Potentiality of living Bacillus pumilus SWU7-1 in biosorption of strontium radionuclide

Research progress on microbial adsorption of radioactive nuclides in deep geological environments

Due to the development and utilization of nuclear energy, the safe disposal of nuclear waste needs to be urgently addressed. In recent years, the utilization of microorganisms' adsorption capacity to dispose of radioactive waste has received increasing attention. When compared with conventional disposal methods, microbial adsorption exhibits the characteristics of high efficiency, low cost, and no secondary pollution. In the long term, microbial biomass shows significant promise as specific chemical-binding agents. Optimization of biosorption conditions, identification of rare earth element binding sites, and studies on the sorption capacities of immobilized cells provide compelling reasons to consider biosorption for industrial applications in heavy metal removal from solutions. However, the interaction mechanism between microorganisms and radioactive nuclides is very complex. This mini-review briefly provides an overview of the preparation methods, factors affecting the adsorption capacity, and the mechanisms of microbial adsorbents.

Recent trends in the phytoremediation of radionuclide contamination of soil by cesium and strontium: Sources, mechanisms and methods: A comprehensive review

This comprehensive review examines recent trends in phytoremediation strategies to address soil radionuclide contamination by cesium (Cs) and strontium (Sr). Radionuclide contamination, resulting from natural processes and nuclear-related activities such as accidents and the operation of nuclear facilities, poses significant risks to the environment and human health. Cs and Sr, prominent radionuclides involved in nuclear accidents, exhibit chemical properties that contribute to their toxicity, including easy uptake, high solubility, and long half-lives. Phytoremediation is emerging as a promising and environmentally friendly approach to mitigate radionuclide contamination by exploiting the ability of plants to extract toxic elements from soil and water. This review focuses specifically on the removal of 90Sr and 137Cs, addressing their health risks and environmental implications. Understanding the mechanisms governing plant uptake of radionuclides is critical and is influenced by factors such as plant species, soil texture, and physicochemical properties. Phytoremediation not only addresses immediate contamination challenges but also provides long-term benefits for ecosystem restoration and sustainable development. By improving soil health, biodiversity, and ecosystem resilience, phytoremediation is in line with global sustainability goals and environmental protection initiatives. This review aims to provide insights into effective strategies for mitigating environmental hazards associated with radionuclide contamination and to highlight the importance of phytoremediation in environmental remediation efforts.

Screening and performance optimization of fungi for heavy metal adsorption in electrolytes

The resource recovery and reuse of precious metal-laden wastewater is widely recognized as crucial for sustainable development. Superalloy electrolytes, produced through the electrolysis of superalloy scrap, contain significant quantities of precious metal ions, thereby possessing substantial potential for recovery value. This study first explores the feasibility of utilizing fungi to treat Superalloy electrolytes. Five fungi resistant to high concentrations of heavy metals in electrolytes (mainly containing Co, Cr, Mo, Re, and Ni) were screened from the soil of a mining area to evaluate their adsorption characteristics. All five fungi were identified by ITS sequencing, and among them, Paecilomyces lilacinus showed the best adsorption performance for the five heavy metals; therefore, we conducted further research on its adsorption characteristics. The best adsorption effect of Co, Cr, Mo, Re, and Ni was 37.09, 64.41, 47.87, 41.59, and 25.38%, respectively, under the conditions of pH 5, time 1 h, dosage 26.67 g/L, temperature 25-30°C, and an initial metal concentration that was diluted fivefold in the electrolyte. The biosorption of Co, Mo, Re, and Ni was better matched by the Langmuir model than by the Freundlich model, while Cr displayed the opposite pattern, showing that the adsorption process of P. lilacinus for the five heavy metals is not a single adsorption mechanism, but may involve a multi-step adsorption process. The kinetics study showed that the quasi-second-order model fitted better than the quasi-first-order model, indicating that chemical adsorption was the main adsorption process of the five heavy metals in P. lilacinus. Fourier transform infrared spectroscopy revealed that the relevant active groups, i.e., hydroxyl (-OH), amino (-NH2), amide (- CONH2), carbonyl (-C = O), carboxyl (-COOH), and phosphate (PO43-), participated in the adsorption process. This study emphasized the potential application of P. lilacinus in the treatment of industrial wastewater with extremely complex background values.

Isolation, characterization, identification, genomics and analyses of bioaccumulation and biosorption potential of two arsenic-resistant bacteria obtained from natural environments

Arsenic (As) is a significant contaminant whose unrestrained entrance into different ecosystems has created global concern. At the cellular level, As forms unsteady intermediates with genetic materials and perturbs different metabolic processes and proper folding of proteins. This study was the first in this region to explore, isolate, screen systematically, and intensively characterize potent As-tolerant bacterial strains from natural environments near Raiganj town of Uttar Dinajpur, West Bengal. In this study, two potent Gram-negative bacterial strains with high tolerance to the poisonous form of As, i.e., As(III) and As(V), were obtained. Both the isolates were identified using biochemical tests and 16S rRNA gene sequencing. These bacteria oxidized toxic As(III) into less poisonous As(V) and depicted tolerance towards other heavy metals. Comparative metabolic profiling of the isolates in control and As-exposed conditions through Fourier-transform infrared spectroscopy showed metabolic adjustments to cope with As toxicity. The metal removal efficiency of the isolates at different pH showed that one of the isolates, KG1D, could remove As efficiently irrespective of changes in the media pH. In contrast, the efficiency of metal removal by PF14 was largely pH-dependent. The cell mass of both the isolates was also found to favourably adsorb As(III). Whole genome sequence analysis of the isolates depicted the presence of the arsRBC genes of the arsenic operon conferring resistance to As. Owing to their As(III) oxidizing potential, high As bioaccumulation, and tolerance to other heavy metals, these bacteria could be used to bioremediate and reclaim As-contaminated sites.

New Process for the Sulfonation of Algal/PEI Biosorbent for Enhancing Sr(II) Removal from Aqueous Solutions-Application to Seawater

Sulfonic resins are highly efficient cation exchangers widely used for metal removal from aqueous solutions. Herein, a new sulfonation process is designed for the sulfonation of algal/PEI composite (A*PEI, by reaction with 2-propylene-1-sulfonic acid and hydroxylamine-O-sulfonic acid). The new sulfonated functionalized sorbent (SA*PEI) is successfully tested in batch systems for strontium recovery first in synthetic solutions before investigating with multi-component solutions and final validation with seawater samples. The chemical modification of A*PEI triples the sorption capacity for Sr(II) at pH 4 with a removal rate of up to 7% and 58% for A*PEI and SA*PEI, respectively (with SD: 0.67 g L^-1). FTIR shows the strong contribution of sulfonate groups for the functionalized sorbent (in addition to amine and carboxylic groups from the support). The sorption is endothermic (increase in sorption with temperature). The sulfonation improves thermal stability and slightly enhances textural properties. This may explain the fast kinetics (which are controlled by the pseudo-first-order rate equation). The sulfonated sorbent shows a remarkable preference for Sr(II) over competitor mono-, di-, and tri-valent metal cations. Sorption properties are weakly influenced by the excess of NaCl; this can explain the outstanding sorption properties in the treatment of seawater samples. In addition, the sulfonated sorbent shows excellent stability at recycling (for at least 5 cycles), with a loss in capacity of around 2.2%. These preliminary results show the remarkable efficiency of the sorbent for Sr(II) removal from complex solutions (this could open perspectives for the treatment of contaminated seawater samples).

Biosorption of metribuzin pesticide by Cucumber (Cucumis sativus) peels-zinc oxide nanoparticles composite

Herein, a biosorbent was prepared from cucumber peels modified with ZnO nanoparticles (CPZiONp-composite) for the biosorption of metribuzin. Characterization of the composite was accomplished using FTIR, SEM, EDX, surface area pore size analyzer and pH of point of zero charge (pH_pzc). Biosorption study was executed in batch concerning the impact of pH, composite dose, contact time, initial metribuzin concentration and temperature. The biosorption depends on pH and maximum biosorption was acquired at pH 3.0. Surface chemistry of the composite was studied by determining the pH_pzc and was found to be 6.1. The biosorption nature was investigated using isotherms and was assessed that Freundlich isotherm is well suited for the fitting of the biosorption data owing to the highest R². The maximum biosorption capacity of CPZiONp-composite was found to be 200 mg g^-1. The biosorption data were fitted in to different kinetic models and the outcomes suggesting that pseudo second order is a satisfactory model to interpret the biosorption data owing to the highest R². Thermodynamic parameters for instance entropy, enthalpy and Gibbs free energy were computed and revealed that biosorption of metribuzin onto CPZiONp-composite is spontaneous and exothermic process.

Chemically induced oxidative stress improved bacterial laccase-mediated degradation and detoxification of the synthetic dyes

To alleviate the risk of textile effluent, the development of highly effective bioremediation strategies for synthetic dye removal is needed. Herein, we aimed to assess whether intensified bioactivity of Bacillus pumilus ZB1 by oxidative stress could improve the removal of textile dyes. Methyl methanesulfonate (MMS) induced oxidative stress significantly promoted laccase expression of B. pumilus ZB1. Both the level of hydrogen dioxide and superoxide anion showed a significant positive correlation with laccase activity (RSQ = 0.963 and 0.916, respectively) along with the change of MMS concentration. The regulation of laccase expression was closely related to oxidative stress. The overexpressed laccase in the supernatant improved the decolorization of synthetic dyes (16.43% for Congo Red, 54.05% for Crystal Violet, and 41.61% for Reactive Blue 4). Laccase was subsequently expressed in E. coli. Investigation of the potential of bacterial laccase in dye remediation using Congo Red showed that an effective degradation of azo dye could be achieved with laccase treatment. Laccase remediation alleviated the cytotoxicity of Congo Red to human hepatocytes. In silico study identified eight amino acid residues of laccase involved in binding with Congo Red. Overall, regulation of oxidative stress towards bacterium can be used as a promising approach for the improvement of bacterial bioactivity in synthetic dye remediation.

Adsorption behavior and mechanism of Serratia marcescens for Eu(III) in rare earth wastewater

Directly discharging low-concentration rare-earth wastewater not only wastes rare-earth resources but also pollutes the environment. In this study, the biosorption behavior of Serratia marcescens for Eu(III) was studied with emphasis on the optimization of adsorption conditions, adsorption kinetics, and adsorption isotherm. It was shown that the maximum adsorption capacity of Serratia marcescens reached 115.36 mg·g^-1 under an optimal condition, indicating the good adsorption capability of Serratia marcescens for Eu(III). The adsorption kinetics and adsorption isotherm analysis showed that the adsorption process conforms to the pseudo-second-order kinetic model and Langmuir adsorption isotherm, indicating that the adsorption of Eu(III) by Serratia marcescens is a monolayer chemical adsorption process. In addition, the adsorption mechanism was investigated by using characterizations of zeta potential, scanning electron microscope-energy dispersive spectrometer (SEM-EDS), Fourier transform infrared (FT-IR), and X-ray photoelectron spectroscopy (XPS) analyses. It was revealed that the adsorption of Eu(III) by S. marcescens is a combination of electrostatic attraction, ions exchange and coordination. These findings indicate that S. marcescens can be used as a potential biosorbent to recover rare earth elements from rare earth wastewater.

A novel effect of combining microorganisms and graphene oxide for solidifying simulated nuclides strontium

Inspired by microbial diagenesis and mounding, microbial mineralization technology has been widely used in the treatment of heavy metal and radionuclide contamination. S. pasteurii can decompose urea as a source of energy to produce CO₃^2- in the microbial mineralization system. Therefore, strontium-contaminated radioactive wastewater can be effectively treated by combining CO₃^2- with surrounding strontium ions (Sr²⁺) to form strontium carbonate (SrCO₃). Herein, we investigated how the concentration of graphene oxide (GO) and mineralization time influence the morphology of SrCO₃ and the mineralization efficiency. GO was used as a crystal regulator to solidify the radionuclide strontium in the microbial mineralization system to obtain large-scale rock-like SrCO₃ minerals. The results showed that GO can adsorb the surrounding Sr²⁺ with oxygen-containing functional groups on its surface to form SrCO₃ complexes, directly influencing the morphology and consolidation percentage of SrCO₃. Considering the leaching behaviour of nuclides, we further studied the stability of consolidated SrCO₃ minerals. The results indicated that the presence of GO improved the stability of the mineralized samples obtained in the microbial mineralization system.