Evaluation of continuous and intermittent trickling strategies for the removal of hydrogen sulfide in a biotrickling filter

Sulfur-containing substances in sewers: Transformation, transportation, and remediation

Sulfur-containing substances in sewers frequently incur unpleasant odors, corrosion-related economic loss, and potential human health concerns. These observations are principally attributed to microbial reactions, particularly the involvement of sulfate-reducing bacteria (SRB) in sulfur reduction process. As a multivalent element, sulfur engages in complex bioreactions in both aerobic and anaerobic environments. Organic sulfides are also present in sewage, and these compounds possess the potential to undergo transformation and volatilization. In this paper, a comprehensive review was conducted on the present status regarding sulfur transformation, transportation, and remediation in sewers, including both inorganic and organic sulfur components. The review extensively addressed reactions occurring in the liquid and gas phase, as well as examined detection methods for various types of sulfur compounds and factors affecting sulfur transformation. Current remediation measures based on corresponding mechanisms were presented. Additionally, the impacts of measures implemented in sewers on the subsequent wastewater treatment plants were also discussed, aiming to attain better management of the entire wastewater system. Finally, challenges and prospects related to the issue of sulfur-containing substances in sewers were proposed to facilitate improved management and development of the urban water system.

Regenerative one-stage catalytic absorption process with cupric ions for removal of reduced sulfur compounds in polluted air

Reduced volatile sulfur compounds emitted from e.g. livestock production and biogas production facilities contribute to general air pollution and local odour nuisance. Improved technologies are required to mitigate the emissions of both hydrogen sulfide and organic sulfur compounds. The present study examines the oxidative absorption of reduced sulfur compounds, i.e. hydrogen sulfide, methanethiol and dimethyl sulfide in a wet oxidation process with cupric chloride. It was found that this process efficiently removes both hydrogen sulfide and methanethiol with removal efficiencies >94% under all process conditions tested, while the removal of dimethyl sulfide was in the range 20-40%. The main products determined were dimethyl disulfide, dimethyl trisulfide and elemental sulfur. It was shown that the process was more efficient than the similar process with ferric ions and higher removal could be obtained with lower residence times. Furthermore, though employing cupric ion as metal catalysts results in the production of gaseous sulfur compounds, it is estimated that this process is efficient for deodorization due to the higher odour threshold values of the product compounds and the pH range is optimal for gas streams containing CO2.

Improving NH3 and H2S removal efficiency with pilot-scale biotrickling filter by co-immobilizing Kosakonia oryzae FB2-3 and Acinetobacter baumannii L5-4

In this study, two NH₄⁺-N and S^2- removal strains, namely, Kosakonia oryzae (FB2-3) and Acinetobacter baumannii (L5-4), were isolated from the packing materials in a long-running biotrickling filter (BTF). The removal capacities of combined FB2-3 and L5-4 (FB2-3 + L5-4) toward 100 mg L^-1 of NH₄⁺-N and 200 mg L^-1 of S^2- reached 97.31 ± 1.62% and 98.57 ± 1.12% under the optimal conditions (32.0 °C and initial pH = 7.0), which were higher than those of single strain. Then, FB2-3 and L5-4 liquid inoculums were prepared, and their concentrations respectively reached 1.56 × 10⁹ CFU mL^-1 and 1.05 × 10⁹ CFU mL^-1 by adding different resuspension solutions and protective agents after 12-week storage at 25 °C. Finally, pilot-scale BTF test showed that NH₃ and H₂S in the real exhaust gases from a pharmaceutical factory were effectively removed with removal rates > 87% and maximum elimination capacities were reached 136 g (NH₃) m^-3 h^-1 and 176 g (H₂S) m^-3 h^-1 at 18 °C-34 °C and pH 4.0-7.0 in the BTF loaded with bamboo charcoal packing materials co-immobilized with FB2-3 and L5-4. After co-immobilization of FB2-3 and L5-4, in the bamboo charcoal packing materials, the new microbial diversity composition contained the dominant genera of Acinetobacter, Mycobacterium, Kosakonia, and Sulfobacillus was formed, and the diversity of entire bacterial community was decreased, compared to the control. These results indicate that FB2-3 and L5-4 have potential to be developed into liquid ready-to-use inoculums for effectively removing NH₃ and H₂S from exhaust gases in BTF.

New insight into the enhanced ozonation of malodorous compounds by Cu(II): Inhibiting the formation of free radicals to promote ozone utilization

Metal-enhanced ozonation can greatly improve the decay of organic matter; however, whether this method benefits the decay of malodorous compounds or not and the possible mechanism are not well understood. In this study, nine typical malodorous compounds were selected to reveal that Cu(II)-enhanced ozonation can greatly promote the decay of fatty amines because of the direct ozone oxidation, which was enhanced to promote ozone utilization. Moreover, trace Cu(II) can amplify the observed rate constants of dimethylamine and trimethylamine for 48.9% and 155.7%, respectively, and Cu(II) dosage was the determining factor using response surface methodology to investigate the interactions between initial pH, Cu(II) dosage and ozone dosage. These results demonstrated that the formation of ^•OH and O₂^•- was inhibited rather than promoted, which was quite different from some previously reported Cu(II)-enhanced ozonation counterparts. Moreover, the enhanced effect of trace Cu(II) was exhibited in both single and complex malodorous compounds. The conversion pathway of nitrogen and sulfur elements was clarified, with the targeted mineralization of nitrogen of nitrogen-containing malodorous compounds into NO₃-N and the odor characteristics of sulfur-containing malodorous compounds disappeared. These findings provided new insight for utilizing metal ions to enhance the direct ozone oxidation capacity of malodorous compounds.

Odors Emitted from Biological Waste and Wastewater Treatment Plants: A Mini-Review

In recent decades, a new generation of waste treatment plants based on biological treatments (mainly anaerobic digestion and/or composting) has arisen all over the world. These plants have been progressively substituted for incineration facilities and landfills. Although these plants have evident benefits in terms of their environmental impact and higher recovery of material and energy, the release into atmosphere of malodorous compounds and its mitigation is one of the main challenges that these plants face. In this review, the methodology to determine odors, the main causes of having undesirable gaseous emissions, and the characterization of odors are reviewed. Finally, another important topic of odor abatement technologies is treated, especially those related to biological low-impact processes. In conclusion, odor control is the main challenge for a sustainable implementation of modern waste treatment plants.