New application for TiO2 P25 photocatalyst: A case study of photoelectrochemical sensing of nitrite ions

Stability and biomineralization of cadmium sulfide nanoparticles biosynthesized by the bacterium Rhodopseudomonas palustris under light

Cadmium (Cd) pollution is regarded as a potent problem due to its hazard risks to the environment, making it crucial to be removed. Compared to the physicochemical techniques (e.g., adsorption, ion exchange, etc.), bioremediation is a promising alternative technology for Cd removal, due to its cost-effectiveness, and eco-friendliness. Among them, microbial-induced cadmium sulfide mineralization (Bio-CdS NPs) is a process of great significance for environmental protection. In this study, microbial cysteine desulfhydrase coupled with cysteine acted as a strategy for Bio-CdS NPs by Rhodopseudomonas palustris. The synthesis, activity, and stability of Bio-CdS NPs-R. palustris hybrid was explored under different light conditions. Results show that low light (LL) intensity could promote cysteine desulfhydrase activities to accelerate hybrid synthesis, and facilitated bacterial growth by the photo-induced electrons of Bio-CdS NPs. Additionally, the enhanced cysteine desulfhydrase activity effectively alleviated high Cd-stress. However, the hybrid rapidly dissolved under changed environmental factors, including light intensity and oxygen. The factors affecting the dissolution were ranked as follows: darkness/microaerobic ≈ darkness/aerobic < LL/microaerobic < high light (HL)/microaerobic < LL/aerobic < HL/aerobic. The research provides a deeper understanding of Bio-CdS NPs-bacteria hybird synthesis and its stability in Cd-polluted water, allowing advanced bioremediation treatment of heavy metal pollution in water.

Sustainable approaches towards green synthesis of TiO2 nanomaterials and their applications in photo-catalysis mediated sensingtomonitor environmental pollutions

Nanomaterials are gaining enormous interests owing to their novel applications that have been explored nearly in every field of our contemporary society. In this scenario, preparations of nanomaterials following green routes have attracted widespread attention in terms of sustainable, reliable and environmentally friendly practice to produce diverse nanostructures. In this review, we summarized the fundamental processes and mechanisms of green synthesis approaches of TiO₂ NPs. We explore the role of plants and microbes as natural bioresources to prepare TiO₂ NPs. Particularly, focused have been made to explore the potential of TiO₂ based nanomaterials to design variety of sensing platforms by exploiting the photo-catalysis efficiency under the influence of light source. Such types of sensing can of massive importance to monitor the environmental pollutions and thereby to invent advanced strategies to remediate hazardous pollutants to offer clean environment.

Revisiting the mechanisms of nitrite ions and ammonia removal from aqueous solutions: photolysis versus photocatalysis

Nitrite ions and ammonia are widespread forms of inorganic water pollutants. Nevertheless, the mechanisms of their photolytic and photocatalytic reactions under UV-A irradiation are still fully undisclosed, particularly, at different pH values under aerobic and inert atmospheres. Herein, we have studied the photolytic decomposition of nitrite ions under different conditions using 365 nm UV-A LED as a light source instead of mercury lamps that emit photons in the UV-B region and generate a lot of heat. The results indicated that the rate of nitrite disproportionation in the dark at pH ≤ 3.0 is remarkably high relative to the rate of the photolytic decomposition. At pH ˃ 3, the photolytic reaction is negligible and nitrite ions showed considerable stability. In contrast, the photocatalytic oxidation of nitrite ions over TiO₂ photocatalysts, namely, TiO₂P25, TiO₂UV100, and TiO₂ anatase/brookite mixture proceeds at pH ˃ 3.0. TiO₂ P25 exhibited the highest photocatalytic activity at pH 5. Interestingly, the photolytic simultaneous removal of nitrite ions and ammonia was possible at pH 9.0 in the absence of oxygen (Ar atmosphere). A 42.69 ± 0.66%, 27.75 ± 1.7%, and 32.74 ± 0.59% of nitrogen calculated based on nitrite, ammonia, and both of them, respectively, can be removed after 6 h of UV-A irradiation. The selectivity of N₂ evolution was 77.6%. The nitrogen removal rate was significantly reduced in the presence of TiO₂ photocatalyst evincing that TiO₂ photocatalysis is applicable for nitrite ions oxidation, whereas the photolytic process is better suited for the simultaneous removal of nitrite ions and ammonia.

Determination of nitrite in food based on its sensitizing effect on cathodic electrochemiluminescence of conductive PTH-DPP films

Herein, a novel strategy for electrochemiluminescence (ECL) detection of nitrite based on its sensitization effect on cathode ECL emission of 3,6-di(2-thienyl)-2,5-dihydropyrrolo [3,4-c] pyrrole-1,4-dione (TH-DPP) polymeric films (PTH-DPP) was formulated, by means of a one-step electropolymerization of TH-DPP with a short time on the glassy carbon electrode (GCE). It was shown that the PTH-DPP film-modified GCE exhibited a strong ECL response when S₂O₈^2- was used as a co-reactant. The ECL emission could be greatly enhanced by PTH-DPP with nitrite in a K₂S₂O₈/PBS solution system and occurred at a relatively lower potential in comparison with traditional cathode ECL emitter, leading to high sensitivity and good selectivity. The ECL sensor exhibits excellent linear relationship in the ranges of 0.3 to 100 μM and 100 to 1000 μM for nitrite detection, with an outstanding detection limit of 0.08 μM (S/N = 3). The ECL sensor provides an impressive outcome for the detection of practical samples.

Evaluation of photodegradation performance by paper microzones

Currently, the performance evaluation of catalysts usually requires expensive instruments. Hence, it is imperative to develop an alternative, green and sustainable method to investigate the photocatalytic reaction processes. Herein, the variation of degradation performance of different wastewaters with different dosage of P25 TiO₂ was evaluated to verify the reliability of the paper microzones method (PMZs). The optimum P25 TiO₂ dosage of 1 g/L for the degradation of methylene blue (MB) (UV light for 6 mins) and 0.5 g/L for the degradation of fuchsin basic (FB) (UV light for 5 mins) was obtained by the PMZs method. For the photocatalytic degradation of trivalent iron ion complexed salicylic acid (Fe(III)-SA) solution, the R² values of 0.904 and 0.801 were obtained for the photocatalytic reaction kinetics by PMZs and spectrophotometry, respectively, which again indicated the high reliability of PMZs. The accuracy of the results obtained by PMZs method relative to the spectrophotometric method ranged from 68.80% to 87.54% when degrading MB, FB, mixture of MB and FB, and Fe(III)-SA by P25 TiO₂. Therefore, the PMZs method is all in line with the requirements of low-carbon environmental protection and green chemistry, and has broad application prospects in the future.

Recent advances in photocatalytic decomposition of water and pollutants for sustainable application

Photoinduced reduction and oxidation, the important processes in photocatalytic water splitting and organic degradation, have generated increasing interest to address the energy and environmental issues. In this review, the recent developments in bandgap and interfacial engineering for enhanced light absorption, efficient charge separation and interfacial reaction are focused toward the applications in photocatalytic water splitting and organic degradation. In photoinduced reduction for hydrogen evolution, three major strategies are discussed: cocatalysts, sacrificial agents and heterojunctions. In photoinduced oxidation for organic degradation, three types of emerging pollutants of current concerns are highlighted: organic dyes, pharmaceuticals and volatile organic compounds. The key challenges of promising photocatalysts are discussed for future development and practical application.