Ultrasonic spray pyrolysis synthesis of reduced graphene oxide/anatase TiO2 composite and its application in the photocatalytic degradation of methylene blue in water

Creating anti-viral high-touch surfaces using photocatalytic transparent films

Antimicrobial and self-cleaning surface coatings are promising tools to combat the growing global threat of infectious diseases and related healthcare-associated infections (HAIs). Although many engineered TiO₂-based coating technologies are reporting antibacterial performance, the antiviral performance of these coatings has not been explored. Furthermore, previous studies have underscored the importance of the "transparency" of the coating for surfaces such as the touch screens of medical devices. Hence, in this study, we fabricated a variety of nanoscale TiO₂-based transparent thin films (anatase TiO₂, anatase/rutile mixed phase TiO₂, silver-anatase TiO₂ composite, and carbon nanotube-anatase TiO₂ composite) via dipping and airbrush spray coating technologies and evaluated their antiviral performance (Bacteriophage MS2 as the model) under dark and illuminated conditions. The thin films showed high surface coverage (ranging from 40 to 85%), low surface roughness (maximum average roughness 70 nm), super-hydrophilicity (water contact angle 6-38.4°), and high transparency (70-80% transmittance under visible light). Antiviral performance of the coatings revealed that silver-anatase TiO₂ composite (nAg/nTiO₂) coated samples achieved the highest antiviral efficacy (5-6 log reduction) while the other TiO₂ coated samples showed fair antiviral results (1.5-3.5 log reduction) after 90 min LED irradiation at 365 nm. Those findings indicate that TiO₂-based composite coatings are effective in creating antiviral high-touch surfaces with the potential to control infectious diseases and HAIs.

Assessment of surface and electrical properties of the TiO2@zeolite hybrid materials

Degradation of pollutants in aqueous medium is of high interest due to the impact on environment and human health, therefore, design and study of the physico-chemical properties of photocatalysts for water remediation are of major significance. Among properties of photocatalyst, those related to the surface and electrical mechanism are crucial to the photocatalyst´s performance. Here we report the chemical and morphological characteristics of TiO₂@zeolite photocatalyst by X-ray photoelectron spectroscopy (XPS) and scanning electron microscopy (SEM) respectively, and a coherent electrical conduction mechanism was proposed based on data obtained from assisted laser impedance spectroscopy (ALIS), in which the zeolite was synthesized from recycled coal fly ash. The results obtained by SEM and XPS verified the presence of spherical particles of TiO₂ anatase with presence of Ti³⁺ state. ALIS results showed that impedance of the entire system increases when the amount of TiO₂ increases and the samples with lower capacitive performance allowed a larger transfer of the charges between the solid-liquid interface. All results showed that higher photocatalytic performance of TiO₂ growth over hydroxysodalite with 8.7 wt% and 25 wt% of TiO₂ can be explained in terms of the morphology of TiO₂ and the interactions between substrate-TiO₂ mainly.

Preparation of LDO@TiO2 core-shell nanosheets for enhanced photocatalytic degradation of organic pollution

TiO₂-based nanosheet materials with a core-shell structure are expected to be one of the promising photocatalysts for the degradation of organic pollution. It is a challenge to synthesize TiO₂ by the desired nucleation and growth process, so most reported TiO₂ core-shell photocatalysts are prepared using TiO₂ as a core material. Layered double hydroxides (LDHs) are considered ideal platforms to grow TiO₂in situ and further serve as additional components to improve the separation of photogenerated charge carriers. In this work, we report the design and fabrication of anatase TiO₂-coated ZnAl-layered double oxide (LDO@TiO₂) nanosheets, which involve the in situ growth of TiO₂ on ZnAl-LDH followed by subsequent calcination treatment. The resulting LDO@TiO₂ photocatalyst yields typical core-shell nanosheet morphology with a mesoporous structure, exhibiting excellent photodegradation and mineralization efficiency for organic pollution.

Effective Strategies, Mechanisms, and Photocatalytic Efficiency of Semiconductor Nanomaterials Incorporating rGO for Environmental Contaminant Degradation

The water pollution problems severely affect the natural water resources due to the large disposal of dyes, heavy metals, antibiotics, and pesticides. Advanced oxidation processes (AOP) have been developed using semiconductor nanomaterials as photocatalysts for water treatment as an essential strategy to minimize environmental pollution. Significant research efforts have been dedicated over the past few years to enhancing the photocatalytic efficiencies of semiconductor nanomaterials. Graphene-based composites created by integrating reduced graphene oxide (rGO) into various semiconductor nanomaterials enable the unique characteristics of graphene, such as the extended range of light absorption, the separation of charges, and the high capacity of adsorption of pollutants. Therefore, rGO-based composites improve the overall visible-light photocatalytic efficiency and lead to a new pathway for high-performance photocatalysts’ potential applications. This brief review illustrates the strategies of combining rGO with various semiconductor nanomaterials and focuses primarily on modification and efficiency towards environmental contaminants.

Preparation of sonoactivated TiO2-DVDMS nanocomposite for enhanced antibacterial activity

Titanium dioxide (TiO₂) nanoparticle has good photo-/sono-catalytic features, the reunion of this particle in solution-phase generally limits the extensive biomedical application. In the present study, the aggregation of TiO₂ nanoparticles was alleviated by facile fabrication under different pH conditions. A novel TiO₂ nanocomposite was further synthesized by properly conjugation with trace amount of DVDMS sensitizer (named DFT). The characterization, sonoactivity, as well as the antibacterial efficiency were specially evaluated. The results showed that the sonochemical activity of DFT was greatly improved as compared with the simple surface modification of TiO₂ (F-TiO₂) and free DVDMS, regarding to the hydroxyl radicals and singlet oxygen yields using the same ultrasound exposure. Moreover, ultrasonic stimulation of DFT exhibited excellent bacterial eradication, with up to 92.41% of killing efficiency in S. aureus. The flow cytometry analysis indicated an increased intracellular ROS and membrane disturbance by combination of DFT and ultrasound. The findings suggest that the proper fabrication and DVDMS incorporation greatly improved the sonocatalytic process of TiO₂, and the ultrasound based biomedical applications of DFT deserve future deep investigation.

Anti-algal activity of Fe2O3-TiO2 photocatalyst on Chlorella vulgaris species under visible light irradiation

Many industries located in coastal areas use a large amount of seawater. Algal biofouling can be a major problem that hinders the efficiency of these industrial facilities. In most cases, seawater requires algal removal pre-treatment to avoid or mitigate biofilm formation. To remediate green microalgae, Fe₂O₃-TiO₂ nanoparticles with 2.5% w/w Fe₂O₃ were applied as a visible light driven photocatalyst. The anti-algal activity of the photocatalytic pre-treatment using green microalgae, Chlorella vulgaris was tested. The experiments were carried out in freshwater, artificial seawater, and real seawater. Effect of photocatalyst dosage, visible light intensity, and water salinity on the removal of microalgae was investigated. The highest inactivation efficiency of Chlorella vulgaris was achieved under 55 W/m² visible light irradiation when 0.25 g/L of Fe₂O₃-TiO₂ photocatalyst was used. The photocatalytic removal kinetics of Chlorella vulgaris followed the pseudo first order Langmuir-Hinshelwood model. The results revealed that the efficiency of photocatalytic removal of algae decreased with increasing of seawater salinity. The anti-algal activity of Fe₂O₃-TiO₂ nanoparticles was attributed to the generation of reactive oxygen species (ROS) through the photocatalytic process. H⁺ radical was shown to be the most important ROS that nanoparticles produced in the aqueous media. Using Fe₂O₃-TiO₂ nanoparticles in photocatalytic pre-treatment could be an efficient environmental-friendly method for micro-algal remediation in seawater under visible light.

Enhanced photocatalytic CO2 reduction and 2,4-dichlorophenol degradation of TiO2 nanotubes via bi-directionally controlling electrons and holes

In this study, TiO₂ nanotubes (TiNTs) co-modified with MnO_x (Mn) and reduced-graphene-oxide (RGO) were prepared by a simple electrochemical deposition process. The photocatalytic activities for reducing CO₂ and degradating 2,4-dichlorophenol of TiNTs were enhanced after co-modification with proper amounts of MnO_x and RGO. The yields of acetic acid and formic acid of the amount-optimized TiNTs (6RGO/4Mn/TiNTs) were 36.3 ± 0.9 and 21.6 ± 0.7 mg L^-1 h^-1, which were ∼2.5 times and ∼2.2 times of bare TiNTs and the 2,4-dichlorophenol degradation efficiency of 6RGO/4Mn/TiNTs was 36.9% for 1 h, which was 21.3% higher than bare TiNTs. According to the results of photophysical and photochemical experiments, the enhanced photocatalytic activity was attributed to the greatly-elevated photogenerated charge separation via the bi-directional control mechanism of electrons and holes. The photogenerated holes could be captured by MnO_x and the transfer of photogenerated electrons could be accelerated through the RGO. In addition, the formed OH was found to act as major active species in the 2,4-dichlorophenol degradation process. The degradation paths by OH attacking was proposed by analyzing the main intermediates.

Rational design of a polypyrrole-based competent bifunctional magnetic nanocatalyst

The combination of conducting polymers with semiconductors for the fabrication of organic/inorganic hybrid nanocatalysts is one of the most promising research areas for many applications. In this work, the synthesized nanocomposite combines several advantages such as the photoresponse shift from the UV region toward visible light by narrowing the band gap of the semiconductor, magnetic separation ability and dual applications including the catalytic reduction of p-nitrophenol (PNP) and the photocatalytic degradation of methylene blue (MB) dye. In addition to the core magnetite nanoparticles (NPs), the synthesized nanocomposite contains polypyrrole (PPY) and TiO₂ shells that are decorated with silver metal NPs to prevent electron–hole recombination and to enhance the catalytic performance. Indeed, the catalytic PNP reduction experiments reveal that the synthesized nanocomposite exhibits significantly high catalytic activity with a rate constant of 0.1169 min⁻¹. Moreover, the photocatalytic experiments show that the synthesized nanophotocatalyst has a boosting effect toward MB dye degradation under normal daytime visible light irradiation with a rate constant of 6.38 × 10⁻² min⁻¹. The synergetic effect between silver NPs, PPY and TiO₂ is thought to play a fundamental role in enhancing the photocatalytic activity.

An efficient method to synthesize a magnetic nanocomposite with dual catalytic activities with a synergetic effect between Ag nanoparticles, polypyrrole and TiO₂ is described.