Electrochemical production of perchlorate as an alternative for the valorization of brines

Treatment of Organics in Wastewater Using Electrogenerated Gaseous Oxidants

This work focuses on the comparison of the performance of direct electrochemical oxidation with indirect electrolysis mediated by gaseous oxidants in the treatment of diluted wastewater. To do this, energy consumptions of the electrolysis using mixed metal oxide (MMO) electrodes are compared with those required for the production and use of chlorine dioxide in the degradation of methomyl contained in aqueous solutions. Results demonstrate the feasibility of the mediated oxidation process and that this process is competitive with direct oxidation. The oxidants are produced under optimized conditions using the same anodic material applied for the direct degradation of organics, thus avoiding efficiency losses associated with mass transfer limitations in the degradation of dilute organic solutions. Thus, using the ClO2 gaseous oxidant, a concentration of 0.1 mM of methomyl from a solution containing 500 mL is completely removed with an energy consumption as low as 50 Wh. The application of the same energy to a direct electrolytic process for treating the same wastewater can only reach less than half of this removal. These findings may have a very important application in the use of electrochemical technology to achieve the remediation of persistent pollutants in wastewater, where their low concentrations typically make direct processes very inefficient.

Full and Sustainable Electrochemical Production of Chlorine Dioxide

With the final purpose of manufacturing electrochemically-based devices that produce chloride dioxide efficiently, this paper focuses on the production of chlorates and hydrogen peroxide in two different electrochemical cells, in which operation conditions are selected to obtain high efficiencies, and in the subsequent combination of both electrochemically manufactured solutions to produce chlorine dioxide. Results demonstrate that suitable reagents can be produced by electrolyzing 20 g L−1 sodium chloride solutions at 50 mA cm−2 and 50 °C, and 3000 mg L−1 NaClO4 solutions at 5.0 mA cm−2 and 15 °C with current efficiencies of 30.9% and 48.0%, respectively. Different tests performed with these electrolyzed solutions, and also with commercial hydrogen peroxide and chlorate solutions, demonstrate that the ratio between both reagents plays a very important role in the efficiency in the production of chlorine dioxide. Results clearly showed that, surplus chlorate should be contained in the reagent media to prevent further reduction of chlorine dioxide by hydrogen peroxide and consequently, loses of efficiency in the process. During the reaction, a gas with a high oxidation capacity and consisting mainly in chloride dioxide is produced. The results contributed to the maximum conversion reached being 89.65% using electrolyzed solutions as precursors of ClO2, confirming that this technology can be promising to manufacture portable ClO2 devices.