Confocal Raman microscopy and fluorescent in situ hybridization - A complementary approach for biofilm analysis

In vivo Raman spectroscopic and fluorescence study of suspected melanocytic lesions and surrounding healthy skin

Cutaneous melanoma is the most lethal skin cancer and noninvasively distinguishing it from benign tumor is a major challenge. Raman spectroscopic measurements were conducted on 65 suspected melanocytic lesions and surrounding healthy skin from 47 patients. Compared to the spectra of healthy skin, spectra of melanocytic lesions exhibited lower intensities in carotenoid bands and higher intensities in lipid and melanin bands, suggesting similar variations in the content of these components. Distinct variations were observed among the autofluorescence intensities of healthy skin, benign nevi and malignant melanoma. By incorporating autofluorescence information, the classification accuracy of the support vector machine for spectra of healthy skin, nevi, and melanoma reached 90.2%, surpassing the 87.9% accuracy achieved without autofluorescence, with this difference being statistically significant. These findings indicate the diagnostic value of autofluorescence intensity, which reflect differences in fluorophore content, chemical composition, and structure among healthy skin, nevi, and melanoma.

A Review on Ion-Exchange Membrane Fouling during the Electrodialysis Process in the Food Industry, Part 1: Types, Effects, Characterization Methods, Fouling Mechanisms and Interactions

Electrodialysis (ED) was first established for water desalination and is still highly recommended in this field for its high water recovery, long lifetime and acceptable electricity consumption. Today, thanks to technological progress in ED processes and the emergence of new ion-exchange membranes (IEMs), ED has been extended to many other applications in the food industry. This expansion of uses has also generated several problems such as IEMs' lifetime limitation due to different ageing phenomena (because of organic and/or mineral compounds). The current commercial IEMs show excellent performance in ED processes; however, organic foulants such as proteins, surfactants, polyphenols or other natural organic matters can adhere on their surface (especially when using anion-exchange membranes: AEMs) forming a colloid layer or can infiltrate the membrane matrix, which leads to the increase in electrical resistance, resulting in higher energy consumption, lower water recovery, loss of membrane permselectivity and current efficiency as well as lifetime limitation. If these aspects are not sufficiently controlled and mastered, the use and the efficiency of ED processes will be limited since, it will no longer be competitive or profitable compared to other separation methods. In this work we reviewed a significant amount of recent scientific publications, research and reviews studying the phenomena of IEM fouling during the ED process in food industry with a special focus on the last decade. We first classified the different types of fouling according to the most commonly used classifications. Then, the fouling effects, the characterization methods and techniques as well as the different fouling mechanisms and interactions as well as their influence on IEM matrix and fixed groups were presented, analyzed, discussed and illustrated.

Calcium carbonate deposits and microbial assemblages on microplastics in oligotrophic freshwaters

Microplastics are solid polymer particles with a wide variety of surface properties, found in most waterbodies, and known as carriers of distinct microbial communities affecting the fate of the particles in the environment. Little is known about the formation of mineral deposits on microplastics and how these deposits connect to microbial assemblages and affect the physicochemical properties of the particles. In addition, most of the available research on this topic is based on large microplastics with sizes between 100 μm and up to 5 mm, rather than the small microplastics often found in drinking water sources. To narrow this gap in our understanding of environmental effects on small microplastics, two types of small microplastics made of two distinct polymers, poly(methyl methacrylate) (PMMA) and poly(tetrafluoroethylene) (PTFE) with sizes ranging from 15 to 150 μm, were incubated for six months in unprocessed and processed drinking water with increasing ionic concentration to allow for the formation of mineral deposits and microbial assemblages. Spatially resolved analysis with fluorescent in situ hybridization and confocal Raman microscopic imaging revealed deposits of calcium carbonates and scattered microbial assemblages on all microplastics, with structure, extend, and microbial association with the carbonates depending on the respective microplastic. Notably, PTFE floatation was overcome after three months in unprocessed drinking water but remained unchanged in processed drinking water, whereas PMMA appeared unaffected, indicating that the fate of microplastics in the environment may depend on polymer type and the encountered aquatic conditions forming mineral and microbial attachments to the particle surface.

Advances in single cell Raman spectroscopy technologies for biological and environmental applications

The increasing sophistication of single cell Raman spectroscopy (SCRS) via its integrations with other advanced analytical techniques and modern data analytics, enable unprecedented exploration of complex biological and environmental samples with significantly improved specificity, sensitivity, and resolution. Because of the merits of being high-resolution, label-free, non-invasive, molecular-specific, culture-independent, and suitable for in situ, in vitro or in vivo analysis, the SCRS-derived techniques offer abilities superior to conventional bulk measurements for environmental and biological studies. Here, we provide a comprehensive and critical review of the most recent advances in the development and application of SCRS-enabled technologies, with focus on those biomolecular and cellular high-resolution applications in environmental and biological fields. The basic principles, unique advantages, and suitable applications, as well as recognized limitations for each technology are recapitulated. The remaining challenges, research needs and future outlook are discussed. We predict that SCRS-enabled technologies are earning its place as a routine and powerful tool in many and rapidly expanding applications across disciplines.

Small Sample Stress: Probing Oxygen-Deprived Ammonia-Oxidizing Bacteria with Raman Spectroscopy In Vivo

The stress response of ammonia-oxidizing bacteria (AOB) to oxygen deprivation limits AOB growth and leads to different nitrification pathways that cause the release of greenhouse gases. Measuring the stress response of AOB has proven to be a challenge due to the low growth rates of stressed AOB, making the sample volumes required to monitor the internal stress response of AOB prohibitive to repeated analysis. In a proof-of-concept study, confocal Raman microscopy with excitation resonant to the heme c moiety of cytochrome c was used to compare the cytochrome c content and activity of stressed and unstressed Nitrosomonas europaea (Nm 50), Nitrosomonas eutropha (Nm 57), Nitrosospira briensis (Nsp 10), and Nitrosospira sp. (Nsp 02) in vivo. Each analysis required no more than 1000 individual cells per sampling; thus, the monitoring of cultures with low cell concentrations was possible. The identified spectral marker delivered reproducible results within the signal-to-noise ratio of the underlying Raman spectra. Cytochrome c content was found to be elevated in oxygen-deprived and previously oxygen-deprived samples. In addition, cells with predominantly ferrous cytochrome c content were found in deprived Nitrosomonas eutropha and Nitrosospira samples, which may be indicative of ongoing electron storage at the time of measurement.

Femtosecond laser induced step-like structures inside transparent hydrogel due to laser induced threshold reduction

In the area of laser material processing, versatile applications for cutting glasses and transparent polymers exist. However, parasitic effects such as the creation of step-like structures appear when laser cutting inside a transparent material. To date, these structures were only described empirically. This work establishes the physical and chemical mechanisms behind the observed effects and describes the influence of process and material parameters onto the creation of step-like structures in hydrogel, Dihydroxyethylmethacrylat (HEMA). By focusing laser pulses in HEMA, reduced pulse separation distance below 50 nm and rise in pulse energy enhances the creation of unintended step-like structures. Spatial resolved Raman-spectroscopy was used to measure the laser induced chemical modification, which results into a reduced breakdown threshold. The reduction in threshold influences the position of optical breakdown for the succeeding laser pulses and consequently leads to the step-like structures. Additionally, the experimental findings were supplemented with numerical simulations of the influence of reduced damage threshold onto the position of optical breakdown.

In summary, chemical material change was defined as cause of the step-like structures. Furthermore, the parameters to avoid these structures were identified.

Testing Anti-Biofilm Polymeric Surfaces: Where to Start?

Present day awareness of biofilm colonization on polymeric surfaces has prompted the scientific community to develop an ever-increasing number of new materials with anti-biofilm features. However, compared to the large amount of work put into discovering potent biofilm inhibitors, only a small number of papers deal with their validation, a critical step in the translation of research into practical applications. This is due to the lack of standardized testing methods and/or of well-controlled in vivo studies that show biofilm prevention on polymeric surfaces; furthermore, there has been little correlation with the reduced incidence of material deterioration. Here an overview of the most common methods for studying biofilms and for testing the anti-biofilm properties of new surfaces is provided.

Raman Sensing and Its Multimodal Combination with Optoacoustics and OCT for Applications in the Life Sciences

Currently, many optical modalities are being investigated, applied, and further developed for non-invasive analysis and sensing in the life sciences. To befit the complexity of the study objects and questions in this field, the combination of two or more modalities is attempted. We review our work on multimodal sensing concepts for applications ranging from non-invasive quantification of biomolecules in the living organism to supporting medical diagnosis showing the combined capabilities of Raman spectroscopy, optical coherence tomography, and optoacoustics.

Heat and Bleach: A Cost-Efficient Method for Extracting Microplastics from Return Activated Sludge

The extraction of plastic microparticles, so-called microplastics, from sludge is a challenging task due to the complex, highly organic material often interspersed with other benign microparticles. The current procedures for microplastic extraction from sludge are time consuming and require expensive reagents for density separation as well as large volumes of oxidizing agents for organic removal, often resulting in tiny sample sizes and thus a disproportional risk of sample bias. In this work, we present an improved extraction method tested on return activated sludge (RAS). The treatment of 100 ml of RAS requires only 6% hydrogen peroxide (H₂O₂) for bleaching at 70 °C, followed by density separation with sodium nitrate/sodium thiosulfate (SNT) solution, and is completed within 24 h. Extracted particles of all sizes were chemically analyzed with confocal Raman microscopy. An extraction efficiency of 78 ± 8% for plastic particle sizes 20 µm and up was confirmed in a recovery experiment. However, glass shards with a diameter of less than 20 µm remained in the sample despite the density of glass exceeding the density of the separating SNT solution by 1.1 g/cm³. This indicates that density separation may be unreliable for particle sizes in the lower micrometer range.

The potential of lactic acid bacteria to colonize biotic and abiotic surfaces and the investigation of their interactions and mechanisms

Lactic acid bacteria (LAB) are a heterogeneous group of Gram-positive bacteria that comprise several species which have evolved in close association with humans (food and lifestyle). While their use to ferment food dates back to very ancient times, in the last decades, LAB have attracted much attention for their documented beneficial properties and for potential biomedical applications. Some LAB are commensal that colonize, stably or transiently, host mucosal surfaces, inlcuding the gut, where they may contribute to host health. In this review, we present and discuss the main factors enabling LAB adaptation to such lifestyle, including the gene reprogramming accompanying gut colonization, the specific bacterial components involved in adhesion and interaction with host, and how the gut niche has shaped the genome of intestine-adapted species. Moreover, the capacity of LAB to colonize abiotic surfaces by forming structured communities, i.e., biofilms, is briefly discussed, taking into account the main bacterial and environmental factors involved, particularly in relation to food-related environments. The vast spread of LAB surface-associated communities and the ability to control their occurrence hold great potentials for human health and food safety biotechnologies.