One-pot synthesis of layered double hydroxide hollow nanospheres with ultrafast removal efficiency for heavy metal ions and organic contaminants

Electrospun Materials Based on Polymer and Biopolymer Blends-A Review

This review covers recent developments and progress in polymer and biopolymer blending and material preparation by electrospinning. Electrospinning is a technique that is used to produce nanofibers to improve the quality of membranes. Electrospun nanofibers are highly applicable in biomedical sciences, supercapacitors, and in water treatment following metal ion adsorption. The key affecting factors of electrospinning have been checked in the literature to obtain optimal conditions of the electrospinning process. Future research directions and outlooks have been suggested to think about innovative ideas for research in this field.

Magnetic Iron Oxide Nanoneedles with Hierarchical Structure for Controllable Catalytic Activity of 4-Nitrophenol Reduction

Catalyst systems with high catalytic activity and sustainability are highly desirable. Here, we report a design for catalytic composites with a hierarchical structure in which polydopamine (PD), multi-metallic nanocatalysts and iron oxide nanoneedles are successively deposited on a magnetic core. PD layers with various thicknesses are coated onto the magnetic core and serve as a template by which to take up multi-metallic nanocatalysts such as Au, Ag and Pt nanoparticles. The iron oxide nanoneedles act as spacers, preventing the nanocomposite from aggregating and increasing the surface area of the composite. The distinctive structures of the controllable template, the multi-metallic catalysts and needle-like layers enable the rapid migration of reactive ionic species and enhance catalytic ability via the synergistic effect of the multi-metallic nanocatalysts and iron oxide nanoneedles. Moreover, due to the strong magnetic property of the catalytic nanocomposites, they can be easily recovered with an external magnet and reused. Our hierarchical nanocomposites for recyclable nanocatalysts provide a new design concept for highly efficient catalysts.

A novel biosorbent functionalized pillar[5]arene: Synthesis, characterization and effective biosorption of Cr(VI)

Among toxic chemicals, hexavalent chromium (Cr(VI)) is one of the most carcinogenic and toxic pollutants that hostiles to the health of both humans and other living things. Therefore, the removal of Cr(VI) is of great importance to keep our environment clean and tidy. In this study, an easy-make, inexpensive, and natural biosorbent material (Sp-P[5]) was prepared to preserve our environment using a pillar[5]arene based-on sporopollenin microcapsule. The prepared biosorbent was successfully characterized by some techniques such as FTIR, XRD, and SEM. The biosorbent, Sp-P[5], exhibited an open mesoporous structure richly decorated with multi-amine-containing moieties resulting in enhanced Cr(VI) sorption. The sorption behavior of Cr(VI) ions is satisfactorily adapted from the sorption kinetics pseudo-second-order law and the isotherm models to the Langmuir model at different temperatures. The Langmuir model fits at different temperatures (298-328 K) and the maximum sorption capacities of the Cr(VI) ion ranged from 106.38 to 117.26 mg/g. The thermodynamic calculations reveal that the sorption of Cr(VI) ions on the Sp-P[5] is entropy-driven, endothermic, and spontaneous. The prepared biosorbent was also applied to the natural wastewater samples and different ions (chromate and dichromate). The sorption and desorption experiments showed that the sorption efficiency for Cr(VI) ions of the Sp-P[5] decreased to 70.88 % after 8 cycles. As result, the synthesized biosorbent, Sp-P[5], has outstanding potential in the removal of Cr(VI) ions from water bodies and natural wastewater systems.

High Selectivity and Stability Structure of Layered Double Hydroxide-Biochar for Removal Cd(II)

Composite M2+/Al-BC (Ca/Al-BC, Cu/Al-BC, and Ni/Al-BC) have been successfully synthesized. Composite and pristine materials were used as adsorbents of cadmium(II) [Cd(II)] in an aqueous solution. Firstly the performance of composite and pristine materials was evaluated by reusability properties until five cycles adsorption process followed with a determination of isotherms and adsorption thermodynamic properties. The results show composite has ten-fold surface area properties than starting materials. The adsorption capacities of CaAl-BC, CuAl-BC, and NiAl-BC at a temperature of 333 K were 156.250 mg/g, 149.254 mg/g, and 208.333 mg/g, respectively. Copyright © 2022 by Authors, Published by BCREC Group. This is an open access article under the CC BY-SA License (https://creativecommons.org/licenses/by-sa/4.0). 

High-Density Gold Nanoparticles Implanted on Mg/Fe LDH Nanoflowers Assisted Lateral Flow Immuno-Dipstick Assay for Visual Detection of Human Epididymal Protein 4

The timelier and more accurate the diagnosis of the disease, the higher the patient’s survival rate. Human epididymal protein 4 (HE4) has great significance as a biomarker of concern for reflecting ovarian cancer. Herein, we prepared a novel optical label that can be used in lateral-flow immuno-dipstick assay (LFIA) for sensitive visual detection of HE4 by implanting hydrophobic gold nanoparticles (Au NPs) at high density in Mg/Fe LDH nanoflowers (MF NFs). MF NFs with large specific surface area, high porosity, abundant active binding sites, and stable structure were employed for the first time as templates to directly anchor Au NPs in the organic phase. After simple modification with an optimized amount of branched polyethyleneimine, not only could MF@Au NFs be dispersed in the aqueous phase, but also amino functional groups were introduced on its surface to facilitate subsequent antibody coupling steps. The limit of detection reaches 50 pM with a detection range of 50 to 1000 pM. This work initially explored how MF NFs can be used to load signal labels with ideal stability and signal amplification capabilities, which greatly improves the practicability of LFIA and highlights its important role in the field of rapid diagnostics.

Enhancing mechanism of arsenic(iii) adsorption by MnO2-loaded calcined MgFe layered double hydroxide

The use of MnO2/MgFe-layered double hydroxide (MnO2/MgFe-LDH) and MnO2/MgFe-layered double oxide (MnO2/MgFe-LDO400 °C) for arsenic immobilization from the aqueous medium is the subject of this research. Fourier transform infrared spectroscopy, X-ray diffraction, X-ray photoelectron spectroscopy, scanning electron microscopy, and transmission electron microscopy were used to characterise MnO2/MgFe-LDH and MnO2/MgFe-LDO400 °C. Based on our developed method, MnO2 was spread on the clay composites' surfaces in the form of a chemical bond. The clay composite exhibited a good adsorption effect on arsenic. The experimental findings fit the pseudo-second-order model well, indicating that the chemisorption mechanism played a significant role in the adsorption process. Furthermore, the Freundlich model suited the adsorption isotherm data of all adsorbents well. The recycling experiment showed that MnO2/MgFe-LDH and MnO2/MgFe-LDO400 °C exhibited good stability and reusability. In summary, MnO2/MgFe-LDH and MnO2/MgFe-LDO400 °C are promising for developing processes for efficient control of the pollutant arsenic.

Adsorptive removal of heavy metal anions from water by layered double hydroxide: A review

High-valence heavy metals with high ecotoxicity are generally found in water in the form of anions, and this increases heavy metal pollution intensity and treatment difficulty. Recent studies have pointed to the potential efficiency of layered double hydroxides (LDHs) to meet this challenge. In this review, we retrospectively research the development of LDHs using a Java application called CiteSpace. We describe the unique layer structure, highly adjustable chemical properties, and diverse synthesis methods of LDHs, all of which decide the effective adsorption of heavy metal anions by LDHs. Subsequently, we focus on discussing the adsorption mechanism of LDHs on heavy metal anions, as well as the current state of research and future directions for microscopic interaction mechanisms. For practical applications, it is critical to improve the adsorption selectivity and stability. We then recommend solutions to improve the adsorption selectivity and stability after identifying the influencing mechanism. Finally, we provide our perspectives on the future development of LDHs adsorption of heavy metal anions.

Recent Advances in Adsorptive Nanocomposite Membranes for Heavy Metals Ion Removal from Contaminated Water: A Comprehensive Review

Water contamination is one of the most urgent concerns confronting the world today. Heavy metal poisoning of aquatic systems has piqued the interest of various researchers due to the high toxicity and carcinogenic consequences it has on living organisms. Due to their exceptional attributes such as strong reactivity, huge surface area, and outstanding mechanical properties, nanomaterials are being produced and employed in water treatment. In this review, recent advances in the use of nanomaterials in nanoadsorptive membrane systems for wastewater treatment and heavy metal removal are extensively discussed. These materials include carbon-based nanostructures, metal nanoparticles, metal oxide nanoparticles, nanocomposites, and layered double hydroxide-based compounds. Furthermore, the relevant properties of the nanostructures and the implications on their performance for water treatment and contamination removal are highlighted. The hydrophilicity, pore size, skin thickness, porosity, and surface roughness of these nanostructures can help the water permeability of the nanoadsorptive membrane. Other properties such as surface charge modification and mechanical strength can improve the metal adsorption effectiveness of nanoadsorptive membranes during wastewater treatment. Various nanocomposite membrane fabrication techniques are also reviewed. This study is important because it gives important information on the roles of nanomaterials and nanostructures in heavy metal removal and wastewater treatment.

APTMS-BCAD modified magnetic iron oxide for magnetic solid-phase extraction of Cu(II) from aqueous solutions

Fe₃O₄@SiO₂-3-aminopropyltrimethoxysilane-1,8-bis (3-chloropropoxy) anthracene-9,10-dione was synthesized as a new, sustainable, and environmentally friendly adsorbent for magnetic solid-phase extraction of Cu(II) from aqueous solutions. The structure of the adsorbent was characterized by FTIR, XRD, SEM, EDX, and TEM analysis. Optimum conditions for Cu(II) adsorption were determined as adsorbent dose 0.04 g, pH 5.0, contact time 120 min, and beginning concentration of 30 mg/L in the adsorption process. The adsorption capacity for Cu(II) ions was 43.67 mg/g and the removal efficiency was 84.72 percent. The Langmuir isotherm and the pseudo-second-order model fit the experimental data better. Adsorption was a spontaneous and endothermic process based on the obtained thermodynamic properties such as ΔG°, ΔH°, and ΔS°. The results showed that the sorbent has good selectivity in the presence of competing ions. The method was determined to be accurate and effective using real water samples and CRM.

•

Magnetic Fe₃O₄@SiO₂-3-aminopropyl-trimethoxysilane-1,8-bis(3-chloropro-poxy) anthracene-9,10-dione was synthesized as a new, sustainable, and environmentally friendly adsorbent for magnetic solid-phase extraction of Cu(II) from aqueous solutions.

•

The results showed that the presence of competitor ions did not have a significant effect on the sorption of Cu(II) ion and the sorbent had good selectivity.

•

Using real water samples and CRM, the method was found to be accurate and effective.

Nanostructured Materials for Water Purification: Adsorption of Heavy Metal Ions and Organic Dyes

Chemical water pollution poses a threat to human beings and ecological systems. The purification of water to remove toxic organic and inorganic pollutants is essential for a safe society and a clean environment. Adsorption-based water treatment is considered one of the most effective and economic technologies designed to remove toxic substances. In this article, we review the recent progress in the field of nanostructured materials used for water purification, particularly those used for the adsorption of heavy metal ions and organic dyes. This review includes a range of nanostructured materials such as metal-based nanoparticles, polymer-based nanomaterials, carbon nanomaterials, bio-mass materials, and other types of nanostructured materials. Finally, the current challenges in the fields of adsorption of toxic materials using nanostructured materials are briefly discussed.

Single-step removal of arsenite ions from water through oxidation-coupled adsorption using Mn/Mg/Fe layered double hydroxide as catalyst and adsorbent

This study developed a layered double hydroxides (Mn/Mg/Fe-LDH) material through a simple co-precipitation method. The Mn/Mg/Fe-LDH oxidized arsenite [As(III)] ions into arsenate [As(V)] anions. The As(III) and oxidized As(V) were then adsorbed onto Mn/Mg/Fe-LDH. The adsorption process of arseniate [As(V)] oxyanions by Mn/Mg/Fe-LDH was simultaneously conducted for comparison. Characterization results indicated that (i) the best Mg/Mn/Fe molar ratio was 1/1/1, (ii) Mn/Mg/Fe-LDH structure was similar to that of hydrotalcite, (iii) Mn/Mg/Fe-LDH possessed a positively charged surface (pH_IEP of 10.15) and low Brunauer-Emmett-Teller surface area (S_BET = 75.2 m²/g), and (iv) Fe²⁺/Fe³⁺ and Mn²⁺/Mn³⁺/Mn⁴⁺ coexisted in Mn/Mg/Fe-LDH. The As(III) adsorption process by Mn/Mg/Fe-LDH was similar to that of As(V) under different experimental conditions (initial solutions pH, coexisting foreign anions, contact times, initial As concentrations, temperatures, and desorbing agents). The Langmuir maximum adsorption capacity of Mn/Mg/Fe-LDH to As(III) (56.1 mg/g) was higher than that of As(V) (32.2 mg/g) at pH 7.0 and 25 °C. X-ray photoelectron spectroscopy was applied to identify the oxidation states of As in laden Mn/Mg/Fe-LDH. The key removal mechanism of As(III) by Mn/Mg/Fe-LDH was oxidation-coupled adsorption, and that of As(V) was reduction-coupled adsorption. The As(V) mechanism adsorption mainly involved: (1) the inner-sphere and outer-sphere complexation with OH groups of Mn/Mg/Fe-LDH and (2) anion exchange with host anions (NO₃^-) in its interlayer. The primary mechanism adsorption of As(III) was the inner-sphere complexation. The redox reactions made Mn/Mg/Fe-LDH lose its original layer structure after adsorbing As(V) or As(III). The adsorption process was highly irreversible. Mn/Mg/Fe-LDH can decontaminate As from real groundwater samples from 45-92 ppb to 0.35-7.9 ppb (using 1.0 g/L). Therefore, Mn/Mg/Fe-LDH has great potential as a material for removing As.

Multifunctional capacity of CoMnFe-LDH/LDO activated peroxymonosulfate for p-arsanilic acid removal and inorganic arsenic immobilization: Performance and surface-bound radical mechanism

Organoarsenic contaminants existing in water body threat human health and ecological environment due to insufficient bifunctional treatment technologies for organoarsenic degradation and inorganic arsenic immobilization. In order to safely and efficiently treat organoarsenic contaminants discharged into the aquatic environment, Co-Mn-Fe layered double hydroxide (CoMnFe-LDH) and Co-Mn-Fe layered double oxide (CoMnFe-LDO) were fabricated and employed as peroxymonosulfate (PMS) activator for organoarsenic degradation and inorganic arsenic immobilization, and p-arsanilic acid (p-ASA) was selected as target pollutant. Results demonstrated that the satisfactory removal of p-ASA (100.0%) in both CoMnFe-LDH/PMS and CoMnFe-LDO/PMS systems was obtained within 30 min, and substantial inorganic arsenic adsorption could be achieved (below 0.5 mg/L) in two systems with converting major inorganic arsenic species to arsenate. As XPS, ESR and quenching experiment revealed, the existence and generation of surface-bound radicals in two systems were identified. Based on density functional theory calculation and XPS analysis, the catalytic mechanism of CoMnFe-LDO/PMS system that PMS could be activated via direct electron transfer from adsorbed p-ASA was clarified, which differed from PMS activation via coupling with surface hydroxyl groups in CoMnFe-LDH/PMS system. Catalytic performance assessment under various critical operation parameters indicated that CoMnFe-LDH presented more stable ability of p-ASA removal in a wide pH range and complex aquatic environment. The recycle experiment demonstrated the excellent stability and reusability of CoMnFe-LDH(LDO). Besides, seven degradation products of p-ASA in CoMnFe-LDH/PMS system including phenolic compounds, azophenylarsonic acid, nitrobenzene and benzoquinne were identified by UV-Vis spectra and LC-TOF-MS analysis, and the corresponding degradation pathway was proposed. In summary, compared to CoMnFe-LDO/PMS, CoMnFe-LDH/PMS holds great promise for the development of an oxidation-adsorption process for efficient control of organoarsenic pollutant.

Synthesis and characterization of defective UiO-66 for efficient co-immobilization of arsenate and fluoride from single/binary solutions

Here, we aimed to synthesize UiO-66 architected fumaric acid mediated lanthanum (La-fum), zirconium (Zr-fum), and cerium (Ce-fum) metal-organic frameworks (MOFs) for co-immobilizations of both arsenate and fluoride from both single and binary systems. The crystalline behavior of Zr-fum MOF was the lowest compared to the other two forms, due to the fact that it required a modulator support as the nucleus growth nature of zirconium moiety is different. The Langmuir maximum adsorption densities of arsenate (fluoride) were 2.689 (4.240), 1.666 (2.255), and 2.174 (4.155) mmol/g for La-fum, Zr-fum, and Ce-fum, respectively and these adsorption densities were found to have record-high values compared with the existing materials in the literature. The arsenate and fluoride adsorption on the MOF materials were confirmed by XPS, PXRD and FTIR studies. The arsenate adsorption mechanism on La-fum and Ce-fum through monodentate complexation confirmed using the distinguished K-edge shell distance in EXAFS studies. The arsenate and fluoride-sorbed materials were recycled using 0.01 M HNO₃ and were further utilized for six consecutive cycles for both arsenate and fluoride adsorption indicated the feasibility of the materials. This kind of facile and easy solvothermal synthesized MOFs could pave a way towards the removal of toxins in a practical wastewater as these have superior adsorption properties, stability and reusability.

Fe3O4-FeMoS4: Promise magnetite LDH-based adsorbent for simultaneous removal of Pb (II), Cd (II), and Cu (II) heavy metal ions

There have always been numerous challenges to designing a cost-effectiveness, reusable and robust adsorbents for simultaneous heavy metal ion remediations from wastewaters. Herein, a novel kind of nanocomposite relying on the synergic impact of magnetic Fe₃O₄, FeMoS₄^-2, and magnesium-aluminum layered double hydroxide (MgAl-LDH) using loading the FeMoS₄^-2 on protonated Fe₃O₄ and adhered to the surface of Mg/Al-LDH (Fe₃O₄/FeMoS₄/MgAl-LDH). The nanocage structures adsorbent was characterized via FT-IR, XRD, FE-SEM, EDX, and VSM techniques and demonstrated having an efficient adsorption capability to common cationic pollutants (Pb (II), Cd (II) and Cu (II) by batch experiments. Disparate chief parameters affecting adsorption performance, including Fe₃O₄/FeMoS₄/MgAl-LDH mass, metal ion concentrations, solution pH, and contact time were considered and optimized through central composite design (CCD) in detail. Its supreme adsorption efficiency toward Pb (II), Cd (II), and Cu (II) accounted for 190.75, 140.50, and 110.25 mg g^-1, respectively, which acquired by the Langmuir model under the parameter set at 60 min contact time, solution pH at 5, 0.03 g the Fe₃O₄/FeMoS₄/MgAl-LDH and metal ion concentrations ranging from 10 to 300 mg L^-1. Such enhancement stemmed from the coordinated complexes in the LDH interlayer region and electrostatic attraction between Fe₃O₄/FeMoS₄/MgAl-LDH and metal ions. Furthermore, the adsorption conducts were more consistent with the pseudo-second-order model and the Langmuir isotherm model, respectively. Likewise, the features such as the superior regeneration and reusability allow the Fe₃O₄/FeMoS₄/MgAl-LDH nanocomposite to constitute as one of the promising materials for heavy metals remediation in wastewater.

Protonation stabilized high As/F mobility red mud for Pb/As polluted soil remediation

The hazardous red mud (RM) with high As/F mobility and heavy metal contaminated soil have constituted severe environmental threats. This work demonstrates a "waste to eco-material" strategy through a reliable and low-cost protonation approach to eliminate the As/F leaching risk of RM, and then recycle it as heavy metal passivators for Pb/As polluted soil remediation. The As/F anions have been immobilized by the protonated Fe/Al (hydr)oxides within RM via the formation of stable As/F compounds during the protonation process, which satisfies the requirement by the World Health Organization (As leaching <0.01 mg/L; F leaching <0.8 mg/L). Moreover, in the oilseed rape pot experiments, by adding 30 g/kg stabilized RM into Pb/As polluted soils (100 ~ 300 ppm), benefited from its large adsorption capacity, approximately 40.9 ~ 49.7% Pb and 40.8 ~ 54.8% As concentrations in the plant are reduced without adverse effects. The whole process for RM treatment and soil remediation is cost-effective, straightforward and eco-friendly without secondary pollution or soil degradation. This research provides a green chemical strategy to address both RM recycling and heavy metal contaminated soil remediation problems, which shows high economic feasibility and ecological benefits.

The interactions and adsorption mechanisms of ternary heavy metals on boron nitride

In this work, the interactions and adsorption mechanisms of Cu²⁺, Cd²⁺, and Ni²⁺ on boron nitride (BN) were tested by the simultaneous removal of metal ions from synthetic wastewater. BN was characterized using XRD, SEM, and FTIR spectroscopy. The adsorption differences between BN and the metal ions were explored through comparative studies in a single and ternary system. In the ternary system, adsorption occurs rapidly in the first 2 min for the metal ions, and the affinity order follows Cu²⁺>Cd²⁺>Ni²⁺. However, adsorption behavior changes due to the interaction between metal ions in the ternary system. Cu²⁺ showed an antagonistic effect on the adsorption of Cd²⁺ and Ni²⁺, while Cd²⁺ and Ni²⁺ produced a synergistic effect on Cu²⁺. In addition, the effect of metal ion concentration on the interaction between ions was studied based on a surface response experiment. An increase in Ni²⁺ or Cd²⁺ concentrations plays a synergistic effect on the adsorption of Cu²⁺, while an antagonistic adsorption for Ni²⁺ occurred with increasing Cu²⁺ or Cd²⁺ concentrations. We also discussed the various adsorption mechanisms as complexation, ion exchange, and electrostatic adsorption based on XPS analysis.

Adsorption mechanism of hexavalent chromium onto layered double hydroxides-based adsorbents: A systematic in-depth review

An attempt has been made in this review to provide some insights into the possible adsorption mechanisms of hexavalent chromium onto layered double hydroxides-based adsorbents by critically examining the past and present literature. Layered double hydroxides (LDH) nanomaterials are typical dual-electronic adsorbents because they exhibit positively charged external surfaces and abundant interlayer anions. A high positive zeta potential value indicates that LDH has a high affinity to Cr(VI) anions in solution through electrostatic attraction. The host interlayer anions (i.e., Cl^-, NO₃^-, SO₄^2-, and CO₃^2-) provide a high anion exchange capacity (53-520 meq/100 g) which is expected to have an excellent exchangeable capacity to Cr(VI) oxyanions in water. Regarding the adsorption-coupled reduction mechanism, when Cr(VI) anions make contact with the electron-donor groups in the LDH, they are partly reduced to Cr(III) cations. The reduced Cr(III) cations are then adsorbed by LDH via numerous interactions, such as isomorphic substitution and complexation. Nonetheless, the adsorption-coupled reduction mechanism is greatly dependent on: (1) the nature of divalent and trivalent salts utilized in LDH preparation, and the types of interlayer anions (i.e., guest intercalated organic anions), and (3) the adsorption experiment conditions. The low Brunauer-Emmett-Teller specific surface area of LDH (1.80-179 m²/g) suggests that pore filling played an insignificant role in Cr(VI) adsorption. The Langmuir maximum adsorption capacity of LDH (Q^o_max) toward Cr(VI) was significantly affected by the natures of used inorganic salts and synthetic methods of LDH. The Q^o_max values range from 16.3 mg/g to 726 mg/g. Almost all adsorption processes of Cr(VI) by LDH-based adsorbent occur spontaneously (ΔG° <0) and endothermically (ΔH° >0) and increase the randomness (ΔS° >0) in the system. Thus, LDH has much potential as a promising material that can effectively remove anion pollutants, especially Cr(VI) anions in industrial wastewater.

Effect of anion co-existence on ionic organic pollutants removal over Ca based layered double hydroxide

The effects of co-existing anions (NO₃^- or SO₄^2-) on the removal of sodium dodecylsulfate (SDS), representing anionic organic pollutants, by Ca-based layered double hydroxide (CaAl-LDH-Cl) are investigated to provide fundamental insights on the ionic surfactant removal in the presence of co-existing anions, and facilitate the establishment of a practical and advanced water treatment for environmental remediation. The SO₄^2- system shows higher adsorption capacity (4.43 mmol·g^-1) and larger d-spacing of adsorption resultant (3.4 nm) than the control system with no co-existing anion (3.64 mmol·g^-1, 3.25 nm) and the NO₃^- system (3.82 mmol·g^-1, 3.27 nm). The macroscopic and microscopic analyses reveal that, NO₃^- had a little influence on the SDS removal due to strong electrolysis, while SO₄^2- could significantly promote the SDS removal. Moreover, the reaction mechanism varies under different molar ratios of DS^-/SO₄^2-.