Pal (2, 6, and 10%) nanocomposites was evaluated under polychromatic irradiation. In the characterization of the samples, XRD patterns displayed good crystallinity for NiWO₄ crystals and nanocomposites. In addition, the diffractograms were used in the Rietveld refinement for phase indexing, revealing a wolframite-type monoclinic structure with the space group P2/c. The active vibrational modes related to the characteristic groups of the samples were identified using Raman and FTIR spectroscopy. Photoluminescence (PL) spectra revealed that NiWO₄ and NiWO₄-Pal (2%) nanocomposite have the highest electron-hole pair recombination rate, and the contribution of the green component in the NiWO₄-Pal (2%) nanocomposite indicates a greater contribution of deep energy levels to the PL profile. DRS in the UV-visible region indicated that NiWO₄ crystals have indirect band-gap energy (E_gap) 2.64 eV; NiWO₄-Pal (2, 6, and 10%) nanocomposites have 2.62, 2.58, and 2.59 eV, respectively; and Pal has 2.83 eV. The catalytic tests showed that the NiWO₄-Pal (2%) nanocomposite samples, under polychromatic radiation, exhibit greater efficiency in photodegradation at 110 min, with yield of 98.5%. The ROS tests indicated that the studied reactive species play a similar role in PZA photodegradation.

Degradation of isoniazid by anodic oxidation and subcritical water oxidation methods: Application of Box-Behnken design

Pharmaceutical compounds released into the aquatic environment are known to cause toxic effects on the environment. Isoniazid is widely used in the treatment of tuberculosis and is, therefore, frequently encountered in environmental waters. In this study, the degradation of isoniazid was investigated by anodic oxidation and subcritical water oxidation method which are members of Advanced Oxidation Processes. The Box-Behnken Design was used to determine the effects of current, initial concentration, and electrolysis time on mineralization in the anodic oxidation process, which carried out a cell with a Pt cathode and boron-doped diamond anode. The highest mineralization value of 78.14% was achieved at optimal conditions of 300 mA, 3 h, and 100 mg/L initial concentration. The degradation of Isoniazid was also investigated under subcritical water conditions using an ecological oxidizing agent, H₂O₂. The maximum mineralization rate of 72.23% was obtained when 100 mM H₂O₂ was used for a 90 min treatment at 125 °C for 100 mg/L Isoniazid solution in the subcritical water oxidation process. The LC-MS results showed that the degradation products obtained by AO and SWO methods were different from each other. Finally, possible degradation mechanisms are proposed according to the degradation products obtained for both processes.

Solid base Mg-doped ZnO for heterogeneous catalytic ozonation of isoniazid: Performance and mechanism

Magnesium-doped ZnO (denoted as x-MgZnO where x represented the molar ratio of Mg to the sum of Mg and Zn) powders synthesized by the traditional thermal decomposition were used as catalysts for ozonation of isoniazid (20 mg/L) at the initial pH of 7.2. Magnesium substituted zinc in wurtzite structure and the Zn-O-Mg bond was formed in Mg-doped ZnO on the basis of the results of X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS) analyses. The removal efficiencies of isoniazid were enhanced in Mg-doped ZnO catalytic ozonation processes (57.7% by 0.05-MgZnO and 76.3% by 0.10-MgZnO in 9 min), compared with ozonation alone (50.5%) and ZnO catalytic ozonation (49.5%). The removal efficiencies of total organic carbon (TOC) were also improved in Mg-doped ZnO catalytic ozonation processes. When the initial pH of 7.2 was lower than the pH_PZC (point of zero charge) of Mg-doped ZnO, surface hydroxyl groups of the catalysts were protonated and the solution pH gradually increased during Mg-doped ZnO catalytic ozonation. The increase in the solution pH value mainly induced ozone decomposition into superoxide radical (O₂^-). Furthermore, protonated surface hydroxyl groups (S-OH₂⁺) on Mg-doped ZnO also contributed a little to ozone decomposition. The 0.10-MgZnO powder showed high stability after continuous use in the process. Additionally, we proposed a possible degradation pathway for the oxidation of isoniazid in Mg-doped ZnO catalytic ozonation on the basis of intermediates detected. This work provides an insight into the mechanism for basic sites of solid base in heterogeneous catalytic ozonation.

Oxidative degradation of gentamicin present in water by an electro-Fenton process and biodegradability improvement

In the context of environmental protection, where there is a need to develop effective operations for carrying out appropriate treatment of polluted water by pharmaceuticals. Therefore, the present study aims at evaluating the degradation for gentamicin through electro-Fenton (EF) operation, through taking into consideration the effect of several parameters of experimental in the process, namely, the concentration of initial gentamicin, the applied current and the Fe+2 (II) quantities. The (EF) operation employed involves a carbon-felt as cathode and platinum as anode at pH 3. Studies for the gentamicin kinetics is monitored by HPLC giving a pseudo-first order reaction following by a chemical oxygen demand, with a reached degree of mineralization 96% after of four hours of treatment through current 100 mA/cm2 with 0.1 mM of Fe+2. We find that the degradation for molecule of gentamicin is accompanied by an augmentation of the biodegradability, assesse through the Biochemical Oxygen Demand (BOD5) on chemical oxygen demand (COD) ratio, that augmentation from 0 to 0.41 before treatment after 30 min for EF treatment, showing that there is potential for conjugation of the EF process and the biological process. Furthermore, the by-products have been identified on the basis of HPLC-MS/MS results.

Antituberculosis drug isoniazid degraded by electro-Fenton and photoelectro-Fenton processes using a boron-doped diamond anode and a carbon-PTFE air-diffusion cathode

Solutions with 0.65 mM of the antituberculosis drug isoniazid (INH) in 0.050 M Na₂SO₄ at pH 3.0 were treated by electro-Fenton (EF) and UVA photoelectro-Fenton (PEF) processes using a cell with a BDD anode and a carbon-PTFE air-diffusion cathode. The influence of current density on degradation, mineralization rate, and current efficiency has been thoroughly evaluated in EF. The effect of the metallic catalyst (Fe²⁺ or Fe³⁺) and the formation of products like short-chain linear aliphatic carboxylic acids were assessed in PEF. Two consecutive pseudo-first-order kinetic regions were found using Fe²⁺ as catalyst. In the first region, at short time, the drug was rapidly oxidized by ^●OH, whereas in the second region, at longer time, a resulting Fe(III)-INH complex was much more slowly removed by oxidants. INH disappeared completely at 300 min by EF, attaining 88 and 94% mineralization at 66.6 and 100 mA cm^-2, respectively. Isonicotinamide and its hydroxylated derivative were identified as aromatic products of INH by GC-MS and oxalic, oxamic, and formic acids were quantified by ion-exclusion HPLC. The PEF treatment of a real wastewater polluted with the drug led to slower INH and TOC abatements because of the parallel destruction of its natural organic matter content.

Automated on-line monitoring of the TiO2-based photocatalytic degradation of dimethyl phthalate and diethyl phthalate

An automated on-line system for monitoring the TiO₂-based photocatalytic degradation of dimethyl phthalate and diethyl phthalate.

Hierarchical flower-like NiAl-layered double hydroxide microspheres encapsulated with black Cu-doped TiO2 nanoparticles: Highly efficient visible-light-driven composite photocatalysts for environmental remediation

Herein, highly efficient composite photocatalysts comprising black Cu-doped TiO₂ nanoparticles (BCT) encapsulated within hierarchical flower-like NiAl-layered double hydroxide (LDH) microspheres were fabricated via a one-step hydrothermal route. Cu-doping and subsequent reduction treatment led to extended visible-light absorption of TiO₂ in the resulting composites, as confirmed by ultraviolet-visible diffuse reflectance spectral analysis. Moreover, thorough investigations confirmed the strong interactions between LDH and BCT in the resulting BCT/LDH composites. Notably, the BCT/LDH composites exhibited remarkable performance in the degradation of hazardous materials (methyl orange and isoniazid), superior to that of the individual components, reference P25, and P25/LDH under visible-light irradiation. Moreover, the BCT/LDH composite containing 30 wt% of BCT displayed the highest photocatalytic performance among the synthesized photocatalysts and also exhibited high stability during recycling tests with no obvious change in the activity. The superior photodegradation activity of the BCT/LDH composites was primarily attributed to efficient transfer and separation of the photoinduced charge carriers, resulting from the intimate contact interfaces between LDH and BCT. This approach represents a promising route for the rational design of highly efficient and visible-light-active LDH-based composite photocatalysts for application in energy harvesting and environmental protection.

Facile Synthesis of Novel Redox-Mediator-free Direct Z-Scheme CaIn2S4 Marigold-Flower-like/TiO2 Photocatalysts with Superior Photocatalytic Efficiency

Novel redox-mediator-free direct Z-scheme CaIn2S4 marigold-flower-like/TiO2 (CIS/TNP) photocatalysts with different CaIn2S4 weight percentages were synthesized using a facile wet-impregnation method. Uniform hierarchical marigold-flower-like CaIn2S4 (CIS) microspheres were synthesized using a hydrothermal method. Field-emission scanning electron microscopy and transmission electron microscopy analyses suggested that the formation and aggregation of nanoparticles, followed by the growth of petals or sheets and their subsequent self-assembly, led to the formation of the uniform hierarchical marigold-flower-like CIS structures. The photocatalytic degradation efficiency of the direct Z-scheme CIS/TNP photocatalysts was evaluated through the degradation of the pharmaceutical compounds isoniazid (ISN) and metronidazole (MTZ). The direct Z-scheme CaIn2S4 marigold-flower-like/TiO2 (1%-CIS/TNP) photocatalyst showed enhanced performance in the ISN (71.9%) and MTZ (86.5%) photocatalytic degradations as compared to composites with different CaIn2S4 contents or the individual TiO2 and CaIn2S4. A possible enhancement mechanism based on the Z-scheme formed between the CIS and TNP for the improved photocatalytic efficiency was also proposed. The recombination rate of the photoinduced charge carriers was significantly suppressed for the direct Z-scheme CIS/TNP photocatalyst, which was confirmed by photoluminescence analysis. Radical-trapping studies revealed that photogenerated holes (h+), •OH, and O2•- are the primary active species, and suggested that the enhanced photocatalytic efficiency of the 1%-CIS/TNP follows the Z-scheme mechanism for transferring the charge carriers. It was further confirmed by hydroxyl (•OH) radical determination via fluorescence techniques revealed that higher concentration of •OH radical were formed over 1%-CIS/TNP than over bare CIS and TNP. The separation of the charge carriers was further confirmed using photocurrent and electron spin resonance measurements. Kinetic and chemical oxygen demand analyses were performed to confirm the ISN and MTZ degradation. The results demonstrated that the direct Z-scheme CIS/TNP photocatalyst shows superior decomposition efficiency for the degradation of these pharmaceuticals under the given reaction conditions.