Effect of oxidation and catalytic reduction of trace organic contaminants on their activated carbon adsorption

Adsorption on activated carbon combined with ozonation for the removal of contaminants of emerging concern in drinking water

The presence of Contaminants of Emerging Concern (CECs) in drinking water is raising concern for potential negative effects on human health. Ozonation and adsorption on activated carbon are the most suitable processes for CECs removal in drinking water treatment plants (DWTPs). This study aims at evaluating the performance of ozonation and adsorption as in-series processes compared to those of the stand-alone processes, focusing on 18 compounds representative of various CECs families. No CECs spike was performed to evaluate the effectiveness of these processes towards CECs at their environmental concentrations. Adsorption isotherms were performed on water samples collected before and after the full-scale ozonation in a DWTP, testing different combinations of ozone and activated carbon doses. Generally, the combination of the two processes was beneficial (83% average removal) compared to adsorption and ozonation alone (71% and 34% average removal respectively). The effect of ozonation on adsorption depends on CECs reactivity with ozone, since ozonation improves the adsorption performance of poorly-oxidizable CECs, but worsens that of well-oxidizable compounds. The removal of organic matter, investigated by absorbance at 254 nm and fluorescence, by ozonation reduces competition for the subsequent CECs removal by adsorption (up to 20% increase of total CECs adsorption). Finally, the removal of both absorbance and fluorescence seems to be a good proxy variables for total CECs adsorption, with different relationships depending on the presence of ozonation. Conversely, it is not effective for ozonation, since the relationship depends on the reactivity of the specific CEC with ozone.

Interspecies Metabolic Interactions in a Synergistic Consortium Drive Efficient Degradation of the Herbicide Bromoxynil Octanoate

Microbial communities play vital roles in biogeochemical cycles, allowing biodegradation of a wide range of pollutants. Although many studies have shown the importance of interspecies interactions on activities of communities, fully elucidating the complex interactions in microbial communities is still challenging. Here, we isolated a consortium containing two bacterial strains (Acinetobacter sp. AG3 and Bacillus sp. R45), which could mineralize bromoxynil octanoate (BO) with higher efficiency than either strain individually. The BO degradation pathway by the synergistic consortium was elucidated, and interspecies interactions in the consortium were explored using genome-scale metabolic models (GSMMs). Modeling showed that growth and degradation enhancements were driven by metabolic interactions, such as syntrophic exchanges of small metabolites in the consortium. Besides, nutritional enhancers were predicted to improve BO degradation, which were tested experimentally. Overall, our results will enhance our understanding of microbial mineralization of BO by consortia and promote the application of microbial communities for bioremediation.

Cu-Catalyzed Hydrodehalogenation of Brominated Aromatic Pollutants in Aqueous Solution

The catalytic effect of copper in Devarda’s Al-Cu-Zn alloy (Dev. alloy) and sole metallic copper, copper salts and copper oxides in the coaction of NaBH4 within the hydrodehalogenation (HDH) of polybrominated phenols, such as the herbicide Bromoxynil in alkaline aqueous solution has been investigated. Namely, the hydrodebromination (HDB) activity of Dev. alloy/NaOH system has been compared to heterogeneous Cu-based catalysts using NaBH4 as a reductant. Differences in the solid-state structures of used Cu-based heterogeneous catalysts after the mentioned HDB process have been studied using the powder XRD and SEM techniques. It was found that some of the used copper-based catalysts are reusable and reasonably effective even at room temperature. Efficiency of the most promising copper-based reduction systems (Dev. alloy/NaOH and Cu-based catalysts/NaBH4) have been successfully tested within the HDB of industrially important brominated flame retardant tetrabromobisphenol A (TBBPA). Dev. alloy/NaOH and Cu-based catalyst generated in-situ within the CuSO4/NaBH4 produced were recognized as the most active HDB agents for complete debromination of both BRX and TBBPA.

Natural clay as a sorbent to remove pharmaceutical micropollutants from wastewater

Worldwide, the aquatic environment is contaminated by micro-pollutants, such as ingredients of personal care products, pesticides and pharmaceuticals. This contamination is one of the major environmental issues of global concern. Adsorption is one of approach, which has been most extensively discussed within recent years for the reduction of the input of micro-pollutants into the environment. In the present study, the natural clay classified as Na-montmorillonite, was characterized and tested for its potential to remove four model compounds representing different polarity and ionizability: i) diatrizoic acid (DAT), ii) iopamidol (IOP), iii) metformin (MTF), and iv) carbamazepine (CBZ). The adsorption efficiency of clay was evaluated by initial compound concentration, effect of pH, contact time and temperature. The results indicated that clay was able to remove the pharmaceuticals from aqueous medium with an efficiency of 70% for CBZ and MTF. In contrast, clay showed a lower removal of 30% for DAT and no removal for IOP. The results indicate that clay could rapidly and efficiently reduce the concentration of CBZ and MTF, which could provide a solution to remove some substances, without undesirable by-product generation. However, this study clearly demonstrated that removal rates strongly depend on the compound. Albeit chemical structure may play a role for the different degree of removal, this study could not completely explain the sorption mechanism between sorbent-sorbate interactions.

Enhanced treatment of secondary municipal wastewater effluent: comparing (biological) filtration and ozonation in view of micropollutant removal, unselective effluent toxicity, and the potential for real-time control

Ozonation and three (biological) filtration techniques (trickling filtration (TF), slow sand filtration (SSF) and biological activated carbon (BAC) filtration) have been evaluated in different combinations as tertiary treatment for municipal wastewater effluent. The removal of 18 multi-class pharmaceuticals, as model trace organic contaminants (TrOCs), has been studied. (Biological) activated carbon filtration could reduce the amount of TrOCs significantly (>99%) but is cost-intensive for full-scale applications. Filtration techniques mainly depending on biodegradation mechanisms (TF and SSF) are found to be inefficient for TrOCs removal as a stand alone technique. Ozonation resulted in 90% removal of the total amount of quantified TrOCs, but a post-ozonation step is needed to cope with an increased unselective toxicity. SSF following ozonation showed to be the only technique able to reduce the unselective toxicity to the same level as before ozonation. In view of process control, innovative correlation models developed for the monitoring and control of TrOC removal during ozonation, are verified for their applicability during ozonation in combination with TF, SSF or BAC. Particularly for the poorly ozone reactive TrOCs, statistically significant models were obtained that correlate TrOC removal and reduction in UVA₂₅₄ as an online measured surrogate parameter.