Carbon supports on preparing iron-nitrogen dual-doped carbon (Fe-N/C) electrocatalysts for microbial fuel cells: mini-review

Rapid Synthesis and Microenvironment Optimization of Hierarchical Porous Fe─N─C Catalysts for Enhanced ORR in Microbial Fuel Cells

Here, an approach to produce a hierarchical porous Fe-N-C@TABOH catalyst with densely accessible high intrinsic active FeNx sites is proposed. The method involves a single-step pyrolysis of Zn/Fe-zeolitic imidazolate framework (Zn/Fe-ZIF-H) with tetrabutylammonium hydroxide (TABOH) micelles, which is obtained by utilizing TABOH as a structural template and electronic mediator at room temperature for a brief duration of 16 min. Notably, the yield of Zn/Fe-ZIF-H is 3.5 times that of Zn/Fe-ZIF-N prepared by conventional method. Results indicate that in addition to expediting synthesis and increasing yield of the Zn/Fe-ZIF-H, the TABOH induces a hierarchical porous structure and fosters the formation of more and higher intrinsic active FeNx moieties in Fex-N-C@TABOH, showing that TABOH is a multifunctional template. Crucially, the increased mesoporosity/external surface area and optimized microenvironment of Fe-N-C@TABOH significantly enhance ORR activity by facilitating the formation of high intrinsic active FeNx sites, increasing accessible FeNx sites, and reducing mass transfer resistance. Through structure tailoring and microenvironment optimization, the resulting Fe-N-C@TABOH exhibits superior ORR performance. DFT calculation further validates that the synergistic effect of these two factors leads to low ORR barrier and optimized *OH adsorption energy. This study underscores the importance of structure and electronic engineering in the development of highly active ORR catalysts.

A facile approach for sulphur and nitrogen co-doped carbon nanodots to improve photothermal eradication of drug-resistant bacteria

In this study, we produced S, N co-doped CNDs (SN@CNDs) by using dimethyl sulfoxide (DMSO) and formamide (FA) as single sources of S and N, respectively. We varied the S/N ratios by adjusting the volume ratios of DMSO and FA and investigated their effect on the red-shift of the CNDs' absorption peak. Our findings demonstrate that SN@CNDs synthesized using a volume ratio of 5:6 between DMSO and FA exhibit the most significant absorption peak redshift and enhanced near-infrared absorption performance. Based on comparative analysis of the particle size, surface charge, and fluorescence spectrum of the S@CNDs, N@CNDs, and SN@CNDs, we propose a possible mechanism to explain the change of optical properties of CNDs due to S, N doping. Co-doping creates a more uniform and smaller band gap, resulting in a shift of the Fermi level and a change in energy dissipation from radioactive to non-radiative decay. Importantly, the as-prepared SN@CNDs exhibited a photothermal conversion efficiency of 51.36% at 808 nm and demonstrated exceptional photokilling effects against drug-resistant bacteria in both in vitro and in vivo experiments. Our facile method for synthesizing S and N co-doped CNDs can be extended to the preparation of other S and N co-doped nanomaterials, potentially improving their performance.

Critical Review on Nanomaterials for Enhancing Bioconversion and Bioremediation of Agricultural Wastes and Wastewater

Anaerobic digestion (AD), microalgae cultivation, and microbial fuel cells (MFCs) are the major biological processes to convert organic solid wastes and wastewater in the agricultural industry into biofuels, biopower, various biochemical and fertilizer products, and meanwhile, recycle water. Various nanomaterials including nano zero valent irons (nZVIs), metal oxide nanoparticles (NPs), carbon-based and multicompound nanomaterials have been studied to improve the economics and environmental sustainability of those biological processes by increasing their conversion efficiency and the quality of products, and minimizing the negative impacts of hazardous materials in the wastes. This review article presented the structures, functionalities and applications of various nanomaterials that have been studied to improve the performance of AD, microalgae cultivation, and MFCs for recycling and valorizing agricultural solid wastes and wastewater. The review also discussed the methods that have been studied to improve the performance of those nanomaterials for their applications in those biological processes.

Contribution of configurations, electrode and membrane materials, electron transfer mechanisms, and cost of components on the current and future development of microbial fuel cells

Microbial fuel cells (MFCs) are a technology that can be applied to both the wastewater treatment and bioenergy generation. This work discusses the contribution of improvements regarding the configurations, electrode materials, membrane materials, electron transfer mechanisms, and materials cost on the current and future development of MFCs. Analysis of the most recent scientific publications on the field denotes that dual-chamber MFCs configuration offers the greatest potential due to the excellent ability to be adapted to different operating environments. Carbon-based materials show the best performance, biocompatibility of carbon-brush anode favors the formation of the biofilm in a mixed consortium and in wastewater as a substrate resembles the conditions of real scenarios. Carbon-cloth cathode modified with nanotechnology favors the conductive properties of the electrode. Ceramic clay membranes emerge as an interesting low-cost membrane with a proton conductivity of 0.0817 S cm^-1, close to that obtained with the Nafion membrane. The use of nanotechnology in the electrodes also enhances electron transfer in MFCs. It increases the active sites at the anode and improves the interface with microorganisms. At the cathode, it favors its catalytic properties and the oxygen reduction reaction. These features together favor MFCs performance through energy production and substrate degradation with values above 2.0 W m^-2 and 90% respectively. All the recent advances in MFCs are gradually contributing to enable technological alternatives that, in addition to wastewater treatment, generate energy in a sustainable manner. It is important to continue the research efforts worldwide to make MFCs an available and affordable technology for industry and society.

Co, N co-doped hierarchical porous carbon as efficient cathode electrocatalyst and its impact on microbial community of anode biofilm in microbial fuel cell

The exploration of low-cost, long-term stable, and highly electrochemically active cathode catalysts is important for the practical application of microbial fuel cell (MFC). In this work, a series of the 3D hierarchical porous Co-N-C (3DHP Co-N-C) materials are designed and synthesized by a metal-organic framework ZIF-67 as a precursor and SiO₂ sphere of different sizes as the hard template. The 3DHP Co-N-C-2 with 129 nm macropore exhibits excellent ORR performance in 0.1 M KOH solution with a half-wave potential of 0.80 V vs. RHE and superior durability than Pt/C (20%) due to the specific macropore-mesopore-micropore structure that exposes a large number of active sites and accelerates the electrolyte transport and oxygen diffusion. The MFC with 3DHP Co-N-C-2 as the cathode catalysts shows excellent performance with a maximum power density of 426.9±7.87 mW m^-2 and favorable durability after 50 d of operation. In addition, 16s rDNA results reveal the presence of different dominant electrogenic bacteria and different abundance of important non-electrogenic bacteria in the anode biofilm in MFCs using cathode catalysts with different ORR activity. And 3DHP Co-N-C-2 was found to be beneficial to the synergistic effect of electrogenic and non-electrogenic bacteria. This study explores electrocatalysts in terms of both electrocatalytic activity and anode microorganisms, providing new and comprehensive insights into the power generation of MFC.