Porous hollow Ag/Ag2S/Ag3PO4 nanocomposites as highly efficient heterojunction photocatalysts for the removal of antibiotics under simulated sunlight irradiation

Magnetic composite photocatalyst NiFe₂O₄/ZnIn₂S₄/biochar for efficient removal of antibiotics in water under visible light: Performance, mechanism and pathway

The widespread presence of antibiotics in aquatic environments, resulting from excessive use and accumulation, has raised significant concerns. A NiFe₂O₄/ZnIn₂S₄/Biochar (NFO/ZIS/BC) magnetic nanocomposite was successfully synthesized, demonstrating significantly enhanced electron-hole separation properties. Comprehensive investigations were conducted to evaluate the impact of various parameters, including catalyst mass, pH, and the presence of co-existing ions on the composite's performance. The nanoparticles of NiFe₂O₄ (NFO) and ZnIn₂S₄ (ZIS) were found to improve the surface stability and sulfamethoxazole removal capabilities of porous biochar, while also demonstrating high total organic carbon removal efficiencies. •O₂⁻ and h⁺ were identified as the predominant reactive oxygen species (ROS) in NFO/ZIS/BC-4 during the degradation process. The degradation outcomes of sulfamethoxazole under natural sunlight and water conditions were consistent with laboratory findings, affirming the robust applicative potential of NFO/ZIS/BC. Density functional theory (DFT) calculations were performed to elucidate the photocatalytic mechanism and identify potential intermediate products. Additionally, the types of heterojunctions present in the system were characterized and discussed. After multiple iterations, NFO/ZIS/BC-4 maintained effective photodegradation capabilities through five cycles. This study presents an effective method for the treatment of antibiotics in aquatic environments, offering significant potential for environmental applications.

Formulation of silver phosphate/graphene/silica nanocomposite for enhancing the photocatalytic degradation of trypan blue dye in aqueous solution

Photocatalytic degradation of several harmful organic compounds has been presented as a potential approach to detoxify water in recent decades. Trypan Blue (TB) is an acidic azo dye used to distinguish live cells from dead ones and it's classified as a carcinogenic dye. In this study, silver phosphate (Ag3PO4) nanoparticles and novel Ag3PO4/graphene/SiO2 nanocomposite have been successfully prepared via simple precipitation method. Afterward, their physical properties, chemical composition, and morphology have been characterized using SEM, EDS, TEM, SAED, BET, XRD, FTIR and UV-VIS spectroscopy. The specific surface area of Ag3PO4 and Ag3PO4/G/SiO2 nanocomposite were reported to be 1.53 and 84.97 m2/g, respectively. The band gap energy of Ag3PO4 and Ag3PO4/G/SiO2 nanocomposite was measured to be 2.4 and 2.307 eV, respectively. Photocatalytic degradation of Trypan blue (TB) was studied at different parameters such as pH, catalyst dosage, initial concentration, and contact time. The results showed that, at initial dye concentration of 20 ppm, pH = 2, and using 0.03 g of Ag3PO4/G/SiO2 as a photocatalyst, the degradation percent of TB dye in the aqueous solution was 98.7% within 10 min of light exposure. Several adsorption isotherms such as Langmuir, Freundlich, and Temkin adsorption isotherms have been tested in addition to the photocatalytic degradation kinetics. Both catalysts were found to follow the Langmuir isotherm model and pseudo-second-order kinetic model. Finally, the possible photocatalytic performance mechanism of Ag3PO4/G/SiO2 was proposed.

Fabrication and characterization of new Fe3O4@SiO2@TiO2-CPTS-HBAP (FST-CH) nanoparticles for photocatalytic degradation and adsorption removal of rhodamine B dye in the aquatic environment

In this study, Fe3O4@SiO2@TiO2-CPTS-HBAP (FST-CH) nanoparticle was prepared for the simultaneous adsorption and photocatalytic degradation of aromatic chemical pollutants (Rhodamine B dye) in aqueous solution. FST-CH nanoparticle was characterized using scanning electron microscopy (SEM), Fourier-transform infrared spectroscopy (FTIR), Energy Dispersive X-Ray (EDX) Fluorescence Spectrometer and X-Ray Diffraction (XRD) spectroscopy. The photocatalytic activity of rhodamine B dye (RhB) was evaluated with a Kerman UV 8/18 vertical roller photoreactor. About 56% of RhB in aqueous medium was adsorbed by FST-CH nanoparticles with only 45 min of stirring in the dark, and about 77.01% was degraded or converted to other structures under the photoreactor for 120 min. The photocatalytic degradation of RhB (apparent rate constant: 0.0026 mg dm-3 min-1) occurred by a pseudo-second order reaction. In addition, the recovery of the prepared magnetic FST-CH nanoparticle by an external magnetic field, exhibiting good magnetic response and reusability, shows that the obtained magnetic FST-CH nanoparticle is stable and maintains high degradation ratio and catalyst recovery even after four cycles. Thus, the prepared FST-CH nanoparticle can be highly recommended for its use in potential applications of water decontamination.

InVO4 nanosheets decorated with ZnWO4 nanorods: A novel composite and its enhanced photocatalytic performance under solar light

InVO₄ is the most attractive inorganic new-generation material for advanced scientific research, especially in the fields of energy and environmental science. In theory, this stable, non-toxic, energy-efficient metal vanadate semiconductor is expected to exhibit significant catalytic activity owing to its narrow bandgap energy. However, this has not been achieved in practice because of its inherent defects in terms of the separation and migration of charge carriers. In fact, the exploration of this material is still in its infancy, and more research is needed to improve its efficiency and speed up its commercialization. Band gap engineering using heterojunction formation offers better results than other methods, such as morphological variations and doping efforts. In this context, the present study offers a significant solution substantiated by experimental results. This includes the successful synthesis of a novel nanocomposite of InVO₄ nanosheets decorated with ZnWO₄ nanorods with a unique improved light absorption ability. Three composites with 26.48-33.85 nm crystal sizes and 11.74-19.98 m²/g surface area were prepared with tailor-made bandgap energies in the range of 2.52-2.97 eV. Furthermore, they produced high photoexcitation currents with low EIS resistance with respect to their constituents. The as-prepared InVO₄-based novel catalyst almost completely (98.33%) decomposed tetracycline (TC) antibiotic in just 90 min, proving its high efficacy. The enhanced performance of the novel catalyst is 7.6 times that of InVO₄ and 10 times that of ZnWO₄. Moreover, the catalyst intake was significantly small (15 mg/100 mL TC solution).

Strategic insight into enhanced photocatalytic remediation of pharmaceutical contaminants using spherical CdO nanoparticles in visible light region

The sustainable control of pharmaceutical micropollutants in water and wastewater environments is a great challenge in the 21st century. To address these issues, unique CdO nanoparticles (NPs) were synthesized using a facile hydrothermal approach and investigated for photocatalytic control of the antibiotic tetracycline, multidrug-resistant bacteria (MDRB), and total coliform in the wastewater effluent. The NPs were characterized using a range of techniques and it exhibited a spherical-like crystal structure with a mean size of 40 nm. The vibrational stretching mode of 1419 cm^-1 confirmed the formation of Cd-O (M - O). The synthesis protocol formed smoother surfaces and 1.88 eV band gap energy of CdO NPs, inducing excellent photocatalytic activity under visible LED light (blue and white) irradiation. The optimal catalyst dose and pH were 100 mg/L and 8-9, respectively. Blue light proved more effective than white light, resulting in 28% higher efficiency (93 ± 0.47%) in tetracycline degradation than white light under an identical intensity (20 mW/cm²). White light required a four-fold higher light intensity (80 mW/cm²) than blue light to induce comparable photocatalytic MDRB inactivation. Bacterial cell lysis by the photocatalytic treatment was confirmed by transmission electron microscopy (TEM). The used catalyst was easily recovered by 5 min of centrifugation and re-used without any noticeable change in the photocatalytic decomposition. The trapping experiment revealed that the CdO-based NPs contributed primarily to the generation of •O₂^- and •OH radicals (Type I), but the •O₂^- radicals were the dominant reactive oxygen species (ROS) in the photocatalytic process.

Nanohybrid catalysts with porous structures for environmental remediation through photocatalytic degradation of emerging pollutants

Water supplies have been seriously challenged by new emerging pollutants, which are difficult to remove by traditional wastewater treatment. Thus, new technologies such as catalytic advanced oxidation processes have merged as suitable solutions; however, the drawbacks of typical catalysts limit their application. To overcome this issue, new materials with enhanced textural properties have been developed, showing that their porosity and chemical nature influence their potential as a catalyst. Herein, the recent progress in highly porous catalysts and their suitable deployment to effectively nano-remediate the polluted environmental matrices are reviewed in detail. First, following a brief introduction, several environmental pollutants of emerging concerns from different sectors, including pharmaceutical residues, endocrine-disrupting chemicals (EDCs), pesticides, and hazardous dyes are also introduced with relevant examples. To effectively tackle the sustainable remediation of emerging pollutants, this work also focuses on the multifunctional features of nanohybrid porous materials that act as catalysts constructs to degrade emerging pollutants. The influence of surface reactive centers, stability, bandgap energies, light absorption capacities, and pollutants adsorption capacities are also discussed. Successful examples of the employment of nanohybrid porous catalysts for the degradation of pharmaceutical pollutants, EDCs, pesticides, and hazardous dyes are summarized. Finally, some challenges faced by nanohybrid porous materials to achieve their potential application as advanced catalysts for environmental remediation have been identified and presented herein.

Integration of biochar into Ag3PO4/α-Fe2O3 heterojunction for enhanced reactive oxygen species generation towards organic pollutants removal

A biochar (BC) harbored Ag₃PO₄/α-Fe₂O₃ type-Ⅰ heterojunction (Ag-Fe-BC) was prepared by a hydrothermal-impregnation method to transfer active center of heterojunctions. The electrochemical and spectroscopic tests demonstrated that BC enhanced the catalytic performance of the heterojunction by enhancing photocurrent, reducing fluorescence intensity, and facilitating separation of electron-hole pairs. The photocatalytic activity showed the Ag-Fe-BC (5:1:3) could degrade Rhodamine B (20 mg/L) by up to 92.7%, which was 3.35 times higher than Ag₃PO₄/α-Fe₂O₃. Tetracycline and ciprofloxacin (20 mg/L) were degraded efficiently by 58.3% and 79.4% within 2 h, respectively. Electron paramagnetic resonance and scavenging experiments confirmed the major reactive oxygen species (ROS) consisted of singlet oxygen (¹O₂) and superoxide (·O₂^-). Excellent RhB adsorption and electrons capturing capacity of BC facilitated electron-hole pairs separation and ROS transferring to target organics followed by elevated degradation. Thus, a facile method was proposed to synthesize a highly efficient visible-light responsive photocatalyst for degradation of various organics in water.

Magnetic, thermally stable, and superhydrophobic polyurethane sponge: A high efficient adsorbent for separation of the marine oil spill pollution

Herein, we demonstrated a facile method for the fabrication of magnetic and superhydrophobic polyurethane sponge with water contact angle of 159° as an adsorbent for cleanup the marine oil spill pollution. For this aim, a polyurethane sponge was coated with carbon black (CB), hexagonal boron nitride (h-BN)@Fe₃O₄, and acrylic resin and then characterized by different techniques. Owing to the chemical and thermal stability of h-BN and CB, the modified sponge was stable under corrosive conditions (pH = 1-14 and salt solutions) and at different temperatures (-12 °C-105 °C). In addition to common oils and organic solvents, we also used the real spilled oils containing monoaromatics and polyaromatics in the water surfaces of the Persian Gulf for investigation of adsorption efficiency of sponge in a real condition. The oil adsorption capacity of this sponge was in the range of 64-176 g g^-1. Also, this adsorbent can separate high amount of oil or organic solvents up to 66,400 times of its own weight from the oil-water mixture in a continuous separation. The results confirm that modified sponge can be used more than 20 times for oil spill cleanup without considerable reduction of its adsorption capacity. Consequently, the modified sponge is a promising candidate material for use in a real oil-water separation process.

Oxygen defects-induced charge transfer in Bi7O9I3 for enhancing oxygen activation and visible-light degradation of BPA

Two-dimensional (2D) bismuth-based semiconductors have aroused intensive concern owing to their prominent photocatalytic activity for organic pollutants removal. In this work, a facile strategy for introducing oxygen vacancy in Bi-based oxyiodides (Bi_xO_yI_z) sheet-like architectures to activate molecular oxygen was proposed. The structure, photoelectric properties and visible light (λ > 420 nm) induced photocatalytic activities of these samples for decomposition of bisphenol A (BPA) were systematically characterized and evaluated. The as-prepared Bi₇O₉I₃ with a feeding Bi/I molar ratio of 1:1 exhibited the best photocatalytic activity comparable to those of similarly synthesized Bi₇O₉I₃ with other molar ratios and BiOIO₃ catalysts. The optimal Bi₇O₉I₃ achieved excellent photocatalytic activity with 99.6 % degradation efficiency of BPA within 20 min and superior structural stability with 95.1 % degradation retention over 5 cycling tests. In addition, the resulting Bi₇O₉I₃ sample displayed a high mineralization efficiency of BPA. Importantly, the plenty of oxygen vacancies (V_os) exsiting in Bi₇O₉I₃ played the dominant role in both accelerating electron transfer and activating molecular oxygen to facilitate the generation of superoxide radical (O₂^·-) and singlet oxygen (¹O₂), thereby proceeding oxidative degradation of BPA molecules during photoreactions. The efforts and attempts are also extendable to synthesis other 2D photocatalysts, providing potential for effective charge-carrier separation and molecular oxygen activation.

Investigation of photoelectric behaviors of silver sulfide particles in different surroundings

Silver sulfide (Ag2S) is a traditional semiconductor material, however, the photoelectric properties of Ag2S particles under different environments are still lacking. In this paper, we reported the preparation of Ag2S particles and their photoelectric properties under different environments. Results showed that the photoelectric performance of Ag2S particles was closely related to the environment. It was found that a copper phthalocyanine coating could improve the light response, the mixture of alcohols and air could increase the photoconductivity, and the mixture of carbon disulfide and air could decrease the photoconductivity. The mechanism of the effect of various experimental conditions on photoelectric properties was also discussed.

Photocatalytic degradation of tetracycline by metal-organic frameworks modified with Bi2WO6 nanosheet under direct sunlight

Porous metal-organic frameworks (MOFs) with visible-light response have attracted much attention in the field of environmental purification and solar energy conversion. In this study, MIL-100(Fe) was modified with Bi₂WO₆ nanosheets by a facile hydrothermal method to fabricate a photocatalyst with direct Z-scheme heterojunction. When treating the tetracycline (TC) solution under natural sunlight, 12 wt%MIL-100(Fe)/Bi₂WO₆ obtained the highest apparent rate constant of (6.59 ± 0.52)✕10^-3 L mg^-1 min^-1, which was 16.1 and 3.9 times than that of pristine MIL-100(Fe) and Bi₂WO₆, respectively. In addition to explore the feasibility of sunlight-activated MIL-100(Fe)/Bi₂WO₆ to remove TC under various conditions, the degradation intermediates and their possible transformation pathway were provided with the aid of three-dimensional excitation-emission matrix spectra and liquid chromatography-mass spectrometry system. The results of Escherichia coli culture demonstrated that the biotoxicity variation of TC solution would first increase and then decrease with the photodegradation time. Ultimately, based on the results of bandgap calculation, radicals trapping and charge flow tracking experiments, the direct Z-scheme heterojunction between MIL-100(Fe) and Bi₂WO₆ nanosheets was confirmed and the photocatalytic mechanism for TC degradation was rationally proposed. This work enriched MOFs-based heterojunction photocatalysts and provided a promising method to eliminate hazardous TC from aqueous solution.

Hybrid Inorganic-Organic Visible-Light-Driven Microrobots Based on Donor-Acceptor Organic Polymer for Degradation of Toxic Psychoactive Substances

Light-driven microrobots based on organic semiconductors have received tremendous attention in the past few years due to their unique properties, such as ease of reactivity tunability, band-gap modulation, and low cost. However, their fabrication with defined morphologies is a very challenging task that results in amorphous microrobots with poor motion efficiencies. Herein, we present hybrid inorganic-organic photoactive microrobots with a tubular shape and based on the combination of a mesoporous silica template with an active polymer containing thiophene and triazine units (named as Tz-Th microrobots). Owing to their well-defined tubular structure, such Tz-Th microrobots showed efficient directional motion under fuel-free conditions. Depending on the accumulation of the polymer coating, these microdevices also exhibited stand-up and rotation motion. As a proof-of-concept, we use these hybrid microrobots for the capture and degradation of toxic psychoactive drugs commonly found in wastewater effluents such as methamphetamine derivatives. We found that the microrobots were able to decompose the drug into small organic fragments after 20 min of visible light irradiation, reaching total intermediates removal after 2 h. Therefore, this approach represents a versatile and low-cost strategy to fabricate structured organic microrobots with efficient directional motion by using inorganic materials as the robot chassis, thereby maintaining the superior photocatalytic performance usually associated with such organic polymers.

Heterojunction photocatalysts for degradation of the tetracycline antibiotic: a review

Antibiotic pollution is a major health issue inducing antibiotic resistance and the inefficiency of actual drugs, thus calling for improved methods to clean water and wastewater. Here we review the recent development of heterojunction photocatalysis and application in degrading tetracycline. We discuss mechanisms for separating photogenerated electron-hole pairs in different heterojunction systems such as traditional, p-n, direct Z-scheme, step-scheme, Schottky, and surface heterojunction. Degradation pathways of tetracycline during photocatalysis are presented. We compare the efficiency of tetracycline removal by various heterojunctions using quantum efficiency, space time yield, and figures of merit. Implications for the treatment of antibiotic-contaminated wastewater are discussed.