Simultaneous adsorption of mercury species from aquatic environments using magnetic nanoparticles coated with nanomeric silver functionalized with l-Cysteine

Thiol-functionalized cellulose for mercury polluted water remediation: Synthesis and study of the adsorption properties

Mercury pollution poses a global health threat due to its high toxicity, especially in seafood where it accumulates through various pathways. Developing effective and affordable technologies for mercury removal from water is crucial. Adsorption stands out as a promising method, but creating low-cost materials with high selectivity and capacity for mercury adsorption is challenging. Here we show a sustainable method to synthesize low-cost sulfhydrylated cellulose with ethylene sulfide functionalities bonded glucose units. Thiol-functionalized cellulose exhibits exceptional adsorption capacity (1325 mg g-1) and selectivity for Hg(II) over other heavy metals (Co, Cu, Zn, Pb) and common cations (Ca++, Mg++) found in natural waters. It performs efficiently across a wide pH range and different aqueous matrices, including wastewater, and can be regenerated and reused multiple times without significant loss of performance. This approach offers a promising solution for addressing mercury contamination in water sources.

Ionic and nanoparticulate silver alleviate the toxicity of inorganic mercury in marine microalga Chaetoceros muelleri

Toxicological effects of silver nanoparticles (SNPs) in different organisms have been studied; however, interactions of SNPs with other environmental pollutants such as mercury are poorly understood. Herein, bioassay tests were performed according to ΟECD 201 guideline to assess the toxic effects induced by mercury ions (mercury chloride, MCl) on the marine microalga Chaetoceros muelleri in the presence of SNPs or silver ions (silver nitrate, SN). Acute toxicity tests displayed that the presence of SNPs or SN (0.01 mg L-1) significantly reduced the toxicity of MCl (0.001, 0.01, 0.1, 1, 10, and 100 mg L-1) and increased the IC50 of MCl from 0.072 ± 0.014 to 0.381 ± 0.029 and 0.676 ± 0.034 mg L-1, respectively. In the presence of SN or SNPs, the mercury-reducing effect on algal population growth significantly decreased. Considering the increase of IC50, the mercury toxicity decreased approximately 5.44 and 9.66 times in the presence of SNPs or SN, respectively. The chlorophyll a and c contents decreased at all exposures; however, the decrease by MCl-SNPs and MCl-SN was significantly less than MCl except at 1 mg L-1. The lowering effect of MCl-SN on chlorophyll contents was less than MCl and MCl-SNPs. MCl exposure induced significant raises in total protein content (TPC) at concentrations < 0.01mg  L-1, with a maximum of ~ 70.83% attained at 100 mg L-1. The effects of MCl-SNPs and MCl-SN on TPC were significantly less than MCl. Total lipid content (TLC) at all MCl concentrations was higher than the control, while at coexposure to MCl-SN, TLC did not change until 0.01 mg L-1 compared with the control. The effects of MCl-SN and MCL-SNPs on TPC and TLC were in line with toxicity results, and were significantly less than those of MCl individually, confirming their antagonistic effects on MCl. The morphological changes of algal cells and mercury content of the cell wall at MCl-SN and MCl-SNPs were mitigated compared with MCl exposure. These findings highlight the mitigatory impacts of silver species on mercury toxicity, emphasizing the need for better realizing the mixture toxicity effects of pollutants in the water ecosystem.

Facilitated Adsorption of Mercury(II) and Chromium(VI) Ions over Functionalized Carbon Nanotubes

By considering the importance of water and its purity, herein, a powerful adsorbent has been developed for the adsorption of two toxic contaminants that commonly exist in water, viz., divalent mercury and hexavalent chromium. The efficient adsorbent, CNTs-PLA-Pd, was prepared by covalent grafting polylactic acid to carbon nanotubes and subsequent deposition of palladium nanoparticles. The CNTs-PLA-Pd could adsorb Hg(II), and Cr(VI) entirely exists in water. The adsorption rate for Hg(II) and Cr(VI) was rapid at initial stage, followed by gradual decrease, and attained the equilibrium. The Hg(II) and Cr(VI) adsorption was perceived within 50 min and 80 min, respectively with CNTs-PLA-Pd,. Further, experimental data for Hg(II) and Cr(VI) adsorption was analyzed, and kinetic parameters were estimated using pseudo-first and second-order models. The adsorption process of Hg(II) and Cr(VI) followed the pseudo-second-order kinetics, and the rate-limiting step in the adsorption was chemisorption. The Weber-Morris intraparticle pore diffusion model revealed that the Hg(II) and Cr(VI) adsorption over CNTs-PLA-Pd occurs through multiple phases. The experimental equilibrium parameters for the Hg(II) and Cr(VI) adsorption were estimated by Langmuir, Freundlich, and Temkin isotherms models. All three models were well suited and demonstrated that Hg(II) and Cr(VI) adsorption over CNTs-PLA-Pd transpires through monolayer molecular covering and chemisorption.

Efficient Fe(III)/Fe(II) cycling mediated by L-cysteine functionalized zero-valent iron for enhancing Cr(VI) removal

Herein, L-cysteine (Cys) was modified on zero-valent iron (C-ZVI^bm) by using a mechanical ball-milling method to improve the surface functionality and the Cr(VI) removal efficiency. Characterization results indicated that Cys was modified on the surface of ZVI by the specific adsorption of Cys on the oxide shell to form a -COO-Fe complex. The Cr(VI) removal efficiency of C-ZVI^bm (99.6%) was much higher than that of ZVI^bm (7.3%) in 30 min. The attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR) analysis inferred that Cr(VI) was more likely to be adsorbed on the surface of C-ZVI^bm to form bidentate binuclear inner-sphere complexes. The adsorption process was well-matched to the Freundlich isotherm and the pseudo-second-order kinetic model. Electrochemical analysis and electron paramagnetic resonance (ESR) spectroscopy revealed that Cys on the C-ZVI^bm lowered the redox potential of Fe(III)/Fe(II), and favored the surface Fe(III)/Fe(II) cycling mediated by the electrons from Fe⁰ core. These electron transfer processes were beneficial to the surface reduction of Cr(VI) to Cr(III). Our findings provide new understandings into the surface modification of ZVI with a low-molecular weight amino acid to promote in-situ Fe(III)/Fe(II) cycling, and have great potential for the construction of efficient systems for Cr(VI) removal.

Removal of heavy metals from binary and multicomponent adsorption systems using various adsorbents - a systematic review

The ecosystem and human health are both significantly affected by the occurrence of potentially harmful heavy metals in the aquatic environment. In general, wastewater comprises an array of heavy metals, and the existence of other competing heavy metal ions might affect the adsorptive elimination of one heavy metal ion. Therefore, to fully comprehend the adsorbent's efficiency and practical applications, the abatement of heavy metals in multicomponent systems is important. In the current study, the multicomponent adsorption of heavy metals from different complex mixtures, such as binary, ternary, quaternary, and quinary solutions, utilizing various adsorbents are reviewed in detail. According to the systematic review, the adsorbents made from locally and naturally occurring materials, such as biomass, feedstocks, and industrial and agricultural waste, are effective and promising in removing heavy metals from complex water systems. The systematic study further discovered that numerous studies evaluate the adsorption characteristics of an adsorbent in a multicomponent system using various important independent adsorption parameters. These independent adsorption parameters include reaction time, solution pH, agitation speed, adsorbent dosage, initial metal ion concentration, ionic strength as well as reaction temperature, which were found to significantly affect the multicomponent sorption of heavy metals. Furthermore, through the application of the multicomponent adsorption isotherms, the competitive heavy metals sorption mechanisms were identified and characterized by three primary kinds of interactive effects including synergism, antagonism, and non-interaction. Despite the enormous amount of research and extensive data on the capability of different adsorbents, several significant drawbacks hinder adsorbents from being used practically and economically to remove heavy metal ions from multicomponent systems. As a result, the current systematic review provides insights and perspectives for further studies through the thorough and reliable analysis of the relevant literature on heavy metals removal from multicomponent systems.

Complete and simultaneous removal of ionic silver and silver nanoparticles by using an ionic liquid supported on a magnetic nanoparticle core

The global pandemic situation due to COVID-19 has given rise to the massive use of disinfectant products, many of them based on silver atoms. After the use of these products, the silver passes into the aqueous effluents, becoming an emerging contaminant in waters. In this work, a novel procedure for the total and simultaneous removal of ionic and nanomeric silver in aqueous samples is introduced, employing magnetic nanoparticles wrapped with an ionic liquid (Fe₃O₄@IL) as a removal agent. Experimental variables such as pH, contact time, temperature, as well as pollutant and removal agent doses were studied to achieve the total elimination, exhibiting exceptional conditions for the removal of different concentrations of silvers species in water. The approach achieves 100% removal efficiency for the simultaneous removal of both silver species, goal not achieved previously. Also, 100% removal efficiency is reached for the both species separately, since ionic silver is adsorbed onto the Fe₃O₄, while nanomeric silver is extracted in the IL. Particularly, for concentrations within the range 50-200 μg L^-1, total removal efficiency was reached for a wide range of temperatures and a pH range 7-9, achieved in just 15 min, for all cases. Additionally, the doses of Fe₃O₄@IL employed to remove all concentrations of silver were 13.7 mg. Characterization of Fe₃O₄@IL surfaces before and after the process was performed by means of Field Effect Scanning Electron Microscopy and Energy Dispersive X-ray Spectroscopy. Fe₃O₄@IL was recycled by employing 100 μL of 1% HNO₃ solution, allowing its use for 10 additional silver removal cycles without loss of efficiency. The study of adsorption kinetics and equilibrium isotherms reveal a Freundlich-type adsorption, which suggests affinity between sites in the complex surface of Fe₃O₄@IL, and Elovich kinetics, indicative of chemisorption onto a heterogeneous surface, while the temperature shows no effect on the results.

Total removal of amoxicillin from water using magnetic core nanoparticles functionalized with silver

Framed in the problem of emerging pollutants, in this work we introduce a novel procedure for the total removal of amoxicillin from water samples using magnetic nanoparticles functionalized with nanometric silver (Fe₃O₄@AgNPs). Experimental conditions such as pH, contact time, temperature, as well as adsorbate and adsorbent doses have been studied to achieve the total adsorption for different concentrations of amoxicillin in water. Particularly, for concentrations 10 and 100 mg L^-1, a maximum removal efficiency of 100% was reached at room temperature and pH = 7 after 15 min of contact time between adsorbent and water samples under gentle shaking. The doses of adsorbent employed to remove 10 and 100 mg L^-1 of amoxicillin were 100 and 500 μL, respectively. Characterization of the adsorbent surfaces was performed by Scanning and Transmission Electron Microscopy, Energy Dispersive X-ray Spectroscopy, BET analysis and Fourier-transform infrared spectroscopy. Recycling studies were carried out employing 500 μL of NaOH solution 1 M during 15 min in order to explore desorption and reuse of the adsorbent, showing that Fe₃O₄@AgNPs remains unaltered and can be used for two more additionally adsorption cycles, exhibiting 93% adsorption efficiency after the third regeneration. The characterization of equilibrium isotherms and thermodynamics reveal a Langmuir-type endothermic chemisorption.

Understanding the phytotoxic impact of Al3+, nano-size, and bulk Al2O3 on growth and physiology of maize (Zea mays L.) in aqueous and soil media

The release and accumulation of metal-oxide nanoparticles in soils have threatened terrestrial plants. However, limited knowledge is available on the accumulation of nano-Al₂O₃ (22 nm), bulk-Al₂O₃ (167 nm), and Al³⁺ by maize plants and the subsequent impact on its physiology and growth in agar (0.7% w/v), hydroponic (1X), and soil. Maize plants were cultivated with 0.05-2 mg g^-1 or ml^-1 of three Al types and their biological attributes, oxidative status, Al bioaccumulation, and translocation were measured. The ICP-MS results revealed a dose-dependent increase (P ≤ 0.05 or ≤0.01) in Al content in maize tissues following nano-Al₂O₃ and Al³⁺ exposure, however, plants exposed to bulk-Al₂O₃ showed no significant uptake of Al. Atomic mapping by EDX during SEM analysis and TEM revealed varied distributions of nano-Al₂O₃ from roots to aerial parts and intracellular transportation. Al deposition in tissues followed the order: Al³⁺ > nano-Al₂O₃ > bulk-Al₂O₃ and therefore, a similar trend of toxicity was observed for seed germination, the emergence of plant organs, length, biomass accumulation, total chlorophyll, phosphorus content, and total soluble protein. Oxidative stress was profoundly induced dose-dependently and was highest at 2 mg ml^-1 or g^-1 of Al³⁺ and nano-Al₂O₃ when superoxide radical formation, proline induction, activities of superoxide dismutase (SOD), catalase (CAT), peroxidase (GPX), and glutathione reductase (GR) and membrane lipid peroxidation were measured. Aluminum toxicity was found higher in hydroponically grown maize compared to soil-grown maize. Forty days exposure in soil showed greater inhibition of maize growth compared to 20 days exposure. This study is significant in understanding the maize response to different Al types in soil and soil-free media.