Performance and stratified microbial community of vermi-filter affected by Acorus calamus and Epipremnum aureum during recycling of concentrated excess sludge

New developments on vermifiltration as a bio-ecological wastewater treatment technology: Mechanism, application, performance, modelling, optimization, and sustainability

The review discusses the advancements in vermifiltration research over the last decade, focusing on pollution removal mechanisms, system performance, the fate of filter components, and by-products. Vermifiltration has demonstrated remarkable capabilities, particularly in treating highly contaminated wastewater with Chemical Oxygen Demand (COD) levels exceeding 92,000 mg/L and Biochemical Oxygen Demand (BOD5) levels over 25,000 mg/L, achieving removal rates of approximately 89% and 91%, respectively. Importantly, vermifiltration maintains its effectiveness even with fluctuating organic loads at the inlet, thanks to optimization of parameters like Hydraulic Loading Rate, biodegradable organic strength, earthworm density and active layer depth. Clogging issues can be minimized through parameters optimization. The review also highlights vermifiltrations' potential in co-treating the organic fraction of municipal solid waste while significantly reducing heavy metal concentrations, including Cd, Ni, Pb, Cu, Cr, and Zn, during the treatment process. Earthworms play a pivotal role in the removal of various components, with impressive removal percentages, such as 75% for Total Organic Carbon (TOC), 86% for Total COD, 87% for BOD5, 59% for ammonia nitrogen, and 99.9% for coliforms. Furthermore, vermifiltration-treated effluents can be readily utilized in agriculture, with the added benefit of producing vermicompost, a nutrient-rich biofertilizer. The technology contributes to environmental sustainability, as it helps reduce greenhouse gas emissions (GHG), thanks to earthworm activity creating an aerobic environment, minimizing GHG production compared to other wastewater treatment methods. In terms of pollutant degradation modeling, the Stover-Kincannon model outperforms the first-order and Grau second-order models, with higher regression coefficients (R2 = 0.9961 for COD and R2 = 0.9353 for TN). Overall, vermifiltration emerges as an effective and sustainable wastewater treatment solution, capable of handling challenging wastewater sources, while also producing valuable by-products and minimizing environmental impacts.

Contemporary Drift in Emerging Micro(nano)plastics Removal and Upcycling Technologies from Municipal Wastewater Sludge: Strategic Innovations and Prospects

Purpose of Review

Annually, huge amounts of microplastics (MPs) are added to farmlands through sewage sludge (SS)/biosolid applications as a fertilizer. Most research emphasizes the enormity of the problem and demonstrates the fate, impacts, and toxicity of MPs during SS treatment processes and land applications. None has addressed the management strategies. To address the gaps, the current review evaluates the performance analysis of conventional and advanced sludge treatment methods in eliminating MPs from sludge.

Recent Findings

The review uncovers that the occurrence and characteristics of MPs in SS are highly governed by factors such as population density, speed and level of urbanization, citizens' daily habits, and treatment units in wastewater treatment plants (WWTPs). Furthermore, conventional sludge treatment processes are ineffective in eliminating MPs from SS and are accountable for the increased small-sized MPs or micro(nano)plastics (MNPs) along with altered surface morphology facilitating more co-contaminant adsorption. Simultaneously, MPs can influence the operation of these treatment processes depending on their size, type, shape, and concentration. The review reveals that research to develop advanced technology to remove MPs efficiently from SS is still at a nascent stage.

Summary

This review provides a comprehensive analysis of MPs in the SS, by corroborating state-of-the-knowledge, on different aspects, including the global occurrence of MPs in WWTP sludge, impacts of different conventional sludge treatment processes on MPs and vice versa, and efficiency of advanced sludge treatment and upcycling technologies to eliminate MPs, which will facilitate the development of mitigation measures from the systematic and holistic level.

Graphical Abstract

Disturbance and restoration of soil microbial communities after in-situ thermal desorption in a chlorinated hydrocarbon contaminated site

Thermal desorption technology has been widely used for the remediation of organic contaminated soil, but the heating process may alter the soil properties and its safety reutilization. After thermal remediation, the target pollutants including chloroform, 1,2-dichloroethane, 1,1,2-trichloroethane, 1,2,3-trichloropropane and vinyl chloride in the chlorinated hydrocarbon contaminated site were reduced significantly. The soil microbial α-diversity was also reduced by more than half. Notably, the relative abundance of Chloroflexi decreased by 9.0%, while Firmicutes had a 9.0% increase after thermal remediation. By water regulation and exogenous microorganism addition, the soil microbial community could not be restored to its initial state before thermal remediation in a relatively short time (30 days). The relative abundance of Proteobacteria increased from 25.4% to 41.7% and 51.0% by water regulation and exogenous microorganism addition, respectively. The modularity of the microbial co-occurrence network was strengthened after microbial restoration, but the interaction among microorganisms was weakened. Thermal remediation might be conducive to the C- and N-cycle related processes, but severely weakened the sulfide oxidation processes. Notably, microbial restoration would benefit the recovery of the S-cycle functional groups. These results provided a new perspective for the safety reutilization of soil after thermal remediation.

Reduction performance of microplastics and their behavior in a vermi-wetland during the recycling of excess sludge: A quantitative assessment for fluorescent polymethyl methacrylate

Large amounts of microplastics (MPs) that have accumulated in excess sludge may increase the environmental risk for its subsequent treatment. This study aimed to investigate the performance and mechanism of the reduction of MPs in excess sludge in a vermi-wetland. For this, 1 μm, 100 μm, and 500 μm of fluorescent MPs stained with Nile red were added to raw sludge, and their decreased numbers were quantified during the treatment of sludge. The results showed that the removal rates of chemical oxygen demand and total solids from the excess sludge were 63.44%-90.98% and 37.61%-51.56% in the vermi-wetland, respectively. The numbers of 1 μm, 100 μm, and 500 μm MPs could be reduced by 86.62%-95.69%, 95.44%-99.52%, and 100% in the vermi-wetland, respectively. These results indicate that the vermi-wetland is more effective at eliminating MPs. Further insight into the vermi-wetland stratification was obtained, and more than 74.87% of the MPs were intercepted in the vermicompost layer. Moreover, all the particle sizes of MPs were found in the excrement of earthworms. However, only 1 μm MPs were detected in their digestive organs. This study suggests that the interception effect is primarily responsible for elimination of MPs in excess sludge, and the bioturbation of earthworms plays an important role in the mobilization of MPs in vermi-wetlands.