Exploring the perspective of nano-TiO2 in hydrophobic modified cationic flocculant preparation: Reaction kinetics and emulsified oil removal performance

Superior performance of novel chitosan-based flocculants in decolorization of anionic dyes: Responses of flocculation performance to flocculant molecular structures and hydrophobicity and flocculation mechanism

To achieve economical and efficient decolorization, two novel flocculants, weakly hydrophobic comb-like chitosan-graft-poly (N, N-Dimethylacrylamide) (CSPD) and strongly hydrophobic chain-like chitosan-graft-L-Cyclohexylglycine (CSLC) were synthesized in this study. To assess the effectiveness and application of CSPD and CSLC, the impacts of factors, including flocculant dosages, initial pH, initial dye concentrations, co-existing inorganic ions and turbidities, on the decolorization performance were explored. The results suggested that the optimum decolorizing efficiencies of the five anionic dyes ranged from 83.17% to 99.40%. Moreover, for accurately controlling flocculation performance, the responses to flocculant molecular structures and hydrophobicity in flocculation using CSPD and CSLC were studied. The Comb-like structure gives CSPD a wider dosage range for effective decolorization and better efficiencies with large molecule dyes under weak alkaline conditions. The strong hydrophobicity makes CSLC more effective in decolorization and more suitable for removing small molecule dyes under weak alkaline conditions. Meanwhile, the responses of removal efficiency and floc size to flocculant hydrophobicity are more sensitive. Mechanism studies revealed that charge neutralization, hydrogen bonding and hydrophobic association worked together in the decolorization of CSPD and CSLC. This study has provided meaningful guidance for developing flocculants in the treatment of diverse printing and dyeing wastewater.

Insight into the purification of algael water by a novel flocculant with enhanced branched nanochitosan structure

For improving inadequate nanostructural stability and promote algal removal efficiency, a novel nanochitosan-grafted flocculant (PAD-g-MNC) with an enhanced branched nanostructure and high molecular weight (MW) was fabricated via maleic anhydride acylation polymerization. Characterization results verified the successful synthesis of the flocculant and the formation of an irregular particle nanostructure. PAD-g-MNC exhibited superior algal and extracellular organic matter (EOM) removal and obtained the turbidity and chlorophyll-a removal rates of 93.46%-95.39% and 95.10%-97.31%, respectively, at the dosage of 4-5 mg L^-1. The growth rate, strength factor, and recovery factor of algal flocs flocculated by PAD-g-MNC were 90.36, 0.63, and 0.27 (100 rpm), respectively, and were higher than other flocculants prepared through conventional methods. Results indicated that the high intrinsic viscosity and stability branched nanostructure promoted the formation of stable flocs and regeneration ability of flocs. MW distribution and three-dimensional fluorescence analyses revealed that the special structure of PAD-g-MNC was beneficial to the removal of tryptophan-like proteins in EOM. Strong adsorption-adhesion and bridging-netting effects of the nanostructure chain were the dominated mechanisms in the improvement of flocculation efficiency. This study provided theoretical and experimental guidance for the design of flocculants with superior performance and efficient algal water purification performance.

Characterization and flocculation performance of a newly green flocculant derived from natural bagasse cellulose

A newly green natural polymer bagasse cellulose based flocculant (PBCF) was synthesized utilizing a grafting copolymerization method for effectively enhancing humic acid (HA) removal from natural water. This work aims to investigate flocculation behavior of PBCF in synthetic water containing HA, and the effects of flocculant dose and initial solution pH on flocculation performance. Results showed that PBCF functioned well at a flocculant dose of 60 mg/L and pH ranging from 6.0 to 9.0. The organic removal efficiency in synthetic water in terms of HA (UV₂₅₄) and chemical oxygen demand (COD _Mn) were up to 90.6% and 91.3%, respectively. Furthermore, the charge neutralization and adsorption bridging played important roles in HA removal. When applied for lake water, PBCF removed 91.6% turbidity and 50.0% dissolved organic matter, respectively. In short, PBCF demonstrates great potential in water treatment in a safe and environmentally friendly or 'green' way.

Influences of charge properties and hydrophobicity on the coagulation of inorganic and organic matters from water associated with starch-based coagulants

In this work, two series of binary graft cationic starch-based coagulants (CS-DMCs and CS-DMLs) with different hydrophobicities and charge densities (CDs) were prepared by graft copolymerization of acrylamide with 2-(methacryloyloxy)-N,N,N- trimethylethanaminium chloride and acryloyloxyethyl dimethyl benzyl ammonium chloride, respectively, on the starch (St) backbone. Kaolin particles, sodium humate (NaHA), and bovine serum albumin (BSA) were used as the simulated sources of inorganic colloidal particles and different organic pollutants in the micropolluted turbid surface water. The influences of the CD and hydrophobicity associated with the St-based coagulants on the removal of kaolin particles, NaHA, and BSA from single, binary, and ternary pollutant aqueous systems were investigated systematically. On the basis of the apparent coagulation performance, the floc characteristics, and the zeta potentials of the supernatants after coagulation, the coagulation mechanisms associated with the structural features of the St-based coagulants and the pollutants treated were explored and discussed in detail. The St-based coagulants with a higher CD and a stronger hydrophobicity showed better coagulation performance due to the synergistic effects of charge neutralization and hydrophobic association. The maximum efficiencies of the optimized St-based coagulant in removal of Kaolin, NaHA and BSA were 93.85%, 100% and 97.52% in their respective single pollutant systems. In addition to these simulated water samples, a real micropolluted turbid surface water tested and compared, further confirming the superiority of the hydrophobically modified cationic St-based coagulants, especially in the purification of organic pollutants in water.

Evaluating the performance of bridging-assembly chelating flocculant for heavy metals removal: Role of branched architectures

A novel chelating flocculant with branched architectures, polyacrylamide grafted maleoyl chitosan-mercaptoacetic acid (PAM-g-M(CS-MA)), was successfully fabricated using maleic anhydride as the "bridge" between chitosan and polyacrylamide. The functional groups and structural characteristic information of copolymers were obtained via characterization analysis. Flocculation performance was systematically investigated via purifying a series of simulated wastewater containing Cu or Cd. The properties of the flocs were studied to give in-depth evidences for the role of chelation groups and branched architectures in flocculation. Results indicated that PAM-g-M(CS-MA) showed excellent flocculation capacity for heavy metals in high concentrations and was superior to other chelating flocculants. The maximum flocculation efficiency of Cu (93.90%) and Cd (92.47%) was achieved by PAM-g-M(CS-MA) at pH 7, dosage of 100 mg L^-1 and stirring speed of 90 rpm. The flocculation mechanisms of PAM-g-M(CS-MA) were deeply explored through the analyses of floc properties. The strong synergistic chelation of mercapto, carboxyl, amide and hydroxyl groups predominated for the capturing of heavy metals; and the branched architectures facilitated the formation of large and stable flocs via adsorption and bridging-furl effect. This study provided a solid foundation for the fabrication of flocculants for heavy metal wastewater treatment.