Sulfonamide antibiotics sorption by high silica ZSM-5: Effect of pH and humic monomers (vanillin and caffeic acid)

Toltrazuril alkalizer-modifying solid dispersions against Toxoplasma gondii: A pharmacotechnical strategy to improve the efficacy of the drug

Toxoplasma gondii is a zoonotic protozoan that can parasitize nucleated cells of all warm-blooded animals, and seriously harm human and livestock. Toltrazuril (TOL) has insecticidal activity against parasites of the phylum Apicomplexan at multiple development stages, but the clinical application is limited by its poor water solubility. To improve the dissolution of TOL, nine ternary solid dispersions (SD) were prepared with PEG6000 as the carrier and various alkalizers as the pH modifier. Compared with the binary SD, all ternary SDs had improved TOL dissolution although dissolution rates differed. The complete dissolution was achieved for the Ca(OH)2-SD, associated with a gradual release of the alkalizer and adequate pH regulation of the microenvironment. DSC, PXRD and FTIR analyses indicated that TOL in the Ca(OH)2-SD was present in an amorphous form and had a strong hydrogen bond with Ca(OH)2. Within the drug concentration of 100 μg/mL, Ca(OH)2-SD was proved to have no damage to host cells by in vitro cytotoxicity analysis, and its anti-T. gondii efficacy was significantly higher than that of TOL and binary SD. The in vivo efficacy of Ca(OH)2-SD against T. gondii in mice further confirmed that Ca(OH)2-SD could be used as a new strategy to prevent T. gondii from killing mice and treat toxoplasmosis. In conclusion, Ca(OH)2-SD is expected to eventually turn into a clinical candidate for toxoplasmosis treatment in the future.

Competitive adsorption mechanisms of pigments in sugarcane juice on starch-based magnetic nanocomposites

The pigments in sugarcane result the crystallised sucrose appears unsatisfactorily yellow. In this study, cationic tapioca starch (CTS)-functionalized magnetic nanoparticles (CTS@Fe₃O₄) were synthesized and used as adsorbents for the removal of undesirable pigments. The adsorption properties of CTS@Fe₃O₄ were investigated by a sugarcane juice colorant model consisting of caffeic acid (CA), gallic acid (GA) and melanoidin (ME). The equilibrium adsorption capacities of CTS@Fe₃O₄ for CA, GA, and ME were 185, 160 and 580 mg g^-1 at the optimal conditions (60, 60 and 180 mg L^-1 initial concentrations, respectively; 0.3 mg mL^-1 CTS@Fe₃O₄ dosage, 313 K temperature, and pH value of 7). The adsorption process was described well by second-order kinetic and Langmuir isotherm models with a high fitting correlation coefficient approaching 1, suggesting that the pigments formed a surface monolayer with a homogenously distributed adsorption energy and was mainly dominated by chemisorption. The thermodynamic parameters (Gibbs free energy <0, enthalpy >0, and entropy >0) revealed that the adsorption process was endothermic and spontaneous. For the binary system, the competitive adsorption between pigments was primarily antagonistic. The speed of adsorption was the main factor affecting competitive adsorption, and the additional adsorption force reduced the effects of coexisting adsorbates.

Competitive adsorption analysis of antibiotics removal from multi-component systems using chemically activated spent tea waste: effect of operational parameters, kinetics, and equilibrium study

In this study, spent tea powder waste was chemically treated for the synthesis of adsorbent using two activating agents, i.e., sulfuric acid and phosphoric acid, to obtain sulfuric acid activated carbon (SAC) and phosphoric acid activated carbon (PAC). The performance of PAC and SAC for the sorption of tetracycline (TCY) and sulfadiazine (SDZ) antibiotics from mono-component (SDZ/TCY) and multi-component (SDZ + TCY) adsorption systems was investigated. Synergistic and antagonistic effects were studied in removing target pollutants in SDZ + TCY systems. Kinetic and equilibrium studies were modeled by different kinetic and isotherm models. The adsorption capacity was assessed using Langmuir's competitive model in a [Formula: see text]. Pseudo-first-order kinetic and Langmuir isotherm models best fit the experimental kinetic and equilibrium data to remove antibiotics. The Langmuir's maximum adsorption capacity (q_m) of PAC for the removal of SDZ and TCY in a [Formula: see text] was found to be 16.75 and 10.87 mg/g, and q_m of SAC for the removal of SDZ and TCY was found to be 24.69 and 23.20 mg/g, respectively. In SDZ + TCY multi-component system, adsorption of TCY was synergistic in nature for both PAC and SAC. Sorption of SDZ displayed an antagonistic effect in the SDZ + TCY system for both SAC and PAC. In conclusion, the activated carbons synthesized from spent tea waste could be effectively adopted for the simultaneous adsorption of SDZ and TCY from multi-component systems.

A review of the influence of soil minerals and organic matter on the migration and transformation of sulfonamides

Sulfonamides (SAs) are common antibiotics that are widely present in the environment and can easily migrate in the environment, so they pose an environmental risk. Minerals and organic matter influence the antibiotic migration and transformation in sewage treatment plants, activated sludge, surface water, and soil environment. In the present paper, the influence of the process and mechanism of minerals and organic matter on the adsorption, degradation, and plant uptake of SAs in soil were summarized. In the impact process of mineral and organic matter on the SAs migration and transformation, the pH value is undoubtedly the most important factor because it determines the ionic state of SAs. In terms of influence mechanisms, the minerals absorb SAs well via cation exchange, complexation, H-bonding, and cation bridging. Mineral photodegradation is also one of the primary removal methods for SAs. Soil organic matter (SOM) can significantly increase the SAs adsorption. The adsorption forces of SAs and SOM or dissolved organic matter (DOM) were very similar, but SOM decreased SAs mobility in the environment, while DOM increased SAs availability. DOM generated active substances and aided in the photodegradation of SAs. This review describes the effects of minerals and organic matter on the fate of SAs in soil, which is useful in controlling the migration and transformation of SAs in the soil environment.

Removal of pharmaceutical and personal care products (PPCPs) by MOF-derived carbons: A review

Nowadays, the increasing demand for pharmaceuticals and personal care products (PPCPs) has resulted in the uncontrolled release of large amounts of PPCPs into the environment, which poses a great challenge to the existing wastewater treatment technologies. Therefore, novel materials for efficient treatment of PPCPs need to be developed urgently. MOF-derived carbons (MDCs), have many advantages such as high mechanical strength, excellent water stability, large specific surface area, excellent electron transfer capability, and environmental friendliness. These advantages give MDCs an excellent ability to remove PPCPs. In this review, the effects of different substances on the properties and functions of MDCs are discussed. In addition, representative applications of MDCs and composites for the removal of PPCPs in the field of adsorption and catalysis are summarized. Finally, the future challenges of MDCs and composites are foreseen.

Adsorptive removal of pharmaceutically active compounds from multicomponent system using Azadirachta indica induced zinc oxide nanoparticles: analysis of competitive and cooperative adsorption

In this research, zinc oxide (ZnO) nanoparticles synthesized using neem leaf (Azadirachta indica) extract were used as an adsorbent for removing two widely used pharmaceutical compounds acetaminophen (AMP) and sulfadiazine (SDZ). The synthesized ZnO nanoparticles were characterized using SEM-EDS, FTIR, TEM, BET, and XRD analysis. The synthesized ZnO nanoparticles were found to be in the size range of 10 nm with a surface area of 48.551 m²/g. The adsorptive performance of ZnO nanoparticles in both mono-component (MoS) and multi-component system (MuS) was investigated under various operational parameters viz. contact time, temperature, pH, concentration of pharmaceutical compound and ZnO nanoparticles dose. It was observed that the maximum adsorption capacity of ZnO nanoparticles was 7.87 mg/g and 7.77 mg/g for AMP and SDZ, respectively, under the optimum conditions of 7 pH and 2 g/L adsorbent dosage. The experimental data best-fitted with the pseudo-second-order model and Langmuir model, indicating monolayer chemisorption. Further investigation on removal of AMP and SDZ from multicomponent system was modelled using a Langmuir competitive model. The desorption study has shown 25.28% and 22.4% removal of AMP and SDZ from the surface of ZnO nanoparticles. In general, green synthesized ZnO nanoparticles can be utilized effectively as adsorbent for removal of pharmaceutically active compounds from wastewater.

Adsorption kinetics of 20 glucocorticoids at environmentally relevant concentrations in wastewater by powdered activated carbons and development of surrogate models

Glucocorticoids (GCs) are widely used in the treatment of the coronavirus disease of 2019 (COVID-19), and the toxicity of GCs to aquatic organisms has aroused widespread concern. Powdered activated carbon (PAC) has proven effective in removing various trace organic pollutants. In this study, the adsorption behaviors of 20 typical GCs onto PACs were investigated at environmentally relevant concentrations (ng/L) in real wastewater, using four commercially available PACs (HDB, WPH, 20BF, PWA). The results showed that PAC adsorption was feasible for GC removal at ng/L concentrations. After adsorption for 60 min, the GC removal efficiencies obtained by HDB, WPH, 20BF, and PWA were 90-98 %, 89-97 %, 84-96 %, and 71-90 %, respectively. The adsorption processes of 20 GCs on PACs were well fitted by the pseudo-second-order kinetics model (with R ² >0.98). Among the four PACs, HDB achieved the highest rates because of the electrostatic attraction between HDB (positively charged) and the complex of GCs and natural organic matter (GC-NOM, negatively charged). Among the 20 GCs, compounds with substitutions of halogen atoms or five-membered rings at C-17 achieved higher adsorption rates because of the enhanced formation of hydrogen bonds and a resulting increase in electron density. In addition, surrogate models with total fluorescence (TF) and ultraviolet absorbance at 254 nm (UV₂₅₄) were developed to monitor the attenuation trend of GCs during adsorption processes. Compared with the UV₂₅₄ model, the TF model showed better sensitivity to GC monitoring, which could greatly simplify the water quality monitoring process and facilitate online monitoring of GCs in water.

Adsorption of levofloxacin on natural zeolite: effects of ammonia nitrogen and humic acid

The persistence of antibiotics in sewage treatment plants in recent years has become a serious problem. Meanwhile, humic acid and ammonia nitrogen are widely distributed in natural reservoirs and might influence the sorption, migration and transformation of antibiotics. In this study, natural zeolite (NZ) was evaluated as an adsorbent for the removal of levofloxacin (LEV). The physical and chemical properties of NZ before and after adsorption were characterized by various analytical techniques to develop the mechanism. The effects of ammonia nitrogen and humic acid (HA) on the interfacial behavior of LEV on NZ were explored. Comparative experiments revealed that LEV adsorption on NZ involved electrostatic interactions and ion exchange, and the adsorption processes were well fitted by the Langmuir isotherm model and pseudosecond-order kinetic model. The maximum experimental adsorption capacity of LEV was 22.17 mg·g^-1 at pH 6.5. The presence of ammonia nitrogen and HA significantly suppressed the adsorption of LEV due to competitive adsorption, and the adsorption capacity decreased 58 and 46%, respectively. It is obvious that low concentrations of ammonia nitrogen and HA are conducive to improving the treatment effect of sewage. This study demonstrates that NZ is a promising and efficient material for LEV adsorption.