Microwave-assisted synthesis of ZnAl-LDH/g-C3N4 composite for degradation of antibiotic ciprofloxacin under visible-light illumination

High stability and selectivity of butterfly pea flower extract-NiAl LDH-based catalysts in the tetracycline degradation

Layered double hydroxide (LDH) is an applicable material that can be modified in various ways. Modifications using natural extracts fulfill the principles of "green chemistry." The preparation of butterfly pea flower extract (BPE)-modified NiAl LDH was completed using the calcination and restacking method. The characteristics of the prepared composites were identified through analysis of functional groups, crystal phase, bandgap energy, surface area and surface morphology. Fourier transform-infrared (FT-IR) characterization revealed that the active group of the catalyst is -OH except for NiAl layered double oxide (LDO), which has the metal oxide-like functional groups. X-ray diffraction patterns expressed a typical layered material structure of NiAl LDH dan NiAl LDH-BPE, but not for NiAl LDO and NiAl LDO-BPE. Introducing BPE into NiAl LDH and NiAl LDO effectively decreased the bandgap energy and changed the surface morphology. The prepared catalysts were applied in a batch system with pH 5 to degrade tetracycline (TC). NiAl LDO demonstrated the highest activity as a catalyst in TC degradation, with a 93.61% degradation rate. In contrast, NiAl LDO-BPE demonstrated the highest structural stability in TC degradation and repeated use, with an initial degradation percentage of 82.58% and a fifth regeneration percentage of 71.4%.

Recent Advances in LDH/g-C3N4 Heterojunction Photocatalysts for Organic Pollutant Removal

Environmental pollution has been decreased by using photocatalytic technology in conjunction with solar energy. An efficient method to obtain highly efficient photocatalysts is to build heterojunction photocatalysts by combining graphitic carbon nitride (g-C3N4) with layered double hydroxides (LDHs). In this review, recent developments in LDH/g-C3N4 heterojunctions and their applications for organic pollutant removal are systematically exhibited. The advantages of LDH/g-C3N4 heterojunction are first summarized to provide some overall understanding of them. Then, a variety of approaches to successfully assembling LDH and g-C3N4 are simply illustrated. Last but not least, certain unmet research needs for the LDH/g-C3N4 heterojunction are suggested. This review can provide some new insights for the development of high-performance LDH/g-C3N4 heterojunction photocatalysts. It is indisputable that the LDH/g-C3N4 heterojunctions can serve as high-performance photocatalysts to make new progress in organic pollutant removal.

Layered by layered construction of three novel ZnCo-LDHs/g-C3N4 for the removal of sunset yellow by adsorption-photocatalytic process

The removal of organic dyes has attracted attention by adsorption-photocatalytic synergetic process in water treatment technology. Three novel ZnCo-LDHs/g-C3N4 were successfully prepared for the first time by layered construction technique through the hydrolysis of triethanolamine in this paper. They exhibited high specific surface area which facilitates the adsorption of sunset yellow (SY) from solution to catalyst surface. All the target pollutant dyes are very effectively removed by the three ZnCo-LDHs/g-C3N4 composites through synergetic effect of adsorption and photocatalysis process under UV irradiation (λ = 365 nm). The order of synergistic degradation effect for SY is as follows: ZnCo-LDHs/g-C3N4-3 (99.6%) > ZnCo-LDHs/g-C3N4-2 (99.5%) > ZnCo-LDHs/g-C3N4-1 (99.3%) > pure g-C3N4 (77.4%) > pure ZnCo-LDHs (44.2.6%) at the initial concentration of 75 mg L-1. ZnCo-LDHs/g-C3N4-3 has the largest k value (0.0284 min-1) in SY degradation, which is 2.8 times that of g-C3N4. ZnCo-LDHs/g-C3N4-3 is a very promising adsorption-photocatalyst for the removal of SY from wastewater. The electron spin resonance experiments demonstrate that OH·, 1O2, and O2- are the dominant active species and oxides SY together. This result demonstrates that the three ZnCo-LDHs/g-C3N4 have practical applications as efficient adsorption-photocatalytic materials and also provides a synergetic strategy for the removal of SY wastewater.

Facile fabrication of a 2D/2D CoFe-LDH/g-C3N4 nanocomposite with enhanced photocatalytic tetracycline degradation

The widespread use of tetracycline (TC) in medicine and agriculture has caused severe pollution problems in the environment. In this work, a nanocomposite comprising of CoFe-layered double hydroxides grown on graphitic carbon nitride nanosheets (CoFe-LDH/g-C₃N₄) with a notable two-dimensional/two-dimensional (2D/2D) heterostructure was synthesized through a facile co-precipitation method. The CoFe-LDH/g-C₃N₄ nanocomposite displayed significantly improved visible-light-driven photocatalytic activity towards TC degradation, compared to pristine g-C₃N₄ and CoFe-LDH alone. The enhanced activation efficiency was a result of intimate interfacial contact, enlarged the surface area, broadened visible-light absorbance, and enhanced photogenerated electron transfer. The scavenging experiments showed that holes (h⁺) and superoxide radical anions (‧O₂^-) played a crucial role in TC degradation. Factors including the type of TCs, initial concentration of TC, presence of ions, and the type of water matrix were investigated to evaluate the practical feasibility of the nanocomposites for TC removal from antibiotics-contaminated water. The repeated tests showed that the nanocomposites possessed good stability and recyclability. This study demonstrated the feasibility of achieving photocatalytic activity enhancement of g-C₃N₄ through the formation of a 2D-2D heterostructure between LDHs and g-C₃N₄.

Synthesis of visible light responsive ZnCoFe layered double hydroxide towards enhanced photocatalytic activity in water treatment

In this study, a ternary layered double hydroxide containing Zn, Co, and Fe transition metals (ZnCoFe LDH) was developed using a co-precipitation procedure. The as-synthesized photocatalyst was evaluated for its performance in the degradation of methylene blue (MB) under visible light irradiation. The effects of various process conditions including photocatalyst dosage, pollutant concentration, pH, lamp distance, and lamp power were investigated. The ZnCoFe LDH achieved approximately 74% photodegradation efficiency owing to the narrow bandgap of 2.14 eV. The Langmuir-Hinselwood rate constants were calculated as 1.17 min^-1 and 3.55 min^-1 for photolysis by LED lamp alone and for photocatalysis by LED/ZnCoFe LDH, respectively. The photocatalytic ability of the LDH was attributed to the generation of radical species like ^•OH and O₂^•-. The photocatalytic degradation intermediates of MB were determined by GC-MS analysis. The catalyst retained its performance throughout seven reuse cycles with only a 4.17% reduction in removal efficiency. The energy per order E_EO of the ZnCoFe/LED process in 180 min treatment time was determined as 5.41 kWh.m^-3. order^-1. This study shows that ZnCoFe LDH has sufficient activity and photostability for long-term application in photocatalytic water treatment.

High Photocatalytic Activity of g-C3N4/La-N-TiO2 Composite with Nanoscale Heterojunctions for Degradation of Ciprofloxacin

Ciprofloxacin (CIP) in natural waters has been taken as a serious pollutant because of its hazardous biological and ecotoxicological effects. Here, a 3D nanocomposite photocatalyst g-C₃N₄/La-N-TiO₂ (CN/La-N-TiO₂) was successfully synthesized by a simple and reproducible in-situ synthetic method. The obtained composite was characterized by XRD, SEM, BET, TEM, mapping, IR, and UV-vis spectra. The photocatalytic degradation of ciprofloxacin was investigated by using CN/La-N-TiO₂ nanocomposite. The main influential factors such as pH of the solution, initial CIP concentration, catalyst dosage, and coexisting ions were investigated in detail. The fastest degradation of CIP occurred at a pH of about 6.5, and CIP (5 mg/L starting concentration) was completely degraded in about 60 min after exposure to the simulated solar light. The removal rates were rarely affected by Na⁺ (10 mg·L⁻¹), Ca²⁺ (10 mg·L⁻¹), Mg²⁺ (10 mg·L⁻¹), and urea (5 mg·L⁻¹), but decreased in the presence of NO₃⁻ (10 mg·L⁻¹). The findings indicate that CN/La-N-TiO₂ nanocomposite is a green and promising photocatalyst for large-scale applications and would be a candidate for the removal of the emerging antibiotics present in the water environment.