1
|
Al-Obaidi Q, Selem NY, Al-Dahhan MH. Emulsion liquid membrane (ELM) enhanced by nanoparticles and ionic liquid for extracting vanadium ions from wastewater. ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH INTERNATIONAL 2024; 31:48576-48589. [PMID: 39033473 DOI: 10.1007/s11356-024-34273-y] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 01/18/2024] [Accepted: 07/02/2024] [Indexed: 07/23/2024]
Abstract
Emulsion liquid membrane (ELM) stands out as an extraction process that has drawn much attention due to its promising prospects in industrial wastewater treatment technology. Nevertheless, the pivotal challenge is to reach high membrane stability to overcome the obstacle of applying ELM at the industrial scale. In this study, ELM was boosted by using nanoparticles (superparamagnetic iron oxide (Fe2O3)) in the stripping phase (W1) and ionic liquid (1-methyl-3-octyl-imidazolium-hexafluorophosphate [OMIM][PF6) in the oil phase (O) for recovering/extracting vanadium from synthetic wastewater to near completion and at the same time enhancing emulsion stability to be appropriate for industrial application. The vanadium recovery/extraction percentage has been raised significantly in 3 min to 99.6% when adding 0.01% (w/w) Fe2O3 NPs (20 to 50 nm in size) in the internal phase (W1) and 5% (v/v) [OMIM]PF6 ionic liquid in the oil phase (O). Also, the emulsion stability was considerably improved, and the leakage percentage was reduced to 16% after 3 days. The results of this study could be used in the future to remove additional heavy metal ions from industrial effluents.
Collapse
Affiliation(s)
- Qusay Al-Obaidi
- Chemical Engineering Department, University of Technology, Baghdad, Iraq
| | - Nora Yehia Selem
- Chemical Engineering Department, Higher Technological Institute, 10th of Ramadan City, Egypt.
| | - Muthanna H Al-Dahhan
- Multiphase Flow and Reactors Engineering & Education Laboratory (mFReel), Linda and Bipin Doshi Department of Chemical and Biochemical Engineering, Missouri University of Science and Technology, Rolla, MO, 65409, USA
- Department of Nuclear Engineering and Radiation Science, Missouri University of Science and Technology, Rolla, MO, 65409, USA
- TechCell, Mohammed VI Polytechnic University, Lot 660, Hay Moulay Rachid 43150, Ben Guerir, Morocco
| |
Collapse
|
2
|
Kazemi D, Yaftian MR. PVDF-HFP-based polymer inclusion membrane functionalized with D2EHPA for the selective extraction of bismuth(III) from sulfate media. Sci Rep 2024; 14:11622. [PMID: 38773177 PMCID: PMC11109169 DOI: 10.1038/s41598-024-62401-8] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/27/2024] [Accepted: 05/16/2024] [Indexed: 05/23/2024] Open
Abstract
This study is the first application of a PVDF-HFP-based polymer inclusion membrane incorporating the poly(vinylidene fluoride-co-hexafluoropropylene) (PVDF-HFP) and di(2-ethylhexyl)phosphoric acid (D2EHPA) as the base polymer and extractant for the extraction of bismuth(III), respectively. It is demonstrated that the PIM comprised of 60 wt% PVDF-HFP and 40 wt% D2EHPA is the most effective in the extraction of bismuth(III) from feed solution containing 20 mg L-1 bismuth(III) and 0.2 mol L-1 sulfate adjusted to pH 1.4. The extracted bismuth(III) ions are back-extracted quantitatively to the receiving solution containing 1 mol L-1 sulfuric acid. The stoichiometry experiments reveal that the Bi: D2EHPA ratio in the bismuth(III) extracted complex is 1:6, and D2EHPA is dimer. Moreover, it is shown that the studied PIM has high selectivity in the extraction of bismuth(III) over other interfering ions such as Mo(VI), Cr(III), Al(III), Fe(III), Ni(II), Zn(II), Cd(II), Co(II), Cu(II), and Mn(II). The interference of Fe(III) is also eliminated by masking with fluoride, leading finally to a nearly pure extraction of bismuth(III).
Collapse
Affiliation(s)
- Davood Kazemi
- Department of Chemistry, Faculty of Science, University of Zanjan, Zanjan, 45371-38791, Iran.
| | - Mohammad Reza Yaftian
- Department of Chemistry, Faculty of Science, University of Zanjan, Zanjan, 45371-38791, Iran.
| |
Collapse
|
3
|
Martínez de la Peña A, Rodríguez de San Miguel E, de Gyves J. MID-FTIR-PLS Chemometric Analysis of Cr(VI) from Aqueous Solutions Using a Polymer Inclusion Membrane-Based Sensor. MEMBRANES 2023; 13:740. [PMID: 37623801 PMCID: PMC10456335 DOI: 10.3390/membranes13080740] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 07/30/2023] [Revised: 08/11/2023] [Accepted: 08/16/2023] [Indexed: 08/26/2023]
Abstract
A partial least squares (PLS) quantitative chemometric method based on the analysis of the mid-Fourier transform infrared spectroscopy (MID-FTIR) spectrum of polymer inclusion membranes (PIMs) used for the extraction of Cr(VI) from aqueous media is developed. The system previously optimized considering the variables membrane composition, extraction time, and pH, is characterized in terms of its adsorption isotherm, distribution coefficient, extraction percent, and enrichment factor. A Langmuir-type adsorption behavior with KL = 2199 cm3/mmol, qmax = 0.188 mmol/g, and 0 < RL < 1 indicates that metal adsorption is favorable. The characterization of the extraction reaction is performed as well, showing a 1:1 Cr(VI):Aliquat 336 ratio, in agreement with solvent extraction data. The principal component analysis (PCA) of the PIMs reveals a complex pattern, which is satisfactorily simplified and related to Cr(VI) concentrations through the use of a variable selection method (iPLS) in which the bands in the ranges 3451-3500 cm-1 and 3751-3800 cm-1 are chosen. The final PLS model, including the 100 wavelengths selected by iPLS and 10 latent variables, shows excellent parameter values with root mean square error of calibration (RMSEC) of 3.73115, root mean square error of cross-validation (RMSECV) of 6.82685, bias of -1.91847 × 10-13, cross-validation (CV) bias of 0.185947, R2 Cal of 0.98145, R2 CV of 0.940902, recovery% of 104.02 ± 4.12 (α = 0.05), sensitivity% of 0.001547 ppb, analytical sensitivity (γ) of 3.8 ppb, γ-1: 0.6 ppb-1, selectivity of 0.0155, linear range of 5.8-100 ppb, limit of detection (LD) of 1.9 ppb, and limit of quantitation (LQ) of 5.8 ppb. The developed PIM sensor is easy to implement as it requires few manipulations and a reduced number of chemical compounds in comparison to other similar reported systems.
Collapse
Affiliation(s)
| | - Eduardo Rodríguez de San Miguel
- Departamento de Química Analítica, Facultad de Química, Universidad Nacional Autónoma de México (UNAM), Ciudad Universitaria, Mexico City 04510, Mexico; (A.M.d.l.P.); (J.d.G.)
| | | |
Collapse
|
4
|
Wang Y, Wang P, Xie H, Tan M, Wang L, Liu Y, Zhang Y. Mechanistic investigation of intensified separation of molybdenum(VI) and vanadium(V) using polymer inclusion membrane electrodialysis. JOURNAL OF HAZARDOUS MATERIALS 2023; 456:131671. [PMID: 37236110 DOI: 10.1016/j.jhazmat.2023.131671] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 03/01/2023] [Revised: 05/17/2023] [Accepted: 05/20/2023] [Indexed: 05/28/2023]
Abstract
The main challenge in separating molybdenum(VI) and vanadium(V) which have similar properties results in great difficulties in the green recycling of hazardous spent catalysts. Here, selective facilitating transport and stripping are integrated into the polymer inclusion membrane electrodialysis process (PIMED) to separate Mo(VI) and V(V) to overcome the complicated co-extraction and stepwise-stripping in conventional solvent extraction. The influences of various parameters, the selective transport mechanism, and respective activation parameters were systematically investigated. Results revealed that the affinity of the Aliquat 36 as the carrier and PVDF-HFP as the base polymer of PIM towards Mo(VI) is stronger than that of V(V), while the strong interaction between Mo(VI) and carrier caused low migration through the membrane. By the combination of adjusting and controlling the electric density and strip acidity, the interaction was destroyed and the transport was facilitated. After optimization, stripping efficiencies of Mo(VI) and V (V) increased from 44.4% to 93.1% and reduced from 31.9% to 1.8%, respectively, while their separation coefficient increased 16.3 times to 333.4. The activation energy, enthalpy and entropy for the transport of Mo(VI) were determined to be 4.846 kJ mol-1, 6.745 kJ mol-1 and - 310.838 J mol-1 K-1, respectively. The present work demonstrates that the separation of similar metal ions could be improved by fine tuning the affinity and interaction between metal ions and the PIM, thus providing new insights into the recycling of similar metal ions from secondary resources.
Collapse
Affiliation(s)
- Yuzhen Wang
- Shandong Engineering Research Centre for Pollution Control and Resource Valorization in Chemical Industry, College of Environment and Safety Engineering, Qingdao University of Science and Technology, 53 Zhengzhou Road, Qingdao 266042, China
| | - Pengfei Wang
- Shandong Engineering Research Centre for Pollution Control and Resource Valorization in Chemical Industry, College of Environment and Safety Engineering, Qingdao University of Science and Technology, 53 Zhengzhou Road, Qingdao 266042, China
| | - Huihui Xie
- Shandong Engineering Research Centre for Pollution Control and Resource Valorization in Chemical Industry, College of Environment and Safety Engineering, Qingdao University of Science and Technology, 53 Zhengzhou Road, Qingdao 266042, China
| | - Ming Tan
- Shandong Engineering Research Centre for Pollution Control and Resource Valorization in Chemical Industry, College of Environment and Safety Engineering, Qingdao University of Science and Technology, 53 Zhengzhou Road, Qingdao 266042, China
| | - Lingyun Wang
- Key Laboratory of Clean Chemical Processing Engineering of Shandong Province, College of Chemical Engineering, Qingdao University of Science and Technology, 53 Zhengzhou Road, Qingdao 266042, China
| | - Yang Liu
- Shandong Engineering Research Centre for Pollution Control and Resource Valorization in Chemical Industry, College of Environment and Safety Engineering, Qingdao University of Science and Technology, 53 Zhengzhou Road, Qingdao 266042, China.
| | - Yang Zhang
- Shandong Engineering Research Centre for Pollution Control and Resource Valorization in Chemical Industry, College of Environment and Safety Engineering, Qingdao University of Science and Technology, 53 Zhengzhou Road, Qingdao 266042, China.
| |
Collapse
|
5
|
Macías M, Rodríguez de San Miguel E. On the Use of Polymer Inclusion Membranes for the Selective Separation of Pb(II), Cd(II), and Zn(II) from Seawater. MEMBRANES 2023; 13:membranes13050512. [PMID: 37233573 DOI: 10.3390/membranes13050512] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 03/30/2023] [Revised: 05/03/2023] [Accepted: 05/09/2023] [Indexed: 05/27/2023]
Abstract
The synthesis and optimization of polymeric inclusion membranes (PIMs) for the transport of Cd(II) and Pb(II) and their separation from Zn(II) in aqueous saline media are presented. The effects of NaCl concentrations, pH, matrix nature, and metal ion concentrations in the feed phase are additionally analyzed. Experimental design strategies were used for the optimization of PIM composition and evaluating competitive transport. Synthetic seawater with 35% salinity, commercial seawater collected from the Gulf of California (Panakos®), and seawater collected from the beach of Tecolutla, Veracruz, Mexico, were employed. The results show an excellent separation behavior in a three-compartment setup using two different PIMs (Aliquat 336 and D2EHPA as carriers, respectively), with the feed phase placed in the central compartment and two different stripping phases placed on both sides: one solution with 0.1 mol/dm3 HCl + 0.1 mol/dm3 NaCl and the other with 0.1 mol/dm3 HNO3. The selective separation of Pb(II), Cd(II), and Zn(II) from seawater shows separation factors whose values depend on the composition of the seawater media (metal ion concentrations and matrix composition). The PIM system allows S(Cd) and S(Pb)~1000 and 10 < S(Zn) < 1000, depending on the nature of the sample. However, values as high as 10,000 were observed in some experiments, allowing an adequate separation of the metal ions. Analyses of the separation factors in the different compartments in terms of the pertraction mechanism of the metal ions, PIMs stabilities, and preconcentration characteristics of the system are performed as well. A satisfactory preconcentration of the metal ions was observed after each recycling cycle.
Collapse
Affiliation(s)
- Mariana Macías
- Departamento de Química Analítica, Facultad de Química, Universidad Nacional Autónoma de México (UNAM), Ciudad Universitaria, Mexico City 04510, Mexico
| | - Eduardo Rodríguez de San Miguel
- Departamento de Química Analítica, Facultad de Química, Universidad Nacional Autónoma de México (UNAM), Ciudad Universitaria, Mexico City 04510, Mexico
| |
Collapse
|
6
|
Baklouti L, Larchet C, Hamdi A, Hamdi N, Baraket L, Dammak L. Research on Membranes and Their Associated Processes at the Université Paris-Est Créteil: Progress Report, Perspectives, and National and International Collaborations. MEMBRANES 2023; 13:252. [PMID: 36837755 PMCID: PMC9959974 DOI: 10.3390/membranes13020252] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 12/18/2022] [Revised: 02/12/2023] [Accepted: 02/14/2023] [Indexed: 06/18/2023]
Abstract
Research on membranes and their associated processes was initiated in 1970 at the University of Paris XII/IUT de Créteil, which became in 2010 the University Paris-Est Créteil (UPEC). This research initially focused on the development and applications of pervaporation membranes, then concerned the metrology of ion-exchange membranes, then expanded to dialysis processes using these membranes, and recently opened to composite membranes and their applications in production or purification processes. Both experimental and fundamental aspects have been developed in parallel. This evolution has been reinforced by an opening to the French and European industries, and to the international scene, especially to the Krasnodar Membrane Institute (Kuban State University-Russia) and to the Department of Chemistry, (Qassim University-Saudi Arabia). Here, we first presented the history of this research activity, then developed the main research axes carried out at UPEC over the 2012-2022 period; then, we gave the main results obtained, and finally, showed the cross contribution of the developed collaborations. We avoided a chronological presentation of these activities and grouped them by theme: composite membranes and ion-exchange membranes. For composite membranes, we have detailed three applications: highly selective lithium-ion extraction, bleach production, and water and industrial effluent treatments. For ion-exchange membranes, we focused on their characterization methods, their use in Neutralization Dialysis for brackish water demineralization, and their fouling and antifouling processes. It appears that the research activities on membranes within UPEC are very dynamic and fruitful, and benefit from scientific exchanges with our Russian partners, which contributed to the development of strong membrane activity on water treatment within Qassim University. Finally, four main perspectives of this research activity were given: the design of autonomous and energy self-sufficient processes, refinement of characterization by Electrochemical Scanning Microscopy, functional membrane separators, and green membrane preparation and use.
Collapse
Affiliation(s)
- Lassaad Baklouti
- Department of Chemistry, College of Sciences and Arts at Ar Rass, Qassim University, Ar Rass 51921, Saudi Arabia
| | - Christian Larchet
- ICMPE, CNRS, Université Paris-Est Créteil, UMR 7182, 2 Rue Henri Dunant, 94320 Thiais, France
| | - Abdelwaheb Hamdi
- Department of Chemistry, College of Sciences and Arts at Ar Rass, Qassim University, Ar Rass 51921, Saudi Arabia
| | - Naceur Hamdi
- Department of Chemistry, College of Sciences and Arts at Ar Rass, Qassim University, Ar Rass 51921, Saudi Arabia
| | - Leila Baraket
- Department of Pharmaceutical Chemistry, Faculty of Clinical Pharmacy, Al Baha University, Al Baha P.O. Box 1988, Saudi Arabia
| | - Lasâad Dammak
- ICMPE, CNRS, Université Paris-Est Créteil, UMR 7182, 2 Rue Henri Dunant, 94320 Thiais, France
| |
Collapse
|
7
|
Szczepański P. Comparison of Kinetic Models Applied for Transport Description in Polymer Inclusion Membranes. MEMBRANES 2023; 13:236. [PMID: 36837739 PMCID: PMC9967031 DOI: 10.3390/membranes13020236] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 12/20/2022] [Revised: 01/28/2023] [Accepted: 02/14/2023] [Indexed: 06/18/2023]
Abstract
Five mathematical models for transport description in polymer inclusion membranes (PIMs) were presented and compared via regression analysis. The applicability of the models was estimated through the examination of experimental data of Zn(II), Cd(II), Pb(II), and Cu(II) ions transported by typical carriers. In four kinetic models, a change in the feed and stripping solution volume was taken into account. The goodness of fit was compared using the standard error of the regression, Akaike information criterion (AIC), Bayesian (Schwarz) information criterion (BIC), and Hannan-Quinn information criterion (HQC). The randomness distribution in the data was confirmed via a nonparametric runs test. Based on these quantities, appropriate models were selected.
Collapse
Affiliation(s)
- Piotr Szczepański
- Faculty of Chemistry, Nicolaus Copernicus University, 7 Gagarina Street, 87-100 Toruń, Poland
| |
Collapse
|
8
|
Soozanipour A, Ejeian F, Boroumand Y, Rezayat A, Moradi S. Biotechnological advancements towards water, food and medical healthcare: A review. CHEMOSPHERE 2023; 312:137185. [PMID: 36368538 DOI: 10.1016/j.chemosphere.2022.137185] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 07/16/2022] [Revised: 10/21/2022] [Accepted: 11/05/2022] [Indexed: 06/16/2023]
Abstract
The global health status is highly affected by the growing pace of urbanization, new lifestyles, climate changes, and resource exploitation. Modern technologies pave a promising way to deal with severe concerns toward sustainable development. Herein, we provided a comprehensive review of some popular biotechnological advancements regarding the progress achieved in water, food, and medicine, as the most substantial fields related to public health. The emergence of novel organic/inorganic materials has brought about significant improvement in conventional water treatment techniques, anti-fouling approaches, anti-microbial agents, food processing, biosensors, drug delivery systems, and implants. Particularly, a growing interest has been devoted to nanomaterials and their application for developing novel structures or improving the characteristics of standard components. Also, bioinspired materials have been widely used to improve the performance, efficiency, accuracy, stability, safety, and cost-effectiveness of traditional systems. On the other side, the fabrication of innovative devices for precisely monitoring and managing various ecosystem and human health issues is of great importance. Above all, exceptional advancements in designing ion-selective electrodes (ISEs), microelectromechanical systems (MEMs), and implantable medical devices have altered the future landscape of environmental and biomedical research. This review paper aimed to shed light on the wide-ranging materials and devices that have been developed for health applications and mainly focused on the impact of nanotechnology in this field.
Collapse
Affiliation(s)
- Asieh Soozanipour
- Department of Biotechnology, Faculty of Biological Science and Technology, University of Isfahan, Isfahan, 81746-73441, Iran
| | - Fatemeh Ejeian
- Department of Animal Biotechnology, Cell Science Research Center, Royan Institute for Biotechnology, ACECR, Isfahan, Iran.
| | - Yasaman Boroumand
- Department of Biotechnology, Faculty of Biological Science and Technology, University of Isfahan, Isfahan, 81746-73441, Iran
| | - Azam Rezayat
- Department of Biotechnology, Faculty of Biological Science and Technology, University of Isfahan, Isfahan, 81746-73441, Iran; Department of Chemistry, Faculty of Science, Lorestan University, Khorramabad, 68151-44316, Iran
| | - Sina Moradi
- School of Chemical Engineering, University of New South Wales, Sydney, 2052, Australia; Artificial Intelligence Centre of Excellence (AI CoE), NCSI Australia, Sydney, NSW, 2113, Australia.
| |
Collapse
|
9
|
Ncib S, Chibani A, Barhoumi A, Larchet C, Dammak L, Elaloui E, Bouguerra W. Separation of copper and nickel from synthetic wastewater by polymer inclusion membrane containing di(2-ethylhexyl)phosphoric acid. Polym Bull (Berl) 2022. [DOI: 10.1007/s00289-022-04634-z] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/24/2022]
|
10
|
Manzoor A, Masood Siddiqi H, Shah A. Development of sulphonated co-polyimide based sensor for metal ions detection in aqueous media. INORG CHEM COMMUN 2022. [DOI: 10.1016/j.inoche.2022.110088] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/05/2022]
|
11
|
Kaczorowska MA. The Use of Polymer Inclusion Membranes for the Removal of Metal Ions from Aqueous Solutions-The Latest Achievements and Potential Industrial Applications: A Review. MEMBRANES 2022; 12:membranes12111135. [PMID: 36422127 PMCID: PMC9695490 DOI: 10.3390/membranes12111135] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 09/30/2022] [Revised: 11/08/2022] [Accepted: 11/09/2022] [Indexed: 05/12/2023]
Abstract
The growing demand for environmentally friendly and economical methods of removing toxic metal ions from polluted waters and for the recovery of valuable noble metal ions from various types of waste, which are often treated as their secondary source, has resulted in increased interest in techniques based on the utilization of polymer inclusion membranes (PIMs). PIMs are characterized by many advantages (e.g., the possibility of simultaneous extraction and back extraction, excellent stability and high reusability), and can be adapted to the properties of the removed target analyte by appropriate selection of carriers, polymers and plasticizers used for their formulation. However, the selectivity and efficiency of the membrane process depends on many factors (e.g., membrane composition, nature of removed metal ions, composition of aqueous feed solution, etc.), and new membranes are systematically designed to improve these parameters. Numerous studies aimed at improving PIM technology may contribute to the wider use of these methods in the future on an industrial scale, e.g., in wastewater treatment. This review describes the latest achievements related to the removal of various metal ions by PIMs over the past 3 years, with particular emphasis on solutions with potential industrial application.
Collapse
Affiliation(s)
- Małgorzata A Kaczorowska
- Faculty of Chemical Technology and Engineering, Bydgoszcz University of Science and Technology, 3 Seminaryjna Street, 85326 Bydgoszcz, Poland
| |
Collapse
|
12
|
Khan A, Ali Shah SF, Majeed K, Hameed I, Najam M, Hasan M, Ullah M, Khan MS, Ahmad Z, Akhtar MS. Polymeric membranes for environmental remediation: A product space model perspective. CHEMOSPHERE 2022; 304:135236. [PMID: 35688204 DOI: 10.1016/j.chemosphere.2022.135236] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 04/24/2022] [Revised: 05/27/2022] [Accepted: 06/02/2022] [Indexed: 06/15/2023]
Abstract
The development of polymeric membranes from polymers such as polystyrene (PS), polyvinylchloride (PVC), and their associated family has brought great momentum to the environmental remediation universe, mainly due to their surprisingly diverse and multi-purpose nature. Their usage has surged 20 times in the last half-century and is likely to double again in the coming 20 years. As a result, the polymeric materials economy and commercialization of research become increasingly important as a possible option for a country to boost prosperity while decreasing its reliance on limited raw resources and mitigating negative externalities. This transformation demands a systematic strategy, which involves progress beyond improving the existing models and building new avenues for collaboration. In this work, a sophisticated system, i.e., product space model (PSM), has been presented, explicitly appraising the opportunity space for United Kingdom, Italy, Poland, India, Canada, Indonesia, Brazil, Saudi Arabia, Russia and Colombia for their potential future industrialization and commercialization of polymeric membranes for environmental remediation. The results revealed that UK, Italy, Poland and India are at advantageous positions owing to their close proximity of (distance<2) and their placement in Parsimonious policy, which is the most desired quadrant of Policy Map of PSM, Canada and Indonesia have medium level opportunities, while Russia and Saudi Arabia have opportunities with more challenges to fully exploit the unexploited polymers products in terms of membranes for environmental remediation and prove favorable for export diversification, sustainable economic growth, and commercialization.
Collapse
Affiliation(s)
- Amin Khan
- State Key Laboratory of Silicon Materials, School of Materials Science and Engineering, Zhejiang University, Hangzhou, 310027, China.
| | | | - Khaliq Majeed
- Department of Chemical Engineering, COMSATS University Islamabad (CUI), Lahore Campus, Defense Road, Off Raiwind Road, Lahore, Pakistan.
| | - Iqra Hameed
- School of Materials Science and Engineering, Zhejiang University, Hangzhou, 310027, China.
| | - Mohsin Najam
- State Key Laboratory of Chemical Engineering, College of Chemical and Biological Engineering, Zhejiang University, Hangzhou, 310027, China.
| | - Mudassir Hasan
- College of Engineering, Department of Chemical Engineering, King Khalid University, Abha, 61411, Saudi Arabia.
| | - Mansoor Ullah
- Department of Management Sciences, University of Chitral, 17200, KPK, Pakistan.
| | - Mohd Shariq Khan
- Department of Chemical Engineering, Dhofar University, Salalah, 211, Oman.
| | - Zubair Ahmad
- School of Chemical Engineering, Yeungnam University, Gyeongsan, 712-749, Republic of Korea.
| | - Muhammad Saeed Akhtar
- School of Chemical Engineering, Yeungnam University, Gyeongsan, 712-749, Republic of Korea.
| |
Collapse
|
13
|
Tuncay G, Keskin B, Türken T, Vatanpour V, Koyuncu I. Development of braid reinforced hollow fiber membranes as both ultrafiltration and nanofiltration membranes: Effect of pore forming additive on structure and performance. J Appl Polym Sci 2022. [DOI: 10.1002/app.53098] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/07/2022]
Affiliation(s)
- Gizem Tuncay
- Environmental Engineering Department Istanbul Technical University Istanbul Turkey
- National Research Center on Membrane Technologies Istanbul Technical University Istanbul Turkey
| | - Başak Keskin
- Environmental Engineering Department Istanbul Technical University Istanbul Turkey
- National Research Center on Membrane Technologies Istanbul Technical University Istanbul Turkey
| | - Türker Türken
- Environmental Engineering Department Istanbul Technical University Istanbul Turkey
- National Research Center on Membrane Technologies Istanbul Technical University Istanbul Turkey
| | - Vahid Vatanpour
- Environmental Engineering Department Istanbul Technical University Istanbul Turkey
- National Research Center on Membrane Technologies Istanbul Technical University Istanbul Turkey
- Department of Applied Chemistry, Faculty of Chemistry Kharazmi University Tehran Iran
| | - Ismail Koyuncu
- Environmental Engineering Department Istanbul Technical University Istanbul Turkey
- National Research Center on Membrane Technologies Istanbul Technical University Istanbul Turkey
| |
Collapse
|
14
|
Zeng L, Yi Q, Peng X, Huang Z, Van der Bruggen B, Zhang Y, Kuang Y, Ma Y, Tang K. Modelling and optimization of a new complexing retardant-enhanced polymer inclusion membrane system for highly selective separation of Zn2+ and Cu2+. Sep Purif Technol 2022. [DOI: 10.1016/j.seppur.2022.121056] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/30/2022]
|
15
|
Zunita M, Hastuti R, Alamsyah A, Kadja GT, Khoiruddin K, Kurnia KA, Yuliarto B, Wenten I. Polyionic liquid membrane: Recent development and perspective. J IND ENG CHEM 2022. [DOI: 10.1016/j.jiec.2022.06.027] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/21/2023]
|
16
|
Stable ionic liquid-based polymer inclusion membranes for lithium and magnesium separation. Sep Purif Technol 2022. [DOI: 10.1016/j.seppur.2022.120626] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/21/2022]
|
17
|
Bahrami S, Dolatyari L, Shayani‐Jam H, Yaftian MR. Membrane extraction of V(V) by an oleic acid plasticized poly(vinyl chloride)/Aliquat® 336 polymer inclusion membrane. J Appl Polym Sci 2022. [DOI: 10.1002/app.52434] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/05/2022]
Affiliation(s)
- Salar Bahrami
- Department of Chemistry, Faculty of Science The University of Zanjan Zanjan Iran
| | - Leila Dolatyari
- Department of Chemistry Zanjan Branch, Islamic Azad University Zanjan Iran
| | - Hassan Shayani‐Jam
- Department of Chemistry, Faculty of Science The University of Zanjan Zanjan Iran
| | | |
Collapse
|
18
|
Advanced Functionalized CeO 2/Al 2O 3 Nanocomposite Sensor for Determination of Opioid Medication Tramadol Hydrochloride in Pharmaceutical Formulations. NANOMATERIALS 2022; 12:nano12081373. [PMID: 35458081 PMCID: PMC9025318 DOI: 10.3390/nano12081373] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 03/25/2022] [Revised: 04/11/2022] [Accepted: 04/13/2022] [Indexed: 01/22/2023]
Abstract
BACKGROUND The exceptional characteristics of cerium oxide (CeO2) and aluminum oxide (Al2O3) nanoscales have inspired significant attention to those nanocomposites as possible electroactive resources for applications of sensing and biosensing. METHODS In this research, an innovative new factionalized CeO2/Al2O3 nanocomposite membrane sensor was presented to assess tramadol hydrochloride (TRD) in marketable products. RESULTS Tramadol-phosphomolybdate (TRD-PM) was formed by mixing tramadol hydrochloride and phosphomolybdic acid (PMA) in the attendance of polymeric matrix and o-nitrophenyloctyl ether solvent mediator. With 1.0 × 10-10-1.0 × 10-2 mol L-1 as a range of linearity and EmV = (57.567 ± 0.2) log [TRD] + 676.29 as a regression equation, the functionalized sensor using TRD-PM-CeO2/Al2O3 nanocomposite showed great selectivity and sensitivity for the discriminating and measurement of TRD. Using the regression equation EmV = (52.143 ± 0.4) log [TRD] + 431.45, the unmodified coated wire sensor of TRD-PM, on the other hand, showed a Nernstian response between 1.0 × 10-6 and 1.0 × 10-2 mol L-1, Using the methodology's specified guidelines, the proposed improved potentiometric system was validated against several criteria. CONCLUSION The suggested method is suitable for the determination of TRD in its products.
Collapse
|
19
|
Kazemi D, Yaftian MR. Selective transport-recovery of bismuth(III) by a polymer inclusion membrane containing polyvinyl chloride base polymer and bis(2-ethylhexyl)phosphoric acid. Sep Purif Technol 2022. [DOI: 10.1016/j.seppur.2021.120375] [Citation(s) in RCA: 2] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/22/2023]
|
20
|
García-Beleño J, Rodríguez de San Miguel E. Optimization of Cr(III) transport in a polymer inclusion membrane system through experimental design strategies. CHEMICAL PAPERS 2022. [DOI: 10.1007/s11696-021-02031-w] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 11/29/2022]
|
21
|
León G, Gómez E, Miguel B, Hidalgo AM, Gómez M, Murcia MD, Guzmán MA. Feasibility of Adsorption Kinetic Models to Study Carrier-Mediated Transport of Heavy Metal Ions in Emulsion Liquid Membranes. MEMBRANES 2022; 12:membranes12010066. [PMID: 35054592 PMCID: PMC8778270 DOI: 10.3390/membranes12010066] [Citation(s) in RCA: 8] [Impact Index Per Article: 4.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 12/06/2021] [Revised: 12/29/2021] [Accepted: 12/31/2021] [Indexed: 01/25/2023]
Abstract
Emulsion liquid membranes have been successfully used for the removal of different types of organic and inorganic pollutants by means of carrier-mediated transport mechanisms. However, the models that describe the kinetics and transport of such mechanisms are very complex due to the high number of model parameters. Starting from an analysis of the similarity between the elemental mechanisms of carrier-mediated transport in liquid membranes and of transport in adsorption processes, this paper presents an experimental analysis of the possibility of applying kinetic and mechanistic models developed for adsorption to carrier-mediated transport in emulsion liquid membranes. We study the removal of a target species, in this case, Cu(II), by emulsion liquid membranes containing membrane phase solutions of benzoylacetone (carrier agent), Span 80 (emulsifying agent) and kerosene (diluent), and hydrochloric acid as a stripping agent in the product phase. The experimental results fit the pseudo-second-order adsorption kinetic model, showing good relationships between the experimental and model parameters. Although both Cu(II) diffusion through the feed/membrane interface boundary layer and complex Cu-benzoylacetone diffusion through the membrane phase controls Cu(II) transport, it is the former step that mainly controls the transport process.
Collapse
Affiliation(s)
- Gerardo León
- Departamento de Ingeniería Química y Ambiental, Universidad Politécnica de Cartagena, Paseo Alfonso XIII 52, 30206 Cartagena, Spain; (B.M.); (M.A.G.)
- Correspondence:
| | - Elisa Gómez
- Departamento de Ingeniería Química, Campus de Espinardo, Universidad de Murcia, 30100 Murcia, Spain; (E.G.); (A.M.H.); (M.G.); (M.D.M.)
| | - Beatriz Miguel
- Departamento de Ingeniería Química y Ambiental, Universidad Politécnica de Cartagena, Paseo Alfonso XIII 52, 30206 Cartagena, Spain; (B.M.); (M.A.G.)
| | - Asunción María Hidalgo
- Departamento de Ingeniería Química, Campus de Espinardo, Universidad de Murcia, 30100 Murcia, Spain; (E.G.); (A.M.H.); (M.G.); (M.D.M.)
| | - María Gómez
- Departamento de Ingeniería Química, Campus de Espinardo, Universidad de Murcia, 30100 Murcia, Spain; (E.G.); (A.M.H.); (M.G.); (M.D.M.)
| | - María Dolores Murcia
- Departamento de Ingeniería Química, Campus de Espinardo, Universidad de Murcia, 30100 Murcia, Spain; (E.G.); (A.M.H.); (M.G.); (M.D.M.)
| | - María Amelia Guzmán
- Departamento de Ingeniería Química y Ambiental, Universidad Politécnica de Cartagena, Paseo Alfonso XIII 52, 30206 Cartagena, Spain; (B.M.); (M.A.G.)
| |
Collapse
|
22
|
Radzyminska-Lenarcik E, Maslowska K, Urbaniak W. Removal of Copper (II), Zinc (II), Cobalt (II), and Nickel (II) Ions by PIMs Doped 2-Alkylimidazoles. MEMBRANES 2021; 12:16. [PMID: 35054539 PMCID: PMC8779304 DOI: 10.3390/membranes12010016] [Citation(s) in RCA: 4] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 11/29/2021] [Revised: 12/16/2021] [Accepted: 12/21/2021] [Indexed: 11/27/2022]
Abstract
Polymer inclusion membranes (PIMs) are an attractive approach to the separation of metals from an aqueous solution. This study is concerned with the use of 2-alkylimidazoles (alkyl = methyl, ethyl, propyl, butyl) as ion carriers in PIMs. It investigates the separation of copper (II), zinc (II), cobalt (II), and nickel (II) from aqueous solutions with the use of polymer inclusion membranes. PIMs are formed by casting a solution containing a carrier (extractant), a plasticizer (o-NPPE), and a base polymer such as cellulose triacetate (CTA) to form a thin, flexible, and stable film. The topics discussed include transport parameters, such as the type of carrier, initial fluxes, separation coefficients of copper in relation to other metals, as well as transport recovery of metal ions. The membrane was characterized using AFM and SEM to obtain information on its composition.
Collapse
Affiliation(s)
- Elzbieta Radzyminska-Lenarcik
- Faculty of Chemical Technology and Engineering, Bygdoszcz University of Science and Technology, 85-796 Bydgoszcz, Poland
| | - Kamila Maslowska
- Faculty of Chemistry, Adam Mickiewicz University, 61-712 Poznan, Poland; (K.M.); (W.U.)
| | - Wlodzimierz Urbaniak
- Faculty of Chemistry, Adam Mickiewicz University, 61-712 Poznan, Poland; (K.M.); (W.U.)
| |
Collapse
|
23
|
Khraisheh M, Elhenawy S, AlMomani F, Al-Ghouti M, Hassan MK, Hameed BH. Recent Progress on Nanomaterial-Based Membranes for Water Treatment. MEMBRANES 2021; 11:995. [PMID: 34940495 PMCID: PMC8709222 DOI: 10.3390/membranes11120995] [Citation(s) in RCA: 14] [Impact Index Per Article: 4.7] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 11/19/2021] [Revised: 12/08/2021] [Accepted: 12/15/2021] [Indexed: 11/16/2022]
Abstract
Nanomaterials have emerged as the new future generation materials for high-performance water treatment membranes with potential for solving the worldwide water pollution issue. The incorporation of nanomaterials in membranes increases water permeability, mechanical strength, separation efficiency, and reduces fouling of the membrane. Thus, the nanomaterials pave a new pathway for ultra-fast and extremely selective water purification membranes. Membrane enhancements after the inclusion of many nanomaterials, including nanoparticles (NPs), two-dimensional (2-D) layer materials, nanofibers, nanosheets, and other nanocomposite structural materials, are discussed in this review. Furthermore, the applications of these membranes with nanomaterials in water treatment applications, that are vast in number, are highlighted. The goal is to demonstrate the significance of nanomaterials in the membrane industry for water treatment applications. It was found that nanomaterials and nanotechnology offer great potential for the advancement of sustainable water and wastewater treatment.
Collapse
Affiliation(s)
- Majeda Khraisheh
- Department of Chemical Engineering, College of Engineering, Qatar University, Doha 2713, Qatar; (S.E.); (F.A.); (B.H.H.)
| | - Salma Elhenawy
- Department of Chemical Engineering, College of Engineering, Qatar University, Doha 2713, Qatar; (S.E.); (F.A.); (B.H.H.)
| | - Fares AlMomani
- Department of Chemical Engineering, College of Engineering, Qatar University, Doha 2713, Qatar; (S.E.); (F.A.); (B.H.H.)
| | - Mohammad Al-Ghouti
- Environmental Sciences Program, Department of Biological and Environmental Sciences, College of Arts and Sciences, Qatar University, Doha 2713, Qatar;
| | | | - Bassim H. Hameed
- Department of Chemical Engineering, College of Engineering, Qatar University, Doha 2713, Qatar; (S.E.); (F.A.); (B.H.H.)
| |
Collapse
|
24
|
Tighadouini S, Radi S, Roby O, Hammoudan I, Saddik R, Garcia Y, Almarhoon ZM, Mabkhot YN. Kinetics, thermodynamics, equilibrium, surface modelling, and atomic absorption analysis of selective Cu(ii) removal from aqueous solutions and rivers water using silica-2-(pyridin-2-ylmethoxy)ethan-1-ol hybrid material. RSC Adv 2021; 12:611-625. [PMID: 35424512 PMCID: PMC8978821 DOI: 10.1039/d1ra06640d] [Citation(s) in RCA: 4] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/03/2021] [Accepted: 12/07/2021] [Indexed: 11/21/2022] Open
Abstract
The removal of heavy metals is attracting considerable attention due to their undesirable effects on the environment. In this investigation, a new adsorbent based on silica functionalized with pyridin-2-ylmethanol (SiPy) was successfully synthesized to yield to a hybrid material. FTIR, SEM, TGA, and specific surface area analysis were used to characterize the structure and morphology of the SiPy hybrid material. Various heavy metal ions such as Cu(ii), Zn(ii), Cd(ii), and Pb(ii) were selected to examine the adsorption efficiency of the newly prepared adsorbent, optimized at varying solution pH, contact time, concentration, and temperature. The adsorbent SiPy displayed good adsorption capacity of 90.25, 75.38, 55.23, and 35.12 mg g−1 for Cu(ii), Zn(ii), Cd(ii), and Pb(ii), respectively, at 25 min and pH = 6. The adsorption behaviors of metal ions onto the SiPy adsorbent fitted well with the pseudo-second-order kinetic mode and the isotherm was better described by the Langmuir isotherm. The thermodynamic studies disclose spontaneous and endothermic adsorption process. Furthermore, the SiPy adsorbent retained good selectivity and regeneration properties after five adsorption–desorption cycles of Cu(ii). A computational investigation of the adsorption mechanism indicates that the N-pyridine, O-hydroxyl, and ether O-atoms play a predominant role during the capture of Cu(ii), Zn(ii), Cd(ii), and Pb(ii). This study proposes the SiPy adsorbent as an attractive material for the selective removal of Cu(ii) from real river water and real industrial wastewater. The removal of heavy metals is attracting considerable attention due to their undesirable effects on the environment.![]()
Collapse
Affiliation(s)
- Said Tighadouini
- Laboratory of Organic Synthesis, Extraction and Valorization, Faculty of Sciences Ain Chock, Hassan II University, BP: 5366 Casablanca Morocco
| | - Smaail Radi
- University Mohammed First, Faculty of Sciences, Laboratory of Applied Chemistry and Environment (LCAE) 60000 Oujda Morocco
| | - Othmane Roby
- Laboratory of Organic Synthesis, Extraction and Valorization, Faculty of Sciences Ain Chock, Hassan II University, BP: 5366 Casablanca Morocco
| | - Imad Hammoudan
- Laboratory of Organic Synthesis, Extraction and Valorization, Faculty of Sciences Ain Chock, Hassan II University, BP: 5366 Casablanca Morocco
| | - Rafik Saddik
- Laboratory of Organic Synthesis, Extraction and Valorization, Faculty of Sciences Ain Chock, Hassan II University, BP: 5366 Casablanca Morocco
| | - Yann Garcia
- Institute of Condensed Matter and Nanosciences, Molecular Chemistry, Materials and Catalysis (IMCN/MOST), Université Catholique de Louvain Place Louis Pasteur 1 1348 Louvain-la-Neuve Belgium
| | - Zainab M Almarhoon
- Department of Chemistry, College of Science, King Saud University P.O. Box 2455 Riyadh 11451 Saudi Arabia
| | - Yahia N Mabkhot
- Department of Pharmaceutical Chemistry, College of Pharmacy, King Khalid University P.O. Box 960 Abha 61421 Saudi Arabia
| |
Collapse
|
25
|
|
26
|
A Review on Promising Membrane Technology Approaches for Heavy Metal Removal from Water and Wastewater to Solve Water Crisis. WATER 2021. [DOI: 10.3390/w13223241] [Citation(s) in RCA: 17] [Impact Index Per Article: 5.7] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 02/06/2023]
Abstract
Due to the impacts of water scarcity, the world is looking at all possible solutions for decreasing the over-exploitation of finite freshwater resources. Wastewater is one of the most reliable and accessible water supplies. As the population expands, so do industrial, agricultural, and household operations in order to meet man’s enormous demands. These operations generate huge amounts of wastewater, which may be recovered and used for a variety of reasons. Conventional wastewater treatment techniques have had some success in treating effluents for discharge throughout the years. However, advances in wastewater treatment techniques are required to make treated wastewater suitable for industrial, agricultural, and household use. Diverse techniques for removing heavy metal ions from various water and wastewater sources have been described. These treatments can be categorized as adsorption, membrane, chemical, or electric. Membrane technology has been developed as a popular alternative for recovering and reusing water from various water and wastewater sources. This study integrates useful membrane technology techniques for water and wastewater treatment containing heavy metals, with the objective of establishing a low-cost, high-efficiency method as well as ideal production conditions: low-cost, high-efficiency selective membranes, and maximum flexibility and selectivity. Future studies should concentrate on eco-friendly, cost-effective, and long-term materials and procedures.
Collapse
|