Cellulose-metallothionein biosorbent for removal of Pb(II) and Zn(II) from polluted water

Alginate functionalized sugarcane cellulose-based beads to improve methylene blue adsorption from aqueous solution

The study was carried out with the goal of synthesizing composite bead of cellulose, chitosan functionalized by sodium alginate using as an efficient and applicable adsorbent for methylene blue removal. Fabricating parameters of the material synthesis process like cellulose mass, sodium hydroxide concentration, immersing time and sodium alginate concentration were assessed in detail. The dye adsorption performance in water under the influence of pH, contact time, dye initial concentration, the material mass, shaking speed, temperature was also thoroughly evaluated. The results of advanced analyses showed that the beads were successfully synthesized with a rough surface and mesoporous structure. The adsorption isotherm and adsorption kinetics of dye adsorption process exhibited that the process was consistent with the Freundlich adsorption isotherm and the pseudo-second-order kinetic model, indicating a favorable physical adsorption process with multilayer of the dye on the adsorbent surface. The intra-particle diffusion model showed the strong dye adsorption by the beads occurred during the first two and half hours. The adsorbent could maintain its adsorption performance of 86 % for three times of regeneration. Finally, this study provided a recyclable and effective adsorbent for dyes separation from water.

Utilisation of acid-tolerant bacteria for base metal recovery under strongly acidic conditions

Hydrometallurgical bioprocesses for base metal recovery in environmentally friendly electronic device waste (e-waste) recycling are typically studied under neutral pH conditions to avoid competition between metals and hydrogen ions. However, metal leachate is generally strongly acidic, thus necessitating a neutralisation process in the application of these bioprocesses to e-waste recycling. To solve this pH disparity, we focused on acid-tolerant bacteria for metal recovery under strongly acidic conditions. Four acid-tolerant bacterial strains were isolated from neutral pH environments to recover base metals from simulated waste metal leachate (pH 1.5, containing 100 or 1000 mg L-1 of Co, Cu, Li, Mn, and Ni) without neutralisation. The laboratory setting for sequential metal recovery was established using these strains and a reported metal-adsorbing bacterium, Micrococcus luteus JCM1464. The metal species were successfully recovered from 100 mg L-1 metal mixtures at the following rates: Co (8.95%), Cu (21.23%), Li (5.49%), Mn (13.18%), and Ni (9.91%). From 1000 mg L-1 metal mixtures, Co (7.23%), Cu (6.82%), Li (5.85%), Mn (7.64%), and Ni (7.52%) were recovered. These results indicated the amenability of acid-tolerant bacteria to environmentally friendly base metal recycling, contributing to the development of novel industrial application of the beneficial but unutilised bioresource comprising acid-tolerant bacteria.

Synthesis of Some Eco-Friendly Materials for Gold Recovery

The aim of this study was to develop new materials with adsorbent properties that can be used for the adsorption recovery of Au(III) from aqueous solutions. To achieve this result, it is necessary to obtain inexpensive adsorbent materials in a granular form. Concomitantly, these materials must have a high adsorption capacity and selectivity. Other desired properties of these materials include a higher physical resistance, insolubility in water, and materials that can be regenerated or reused. Among the methods applied for the separation, purification, and preconcentration of platinum-group metal ions, adsorption is recognised as one of the most promising methods because of its simplicity, high efficiency, and wide availability. The studies were carried out using three supports: cellulose (CE), chitosan (Chi), and diatomea earth (Diat). These supports were functionalised by impregnation with extractants, using the ultrasound method. The extractants are environmentally friendly and relatively cheap amino acids, which contain in their structure pendant groups with nitrogen and sulphur heteroatoms (aspartic acid-Asp, l-glutamic acid-Glu, valine-Val, DL-cysteine-Cys, or serine-Ser). After preliminary testing from 75 synthesised materials, CE-Cys was chosen for the further recovery of Au(III) ions from aqueous solutions. To highlight the morphology and the functionalisation of the material, we physicochemically characterised the obtained material. Therefore, the analysis of the specific surface and porosity showed that the CE-Cys material has a specific surface of 4.6 m2/g, with a porosity of about 3 nm. The FT-IR analysis showed the presence, at a wavelength of 3340 cm-1, of the specific NH bond vibration for cysteine. At the same time, pHpZc was determined to be 2.8. The kinetic, thermodynamic, and equilibrium studies showed that the pseudo-second-order kinetic model best describes the adsorption process of Au(III) ions on the CE-Cys material. A maximum adsorption capacity of 12.18 mg per gram of the adsorbent material was achieved. It was established that the CE-Cys material can be reused five times with a good recovery degree.

Metallothionein: A Comprehensive Review of Its Classification, Structure, Biological Functions, and Applications

Metallothionein is a cysteine-rich protein with a high metal content that is widely found in nature. In addition to heavy metal detoxification, metallothionein is well known as a potent antioxidant. The high sulfhydryl content of metallothionein confers excellent antioxidant activity, enabling it to effectively scavenge free radicals and mitigate oxidative stress damage. In addition, metallothionein can play a neuroprotective role by alleviating oxidative damage in nerve cells, have an anticancer effect by enhancing the ability of normal cells to resist unfavorable conditions through its antioxidant function, and reduce inflammation by scavenging reactive oxygen species. Due to its diverse biological functions, metallothionein has a broad potential for application in alleviating environmental heavy metal pollution, predicting and diagnosing diseases, and developing skin care products and health foods. This review summarizes the recent advances in the classification, structure, biological functions, and applications of metallothionein, focusing on its powerful antioxidant effects and related functions.

Ag+-stabilized DNA triplex coupled with catalytic hairpin assembly and CRISPR/Cas12a amplifications for sensitive metallothionein assay

Metallothionein (MT) is a protein biomarker secreted by liver in response to the treatment for heavy metal toxicity and oncological diseases. On the basis of a new Ag+-stabilized DNA triplex probe (Ag+-SDTP), we establish a fluorescent biosensing system for high sensitivity detection of MT by combining catalytic hairpin assembly (CHA) and the CRISPR/Cas12a signal enhancements. The MT analyte complexes with Ag+ in Ag+-SDTP to disrupt the triplex structure and to release the ssDNA strands, which trigger subsequent CHA formation of many protospacer adjacent motif (PAM)-containing dsDNAs from two hairpins. Cas12a/crRNA further recognizes these PAM sequences to activate its trans-catalytic activity to cyclically cleave the fluorescently quenched ssDNA reporters to recovery drastically amplified fluorescence for detecting MT down to 0.34 nM within the dynamic range of 1∼800 nM. Moreover, the sensing method is able to selectively discriminate MT from other non-specific molecules and can realize low level detection of MT in diluted human serums, manifesting its potentiality for monitoring the disease-specific MT biomarker at trace levels.

Designing of a cellulose-based ion-imprinted biosorbent for selective removal of lead (II) from aqueous solutions

Developing an effective adsorbent for Pb2+ removal from wastewater has huge economic and environmental implications. Adsorbents made from cellulosic materials that have been modified with certain chelators could be used to get rid of metal cations from aqueous solutions. However, their selectivity for specific metals remains very low. Here, we describe the synthesis of 4-(2-pyridyl)thiosemicarbazide (PTC) hydrazidine-functionalized cellulose (Pb-PTC-CE), a polymer imprinted with Pb2+ ions that may be used to remove Pb2+ ions from wastewater. Owing to its potent -NH2 functionalization, PTC hydrazidine not only served as an efficient chelator to effectively supply coordinating sites and construct hierarchical porous structures on Pb-PTC-CE, but it also made it possible for cross-linking to occur through the glyoxal cross-linker. The abundant chelators, along with the hierarchical porous construction of the developed Pb-PTC-CE with PTC functionality, result in a greater sorption capacity of 336 mg/g and a short sorption period of 40 min for Pb2+. Additionally, Pb-PTC-CE exhibits highly selective Pb2+ uptake compared to competing ions. This study proposes a feasible methodology for the development of high-quality materials for Pb2+ remediation by combining the advantages of active ligand functionality with ion-imprinting techniques in a straightforward way.

Development and assessment of isatin hydrazone-functionalized/ion-imprinted cellulose adsorbent for gadolinium (III) removal

It is of tremendous economic and environmental significance to obtain a powerful adsorbent for the extraction of Gd3+ from wastewater. Adsorbents derived from cellulosic materials functionalized with specific chelators show great promise for the removal of heavy metal ions from wastewater. The selectivity of these sorbents for metal ions is, however, still rather poor. Here, we present a technique for trapping Gd3+ ions from wastewater by synthesizing Gd3+ ion-imprinted polymers based on isatinhydrazone-functionalized cellulose (Gd-ISH-CE). Not only did isatinhydrazone work as a tridentate ligand to directly provide ligand vacancies and build hierarchy pores on Gd-ISH-CE, but it also enabled cross-linking through the epichlorohydrine cross-linker thanks to its very effective NH2 functionalization. The as-prepared Gd-ISH-CE with ISH functionality shows a high adsorption capacity of 275 mg/g and a rapid equilibration time of 30 min for Gd3+ due to its plentiful binding sites and hierarchical pore structure. Furthermore, Gd-ISH-CE shows very selective capture of Gd3+ over competing ions. By integrating the benefits of ion-imprinting and chelator functionalization methodologies in an effortless manner, this study presents a practical approach to the development of superior materials for Gd3+ recovery.

Preparation and performance of bionanocomposites based on grafted chitosan, GO and TiO2-NPs for removal of lead ions and basic-red 46

Wastewater rich in heavy metals and organic compounds represents one of the essential environmental pollutants. Therefore, a practical approach is to fabricate eco-friendly polymer-based systems with a high ability to absorb pollutants. Herein, bionanocomposites consisting of chitosan (Cs) grafted by various monomers, such as acrylamide (Am), acrylic acid (AA), and 4-styrene sulfonic acid (SSA), and hybrid nanoparticles of graphene oxide/titanium dioxide nanoparticles (GO@TiO₂-NPs) were fabricated. The prepared nanomaterials and bionanocomposites characterized via various tools. The data illustrated that the prepared GO had a thickness of 10 nm and TiO₂-NPs had a diameter of 25 nm. In addition, the grafted chitosan (gCs) using Am and SSA had the largest surface area (gCs2; 22.89 nm) and its bionanocomposite (NC5; 104.79 nm). In addition, the sorption ability of the 0.15 g of prepared bionanocomposites to the (100 mg/L) of lead ions (Pb²⁺) and (25 mg/L) of basic-red 46 (BR46) under various conditions has been studied. The results showed that gCs3 and NC5 had the highest adsorption of Pb²⁺ (79.54 %) and BR46 (79.98 %), respectively. The kinetic study results of the sorbents obeyed the Pseudo second-order model. In contrast, the isothermal study followed the Freundlich adsorption model for Pb²⁺ and the Langmuir adsorption model for BR46.

Genetically modified metallothionein/cellulose composite material as an efficient and environmentally friendly biosorbent for Cd2+ removal

Metallothioneins (MTs) are a class of cysteine-rich metal-binding proteins. Cadmium (Cd) is one of the toxic heavy metal pollutants. In our previous research, the full-length cDNA of MT (Cd specificity) from freshwater crab (Sinopotamon henanense) (ShMT) was cloned and genetically modified to ShMT3 by site-directed mutagenesis to enhance the tolerance for Cd²⁺, however, it was limited in actual Cd²⁺ adsorption due to instability. Here, ShMT3-CBM, a novel recombinant fusion protein, was prepared. CBM is a carbohydrate binding module that can specifically bind cellulose while ShMT3 can effectively chelate Cd²⁺. The biosorbent Cellulose1-ShMT3-CBM was obtained by screening suitable cellulose materials. The selective adsorption experiments showed that Cellulose1-ShMT3-CBM had a preference for Cd²⁺. In low-concentration Cd²⁺ solutions, the removal efficiency was >99 %, and the adsorption equilibrium was reached within 15 min. The saturated adsorption capacity of Cellulose1-ShMT3-CBM for Cd²⁺ is 180.35 ± 4.67 mg/g (Dry Weight). Regeneration experiments showed that adsorption efficiency was maintained after six cycles. The MTT experiment showed that Cellulose1-ShMT3-CBM had low cytotoxicity. Meanwhile, Cellulose1-ShMT3-CBM can preferentially remove Cd²⁺ in actual water samples and boiler sewage. In this study, an environmentally friendly biosorbent which can adsorb Cd²⁺ efficiently and quickly was prepared for actual water treatment.

Toxicological assessment and adsorptive removal of lead (Pb) and Congo red (CR) from water by synthesized iron oxide/activated carbon (Fe3O4/AC) nanocomposite

Heavy metals and dyes are the persistent pollutants causing harmful effects on living organisms in different ecosystems. In current study, removal of Lead (Pb) and Congo Red (CR) from water was performed using Iron oxide/Activated Carbon (Fe₃O₄/AC) nanocomposite. Ferromagnetic behavior of the nanocomposite is the crucial advantage in separation of nanocomposite after biosorption process. The biosorbent was thermally stable till 800 °C of temperature. The synthesized biosorbent was polycrystalline in nature comprising of elements like C, O, Fe. The influence of various experimental conditions was optimized through batch study with the biosorption capacity of 144.92 mg/g (Pb) and 122.22 mg/g (CR) at pH 5-6, Fe₃O₄/AC dosage (0.04 g) for 40 mg/L of Pb and CR. Toxicological assessment was performed using Danio rerio and seeds to evaluate the harmful effects of pollutants on these organisms. The phytotoxicity results revealed that growth inhibition of seeds lies between 85.64% and 55.92% (Pb) and 77.94%-51.85% (CR). The LC₅₀ value of Pb on the Danio rerio was found to be 20.98 mg/L. In contrast, we observed significant increase in LC₅₀ value about 86.82 mg/L after biosorption of Pb onto biosorbent.

Progress in surface-modified silicas for Cr(VI) adsorption: A review

Various toxic chemicals are discharging to the environment due to rapid industrialization and polluting soil, water, and air causing numerous diseases including life-threatening cancer. Among these pollutants, Cr(VI) or hexavalent chromium is one of the most carcinogenic and toxic contaminants hostile to human health and other living things. Therefore, along with other contaminants, the removal of Cr(VI) efficiently is very crucial to keep our environment neat and clean. On the other hand, silica has a lot of room to modify its surfaces as it is available with various sizes, shapes, pore sizes, surface areas etc. and the surface silanol groups are susceptible to design and prepare adsorbents for Cr(VI). This review emphases on the progress in the development of different types of silica-based adsorbents by modifying the surfaces of silica and their application for the removal of Cr(VI) from wastewater. Toxicity of Cr(VI), different silica surface modification processes, and removal techniques are also highlighted. The adsorption capacities of the surface-modified silica materials with other parameters are discussed extensively to understand how to select the best condition, silica and modifiers to achieve optimum removal performance. The adsorption mechanisms of various adsorbents are also discussed. Finally, future prospects are summarized and some suggestions are given to enhance the adsorption capacities of the surface-modified silica materials.

Efficient sequestration of lead from aqueous systems by peanut shells and compost: evidence from fixed bed column and batch scale studies

Lead (Pb) is a pervasive contaminant and poses a serious threat to living beings. The present study aims at batch and fixed bed column scale potential of commercial compost (CCB) and peanut shells biosorbents (PSB) for the sequestration of Pb from contaminated aqueous systems. The PSB and CCB were characterized with FTIR, SEM and Brunauer Emmett-Teller (BET) to get insight of the adsorption behavior of both materials. Fixed bed column scale experiments were performed at steady state flow (2.5 and 5.0 mL/min), initial Pb concentrations (25 and 50 mg/L) and dosage of each adsorbent (3.0 and 6.0 g/column). Columns packed (15.9 cm2) with PSB and CCB have revealed excellent adsorption of Pb with PSB as compared with CCB. The total volume of injected contaminated water was 1,500 mL and 3,000 mL at 2.5 and 5.0 mL/min, respectively while total bed volume number was 157. A series of batch experiments with CCB and PSB was conducted at adsorbent dosage (1.25–5.0 g/L), initial Pb level (25–100 mg/L), interaction time (0–180 min) and solution pH (4–10) at room temperature. Batch scale results revealed that PSB removed 92% Pb from water at 25 mg Pb/L concentration as compared with CCB (79%). The presence of competing ions in groundwater showed less Pb removal as compared with synthetic water. The experimental data were simulated with equilibrium isothermal models: Langmuir, Freundlich, and kinetic models: pseudo first order, pseudo second order and intra-particle diffusion. The Freundlich and pseudo second order models better described the equilibrium and kinetic experimental data, respectively with maximum sorption of 42.5 mg/g by PSB which is also evident from FTIR functional groups and SEM results. While equilibrium sorption of Pb onto CCB was equally explained by Freundlich and Langmuir models. These findings indicate that PSB could be an active and ecofriendly biosorbent for the sequestration of metals from contaminated aqueous systems.

Central Composite Design for Adsorption of Pb(II) and Zn(II) Metals on PKM-2 Moringa oleifera Leaves

Biosorption is a very effective technique to eliminate the heavy metals present in the wastewater that utilize nongrowing biomass. The adsorption ability of the Periyakulam-2 (PKM-2) variety of Moringa Oleifera leaves (MOLs) to eliminate Pb(II) and Zn(II) ions from an aqueous solution was examined in this work. Fourier transform infrared (FTIR) spectroscopy, field-emission scanning electron microscopy, energy-dispersive X-ray (EDX) analysis, X-ray powder diffraction, and Brunauer-Emmett-Teller methods were used to characterize the PKM-2 variety of MOLs. The set of variables consists of the metal ion initial concentration, a dosage of the adsorbent, and pH were optimized with the help of the response surface methodology to get maximum metal removal efficiency of lead and zinc metals using the PKM-2 MOL biosorbent. A maximum Pb(II) removal of 95.6% was obtained under the condition of initial concentration of metal ions 38 mg/L, a dosage of the adsorbent 1.5 g, and pH 4.7, and a maximum zinc removal of 89.35% was obtained under the condition of initial concentration of metal ions 70 mg/L, a dosage of the adsorbent 0.6 g, and pH 3.2. The presence of lead and zinc ions on the biosorbent surface and the functional groups involved in the adsorption process were revealed using EDX and FTIR analysis, respectively. The adsorption data were evaluated by employing different isotherm and kinetic models. Among the isotherm models, Langmuir's isotherm showed that the best fit and maximum adsorption capacities are 51.71 and 38.50 mg/g for lead and zinc, respectively. Kinetic studies showed accordance with the pseudo-second-order model to lead and zinc metal adsorption. Thermodynamic parameters confirmed (ΔG° < 0, ΔH° < 0, and ΔS° > 0) that the sorption mechanism is physisorption, exothermic, spontaneous, and favorable for adsorption. The results from this study show that the MOL of the PKM-2 type is a promising alternative for an ecofriendly, low-cost biosorbent that can effectively remove lead and zinc metals from aqueous solutions.

Genetic modifications of metallothionein enhance the tolerance and bioaccumulation of heavy metals in Escherichia coli

Metallothioneins (MTs) are low molecular weight cysteine-rich proteins that bind to metals. Owing to their high cysteine (Cys) content, MTs are effective mediators of heavy metal detoxification. To enhance the heavy metal binding ability of MT from the freshwater crab Sinopotamon henanense (ShMT), sequence-based multiple sequence alignment (MSA) and structure-based molecular docking simulation (MDS) were conducted in order to identify amino acid residues that could be mutated to bolster such metal-binding activity. Site-directed mutagenesis was then used to modify the primary structure of ShMT, and the recombinant proteins were further enhanced using the SUMO fusion expression system to yield SUMO-ShMT1, SUMO-ShMT2, and SUMO-ShMT3 harboring one-, two-, and three- point mutations, respectively. The resultant modified proteins were primarily expressed in a soluble form and exhibited the ability to readily bind to heavy metals. Importantly, these modified proteins exhibited significantly enhanced heavy metal binding capacities, and they improved Cd²⁺, Cu²⁺ and Zn²⁺ tolerance and bioaccumulation in Escherichia coli (E. coli) in a manner dependent upon the number of introduced point mutations (SUMO-ShMT3 > SUMO-ShMT2 > SUMO-ShMT1 > SUMO-ShMT > control). Indeed, E. coli cells harboring the pET28a-SUMO-ShMT3 expression vector exhibited maximal Cd²⁺, Cu²⁺, and Zn²⁺ bioaccumulation that was increased by 1.86 ± 0.02-, 1.71 ± 0.03-, and 2.13 ± 0.02-fold relative to that in E. coli harboring the pET28a-SUMO-ShMT vector. The present study offers a basis for the preparation of genetically engineered bacteria that are better able to bioaccumulate and tolerate heavy metals, thus providing a foundation for biological heavy metal water pollution treatment.

Fabrication of silica on chitin in ambient conditions using silicatein fused with a chitin-binding domain

High temperatures, harsh pH conditions, and toxic chemicals involved in the conventional synthesis and coating of silica limit the fabrication of new-generation hybrid materials immobilizing live cells and biomolecules such as enzymes and drugs. This hinders the application of inorganic-organic biohybrid materials in various fields, including bioelectronics, energy generation, and biomedicine. Silicatein, an enzyme found in siliceous sponges, catalyzes the polymerization of silica under mild conditions, that is, at room temperature and neutral pH. Silicatein was fused with a chitin-binding domain (ChBD) to selectively bind the fusion silicatein on the chitin material and with a small soluble tag called InakC, a hydrophilic protein from Pseudomonas syringae, to control the unfavorable aggregation of silicatein. The fusion silicatein was soluble in aqueous media and was successfully found to be adsorbed on the chitin material. The immobilized fusion silicatein acted as an interfacial catalyst to fabricate silica on chitin under ambient conditions. This technique can be used to fabricate inorganic-organic hybrid materials to immobilize biomolecules and can be applied to develop novel biocatalytic systems, biosensors, and tissue culture scaffolds.

Removal of toxic arsenic (As(Ⅲ)) from industrial wastewater by ultrasonic enhanced zero-valent lead combined with CuSO4

Arsenic was one of toxic element in industrial wastewater. Removal of arsenic has always been a hot research topic in academia. Herein, arsenic (As(Ⅲ)) in industrial wastewater was removed by ultrasonic enhanced zero-valent lead combined with copper sulfate (CuSO₄). Secondary pollution would not be caused by the addition of zero-valent lead and copper sulfate. Parameters, such as Pb/As molar ratio, the amount of CuSO₄ added, reaction temperature, ultrasonic power and reaction time were investigated in this study. It was concluded that the removal of arsenic could be described by an unreacted shrinking nuclear model with activation energy 1.857 kJ/mol. The process of ultrasonic enhanced zero-valent lead combined with CuSO₄ to remove arsenic was a diffusion controlled process. The precipitation after arsenic removal was characterized by XRD, SEM-EDS, XRF, and XPS to analyze the precipitated phases, topography, element content and different valence state of element. Based on the above analysis, the thermodynamic data and changes in ion concentration, the mechanism of efficient removal of arsenic (As(Ⅲ)) from industrial wastewater by ultrasonic enhanced zero-valent lead combined with CuSO₄ was revealed.

Magnetic phosphorylated chitosan composite as a novel adsorbent for highly effective and selective capture of lead from aqueous solution

Separating and recovering lead from heavy metal contaminated wastewater is crucial for the environment remediation and reutilization of lead resources. Herein, a novel adsorbent, the phosphorylated chitosan-coated magnetic silica nanoparticles (Fe₃O₄@SiO₂@CS-P), was successfully fabricated and applied to highly selective adsorption of lead. Competitive experiments were conducted in a multi-ion solution (7 metal ions coexist) at pH 6.0, Fe₃O₄@SiO₂@CS-P exhibited an excellent selectively for capturing lead with the distribution coefficient (0.75 L g^-1) more ten times than other metal, while Fe₃O₄@SiO₂@CS demonstrated a highly selective adsorption of silver. These implied that phosphorylation of adsorbent not only improves the sorption performance of lead, but also changes the selective adsorption of metal types. Acidity experiments can draw conclusions that Fe₃O₄@SiO₂@CS-P exhibited better acid resistance (with barely any iron leaching) than silica-uncoated adsorbent (Fe₃O₄@CS-P) at pH 1.0. Furthermore, the FTIR and XPS spectra after adsorption suggested that the high adsorption performance and selective capture lead were predominantly controlled by the coordination of the phosphate groups on the surface of the adsorbent. This work shows a broad prospect of developing a series of novel, acid-resistant, good reusable and rapidly separable magnetic materials that can be used to efficiently and selectively capture lead from aqueous solutions.

Diversity, structure and regulation of microbial metallothionein: metal resistance and possible applications in sequestration of toxic metals

Metallothioneins (MTs) are a group of cysteine-rich, universal, low molecular weight proteins distributed widely in almost all major taxonomic groups ranging from tiny microbes to highly organized vertebrates. The primary function of this protein is storage, transportation and binding of metals, which enable microorganisms to detoxify heavy metals. In the microbial world, these peptides were first identified in a cyanobacterium Synechococcus as the SmtA protein which exhibits high affinity towards rising level of zinc and cadmium to preserve metal homeostasis in a cell. In yeast, MTs aid in reserving copper and confer protection against copper toxicity by chelating excess copper ions in a cell. Two MTs, CUP1 and Crs5, originating from Saccharomyces cerevisiae predominantly bind to copper though are capable of binding with zinc and cadmium ions. MT superfamily 7 is found in ciliated protozoa which show high affinity towards copper and cadmium. Several tools and techniques, such as western blot, capillary electrophoresis, inductively coupled plasma, atomic emission spectroscopy and high performance liquid chromatography, have been extensively utilized for the detection and quantification of microbial MTs which are utilized for the efficient remediation and sequestration of heavy metals from a contaminated environment.

Biological Route to Fabricate Silica on Cellulose Using Immobilized Silicatein Fused with a Carbohydrate-Binding Module

Silicatein is an enzyme capable of catalyzing silica formation under mild conditions and is a promising catalyst for the fabrication of biohybrid materials. However, unfavorable aggregation of silicatein makes it unsuitable for use in material fabrication. In this study, a soluble protein tag (ProS2) and a carbohydrate-binding module (CBM) were used to develop a soluble and cellulose-binding fusion silicatein, ProS2-Sil-CBM, which can be efficiently immobilized on cellulose to form silica on it. ProS2-Sil-CBM was soluble in aqueous media and strongly bound to cellulose. ProS2-Sil-CBM bound on cellulose catalyzed the formation of a silica layer on the cellulose in the presence of tetraethyl orthosilicate as the substrate. Scanning electron microscopy (SEM) and surface elemental analysis confirmed the formation of silica on cellulose. This technique can be used to fabricate inorganic-organic hybrid materials to immobilize biomolecules and can be applied to develop novel biocatalytic systems, biosensors, and tissue culture scaffolds.

Microalgal Metallothioneins and Phytochelatins and Their Potential Use in Bioremediation

The persistence of heavy metals (HMs) in the environment causes adverse effects to all living organisms; HMs accumulate along the food chain affecting different levels of biological organizations, from cells to tissues. HMs enter cells through transporter proteins and can bind to enzymes and nucleic acids interfering with their functioning. Strategies used by microalgae to minimize HM toxicity include the biosynthesis of metal-binding peptides that chelate metal cations inhibiting their activity. Metal-binding peptides include genetically encoded metallothioneins (MTs) and enzymatically produced phytochelatins (PCs). A number of techniques, including genetic engineering, focus on increasing the biosynthesis of MTs and PCs in microalgae. The present review reports the current knowledge on microalgal MTs and PCs and describes the state of art of their use for HM bioremediation and other putative biotechnological applications, also emphasizing on techniques aimed at increasing the cellular concentrations of MTs and PCs. In spite of the broad metabolic and chemical diversity of microalgae that are currently receiving increasing attention by biotechnological research, knowledge on MTs and PCs from these organisms is still limited to date.