Anaerobic biodegradation of biofuels and their impact on the corrosion of a Cu-Ni alloy in marine environments

Bacterial community response to chronic heavy metal contamination in marine sediments of the East China Sea

Marine sediments act as a sink for various heavy metals, which may have profound impact on sedimentary microbiota. However, our knowledge about the collaborative response of bacterial community to chronic heavy metal contamination remains little. In this study, concentrations of seven heavy metals (As, Cd, Cr, Cu, Hg, Pb, and Zn) in sediments collected from the East China Sea were analyzed and Illumina Miseq 16 S rRNA sequencing was applied to characterize the structure of bacterial community. Microbiota inhabiting sediments in the East China Sea polluted with heavy metals showed different community composition from relatively pristine sites. The response of bacterial community to heavy metal stress was further interrogated with weighted correlation network analysis (WGCNA). WGCNA revealed ten bacterial modules exhibiting distinct co-occurrence patterns and among them, five modules were related to heavy metal pollution. Three of them were positively correlated with an increase in at least one heavy metal concentration, hubs (more influential bacterial taxa) of which were previously reported to be involved in the geochemical cycling of heavy metals or possess tolerance to heavy metals, while another two modules showed opposite patterns. Our research suggested that ecological functional transition might have occurred in East China Sea sediments by shifts of community composition with sensitive modules majorly involved in the meaningful global biogeochemical cycling of carbon, sulfur, and nitrogen replaced by more tolerant groups of bacteria due to long-term exposure to low-concentration heavy metals. Hubs may serve as indicators of perturbations of benthic bacterial community caused by heavy metal pollution and support monitoring remediation of polluted sites in marine environments.

Microbiologically Influenced Corrosion of Copper and Its Alloys in Anaerobic Aqueous Environments: A Review

Regardless of the long record of research works based on microbiologically influenced corrosion (MIC), its principle and mechanism, which lead to accelerated corrosion, is yet to be fully understood. MIC is observed on different metallic substrates and can be caused by a wide variety of microorganisms with sulfate-reducing bacteria (SRB) being considered the most prominent and economically destructive one. Copper and its alloys, despite being used as an antimicrobial agent, are recorded to be susceptible to microbial corrosion. This review offers a research overview on MIC of copper and its alloys in anaerobic aqueous environments. Proposed MIC mechanisms, recent work and developments as well as MIC inhibition techniques are presented focusing on potable water systems and marine environment. In the future research perspectives section, the importance and possible contribution of knowledge about intrinsic properties of substrate material are discussed with the intent to bridge the knowledge gap between microbiology and materials science related to MIC.

Multiscale characterization of seawater pipe erosion of B10 copper-nickel alloy welded joints

In seawater pipeline, the welding joint is a non-uniform structure composed of welding seam, base metal and heat affected zone. It has inhomogeneity in chemical composition, organizational structure, residual stress, etc. As local defects and high turbulence accelerate corrosion, the welding joint is often the weakest link in pipeline corrosion. Herein, the electrochemical corrosion behavior of B10 alloy welded joint in flowing seawater is studied from macroscopic and submicroscopic viewpoints using AC impedance, linear polarization, array electrode and morphological characterization. The results reveal that the corrosion rate of weld metal (WM), base metal (BM) and heat-affected zone (HAZ) decreased with the increase of time. Combined with SEM and EDS analysis, it can be seen that the increase in time led to the decomposition and accumulation of corrosion products, which gradually enhanced the corrosion resistance of welded joints. At the submicroscopic scale, WM acts as a cathode to mitigate corrosion during the later stages of high flow rate.

Microbial corrosion of metals: The corrosion microbiome

Microbially catalyzed corrosion of metals is a substantial economic concern. Aerobic microbes primarily enhance Fe⁰ oxidation through indirect mechanisms and their impact appears to be limited compared to anaerobic microbes. Several anaerobic mechanisms are known to accelerate Fe⁰ oxidation. Microbes can consume H₂ abiotically generated from the oxidation of Fe⁰. Microbial H₂ removal makes continued Fe⁰ oxidation more thermodynamically favorable. Extracellular hydrogenases further accelerate Fe⁰ oxidation. Organic electron shuttles such as flavins, phenazines, and possibly humic substances may replace H₂ as the electron carrier between Fe⁰ and cells. Direct Fe⁰-to-microbe electron transfer is also possible. Which of these anaerobic mechanisms predominates in model pure culture isolates is typically poorly documented because of a lack of functional genetic studies. Microbial mechanisms for Fe⁰ oxidation may also apply to some other metals. An ultimate goal of microbial metal corrosion research is to develop molecular tools to diagnose the occurrence, mechanisms, and rates of metal corrosion to guide the implementation of the most effective mitigation strategies. A systems biology approach that includes innovative isolation and characterization methods, as well as functional genomic investigations, will be required in order to identify the diagnostic features to be gleaned from meta-omic analysis of corroding materials. A better understanding of microbial metal corrosion mechanisms is expected to lead to new corrosion mitigation strategies. The understanding of the corrosion microbiome is clearly in its infancy, but interdisciplinary electrochemical, microbiological, and molecular tools are available to make rapid progress in this field.

Community succession in an anaerobic long-chain paraffin-degrading consortium and impact on chemical and electrical microbially influenced iron corrosion

Community compositional changes and the corrosion of carbon steel in the presence of different electron donor and acceptor combinations were examined with a methanogenic consortium enriched for its ability to mineralize paraffins. Despite cultivation in the absence of sulfate, metagenomic analysis revealed the persistence of several sulfate-reducing bacterial taxa. Upon sulfate amendment, the consortium was able to couple C28H58 biodegradation with sulfate reduction. Comparative analysis suggested that Desulforhabdus and/or Desulfovibrio likely supplanted methanogens as syntrophic partners needed for C28H58 mineralization. Further enrichment in the absence of a paraffin revealed that the consortium could also utilize carbon steel as a source of electrons. The severity of both general and localized corrosion increased in the presence of sulfate, regardless of the electron donor utilized. With carbon steel as an electron donor, Desulfobulbus dominated in the consortium and electrons from iron accounted for ∼92% of that required for sulfate reduction. An isolated Desulfovibrio spp. was able to extract electrons from iron and accelerate corrosion. Thus, hydrogenotrophic partner microorganisms required for syntrophic paraffin metabolism can be readily substituted depending on the availability of an external electron acceptor and a single paraffin-degrading consortium harbored microbes capable of both chemical and electrical microbially influenced iron corrosion.

Surface Characterization and Corrosion Behavior of 90/10 Copper-Nickel Alloy in Marine Environment

Surface characterization and corrosion behavior of 90/10 copper-nickel alloy in seawater from Xiamen bay at 30 °C for 56 days were investigated in this study. The results indicated that the corrosion product layer was mainly a mixture of CuO, Cu₂O, and Cu(OH)₂, with a transition to CuCl, CuCl₂, and Cu₂(OH)₃Cl during the corrosion process. However, as corrosion proceeds, the resistance of the product film was reduced due to its heterogeneous and fairly porous structures, which led to local corrosion of the alloy. The corrosion potentials (E_corr) increase while corrosion current densities (I_corr) decrease with time because of the formation of protective oxide film.