Efficient α-MnO2 with (2 1 0) facet exposed for catalytic oxidation of toluene at low temperature: A combined in-situ DRIFTS and theoretical investigation

Catalytic oxidation of toluene by manganese oxides: Effect of K+ doping on oxygen vacancy

Alkali metal potassium was beneficial to the electronic regulation and structural stability of transition metal oxides. Herein, K ions were introduced into manganese oxides by different methods to improve the degradation efficiency of toluene. The results of activity experiments indicated that KMnO4-HT (HT: Hydrothermal method) exhibited outstanding low-temperature catalytic activity, and 90% conversion of toluene can be achieved at 243°C, which was 41°C and 43°C lower than that of KNO3-HT and Mn-HT, respectively. The largest specific surface area was observed on KMnO4-HT, facilitating the adsorption of toluene. The formation of cryptomelane structure over KMnO4-HT could contribute to higher content of Mn3+ and lattice oxygen (Olatt), excellent low-temperature reducibility, and high oxygen mobility, which could increase the catalytic performance. Furthermore, two distinct degradation pathways were inferred. Pathway Ⅰ (KMnO4-HT): toluene → benzyl → benzoic acid → carbonate → CO2 and H2O; Pathway ⅠⅠ (Mn-HT): toluene → benzyl alcohol → benzoic acid → phenol → maleic anhydride → CO2 and H2O. Fewer intermediates were detected on KMnO4-HT, indicating its stronger oxidation capacity of toluene, which was originated from the doping of K+ and the interaction between KOMn. More intermediates were observed on Mn-HT, which can be attributed to the weaker oxidation ability of pure Mn. The results indicated that the doping of K+ can improve the catalytic oxidation capacity of toluene, resulting in promoted degradation of intermediates during the oxidation of toluene.

Insight into modified CeMn based catalysts for efficient degradation of toluene by in situ infrared

Trace activated carbon (AC) and diatomaceous earth (DE) were used as structural promoters to be incorporated into Ce-Mn-based solid-solution catalysts by the redox precipitation method. The modified catalysts exhibit superior reducibility, with abundant Ce3+, Mn3+and reactive oxygen species, which are facilitated to the migration of oxygen and the generation of oxygen vacancies. In particular, the catalytic combustion temperatures of 90 % toluene (3000 ppm) on Ce1Mn3Ox-AC/DE were 84 °C (dry) and 123 °C (10 vol% H2O), respectively. The role of lattice oxygen and adsorbed oxygen was revealed by in situ DRIFTS. Additionally, in situ DRIFTS was employed to verify that the degradation of toluene by Ce1Mn3Ox-AC/DE satisfied the Langmuir-Hinshelwood (L-H) mechanism and the Mars-Van Krevelen (MvK) mechanism. The possible reaction pathway was elucidated (toluene → benzyl alcohol → benzoic acid → maleic anhydride → CO2 + H2O). Furthermore, final products attributed to toluene oxidation were detected by in situ DRIFTS at 50 °C in the absence of oxygen, confirming that the catalyst possessed outstanding performance at low temperatures beyond mere adsorption.

Controlled synthesis of Fe3O4/MnO2 (3 1 0)/ZIF-67 composite with enhanced synergetic effects for the highly selective and efficient adsorption of Cu (II) from simulated copperplating effluents

This study designed a composite material with internal synergistic effects among multiple components to achieve highly selective adsorption of Cu (II). Through controlled synthesis, the Fe3O4/MnO2(3 1 0)/ZIF-67 composite was successfully fabricated, leading to significant improvement in adsorption selectivity, capacity, and adsorption rate. The experimental results showed that the composite is of outstanding selectivity in the adsorption of Cu (II), with a partition coefficient K of Cu (II) that was 2.2-5.3 times higher than that of other coexisting ions. Moreover, the composite exhibited a remarkable adsorption capacity of 1261.0 mg g-1 and a fast adsorption rate of 840.7 mg g-1 h-1 at 298 K. Additionally, its magnetic property facilitated easy separation from wastewater, thereby enhancing its potential for commercial applications. The synergetic effect mechanism was analyzed through characterizations and DFT calculations. Furthermore, the recyclability of the composite was investigated, which showed that after seven cycles, the adsorption efficiency remained at 85% of its initial efficiency. It can be concluded that Fe3O4/MnO2(3 1 0)/ZIF-67 has potential to address challenges posed by heavy metal pollution in copperplating effluents.

Catalytic removal of toluene using MnO2-based catalysts: A review

Volatile organic compounds (VOCs) have serious hazard to human health and ecological environment. Due to its low cost and high activity, the catalytic oxidation technology considered to be the most effective method to remove VOCs. Toluene is one of the typical VOCs, hence its catalytic elimination is crucial for the regulation of VOCs. Manganese dioxide (MnO₂) has been extensively studied for its excellent redox performance and low-temperature operation conditions. In this review, we summarize the research progresses in the toluene catalytic oxidation of MnO₂-based catalysts, which contain single MnO₂, metal-doped MnO₂ and supported MnO₂ catalyst. In particular, we pay much attention on the relationship between the chemical properties and toluene oxidation performance over MnO₂ catalyst, as well as the catalytic reaction mechanisms. Moreover, the effects of different crystal forms and morphologies on the catalytic toluene reaction were discussed. And the perspective on MnO₂ catalysts for the catalytic oxidation of toluene has been proposed. We expect that the summary of these important findings can serve as an important reference for the catalytic treatment of VOCs.

Cancer-Responsive Multifunctional Nanoplatform Based on Peptide Self-Assembly for Highly Efficient Combined Cancer Therapy by Alleviating Hypoxia and Improving the Immunosuppressive Microenvironment

Hypoxia, as a main feature of the tumor microenvironment, has greatly limited the efficacy of photodynamic therapy (PDT), as well as its clinical application. Here, a multifunctional composite nanoplatform, the peptide/Ce6/MnO₂ nanocomposite (RKCM), has been constructed to alleviate tumor hypoxia and increase the efficacy of PDT using rationally designed peptide fibrils to encapsulate chlorin e6 (Ce6) inside and to mineralize MnO₂ nanoparticles on the surface. As a result, RKCM significantly improved the PDT efficacy by increasing reactive oxygen species (ROS) generation, decreasing tumor cell viability, and inhibiting tumor growth and metastasis. Besides, decreased HIF-1α expression and increased immune-activated cell infiltration were also observed in RKCM/laser treatment xenograft. Mechanically, (1) Ce6 can induce singlet oxygen (¹O₂) generation under laser irradiation to give photodynamic therapy (PDT); (2) MnO₂ can react with H₂O₂ in situ to supply additional O₂ to alleviate tumor hypoxia; and (3) the released Mn²⁺ ions can induce a Fenton-like reaction to generate ^•OH for chemical dynamic therapy (CDT). Moreover, RKCM/laser treatment also presented with an abscopal effect to block the occurrence of lung metastasis by remolding the pre-metastasis immune microenvironment. With these several aspects working together, the peptide/Ce6/MnO₂ nanoplatform can achieve highly efficient tumor therapy. Such a strategy based on peptide self-assembly provides a promising way to rationally design a cancer-responsive multifunctional nanoplatform for highly efficient combined cancer therapy by alleviating hypoxia and improving the immune microenvironment.

Capture-bonding Super Assembly of Nanoscale Dispersed Bimetal on Uniform CeO2 Nanorod for the Toluene Oxidation

Elimination of VOCs by catalytic oxidation is an important technology. Here, a general synergistic capture-bonding superassembly strategy was proposed to obtain the nanoscale dispersed 5.8% PtFe₃ -CeO₂ catalyst, which showed a high toluene oxidation activity (T₁₀₀ =226 °C), excellent catalytic stability (125 h, >99.5%) and a good water resistance ability (70 h, >99.5%). Through the detailed XPS analysis, oxygen cycle experiment, hydrogen reduction experiment, and in-situ DRIFT experiment, we could deduce that PtFe₃ -CeO₂ had two reaction pathways. The surface adsorbed oxygen resulting from PtFe₃ nanoparticles played a dominant role, due to the fast cycling between the surface adsorbed oxygen and oxygen vacancy. In contrast, the lattice oxygen resulting from CeO₂ nanorods played an important role due to the relationship between the toluene oxidation activity and the metal-oxygen bonding energy. Furthermore, DFT simulation verified Pt sites were the dominant reaction active sites during this reaction.

Activation of peroxymonosulfate by α-MnO2 for Orange Ⅰ removal in water

Developing high-efficiency catalysts for peroxymonosulfate (PMS)-based advanced oxidation processes is important for eliminating pollutants in water. Herein, α-MnO₂ with major exposed {110} and {100} facets prepared via a hydrothermal method were used as catalysts to activate PMS for the degradation of Orange Ⅰ (OⅠ). α-MnO₂-100, with more abundant surface hydroxyl groups and greater reductive ability, performed remarkably better than α-MnO₂-110 for degrading OⅠ. OⅠ removal of 86.20% was obtained in the α-MnO₂-100/PMS system. The apparent rate constant of OⅠ removal over α-MnO₂-100 was 2.11 times higher than that of α-MnO₂-110. The effects of PMS concentration, catalyst dosage, OⅠ concentration, initial pH, anions and humic acid (HA) on OⅠ degradation in the α-MnO₂-100/PMS system were systematically investigated. Quenching experiments and electron paramagnetic resonance (EPR) demonstrated that SO₄^•-, •OH, O₂^•- and ¹O₂ were the reactive oxygen species (ROS) in the α-MnO₂-100/PMS system. Moreover, the possible degradation pathway of OⅠ in the α-MnO₂-100/PMS system was proposed. This work provides an ideal metal oxide catalyst for sewage remediation.

Insights into the role of strontium in catalytic combustion of toluene over La1-xSrxCoO3 perovskite catalysts

A series of LaCoO₃ perovskite catalysts substituted by Sr in the A site (La_1-xSr_xCoO₃) were prepared via a facile sol-gel method. The catalytic activity of these perovskite catalysts for the deep oxidation of toluene was evaluated. It was found that Sr substitution significantly enhanced the redox properties, the concentration of oxygen vacancies, and surface Co³⁺ active species via an electron interaction between Sr and Co from the results of Raman spectroscopy, H₂-TPR (temperature programmed reduction), O₂-TPD (temperature programmed desorption) and XPS (X-ray photoelectron spectroscopy). Typically, La_0.82Sr_0.18CoO₃ (L_0.82S_0.18C) exhibited a superior catalytic performance among these samples owing to its best reducibility and highest number of active species. Kinetic analysis further revealed a higher reaction rate (5.1 × 10^-7 mol g^-1·s^-1 at 210 °C) and a lower apparent activation energy (69.1 kJ mol^-1) for toluene oxidation on the L_0.82S_0.18C sample in comparison to those on the others. In situ DRIFTS (diffuse reflectance infrared Fourier transform spectroscopy) confirmed the easy desorption of immediate products from the surface of the L_0.82S_0.18C sample, which could be responsible for its remarkable performance. These results could provide an efficient strategy for promoting the toluene oxidation through finely tuning the reducibility and surface active phase of the catalysts.

Recent progresses in the synthesis of MnO2 nanowire and its application in environmental catalysis

Nanostructured MnO2 with various morphologies exhibits excellent performance in environmental catalysis owing to its large specific surface area, low density, and adjustable chemical properties. The one-dimensional MnO2 nanowire has been proved to be the dominant morphology among various nanostructures, such as nanorods, nanofibers, nanoflowers, etc. The syntheses and applications of MnO2-based nanowires also have become a research hotspot in environmental catalytic materials over the last two decades. With the continuous deepening of the research, the control of morphology and crystal facet exposure in the synthesis of MnO2 nanowire materials have gradually matured, and the catalytic performance also has been greatly improved. Differences in the crystalline phase structure, preferably exposed crystal facets, and even the length of the MnO2 nanowires will evidently affect the final catalytic performances. Besides, the modifications by doping or loading will also significantly affect their catalytic performances. This review carefully summarizes the synthesis strategies of MnO2 nanowires developed in recent years as well as the influences of the phase structure, crystal facet, morphology, dopant, and loading amount on the catalytic performance. Besides, the cutting-edge applications of MnO2 nanowires in the field of environmental catalysis, such as CO oxidation, the removal of VOCs, denitrification, etc., have been also summarized. The application of MnO2 nanowire in environmental catalysis is still in the early exploratory stage. The gigantic gap between theoretical investigation and industrial application is still a great challenge. Compared with noble metal based traditional environmental catalytic materials, the lower cost of MnO2 has injected new momentum and promising potential into this research field.