Performance evaluation of a biotrickling filter for the removal of gas-phase 1,2-dichlorobenzene: Influence of rhamnolipid and ferric ions

Microbe cultivation guidelines to optimize rhamnolipid applications

In the growing landscape of interest in natural surfactants, selecting the appropriate one for specific applications remains challenging. The extensive, yet often unsystematized, knowledge of microbial surfactants, predominantly represented by rhamnolipids (RLs), typically does not translate beyond the conditions presented in scientific publications. This limitation stems from the numerous variables and their interdependencies that characterize microbial surfactant production. We hypothesized that a computational recipe for biosynthesizing RLs with targeted applicational properties could be developed from existing literature and experimental data. We amassed literature data on RL biosynthesis and micellar solubilization and augmented it with our experimental results on the solubilization of triglycerides (TGs), a topic underrepresented in current literature. Utilizing this data, we constructed mathematical models that can predict RL characteristics and solubilization efficiency, represented as logPRL = f(carbon and nitrogen source, parameters of biosynthesis) and logMSR = f(solubilizate, rhamnolipid (e.g. logPRL), parameters of solubilization), respectively. The models, characterized by robust R2 values of respectively 0.581-0.997 and 0.804, enabled the ranking of descriptors based on their significance and impact-positive or negative-on the predicted values. These models have been translated into ready-to-use calculators, tools designed to streamline the selection process for identifying a biosurfactant optimally suited for intended applications.

Microbial co-culture mediated by intercellular nanotubes during DMAC degradation: Microbial interaction, communication mode, and degradation mechanism

Microbial co-culture has been proven as an effective technique for environmental remediation. In this study, co-culture mechanism of Rhodococcus ruber HJM-8 and Paracoccus communis YBH-X during N,N-dimethylacetamide (DMAC) degradation was studied. The comparison of degradation performance in monoculture and co-culture was presented; due to the efficient cooperation between the two strains via parallel and cascaded degradation, the removal efficiency of total nitrogen (TN) in co-culture could reach 90.1%, which was 1.35 and 1.21 times higher than that of HJM-8 and YBH-X, respectively. Then the communication mode of co-culture during DMAC degradation was determined as contact-independent and contact-dependent interactions between microorganisms. Meanwhile, intercellular nanotube between HJM-8 and YBH-X was found as a unique contact-dependent interaction. The cell staining experiments and RNA sequencing analyses revealed that the nanotube could be used as a bridge to exchange cytoplasmic molecules, and thus improved material transfer and enhanced cell connection in co-culture. The results of KEGG pathway showed that differentially expressed genes in co-culture have an association with cell metabolism, nanotube generation, and genetic material transfer. Furthermore, a mechanism diagram of DMAC biodegradation was proposed for co-culture, indicating that bidirectional cooperation was established between HJM-8 and YBH-X which was mediated by the conversions of acetate and nitrogen. Finally, the co-culture system was validated for treatment of an actual wastewater; results indicated that removal efficiencies of 100% and 68.2% were achieved for DMAC and TN, respectively, suggesting that co-culture had the potential for application.

Performance evaluation of H2S and NH3 removal by biological trickling filter reactors with various fillers under heterotrophic conditions

A pilot-scale biological trickling filter (BTF) reactor (13.5 L) packed with different fillers (Pine bark, Cinder, Straw, and MBBR (mobile bed biofilm reactor) filler was employed to evaluate their removal performance of H2S and NH3 after heterotrophic bacterium addition, and some parameters, including different packing heights, empty bed residence time (EBRT), inlet titers, loading ratios, and restart trial, were investigated in this study. According to the experimental results, BTF filled with pine bark exhibited better removal efficiency than other reactors under a variety of conditions. The removal efficiency of H2S and NH3 reached to as high as 81.31 % and 91.72 %, respectively, with the loading range of 3.29-67.70 g/m3·h. Moreover, due to the addition of heterotrophic bacterium, the removal efficiency was enhanced and capable to eliminate majority of H2S and NH3 even though the packing height was reduced to 400 mm. After 15 days of idle, the BTF reactor was able to resume rapidly and execute deodorization with high efficiency. The degradation mechanism was further explored by a thorough examination of microbial species which degraded contaminants, as well as by functional prediction and correlation analyses. In a word, these results laid a foundation for the application of heterotrophic microorganisms in BTF, which could improve the removal efficiency of biological deodorization.

Effect of rhamnolipids on the biodegradation of m-dichlorobenzene in biotrickling filters: Performance and mechanism

In this study, the effect of rhamnolipids (RL) on m-dichlorobenzene (m-DCB) removal and biofilm was investigated in two biotrickling filters (BTF) (BTF1: blank control; BTF2: RL addition). The critical micelle concentration (CMC) value of RL was 75.6 mg L^-1, and the RL could significantly improve the solubilization of m-DCB. The results showed that the optimal concentration of RL was 180 mg L^-1. The removal efficiency (RE) of m-DCB dropped by 42.4% for BTF1 no fed with RL and only 28.2% for BTF2 fed with RL when the inlet concentration increased from 200 to 1400 mg m^-3 at an empty bed time (EBRT) of 60 s. RL increased the secretion of extracellular polymers (EPS) and the ratio of Protein/Polysaccharide, which improved the mass transfer of m-DCB to the biofilm. RL also had a facilitating effect on catechol-1,2-dioxygenase (C₁₂O) enzyme activity. Furthermore, RL increased Zeta potential and facilitated microorganisms to form biofilm. The dominant microorganisms of microbial community were increased and the application of RL promoted the enrichment of them.

Effect of rhamnolipids on the fungal elimination of toluene vapor in a biotrickling filter under stressed operational conditions

The application of rhamnolipids in a fungal-cultured biotrickling filter (BTF) has a significant impact on toluene removal. Two BTFs were used; BTF-A, a control bed, and BTF-B fed with rhamnolipids. The effect of empty bed residence times (EBRTs) on toluene bioavailability was investigated. Removal of toluene was carried out at EBRTs of 30 and 60 s and inlet loading rates (LRs) of 23-184 g m^-3 h^-1. At 30 s EBRT, when inlet LR was increased from 23 to 184 g m^-3 h^-1, the removal efficiency (RE) decreased from 93% to 50% for the control bed, and from 94% to 87% for BTF-B. Increasing the EBRT simultaneously with inlet LRs, confirms that BTF-A was diffusion-limited by registering a RE of 62% for toluene inlet LR of 184 g m^-3 h^-1, whereas BTF-B, achieved RE > 96%, confirming a significant improvement in toluene biodegradability. Overall, the best performance was observed at 60 s EBRT and inlet LR of 184 g m^-3 h^-1, providing a maximum elimination capacity (EC) of 176.8 g m^-3 h^-1 under steady-state conditions. While a maximum EC of 114 g m^-3 h^-1 was observed under the same conditions in the absence of rhamnolipids (BTF-A). Measurements of critical micelle concentration showed that 150 mg L^-1 of rhamnolipids demonstrated the lowest aqueous surface tension and maximum formation of micelles, while 175 mg L^-1 was the optimum dose for fungal growth. Production rate of carbon dioxide, and dissolved oxygen contents highlighted the positive influence of rhamnolipids on adhesive forces, improved toluene mineralization, and promotion of microbial motility over mobility.

Analyses of deodorization performance of mixotrophic biotrickling filter reactor using different industrial and agricultural wastes as packing material

In this study, to efficiently remove malodorous gas and reduce secondary pollution under mixotrophic conditions, pine bark, coal cinder, straw and mobile bed biofilm reactor (MBBR) fillers were used as packing materials in a biological trickling filter (BTF) to simultaneously treat high-concentration H₂S and NH₃. The results showed that the removal rate of BTF-A filled with pine bark was the highest, which was 86.31% and 94.06% under the H₂S and NH₃ loading rates of 53.59 g/m³·h while the empty bed residence time (EBRT) was 40.5 s. The theoretical maximum load was obtained by fitting the kinetic curve, and the value were 90.09 g H₂S m^-³·h^-1 and 172.41 g NH₃ m^-³·h^-1. Meanwhile, after treating with 720 ppm of NH₃, the average concentration of NO₃^- in the BTF circulating fluid was only 127.58 mg/L, indicating the better performance of secondary pollutants control. Microbiological analysis showed that Dokdonella, Micropruina, Candidatus_Alysiosphaera, Nakamurella and Thiobacillus possessed high abundance at the genus level, and their entire percentage in four BTF reactors were 62.87%, 46.32%, 47.98%, and 57.35% respectively. It is worthwhile that the genera Comamonas and Trichococcus with heterotrophic nitrification and aerobic denitrification capabilities and proportion of 3.66%, 1.45%, 5.43%, and 3.23% were observed in four reactors.

Effect of surfactin on removal of semi-volatile organic compound: Emphasis on enhanced biofiltration performance

The performance of a lab-scale biotrickling filter (BTF) inoculated with a mixed fungal consortium was investigated for the simultaneous abatement of 2-ethylhexanol; a hydrophobic semi-volatile organic compound (SVOC), and propylene glycol monomethyl ether (PGME). The BTF performance was investigated in the presence of lipopeptide-type biosurfactant, surfactin. The effect of surfactin on the removal efficiency and elimination capacity was examined at stretched inlet loading rates (LR): 1.04 to 15.7 and 3.2-48 g m^-3 h^-1 of PGME and 2-ethylhexanol, respectively. Seeding the BTF with 50 mg L^-1 of surfactin maintained high and consistent removal efficiencies of PGME and 2-ethylhexanol up to LRs of 15.7 and 32 g m^-3 h^-1, with removal efficiencies of 98.5 and 99%, respectively. Once the LR of 2-ethylhexanol increased to 48 g m^-3 h^-1, a substrate inhibition was observed, accompanied by a sudden decrease in removal efficiency from 99.2 to 62.3%. At the same LR, the BTF performance was improved by reseeding 100 mg L^-1 of surfactin, hence, reinstated the removal efficiency of 2-ethylhexanol to 92.7% and achieving a maximum elimination capacity of 44.5 g m^-3 h^-1. This enhanced SVOC uptake rate was further confirmed by a considerable increase in reaction rate constant from 0.005 to 0.017 s^-1. A batch study was also conducted at the end of the experimental run to better understand the correlation between surfactin concentrations and the time-dependent partition coefficient of 2-ethylhexanol. Biofilm microbial community structure revealed relative abundancy of 72 and 28% of Trichoderma asperellum and Fusarium solani, respectively. The findings of this study show for the first time that the removal of a semi-VOC such as 2-ethylhexanol is feasible in the presence of surfactin and hence improving the bioavailability of hydrophobic semi-VOC.