A facile strategy for photocatalytic degradation of seven neonicotinoids over sulfur and oxygen co-doped carbon nitride

Preparation of La-doped Ti/SnO2-Sb2O4 anode and its electrochemical oxidation performance of rhodamine B

In this paper, La-doped Ti/SnO2-Sb2O4 electrode was prepared by electrodeposition and used for electrochemical degradation of rhodamine B. The optimum preparation conditions of the electrode were optimized as deposition time of 15 min and calcination at 500 ℃ for 2 h. The water treatment conditions were selected as initial pH 3.0, electrolyte Na2SO4 concentration 0.1 M, current density 30 mA cm-2, and initial rhodamine B concentration 20 mg L-1; the color and TOC removal of RhB reached 99.78% and 82.41% within 30 min. The FESEM, XRD, XPS, CV, LSV, and EIS characterization studies demonstrated that Ti/SnO2-Sb2O4-1%La electrode had a dense structure and the highest oxygen evolution potential (2.14 V) and lowest charge transfer resistance (0.198 Ω cm-2), indicating that doped La has lower energy consumption. Moreover, La doping can expand the specific surface area, active site, performance of pollutant degradation, and service life of the electrode. Especially, the service life of Ti/SnO2-Sb2O4-1%La is increased by three times, and the maximum life span reaches 90 min (1000 mA cm-2, 1 M H2SO4). Free radical quenching experiments show that ·OH plays a major role in the degradation of RhB. The Ti/SnO2-Sb2O4-1%La electrode prepared in this paper and its results will provide data support and reference for the design of efficient electrocatalytic electrode.

Ecotoxicological impact of dinotefuran insecticide and its metabolites on non-targets in agroecosystem: Harnessing nanotechnology- and bio-based management strategies to reduce its impact on non-target ecosystems

The class of insecticides known as neonicotinoid insecticides has gained extensive application worldwide. Two characteristics of neonicotinoid pesticides are excellent insecticidal activity and a wide insecticidal spectrum for problematic insects. Neonicotinoid pesticides can also successfully manage pest insects that have developed resistance to other insecticide classes. Due to its powerful insecticidal properties and rapid plant absorption and translocation, dinotefuran, the most recent generation of neonicotinoid insecticides, has been widely used against biting and sucking insects. Dinotefuran has a wide range of potential applications and is often used globally. However, there is growing evidence that they negatively impact the biodiversity of organisms in agricultural settings as well as non-target organisms. The objective of this review is to present an updated summary of current understanding regarding the non-target effects of dinotefuran; we also enumerated nano- and bio-based mitigation and management strategies to reduce the impact of dinotefuran on non-target organisms and to pinpoint knowledge gaps. Finally, future study directions are suggested based on the limitations of the existing studies, with the goal of providing a scientific basis for risk assessment and the prudent use of these insecticides.

Remediation technologies for neonicotinoids in contaminated environments: Current state and future prospects

Neonicotinoids (NEOs) are synthetic insecticides with broad-spectrum insecticidal activity and outstanding efficacy. However, their extensive use and persistence in the environment have resulted in the accumulation and biomagnification of NEOs, posing significant risks to non-target organisms and humans. This review provides a summary of research history, advancements, and highlighted topics in NEOs remediation technologies and mechanisms. Various remediation approaches have been developed, including physiochemical, microbial, and phytoremediation, with microbial and physicochemical remediation being the most extensively studied. Recent advances in physiochemical remediation have led to the development of innovative adsorbents, photocatalysts, and optimized treatment processes. High-efficiency degrading strains with well-characterized metabolic pathways have been successfully isolated and cultured for microbial remediation, while many plant species have shown great potential for phytoremediation. However, significant challenges and gaps remain in this field. Future research should prioritize isolating, domesticating or engineering high efficiency, broad-spectrum microbial strains for NEO degradation, as well as developing synergistic remediation techniques to enhance removal efficiency on multiple NEOs with varying concentrations in different environmental media. Furthermore, a shift from pipe-end treatment to pollution prevention strategies is needed, including the development of green and economically efficient alternatives such as biological insecticides. Integrated remediation technologies and case-specific strategies that can be applied to practical remediation projects need to be developed, along with clarifying NEO degradation mechanisms to improve remediation efficiency. The successful implementation of these strategies will help reduce the negative impact of NEOs on the environment and human health.

Synthesizing Ag2Ox(3 wt%)-loaded ZnFe2O4 photocatalysts for efficiently saving polluted aquatic ecosystems

Herein, we report an Ag2Ox (3 wt%)-loaded ZnFe2O4 photocatalysts synthesized by co-precipitation and incipient wet impregnation approach for acetamiprid degradation, antibacterial, antioxidant, and toxicity assay. Initially, bare ZnFe2O4 nanostructures were made through a simple co-precipitation method. In the second step, 3 wt% of various transition metal oxides (CuOx, ZrOx, and Ag2Ox) were embedded on the surface of ZnFe2O4 photocatalysts via a wet impregnation method. Further, the prepared photocatalysts were systematically characterized using XRD, FTIR, FE-SEM, BET, HRTEM, and XPS analysis. The optimum Ag2Ox (3 wt%)-loaded ZnFe2O4 photocatalysts revealed higher degradation efficiencies for acetamiprid under sunlight irradiation. Additionally, the Ag2Ox (3 wt%)-loaded ZnFe2O4 photocatalysts showed more effective antioxidant and antibacterial activity than blank and bare ZnFe2O4 nanomaterials. The enriched catalytic efficiency can be accredited to the 3 wt% of Ag2Ox NPs loaded on ZnFe2O4 nanomaterials, possibly due to the boosted transport properties of the electron-hole pairs. This study will provide a new avenue for the development of simple and effective photocatalysts for efficiently saving polluted aquatic ecosystems.

Recent Advances of Doping and Surface Modifying Carbon Nitride with Characterization Techniques

As a non-metallic organic semiconductor photocatalyst, graphitic carbon nitride (g–C3N4, CN) has become a research hotspot due to its excellent performance in organic degradation, CO2 reduction and water splitting to produce hydrogen. However, the high recombination rate of electron-hole pairs, low specific surface area and weak light absorption of bulk CN synthesized by the traditional one-step thermal polymerization method seriously restrict its photocatalytic performance and practical application. To enhance the photocatalytic performance of CN, doping and surface modification strategies are usually employed to tune the band gap of carbon nitride and improve the separation of carriers. In this paper, the research progress of different methods to modify CN in recent years is introduced, and the mechanisms of improving the photocatalytic performance are mainly analyzed. Typical modification methods are mainly divided into metal doping, non-metal doping, co-doping and surface-functionalized modification. Some characterization methods that can analyze the doping state and surface modification are also discussed as examples. Finally, the difficulties that need to be addressed through modified CN photocatalysts and the directions for future research are pointed out.

Highly crystalline sulfur and oxygen co-doped g-C3N4 nanosheets as an advanced photocatalyst for efficient hydrogen generation

Heteroatom doping has become a promising strategy to tailor the band structure and physicochemical properties of graphitic carbon nitride (g-C3N4). However, doping heteroatoms usually lead to decreased crystallinity, thereby an...

Degradation of Neonicotinoids and Caffeine from Surface Water by Photolysis

Along with rapid social development, the use of insecticides and caffeine-containing products increases, a trend that is also reflected in the composition of surface waters. This study is focused on the phototreatment of a surface water containing three neonicotinoids (imidacloprid, thiamethoxam, and clothianidin) and caffeine. Firstly, the radiation absorption of the target pollutants and the effect of the water matrix components were evaluated. It was observed that the maximum absorption peaks appear at wavelengths ranging from 246 to 274 nm, and that the water matrix did not affect the efficiency of the removal of the target pollutants. It was found that the insecticides were efficiently removed after a very short exposure to UV irradiation, while the addition of hydrogen peroxide was needed for an efficient caffeine depletion. The electrical energy per order was estimated, being the lowest energy required (9.5 kWh m⁻³ order⁻¹) for the depletion of thiamethoxan by indirect photolysis, and a concentration of hydrogen peroxide of 5 mg dm⁻³. Finally, a preliminary evaluation on the formation of by-products reveals that these compounds play a key role in the evolution of the ecotoxicity of the samples, and that the application of direct photolysis reduces the concentration of these intermediates.

Visible light driven photocatalytic degradation of aqueous acetamiprid over nitrogen and graphene oxide doped ZnO composites

The present investigation focused on the photocatalytic degradation of acetamiprid in aqueous solutions under visible light over bare ZnO as well as N- and N-GO-doped photocatalysts. The synthesised materials were characterised using SEM, TEM, XRD, nitrogen sorption, photoluminescence, UV-Vis, FTIR and electrochemical impedance spectroscopy techniques. The obtained results pointed out the high photocatalytic performances of the N-GO-ZnO allowing complete degradation of the acetamiprid after 5 hours of reaction at ambient temperature. Under otherwise the same operating conditions, 12, 38 and 68% conversion were reached in the absence of any photocatalyst, over the bare ZnO and N-doped ZnO materials, respectively.

Data mining for pesticide decontamination using heterogeneous photocatalytic processes

Pesticides are chemical compounds used to kill pests and weeds. Due to their nature, pesticides are potentially toxic to many organisms, including humans. Among the various methods used to decontaminate pesticides from the environment, the heterogeneous photocatalytic process is one of the most effective approaches. This study focuses on artificial intelligence (AI) techniques used to generate optimum predictive models for pesticide decontamination processes using heterogeneous photocatalytic processes. In the present study, 537 valid cases from 45 articles from January 2000 to April 2020 were filtered based on their content collected and analyzed. Based on cross-industry standard process (CRISP) methodology, a set of four classifiers were applied: Decision Trees (DT), Bayesian Network (BN), Support Vector Machines (SVM), and Feed Forward Multilayer Perceptron Neural Networks (MLP). To compare the accuracy of the selected algorithms, accuracy, and sensitivity criteria were applied. After the final analysis, the DT classification algorithm with seven factors of prediction, the accuracy of 91.06%, and sensitivity of 80.32% was selected as the optimal predictor model.

Preparation and electrochemical treatment application of Ti/Sb-SnO2-Eu&rGO electrode in the degradation of clothianidin wastewater

This work investigated the preparation of Ti/Sb-SnO₂ electrode co-doped with graphene and europium and the electrochemical degradation of clothianidin in aqueous solution with Ti/Sb-SnO₂-Eu&rGO electrode. The physicochemical properties of different electrodes were characterized by using the scanning electron microscopy, X-ray diffraction, oxygen evolution potential and cyclic voltammetry tests. The results indicated that the Ti/Sb-SnO₂-Eu&rGO electrodes have a compact structure and fine grain size and have a higher oxygen evolution overpotential than Ti/Sb-SnO₂-None, Ti/Sb-SnO₂-Eu and Ti/Sb-SnO₂-rGO electrodes. Among the four electrodes, the Ti/Sb-SnO₂-Eu&rGO electrode showed the highest efficiency and was chosen as the experimental electrode. The main influence factors on the degradation of clothianidin, such as initial pH, electrolyte concentration, current density and initial concentration of clothianidin, were analyzed. The results showed that the removal rate of clothianidin can reach 96.44% under the optimal conditions for 120 min treatment. Moreover, a possible degradation pathway including the fracture of internal bonds of clothianidin such as the N-N bond, the C-N bond that connects nitroguanidine to the thiazole ring and mineralization was elucidated by intermediate products identified by HPLC-MS method and Fourier transform infrared spectroscopy (FTIR). This paper introduces the Ti/Sb-SnO₂-Eu&rGO electrode into an electrocatalytic degradation system and could provide basic data and technique support and guidance for the clothianidin wastewater pollution control.

Recent Strategies for Environmental Remediation of Organochlorine Pesticides

The amount of organochlorine pesticides in soil and water continues to increase; their presence has surpassed maximum acceptable concentrations. Thus, the development of different removal strategies has stimulated a new research drive in environmental remediation. Different techniques such as adsorption, bioremediation, phytoremediation and ozonation have been explored. These techniques aim at either degrading or removal of the organochlorine pesticides from the environment but have different drawbacks. Heterogeneous photocatalysis is a relatively new technique that has become popular due to its ability to completely degrade different toxic pollutants—instead of transferring them from one medium to another. The process is driven by a renewable energy source, and semiconductor nanomaterials are used to construct the light energy harvesting assemblies due to their rich surface states, large surface areas and different morphologies compared to their corresponding bulk materials. These make it a green alternative that is cost-effective for organochlorine pesticides degradation. This has also opened up new ways to utilize semiconductors and solar energy for environmental remediation. Herein, the focus of this review is on environmental remediation of organochlorine pesticides, the different techniques of their removal from the environment, the advantages and disadvantages of the different techniques and the use of specific semiconductors as photocatalysts.