Utilizing recycled LiFePO4 from batteries in combination with B@C3N4 and CuFe2O4 as sustainable nano-junctions for high performance degradation of atenolol

Applications of Spent Lithium Battery Electrode Materials in Catalytic Decontamination: A Review

For a large amount of spent lithium battery electrode materials (SLBEMs), direct recycling by traditional hydrometallurgy or pyrometallurgy technologies suffers from high cost and low efficiency and even serious secondary pollution. Therefore, aiming to maximize the benefits of both environmental protection and e-waste resource recovery, the applications of SLBEM containing redox-active transition metals (e.g., Ni, Co, Mn, and Fe) for catalytic decontamination before disposal and recycling has attracted extensive attention. More importantly, the positive effects of innate structural advantages (defects, oxygen vacancies, and metal vacancies) in SLBEMs on catalytic decontamination have gradually been unveiled. This review summarizes the pretreatment and utilization methods to achieve excellent catalytic performance of SLBEMs, the key factors (pH, reaction temperature, coexisting anions, and catalyst dosage) affecting the catalytic activity of SLBEM, the potential application and the outstanding characteristics (detection, reinforcement approaches, and effects of innate structural advantages) of SLBEMs in pollution treatment, and possible reaction mechanisms. In addition, this review proposes the possible problems of SLBEMs in practical decontamination and the future outlook, which can help to provide a broader reference for researchers to better promote the implementation of “treating waste to waste” strategy.

Efficient degradation of tetracycline under the conditions of high-salt and coexisting substances by magnetic CuFe2O4/g-C3N4 photo-Fenton process

For the effective degradation of tetracycline (TC), a facilely prepared magnetic CuFe₂O₄/g-C₃N₄ (CFO/g) photocatalyst was successfully constructed. The structure, morphology, composition, optical, and magnetic properties of CFO/g were characterized. CFO/g demonstrated excellent photo-Fenton performance of TC in the presence of high-Cl^-, NO₃^-, HCO₃^-, HPO₄^2-, SO₄^2- and humic acid. Ten cycles of experiments with the removal rate of TC only decreasing by 2.8% confirmed the stability and high activity of CFO/g. The dissolved concentrations of Fe and Cu ions were 0.013 and 0.009 mg L^-1, respectively. Its excellent magnetic properties made CFO/g easier to be recycled than traditional catalysts. ·OH and O₂·^- were proposed to be the main active species in the photo-Fenton system. The CFO/g heterojunction enhanced the separation of photogenerated electron-hole pairs and visible light absorption range. Furthermore, the identification of intermediates suggested that TC degradation was classified into two pathways, and the most critical and rapid degradation was achieved within the first 30 min. The TC and its intermediates did not significantly inhibit the growth activity of Escherichia coli. This research provided a promising application of magnetic photocatalysts in wastewater treatment of pharmaceuticals and personal care products.

Predicting the trend and utility of different photocatalysts for degradation of pharmaceutically active compounds: A special emphasis on photocatalytic materials, modifications, and performance comparison

The rapid rise in the healthcare sector has led to an increase in pharmaceutically active compounds (PhACs) in different aqueous bodies. The toxicity of the PhACs and their ability to persist after conventional treatment processes have escalated research in the field of photocatalytic treatment. Although different photocatalysts have been successful in degrading PhACs, their inherent drawbacks have severely limited their application on a large scale. A substantial amount of research has been aimed at overcoming the high cost of the photocatalytic material, low quantum yield, the formation of toxic end products, etc. Hence, to further research in this field, researchers must have a fair idea of the current trends in the application of different photocatalysts. In this article, the trends in the use of various photocatalysts for the removal of different PhACs have been circumscribed. The performance of different groups of photocatalysts to degrade PhACs from synthetic and real wastewater has been addressed. The drawbacks and advantages of these materials have been compared, and their future in the field of PhACs removal has been predicted using S-curve analysis. Zinc and titanium-based photocatalysts were efficient under UV irradiation, while bismuth and graphene-based materials exhibited exemplary performance in visible light. However, iron-based compounds were found to have the most promising future, which may be because of their magnetic properties, easy availability, low bandgap, etc. Different modification techniques, such as morphology modification, doping, heterojunction formation, etc., have also been discussed. This study may help researchers to clarify the current research status in the field of photocatalytic treatment of PhACs and provide valuable information for future research.

Predictive models for the degradation of 4 pharmaceutically active compounds in municipal wastewater effluents by the UV/H2O2 process

Pharmaceutically active compounds (PhACs) have been frequently detected in aquatic environment and raised concerns because of their environmental persistence and potential ecological risk, especially carbamazepine (CBZ), erythromycin (ERY), atenolol (ATL) and clofibric acid (CA). The UV/H₂O₂ advanced oxidation process was considered as an effective process to remove pharmaceuticals in wastewater. Because of the diverse structure of pharmaceuticals and the various wastewater matrices, this study established two models to predict the degradation of 4 PhACs in wastewater by UV/H₂O₂. Besides, the degradation pathway and toxicity of 4 PhACs by UV/H₂O₂ were explored. The degradation of 4 PhACs by UV/H₂O₂ followed the pseudo first-order kinetics pattern. The degradation rate of pharmaceuticals decreased as CBZ > ATL > CA > ERY. A kinetic model combining the steady state concentrations of HO∙ successfully predicted the degradation process of pharmaceuticals in 14 secondary municipal wastewater effluents. Also, a water matrix prediction model by response surface methodology (RSM) was established to estimate the degradation of pharmaceuticals well. A detailed and systematic comparison of two models in the objectives of models, predicting target contaminants, types of wastewater and parameters of models was made. In addition, the tentative transformation pathways of 4 PhACs by UV/H₂O₂ were proposed. 4 PhACs after UV/H₂O₂ treatment enhanced the toxicity, and prolongation of treatment time can reduce the toxicity on the luminescence.

Influence of parameters and radical scavengers on the visible-light-induced degradation of ciprofloxacin in ZnO/SnS2 nanocomposite suspension: Identification of transformation products

Removal of ciprofloxacin (CIP) pollutant from wastewater using conventional process is particularly challenging due to poor removal efficiency. In this work, CIP was photocatalytically degraded using a porous ZnO/SnS₂ photocatalyst prepared via microwaves. The influence of process parameters (e.g., pH, catalyst mass and initial CIP concentration) and radical scavengers on visible-light induced degradation of CIP on the catalyst was investigated. From the study, it was found that visible-light induced degradation of CIP on ZnO/SnS₂ is a surface-mediated process and the reaction kinetics followed the Langmuir-Hinshelwood first-order kinetics. It was found that the optimum condition for CIP degradation was at pH of 6.1 and catalyst dosage of 500 mg L^-1. Higher catalyst dosage however led to a decline in reaction rate due to light scattering effect and reduction in light penetration.

Features of electron beam deposition of polymer coatings with the prolonged release of the drug component

The first part of the paper provides a comprehensive analysis of the features of electron beam formation of polymer coatings with the prolonged release of the drug compound using ciprofloxacin and clotrimazole as an example. The influence features of the low-energy electron beam on the molecular structure of medicinal chemical preparations have been established. The impossibility of producing the coatings based on medicinal compounds with a complex molecular structure (vancomycin, micafungin, etc.) by a low-energy electron beam has been justified. The second part of the paper introduces a fundamentally new vacuum method for the formation of the composite coatings based on antibiotics and antifungal drugs, accompanied by the prolonged release of the drug component. This method allows the formation of composite coatings based on medicinal compounds with a complex molecular structure. It is effective for modifying implants to prevent the risk of implant-associated infectious complications which are the result of the occurrence of mixed biofilms. The method can be used to form composite layers based on topical antitumor drugs for cancer control.

Wide spectral degradation of Norfloxacin by Ag@BiPO4/BiOBr/BiFeO3 nano-assembly: Elucidating the photocatalytic mechanism under different light sources

Metallic Ag deposited BiPO₄/BiOBr/BiFeO₃ ternary nano-hetero-structures were rationally designed and synthesized by a simple precipitation-wet impregnation-photo deposition method. The plasmonic junction possesses an excellent wide spectrum photo-response and makes best use of BiPO₄ which is otherwise a poor photocatalyst. Ag@BiPO₄/BiOBr/BiFeO₃ showed superior photocatalytic activity for degradation of norfloxacin (NFN) under visible, ultra-violet, near-infra-red and natural solar light. Especially catalyst APBF-3 (0.3 wt% Ag@BiPO₄/BiOBr/BiFeO₃) shows 98.1% degradation of NFN (20 mg/L) in 90 min under visible light and 99.1% in less than 45 min under UV exposure. Free radical scavenging experiments and electron spin resonance (ESR) results has been used for explanation of charge transfer, photocatalytic mechanism and role of radicals for binary, ternary and Ag deposited ternary junctions for UV and visible exposure. Metallic Ag in addition to its surface plasmon resonance helps in protection of high conduction band and valence band in the three semiconductors. A dual Z-scheme mechanism has been predicted by comparing with possibilities of double charge and vectorial charge transfer.

High-Performance Photocatalytic Hydrogen Production and Degradation of Levofloxacin by Wide Spectrum-Responsive Ag/Fe3O4 Bridged SrTiO3/g-C3N4 Plasmonic Nanojunctions: Joint Effect of Ag and Fe3O4

Highly photoresponsive semiconductor photocatalysis for energy and environmental applications require judicious choice and optimization of semiconductor interfaces for wide spectral capabilities. This work aims at rational designing of highly active SrTiO₃/g-C₃N₄ junctions bridged with Ag/Fe₃O₄ nanoparticles for utilizing Z-scheme transfer and surface plasmon resonance effect of Ag augmented by iron oxide. The SrTiO₃/(Ag/Fe₃O₄)/g-C₃N₄ (SFC) catalyst was employed for photocatalytic hydrogen production and photodegradation of levofloxacin (LFC; 20 mg/L) under UV, visible, near infra-red, and natural solar light exhibiting high performance. Under visible light (<780 nm), SFC-3 sample (30 wt % g-C₃N₄ and 3% Ag/Fe₃O₄) shows a H₂ evolution of 2008 μmol g^-1 h^-1 which is ∼14 times that of bare g-C₃N₄. In addition, 99.3% removal of LFC was degraded in 90 min under visible light with retention of activity under sun. The inherent topological properties, complete, higher charge separation, and reduced recombination allowed this catalyst for a high photocatalytic response which was proved by UV-diffuse reflectance spectroscopy, photoluminescence, electrochemical impedance spectroscopy, and photocurrent response measurements. Scavenging experiments and electron spin resonance analysis reveal that the mechanism shifts from a dual charge transfer in case of binary junction to essential Z-scheme with incorporation of Ag/Fe₃O₄. Both ^•O₂^- and ^•OH are main active radicals in visible light, whereas ^•O₂^- majorly participate under UV. The synergistic effect of SrTiO₃, g-C₃N₄, and plasmon resonance of Ag/Fe₃O₄ not only improves light response and reduce recombination but also enhances the redox-ability of charge carriers. A H₂ production mechanism and LFC degradation pathway (degradation, defluorination, and hydrolysis) has been predicted. This work paves a way for development of photocatalysts working in practical conditions for pollution and energy issues.