Biosorption of iron ions through microalgae from wastewater and soil: Optimization and comparative study

Simultaneous immobilization of multiple heavy metal(loid)s in contaminated water and alkaline soil inoculated Fe/Mn oxidizing bacterium

Two strains of Fe/Mn oxidizing bacteria tolerant to high concentrations of multiple heavy metal(loid)s and efficient decontamination for them were screened. The surface of the bio-Fe/Mn oxides produced by the oxidation of Fe(II) and Mn(II) by Pseudomonas taiwanensis (marked as P4) and Pseudomonas plecoglossicida (marked as G1) contains rich reactive oxygen functional groups, which play critical roles in the removal efficiency and immobilization of heavy metal(loid)s in co-contamination system. The isolated strains P4 and G1 can grow well in the following environments: pH 5-9, NaCl 0-4%, and temperature 20-30°C. The removal efficiencies of Fe, Pb, As, Zn, Cd, Cu, and Mn are effective after inoculation of the strains P4 and G1 in the simulated water system (the initial concentrations of heavy metal(loid) were 1 mg/L), approximately reaching 96%, 92%, 85%, 67%, 70%, 54% and 15%, respectively. The exchangeable and carbonate bound As, Cd, Pb and Cu are more inclined to convert to the Fe-Mn oxide bound fractions in P4 and G1 treated soil, thereby reducing the phytoavailability and bioaccessible of heavy metal(loid)s. This research provides alternatives method to treat water and soil containing high concentrations of multi-heavy metal(loid)s.

Bioremediation potential of microalgae for sustainable soil treatment in India: A comprehensive review on heavy metal and pesticide contaminant removal

The escalating environmental concerns arising from soils contamination with heavy metals (HMs) and pesticides (PSTs) necessitate the development of sustainable and effective remediation strategies. These contaminants, known for their carcinogenic properties and toxicity even at small amounts, pose significant threats to both environmental ecology and human health. While various chemical and physical treatments are employed globally, their acceptance is often hindered by prolonged remediation times, high costs, and inefficacy in areas with exceptionally high pollutant concentrations. A promising emerging trend in addressing this issue is the utilization of microalgae for bioremediation. Bioremediation, particularly through microalgae, presents numerous benefits such as high efficiency, low cost, easy accessibility and an eco-friendly nature. This approach has gained widespread use in remediating HM and PST pollution, especially in large areas. This comprehensive review systematically explores the bioremediation potential of microalgae, shedding light on their application in mitigating soil pollutants. The paper summarizes the mechanisms by which microalgae remediate HMs and PSTs and considers various factors influencing the process, such as pH, temperature, pollutant concentration, co-existing pollutants, time of exposure, nutrient availability, and light intensity. Additionally, the review delves into the response and tolerance of various microalgae strains to these contaminants, along with their bioaccumulation capabilities. Challenges and future prospects in the microalgal bioremediation of pollutants are also discussed. Overall, the aim is to offer valuable insights to facilitate the future development of commercially viable and efficient microalgae-based solutions for pollutant bioremediation.

Integrating electro-Fenton and microalgae for the sustainable management of real food processing wastewater

The present study demonstrates, for the first time, the feasibility of a two-step process consisting of Electro-Fenton (EF) followed by microalgae to treat highly loaded real food processing wastewater along with resource recovery. In the first step, EF with a carbon felt cathode and Ti/RuO2-IrO2 anode was applied at different current densities (3.16 mA cm-2, 4.74 mA cm-2 and 6.32 mA cm-2) to decrease the amount of organic matter and turbidity and enhance biodegradability. In the second step, the EF effluents were submitted to microalgal treatment for 15 days using a mixed culture dominated by Scenedesmus sp., Chlorosarcinopsis sp., and Coelastrum sp. Results showed that current density impacted the amount of COD removed by EF, achieving the highest COD removal of 77.5% at 6.32 mA cm-2 with >95% and 74.3% of TSS and PO43- removal, respectively. With respect to microalgae, the highest COD removal of 85% was obtained by the culture in the EF effluent treated at 6.32 mA cm-2. Remarkably, not only 85% of the remaining organic matter was removed by microalgae, but also the totality of inorganic N and P compounds, as well as 65% of the Fe catalyst that was left after EF. The removal of inorganic species also demonstrates the high complementarity of both processes, since EF does not have the capacity to remove such compounds, while microalgae do not grow in the raw wastewater. Furthermore, a maximum of 0.8 g L-1 of biomass was produced after cultivation, with an accumulation of 32.2% of carbohydrates and 25.9% of lipids. The implementation of the two processes represents a promising sustainable approach for the management of industrial effluents, incorporating EF in a water and nutrient recycling system to produce biomass that could be valorized into clean fuels.

Heavy metals (copper and iron) and nutrients (nitrate and phosphate) removal from aqueous medium by microalgae Chlorella vulgaris and Scendesmus obliquus, and their biofilms

Microalgae have been discovered as an environmental-friendly and cost-effective solution for heavy metal treatment issues. This study illustrated the bioremediation of two heavy metals (e.g. copper and iron) and nutrients (e.g. nitrate and phosphate) uptake by freshwater microalgae Chlorella vulgaris (C. vulgaris) and Scendesmus obliquus (S. obliquus), and their 50-50% mix culture under the suspension and biofilm conditions. After one week of culture in 1L Erlenmeyer flasks, under the Organization for Economic Co-operation and Development (OECD) guideline, various concentrations of copper and iron were added to the culture bioreactors and their concentrations changes were studied. The results obtained showed that C. vulgaris, S. obliquus, and mix culture removed 98.25-99.9%, 98.75-99.1%, and 98.61-99.9% of copper and 90.22-94.05%, 85.68-99.19%, and 91.67-97.85% of iron, respectively. The results suggested that copper has more toxicity effects than iron. C. vulgaris showed to be the most vulnerable among cultures. S. obliquus showed to be more resistant to copper and iron stress situations. Mix culture showed better efficiency in iron uptake. It also demonstrated that there is a limit to nitrate uptake. Increasing heavy metal concentrations may increase nutrient uptake as long as it doesn't reach a toxic amount. Also, biofilm structure showed an effective role in heavy metal resistance.

Phytohormones enhance heavy metal responses in Euglena gracilis: Evidence from uptake of Ni, Pb and Cd and linkages to hormonomic and metabolomic dynamics

Over the last decade, significant effort has been made to understand phytohormonal functions (e.g., cytokinins (CKs) and abscisic acid (ABA)) in metal stress responses of higher plants and algae. Despite the potential for these phytohormones to improve industrial remediation by Euglena gracilis (Euglenophyceae), no such roles have been elucidated for this highly adaptive species and its response to heavy metals. This study demonstrates that toxic metals (nickel, lead, cadmium) modify hormonal activity profiles (i.e., CK forms and their concentrations) in E. gracilis. Furthermore, exogenous ABA or CK (tZ) enabled higher metal uptake efficiency (i.e., 9.35% in lead and 9.2% in cadmium uptake with CK) and alleviated metal toxicity through the regulation of endogenous CKs (i.e., total CK, isoprenoid CK) and gibberellin (GAs, GA₁ and GA₃) levels. These responses suggest that E. gracilis regulates multiple phytohormone signals during metal stress acclimation. A deeper approach, using untargeted metabolomic analyses, gave more detailed insight into phytohormone-controlled pathways and associated modified metabolites, which were frequently related to metal accumulation and the physiological acclimation to metal presence. Significant changes in the levels of cellular metabolites, especially those involved in acclimation to metal stress, were under the influence of phytohormones in algal cells. When grown under metal stress conditions, the presence of exogenous ABA or CKs, caused changes in cellular metabolites which included those from: lipid pathways, riboflavin metabolism, the biosynthesis of cofactors/vitamins, and carbohydrate metabolism. Also, bioactive secondary metabolites (e.g., terpenoids, alkaloids, flavonoids, carotenoids) were modified in algal cells treated with phytohormones. Thus, the study gives a detailed view on the regulatory functions of ABA and CKs in algal metal bioremediation strategies, which are attributed to enhanced metal uptake and in the fine-tuning of plant hormone levels during metal stress response. The results can guide efforts to develop efficient, low-cost and environmentally friendly methods for bioremediation.

Indigenous cyanobacteria enhances remediation of arsenic-contaminated soils by regulating physicochemical properties, microbial community structure and function in soil microenvironment

Biocrust was widely used for the immobilization and removal of arsenic (As) in drainage systems of rice fields and mining areas. In this study, the role of an indigenous cyanobacteria (Leptolyngbya sp. XZMQ) was explored in the bioremediation of As-contaminated farmland and tailing soil. After 80 d of inoculation with cyanobacteria, total As (As(T)) accumulated in the cyanobacterial crust of farmland and tailing soil was 279.89 mg kg^-1 and 269.57 mg kg^-1, respectively, and non-EDTA exchangeable fraction was the major fraction of it. The As(T) in farmland and tailing soil of micro-environment decreased by 10.76% and 12.73%, respectively. Meanwhile, the available As (As(a)) decreased by 21.25% and 27.65%, respectively. The XRD results showed that hematite and SiO₂ existed in cyanobacterial crust of farmland and tailing soil. FTIR spectra indicated that the adsorption of As in cyanobacterial crust was mediated by OH and CO. After inoculation of Leptolyngbya sp. XZMQ, in subcrust soil, As biotransformation gene aioA was the most abundant, followed by arsM. The dominant phyla of soil biota were Proteobacteria, Cyanobacteria, Actinobacteria, and Bacteroiota, which could play critical roles in shaping aioA and arsM harboring microbe communities in soil. Redundancy analysis (RDA) showed that soil organic carbon (OC), pH, and chlorophyll a (Chl a) were the most important environmental factors in altering soil bacterial communities. Correlation analysis showed the Leptolyngbya had a positive correlation with Chl a, effective nitrogen (N(a)), electrical conductivity (EC), OC, pH in the soil, respectively, while it had a significant negative correlation with As(a), As(III) and As(T). These results emphasized on the significance of cyanobacteria in the behavior of As in mine soils and offered a promising strategy for bioremediation of As-contaminated soil in the mining area.

A review on biodiesel production from microalgae: Influencing parameters and recent advanced technologies

Microalgae are the important part of carbon cycle in the nature, and they could utilize the carbon resource in water and soil efficiently. The abilities of microalgae to mitigate CO₂ emission and produce oil with a high productivity have been proven. Hence, this third-generation biodiesel should be popularized. This review firstly introduce the basic characteristics and application fields of microalgae. Then, the influencing parameters and recent advanced technologies for the microalgae biodiesel production have been discussed. In influencing parameters for biodiesel production section, the factors of microalgae cultivation, lipid accumulation, microalgae harvesting, and lipid extraction have been summarized. In recent advanced technologies for biodiesel production section, the microalgae cultivation systems, lipid induction technologies, microalgae harvesting technologies, and lipid extraction technologies have been reviewed. This review aims to provide useful information to help future development of efficient and commercially viable technology for microalgae-based biodiesel production.

Sustainable and efficient technologies for removal and recovery of toxic and valuable metals from wastewater: Recent progress, challenges, and future perspectives

Due to their numerous effects on human health and the natural environment, water contamination with heavy metals and metalloids, caused by their extensive use in various technologies and industrial applications, continues to be a huge ecological issue that needs to be urgently tackled. Additionally, within the circular economy management framework, the recovery and recycling of metals-based waste as high value-added products (VAPs) is of great interest, owing to their high cost and the continuous depletion of their reserves and natural sources. This paper reviews the state-of-the-art technologies developed for the removal and recovery of metal pollutants from wastewater by providing an in-depth understanding of their remediation mechanisms, while analyzing and critically discussing the recent key advances regarding these treatment methods, their practical implementation and integration, as well as evaluating their advantages and remaining limitations. Herein, various treatment techniques are covered, including adsorption, reduction/oxidation, ion exchange, membrane separation technologies, solvents extraction, chemical precipitation/co-precipitation, coagulation-flocculation, flotation, and bioremediation. A particular emphasis is placed on full recovery of the captured metal pollutants in various reusable forms as metal-based VAPs, mainly as solid precipitates, which is a powerful tool that offers substantial enhancement of the remediation processes' sustainability and cost-effectiveness. At the end, we have identified some prospective research directions for future work on this topic, while presenting some recommendations that can promote sustainability and economic feasibility of the existing treatment technologies.