Characterisation and utilization of steel industry waste sludge as heterogeneous catalyst for the abatement of chlorinated organics by advanced oxidation processes

Waste to catalyst: Role of agricultural waste in water and wastewater treatment

Presently, owing to the rapid development of industrialization and urbanization activities, a huge quantity of wastewater is generated that contain toxic chemical and heavy metals, imposing higher environmental jeopardies and affecting the life of living well-being and the economy of the counties, if not treated appropriately. Subsequently, the advancement in sustainable cost-effective wastewater treatment technology has attracted more attention from policymakers, legislators, and scientific communities. Therefore, the current review intends to highlight the recent development and applications of biochars and/or green nanoparticles (NPs) produced from agricultural waste via green routes in removing the refractory pollutants from water and wastewater. This review also highlights the contemporary application and mechanism of biochar-supported advanced oxidation processes (AOPs) for the removal of organic pollutants in water and wastewater. Although, the fabrication and application of agriculture waste-derived biochar and NPs are considered a greener approach, nevertheless, before scaling up production and application, its toxicological and life-cycle challenges must be taken into account. Furthermore, future efforts should be carried out towards process engineering to enhance the performance of green catalysts to improve the economy of the process.

Recent Development in Sludge Biochar-Based Catalysts for Advanced Oxidation Processes of Wastewater

Sewage sludge as waste of the wastewater treatment process contains toxic substances, and its conversion into sludge biochar-based catalysts is a promising strategy that merges the merits of waste reutilization and environmental cleanup. This study aims to systematically recapitulate the published articles on the development of sludge biochar-based catalysts in different advanced oxidation processes of wastewater, including sulfate-based system, Fenton-like systems, photocatalysis, and ozonation systems. Due to abundant functional groups, metal phases and unique structures, sludge biochar-based catalysts exhibit excellent catalytic behavior for decontamination in advanced oxidation systems. In particular, the combination of sludge and pollutant dopants manifests a synergistic effect. The catalytic mechanisms of as-prepared catalysts in these systems are also investigated. Furthermore, initial solution pH, catalyst dosage, reaction temperature, and coexisting anions have a vital role in advanced oxidation processes, and these parameters are systematically summarized. In summary, this study could provide relatively comprehensive and up-to-date messages for the application of sludge biochar-based catalysts in the advanced oxidation processes of wastewater treatment.

The behavior of surface acidity on photo-Fenton degradation of ciprofloxacin over sludge derived carbon: Performance and mechanism

Sludge derived carbon (SC) has been widely used in advanced oxidation processes as an effective and economic catalyst. In this study, we applied surface modified SC for the first time to catalyze the heterogeneous photo-Fenton process with ciprofloxacin, a highly concerned emerging contaminant, as a model substance. H₂SO₄ was used to acidify the SCs under varying acid dosages, temperatures, and reaction time lengths. The surface acidity of SCs was quantitatively characterized with NH₃-TPD. A strong correlation between the surface acidity and the catalytic activity was clearly demonstrated. The highest catalytic activity was obtained with SC whose acidity was 0.149 mmol·g^-1 after being modified with 6 mol·L^-1 H₂SO₄ at -20 ℃ for 24 h. In addition, XRD, XRF, BET, XPS, and HRTEM were also used to characterize the obtained SC. ·OH radicals were found to be the main reactive species by EPR. Ten transformation products were identified by GC-MS, based on which three possible reaction pathways were proposed.

A review on fabricating functional materials by heavy metal-containing sludges

With the development of industry, sustainable use of natural resources has become a worldwide hot topic. Heavy metal-containing sludge (HMS) is a hazardous waste after wastewater treatment. At present, HMS is still treated by landfill or landfill after incineration. Considering the components, HMS usually contains various heavy metals and organic compounds, which is potentially used as a raw resource for catalyst production. This review thus concludes recent reports and developments in this field. First, basic technologies are summarized as component regulation, precursor formation, and structure transformations. Second, prepared materials are applied in various catalytic fields, such as gas purification, photocatalysis, electrocatalysis, and Fenton catalysis. During these processes, key factors are multi-metallic components, metal doping, temperature, and pH. They not only influence the formation of HMS-derived catalyst but also the catalytic activity. Furthermore, catalytic activities of HMS-derived catalysts are compared with those synthesized by pure reagents. An assessment and accounting are also supplied if raw resources are substituted by HMS. Finally, in order to apply HMS in a real application, more works must be devoted to the influence of trace metal doping on catalytic activities and stabilities. Besides, more pilot experiments are urgently necessary.