The adsorption of Cs+ from wastewater using lithium-modified montmorillonite caged in calcium alginate beads

Cesium adsorption from an aqueous medium for environmental remediation: A comprehensive analysis of adsorbents, sources, factors, models, challenges, and opportunities

Considering the widespread and indispensable nature of nuclear energy for future power generation, there is a concurrent increase in the discharge of radioactive Cs into water streams. Recent studies have demonstrated that adsorption is crucial in removing Cs from wastewater for environmental remediation. However, the existing literature lacks comprehensive studies on various adsorption methods, the capacities or efficiencies of adsorbents, influencing factors, isotherm and kinetic models of the Cs adsorption process. A bibliometric and comprehensive analysis was conducted using 1179 publications from the Web of Science Core Collection spanning from 2014 to 2023. It reviews and summarizes current publication trends, active countries, adsorption methods, adsorption capacities or efficiencies of adsorbents, tested water sources, influencing factors, isotherm, and kinetic models of Cs adsorption. The selection of suitable adsorbents and operating parameters is identified as a crucial factor. Over the past decade, due to their notable capacity for Cs adsorption, considerable research has focused on novel adsorbents, such as Prussian blue, graphene oxide, hydrogel, and nanoadsorbents (NA). However, there remains a need for further development of application-oriented laboratory-scale experiments. Future research directions should encompass exploring adsorption mechanisms, developing new adsorbents or their combinations, practical applications of lab-scale studies, and recycling radioactive Cs from wastewater. Drawing upon this literature review, we present the most recent research patterns concerning adsorbents to remove Cs, outline potential avenues for future research, and delineate the obstacles hindering effective adsorption. This comprehensive bibliometric review provides valuable insights into prevalent research focal points and emerging trends, serving as a helpful resource for researchers and policymakers seeking to understand the dynamics of adsorbents for Cs removal from water.

Recent advances in alginate-based composite gel spheres for removal of heavy metals

The discharge of heavy metal ions from industrial wastewater into natural water bodies is a consequence of global industrialisation. Due to their high toxicity and resistance to degradation, these heavy metal ions pose a substantial threat to human health as they accumulate and amplify. Alginate-based composite gels exhibit good adsorption and mechanical properties, excellent biodegradability, and non-toxicity, making them environmentally friendly heavy metal ion adsorbents for water with promising development prospects. This paper introduces the basic properties, cross-linking methods, synthetic approaches, modification methods, and manufacturing techniques of alginate-based composite gels. The adsorption properties and mechanical strength of these gels can be enhanced through surface modification, multi-component mixing, and embedding. The main production processes involved are sol-gel and cross-linking methods. Additionally, this paper reviews various applications of alginate composite gels for common heavy metals, rare earth elements, and radionuclides and elucidates the adsorption mechanism of alginate composite gels. This study aimed to provide a reference for synthesising new, efficient, and environmentally friendly alginate-based adsorbents and to contribute new ideas and directions for addressing the issue of heavy metal pollution.

Research on the remediation of cesium pollution by adsorption: Insights from bibliometric analysis

While nuclear energy with zero carbon emissions will continue to occupy an indispensable position in future scenarios for power generation, the proper disposal of nuclear waste is still highly challenging in many countries. Adsorption is currently one of the primary methods used for removal of cesium from wastewater. However, no available literature has systematically summarized advances and outlooks on the adsorptive removal of cesium, and research issues such as relevant adsorption mechanisms remain largely unexplored. In this study, a bibliometric analysis was used to quantitatively analyze 10141 publications in the Web of Science Core Collection that were published from 1900 to 2022. Current publication trends and active countries, most influential authors and institutions, journal distribution, and research hotspots and trends were reviewed and summarized. The results for the conceptual structure and evolution of investigations in this field showed three distinct periods of rapid development in recent decades. The first period concerned the scope, degree, and influences of pollution by cesium and the development of natural adsorbents. The second period included the exploration and verification of adsorption mechanisms, the fabrication and optimization of new materials, and the application of density functional theory for chemical calculations. The third period involved the development of more advanced biodegradable, nanoscale and synthetic materials with great potential for use as adsorbents as well as advances in engineering applications. Notably, the study showed that it is necessary to further enhance application-driven laboratory investigations. Future directions for research were proposed, such as the investigation of complex adsorption mechanisms, development of new materials, and engineering applications of materials developed in the laboratory. The findings will provide valuable insights and serve as a reference for researchers and policymakers as they address the adsorptive remediation of cases of pollution by cesium.

Wastewater Treatment and Biomedical Applications of Montmorillonite Based Nanocomposites: A Review

Background::

Rapid industrialisation, population growth and technological race worldwide have brought adverse consequences on water resources and as a result affect human health. Toxic metal ions, non-biodegradable dyes, organic pollutants, pesticides, pharmaceuticals are among the chief hazardous materials released into the water bodies from various sources. These hazardous contaminants drastically affect the flora and fauna globally leading to health deterioration there by giving rise to new biomedical challenges.

Hypothesis::

Montmorillonite based nanocomposites (MMTCs) have drawn an attention of the researchers to design environmental friendly, advanced and hygienic nanocomposites for wastewater treatment and biomedical purposes. Montmorillonite clay possesses peculiar physical and chemical properties that include enhanced surface reactivity, improved rheological performance, exorbitant miscibility in water due to which it shows highly favourable interactions with polymers, drugs, metals, mixed metals and metal oxides leading to the fabrication of different types of advanced montmorillonite based nanocomposites that have remarkable applications

Methodology::

Here we review the structural characteristics of montmorillonite clay, advances in the synthetic techniques involved in the fabrication of montmorillonite nanocomposites, their applications in waste water treatment and in bio medical field. The recently developed montmorillonite nanocomposites for (1) waste water treatment as nano-adsorbents for the elimination of toxic inorganic species such as metal ions and heterogeneous photo-catalysts for photo degradation of dyes, pesticides and pharmaceuticals (2) biomedical utilization viz drug delivery, wound amelioration, bone cement, tissue engineering etc. are presented

Conclusion::

The review exclusively focuses on recent research on montmorillonite based nanocomposites and their application in wastewater treatment and in biomedical field

Non-thermal plasma irradiated polyaluminum chloride for the heterogeneous adsorption enhancement of Cs+ and Sr2+ in a binary system

The natural ecosystem will continually deteriorate for decades by the leakage of Cs and Sr isotopes. The exploration of the new materials or techniques for the efficient treatment of radioactive wastewater is critically important. In this study, a dielectric barrier discharge (DBD) configuration was constructed to operate the non-thermal plasma (NTP). The NTP was incorporated into the synthesis of polyaluminum chloride (PAC) in two different procedures to intensify the synthesis of PAC (NTP-PAC) and enhance the further removal of Cs and Sr from wastewater. The employment of NTP in two procedures both had significantly changed the physicochemical characteristics of PAC materials, which facilitated the further adsorption application of NTP-PAC on the treatment of Cs⁺ and Sr²⁺. Different molecular, morphological, and adsorption characteristics were confirmed to the NTP-PAC materials. The heterogeneous adsorption of the NTP-PAC can be appropriately fitted by both the pseudo-first-order kinetic model and the Elovich model. Both physisorption and chemisorption reaction mechanisms were ensured for the heterogeneous adsorption of the NTP-PAC material towards Cs⁺ and Sr²⁺, which guaranteed the excellent adsorption performance of NTP-PAC materials compared to PAC. The electron collisions caused by NTP with alum pulp created highly reactive growth precursors and intensified the nucleation and hydrolysis polymerization of PAC. The employment of NTP explicitly broadens the reaction pathways between PAC and cationic contaminants in the aqueous environment, which expands the application area of PAC materials in environmental sustainability.

Development of porous material via chitosan-based Pickering medium internal phase emulsion for efficient adsorption of Rb+, Cs+ and Sr2

The radioactive Rb⁺, Cs⁺ and Sr²⁺ have serious threat for the aquatic life and human health, its removal has been granted increasing concern. Hence the adsorbent with excellent adsorption performance and favourable reusability is strongly demanded. This work prepared a novel porous polymer of chitosan-g-polyacrylamide (CTS-g-PAM) by grafting the acrylamide (AM) onto the chitosan (CTS) with sufficient pore structure via an eco-friendly surfactant-free (corn oil)-in-water Pickering medium internal phase emulsion (O/W Pickering MIPE), solely stabilized by CTS. Interestingly, its pore structure could be tuned by varying the emulsion character via changing the molecular weight and concentration of CTS, as well as the pH values. Due to the abundant -COO^- and -NH₂ functional groups in the porous material of CTS-g-PAM, the high adsorption capacities of 195.43, 237.44 and 185.63 mg/g for Rb⁺, Cs⁺ and Sr²⁺ could be reached within 40, 30 and 20 min, respectively. Moreover, the CTS-g-PAM had excellent regeneration ability and reusability. Herein, we provided a feasible and low-cost pathway for preparation of the porous adsorbent with tunable porous structure for adsorption and separation application.

Cs Adsorption and CsCl Particle Formation Facilitated by Amino Talc-like Clay in Aqueous Solutions at Room Temperature

Amino talc-like clay with an increased number of active sites and dispersion in a colloidal system has been synthesized and used for contaminant adsorption and support for nanoparticle formation. Amino talc-like clays having different number of layers and aminoalkyl ligands were synthesized and their Cs uptake behavior was examined. Cs uptake through Cs adsorption and CsCl particle formation facilitated by amino talc-like clay in a colloidal aqueous solution at room temperature are reported. The amino talc-like clay demonstrated better Cs uptake with a high initial Cs concentration than talc and montmorillonite. This might have been caused by a high concentration of trapped Cs and Cl ions in exfoliated amino clay, which eventually became CsCl particles. The formation of the CsCl particles in the amino clay depended on the clay concentration and ethanol treatment. The exfoliation of the basal sheets of the amino clay as a result of a high salt concentration and the protonation of amine induced by ethanol treatment was shown to be a precondition for CsCl particle formation. These results could promote amino talc-like clay for high-concentration Cs uptake and the green synthesis of Cs-halide particles in an aqueous solution.

Synthesis and phosphate adsorption behaviour of Mg/Al-pillared montmorillonite loaded with La(OH)3

Magnesium/aluminum-pillared montmorillonite loaded with lanthanum hydroxide (Mg/Al-MMT-La(OH)₃) was synthesized using non-toxic raw materials by ion-exchange and co-precipitation for phosphate removal from wastewater. Some adsorbents were fabricated in different molar ratios of Mg to Al, analyzed using various characterizations, and investigated in batch adsorption experiments. The determined adsorption kinetics of the 1:4 Mg/Al-MMT-La(OH)₃ composite fitted well with the Elovich model. In addition, the Langmuir model revealed the high adsorption efficiency of phosphate by the adsorbent with a maximum adsorption capacity of 79.33 mg/g. The negative value of ΔG° and positive value of ΔH° (64.25 kJ/mol) demonstrated that phosphate adsorption onto 1:4 Mg/Al-MMT-La(OH)₃ was spontaneous and endothermic in nature. Moreover, when the molar ratio of PO43- to CO32- was 1:5, the phosphate adsorption capacity reduced by 53.5%, far exceeding the effect of NO2-, NO3-, Cl^-, and SO42-. The addition of Al³⁺ caused a sharp decline in phosphate removal property by 81.9% when PO43-/Al³⁺ molar ratio was 1:5, however, the presence of other cations showed the negligible impact on it. The adsorption mechanism primarily involved ion exchange with intercalated anions and surface coordination with loaded hydroxides. Results proved that 1:4 Mg/Al-MMT-La(OH)₃ material has a favourable application potential in the surface water remediation.

Prediction and optimization of adsorption properties for Cs+on NiSiO@NiAlFe LDHs hollow spheres from aqueous solution: Kinetics, isotherms, and BBD model

In this work, novel NiSiO@NiAlFe layered double hydroxides (LDHs) hollow spheres were prepared by hydrothermal method. It was worth noting that LDHs' grafting towards NiSiO hollow spheres could avoid the LDHs' aggregation, and thus enhanced the material's adsorption capacity. Furthermore, adsorption kinetics, adsorption isotherms, and Box-Behnken Design (BBD) model were conducted. Results indicated that NiSiO@NiAlFe LDHs hollow spheres had sufficient adsorption capability towards Cs⁺. The adsorption kinetics satisfied the pseudo-second-order adsorption model, Temkin model and Langmuir isotherm model. The adsorption process was efficient at the alkaline condition (pH = 10). The adsorption kinetics indicated that the adsorption process could reach the equilibrium in only 20 min. The maximum adsorption capacity of Cs⁺ towards NiSiO@NiAlFe LDHs hollow spheres was estimated to be 61.5 mg g^-1. Moreover, the adsorption thermodynamics indicated that the adsorption process was exothermal, feasible and spontaneous. Thus, NiSiO@NiAlFe LDHs hollow spheres presented a broad potential for treating cesium containing wastewater.

Tannin-based biosorbent encapsulated into calcium alginate beads for Cr(VI) removal

A composite biosorbent (AC-TFR) prepared by encapsulating tannin-formaldehyde resin (TFR) into calcium alginate (AC) beads was used to remove Cr(VI) from an aqueous solution. Various influencing factors, such as TFR dosage, pH, initial Cr(VI) concentration, contact time, temperature and presence of co-ions in the medium, were investigated. The structures and adsorption performances of the adsorbents were characterized by Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS). Compared with other AC-TFR adsorbents, AC-TFR-2 (mass ratio of AC:TFR = 1:1) showed an excellent adsorption capacity based on the efficiency of Cr(VI) removal. The kinetic data fitted to pseudo-second-order and intra-particle diffusion models suggested that the adsorption process was subject to a rate-controlling step. The equilibrium adsorption data fitted well to the Langmuir isotherm model, and the maximum adsorption capacities of AC-TFR-2 were 145.99, 167.22 and 174.52 mg/g at 288, 298, and 308 K, respectively. The thermodynamic parameters revealed that Cr(VI) removal by AC-TFR-2 was endothermic and spontaneous, and the process was chemical adsorption. The mechanism of Cr(VI) removal consisted first of reduction to Cr(III), which has a low toxicity, and then chelation onto AC-TFR-2 via ion exchange.

Cesium retention and release from sulfur polymer concrete matrix under normal and accidental conditions

This paper proposes an efficient two-stage process for stabilization and solidification of the Cs-137 isotope in a sulfur polymer concrete (SPC) matrix. Lignite slag (SL) and fly ash (FA) were applied as active fillers for cesium immobilization. To study the release of Cs-137 isotope and determine the tracer activity in the leachates, we applied a slightly modified ANSI/ANS 16.1 protocol and the gamma spectrometry technique. The measured effective diffusion coefficients for the Cs-137 isotope were between 0.84·10^-9 and 3.10·10^-9 cm²·s^-1. Normalized leaching rates were within the range of 1.74·10^-5 - 3.85·10^-5 g·cm^-2·d^-1, fulfilling acceptance criteria for radioactive wasteforms. As well as standard leaching under static conditions, we also studied dynamic leaching of SPC samples at increased temperatures and leaching in an aggressive environment. The Cs-137 effective diffusion coefficients were found to increase by 3 - 4 orders of magnitude (10^-6 - 10^-5 cm²·s^-1), while the normalized leaching rate reached values of up to 2.36·10^-3 g·cm^-2·d^-1 after 28 days of leaching. The proposed cesium immobilization mechanism is based on the formation of cesium silicate and aluminosilicate phases, together with effective matrix sealing during the SPC manufacturing process.

Inorganic and Hybrid (Organic⁻Inorganic) Lamellar Materials for Heavy metals and Radionuclides Capture in Energy Wastes Management-A Review

The energy industry (nuclear, battery, mining industries, etc.) produces a large quantity of hazardous effluents that may contain radionuclides (¹³⁷Cs and ⁹⁰Sr in particular) and heavy metals. One of the hardest tasks of environmental safety and sustainable development is the purification of wastewater holding these pollutants. Adsorption is one of the most powerful methods for extracting toxic compounds from wastewater. This study reviews the usefulness of clay minerals as adsorbent for removing these hazardous elements to clean up energy production processes. Phyllosilicates are able to extract several heavy metals from effluent, as widely examined. A particular focus is given to synthetic phyllosilicates and their abilities to entrap heavy metals with a special attention paid to those synthesized by sol-gel route. Indeed, this method is attractive since it allows the development of organic–inorganic hybrids from organosilanes presenting various functions (amino, thiol, etc.) that can interact with pollutants. Regarding these pollutants, a part of this review focuses on the interaction of lamellar materials (natural and synthetic phyllosilicates as well as layered double hydroxide) with heavy metals and another part deals with the adsorption of specific radionuclides, cesium and strontium.

Decontamination of radioactive wastewater: State of the art and challenges forward

Radioactive substances have been widely used in many industrial sectors, e.g. nuclear power station, biomedical engineering, etc. With increasing applications of nuclear technology, more and more radioactive wastewater is being generated via different channels, which indeed is posing an emerging challenge and threat to the environment and human health. Given such a situation, this review attempts to offer a holistic view with regard to the state of the art of technology for decontamination of radioactive wastewater as well as shed lights on the challenges forward. Different from reclamation of other types of wastewaters, the most challenging issue in decontamination of radioactive wastewater is the effective stabilization and solidification of soluble radioactive nuclides present in wastewater, which are critical for final disposal. Moreover, the potential risk of human exposure to wastewater radiation needs to be carefully assessed, and this issue should also be taken into consideration in the selection, design and operation of the radioactive wastewater treatment process. These clearly differentiate the treatment principle of radioactive wastewater from those of traditional industrial and municipal wastewaters. Lastly, the challenges from the perspectives of technology development, environmental and human health impacts and possible solutions forward are also elucidated.