Polystyrene magnetic nanocomposite blend: An effective, facile, and economical alternative in oil spill removal applications

Highly effective and reusable Ni-Al oxide/Zn0.4Co0.6Fe2O4 superparamagnetic aerogel for oil-water separation

Oily wastewater from the oil industry and oil spill accidents has become a serious environmental problem and has attracted worldwide attention. The present study reports on the successful preparation of a novel magnetic Ni-Al oxide/Zn0.4Co0.6F2O4 mesoporous aerogel (MNA) as a highly selective adsorbent for oil removal from water. Oleic acid (OA) and Triton X-100 (TX) were used as hydrophobic agents for MNA surface modification. It was found that the attached amount of OA on the mesoporous MNA aerogel is 3.5 times larger than that of TX, giving an advantage to MNA-OA in oil separation. The MNA-OA displayed superhydrophobicity (contact angle ∼150°) and superparamagnetism properties that allowed the adsorbent to be used selectively for oil removal. The MNA-OA was found to have a high oil removal efficiency of ∼97% with an adsorption capacity of ∼2 g/g. Furthermore, the produced magnetic adsorbent has high stability due to the strong chemical binding of OA, which is demonstrated by its good reusability performance. Throughout five separate runs, the MNA-OA was shown to be a very efficient and reusable adsorbent for oily wastewater.

Characterization of the microbial community and prediction of metabolic functions in an anaerobic/oxic system with magnetic micropolystyrene as a biocarrier

Polystyrene (PS) and magnetic polystyrene (MPS) materials have been used extensively in wastewater treatment. In this research, a 55-day anaerobic/oxic process was carried out to evaluate the effects of PS and MPS on microorganisms under aerobic and anaerobic conditions. Scanning electron microscopy results revealed differences in the entanglement state of the sludge with the biocarrier due to differences in surface morphology. High-throughput sequencing analysis showed that the microbial communities differed considerably in the presence of PS and MPS addition under both aerobic and anaerobic conditions. The highest abundance and diversity were observed in the PS reactor, with 929 observed species and a PD_whole_tree index of 91.58 under anaerobic conditions. MPS promoted the enrichment of bacteria related to nitrogen recycling such as Nitrospirota which increased from 1.13% in the seeding sludge to 3.48% and 10.07% in the aerobic reactors with PS and MPS, respectively. Moreover, advanced analysis showed that PS inhibited many microbial functions (e.g., protein export, nitrogen metabolism), and MPS alleviated this inhibition. This study provides significant insights into the microbial effects of PS and MPS and may shed light on biocarrier selection in future studies.

A review on the effectiveness of nanocomposites for the treatment and recovery of oil spill

The introduction of unintended oil spills into the marine ecosystem has a significant impact on aquatic life and raises important environmental concerns. The present review summarizes the recent studies where nanocomposites are applied to treat oil spills. The review deals with the techniques used to fabricate nanocomposites and identify the characteristics of nanocomposites beneficial for efficient recovery and treatment of oil spills. It classifies the nanocomposites into four categories, namely bio-based materials, polymeric materials, inorganic-inorganic nanocomposites, and carbon-based nanocomposites, and provides an insight into understanding the interactions of these nanocomposites with different types of oils. Among nanocomposites, bio-based nanocomposites are the most cost-effective and environmentally friendly. The grafting or modification of magnetic nanoparticles with polymers or other organic materials is preferred to avoid oxidation in wet conditions. The method of synthesizing magnetic nanocomposites and functionalization polymer is essential as it influences saturation magnetization. Notably, the inorganic polymer-based nanocomposite is very less developed and studied for oil spill treatment. Also, the review covers some practical considerations for treating oil spills with nanocomposites. Finally, some aspects of future developments are discussed. The terms "Environmentally friendly," "cost-effective," and "low cost" are often used, but most of the studies lack a critical analysis of the cost and environmental damage caused by chemical alteration techniques. However, the oil and gas industry will considerably benefit from the stimulation of ideas and scientific discoveries in this field.

High positively charged Fe3O4 nanocomposites for efficient and recyclable demulsification of hexadecane-water micro-emulsion

Oily wastewater not only causes major environmental issues, but also threatens human health. Magnetic nanoparticles (MNPs) are an attractively alternative commercial demulsifiers for their recyclability and high surface area. The wettability and surface charge of magnetic materials are significant factors in oily wastewater treatment. However, the specific influence of surface charge on the demulsification performance has not been rigorously investigated. Herein, a series of MNPs coated by dimethyl-diallyl-ammonium chloride (PDDA) and fulvic acid (FA) (Fe₃O₄/FA/PDDA) with different surface positive charges were synthesized by adjusting the PDDA concentrations and applied in demulsification of hexadecane-water micro-emulsion. The oil-water separation efficiency (Es) was enhanced gradually with increasing the surface positive charge of demulsifiers. Derjaguin-Landau-Verwey-Overbeek (DLVO) theory confirmed that with increasing surface positive potential, the electrostatic attraction between demulsifiers and oil droplets increased, and thus, Es increased. In addition, the superior Es of Fe₃O₄/FA MNPs for hexadecyl trimethyl ammonium bromide (CTAB)-stabilized micro-emulsions and Fe₃O₄/FA/PDDA MNPs for sodium dodecyl sulfate (SDS)-stabilized micro-emulsions further confirmed that electrostatic force was critical in demulsification. The high positively charged Fe₃O₄/FA/PDDA MNPs can be used as an efficient and recyclable demulsifier for hexadecane-water micro-emulsion. This study provides a theoretical basis for designing demulsifiers.