Amine- and thiol-bifunctionalized mesoporous silica material for immobilization of Pb and Cd: Characterization, efficiency, and mechanism

Cardiac Myosin and Thin Filament as Targets for Lead and Cadmium Divalent Cations

Lead and cadmium are heavy metals widely distributed in the environment and contribute significantly to cardiovascular morbidity and mortality. Using Leadmium Green dye, we have shown that lead and cadmium enter cardiomyocytes, distributing throughout the cell. Using an in vitro motility assay, we have shown that sliding velocity of actin and native thin filaments over myosin decreases with increasing concentrations of Pb2+ and Cd2+. Significantly lower concentrations of Pb2+ and Cd2+ (0.6 mM) were required to stop sliding of thin filaments over myosin compared to the stopping actin sliding over the same myosin (1.1-1.6 mM). Lower concentration of Cd2+ (1.1 mM) needed to stop actin sliding over myosin compared to the Pb2++Cd2+ combination (1.3 mM) and lead alone (1.6 mM). There were no differences found in the effects of lead and cadmium cations on relative force developed by myosin heads or number of actin filaments bound to myosin. Sliding velocity of actin over myosin in the left atrium, right and left ventricles changed equally when exposed to the same dose of the same metal. Thus, we have demonstrated for the first time that Pb2+ and Cd2+ can directly affect myosin and thin filament function, with Cd2+ exerting a more toxic influence on myosin function compared to Pb2+.

Insights into emulsion synthesis of self-assembled suprastructures formed by Janus silica particles with -NH2/-SH surface groups

Spherical particles with tunable anisotropic structures enabled by multiple surface functionalities have garnered interest for their potential applications in adsorption technologies. The presence of diverse functional groups in the surface layer, exhibiting varying acidity and hydrophilicity, can lead to unique characteristics in terms of surface structure and behaviour. In this study, the particles were synthesised using a two-step approach involving surface functionalisation of previously synthesised SiO2 Stöber particles. This was achieved by employing 3-mercaptopropyltrimethoxysilane (MPTMS) and 3-aminopropyltrimethoxysilane (APTMS) in a toluene-in-water emulsion. The resulting particles were found to be nonporous, with a specific surface area of 8 m2 g-1. Their sizes were determined to be up to 350 nm through photon cross-correlation spectroscopy. Moreover, the particles exhibited a high net content of functional groups (both amino and mercapto) of 2 mmol g-1. The organisation of the particles during synthesis was observed through SEM images, providing insights into their structural characteristics. Additionally, the study of Eu(iii), Au(iii), and Ag(i) ions and fluorescein adsorption demonstrated varying interactions on the surface, highlighting the potential applications and versatility of these functionalised particles.

Covalent organic frameworks based hierarchical porous hybrid monolithic capillary: Synthesis, characterization, and applications in trace metals analysis

The preparation of hierarchical porous monolithic column with high covalent organic frameworks (COF) loading and micropores accessibility is challenging due to the easy aggregability and sedimentation of COFs. Herein, a novel strategy based on high internal phase emulsion (HIPE) polymerization was proposed for preparing COF hybrid capillary monolithic column with hierarchical porosity. COFs with different frameworks including imine COFs (COF-OMe, COF-F and COF-SH), triazine COF (CTF-1) and boron-based COF (COF-5) were selected to investigate the universality of the preparation strategy. The presence of COF in the monolithic capillary was confirmed by scanning electron microscope, X-ray diffraction and fourier transform infrared spectroscopy. Nitrogen adsorption/desorption experiments and thermogravimetric analysis showed that the prepared COF hybrid monolithic capillary exhibited high COF loading (e.g., 28.7% for COF-SH) and accessibility (e.g., 98.5% for COF-SH), mainly due to the thin walls of void-window structures originated from polymerization of HIPE. The successful preparation of water-stable COF-F, COF-OMe, COF-SH and CTF-1 hybrid monolithic columns demonstrated the proposed synthesis strategy is universal to water-stable COF without tedious optimization of dispersion system, effectively avoiding the sedimentation of COF in pre-polymerization solution. Then, the sulfhydryl-modified COF hybrid polymer (poly(COF-SH-HIPE)) monolithic column was evaluated for the extraction of heavy metal ions, and a method based on poly(COF-SH-HIPE) monolithic capillary microextraction on-line coupled with inductively coupled plasma mass spectrometry detection was developed for analysis of trace Cd, Hg and Pb in human fluid samples.

New insights into the environmental application of hybrid nanoparticles in metal contaminated agroecosystem: A review

Heavy metals (HMs) contamination in agricultural soils is a major constraint to provide safe food to society. Cultivation of food crops on these soils, channels the HMs into the food chain and causes serious human health and socioeconomic problems. Multiple conventional and non-conventional remedial options are already in practice with variable success rates, but nanotechnology has proved its success due to higher efficiency. It also led the hypothesis to use hybrid nanoparticles (HNPs) with extended benefits to remediate the HMs and supplement nutrients to enhance the crop yield in the contaminated environments. Hybrid nanoparticles are defined as exclusive chemical conjugates of inorganic and/or organic nanomaterials that are combinations of two or more organic components, two or more inorganic components, or at least one of both types of components. HNPs of different elements like essential nutrients, beneficial nutrients and carbon-based nanoparticles are used for the remediation of metals contaminated soil and the production of metal free crops. Characterizing features of HNPs including particle size, surface area, reactivity, and solubility affect the efficacy of these HNPs in the contaminated environment. Hybrid nanoparticles have great potential to remove the HMs ions from soil solution and restrict their ingress into the root tissues. Furthermore, HNPs of essential nutrients not only compete with heavy metal uptake by plants but also fulfill the need of nutrients. This review provides a comprehensive overview of the challenges associated with application of HNPs in contaminated soils, environmental implications, their remediation ability, and factors affecting their dynamics in environmental matrices.

Direct Effects of Toxic Divalent Cations on Contractile Proteins with Implications for the Heart: Unraveling Mechanisms of Dysfunction

The binding of calcium and magnesium ions to proteins is crucial for regulating heart contraction. However, other divalent cations, including xenobiotics, can accumulate in the myocardium and enter cardiomyocytes, where they can bind to proteins. In this article, we summarized the impact of these cations on myosin ATPase activity and EF-hand proteins, with special attention given to toxic cations. Optimal binding to EF-hand proteins occurs at an ionic radius close to that of Mg²⁺ and Ca²⁺. In skeletal Troponin C, Cd²⁺, Sr²⁺, Pb²⁺, Mn²⁺, Co²⁺, Ni²⁺, Ba²⁺, Mg²⁺, Zn²⁺, and trivalent lanthanides can substitute for Ca²⁺. As myosin ATPase is not a specific MgATPase, Ca²⁺, Fe²⁺, Mn²⁺, Ni²⁺, and Sr²⁺ could support myosin ATPase activity. On the other hand, Zn²⁺ and Cu² significantly inhibit ATPase activity. The affinity to various divalent cations depends on certain proteins or their isoforms and can alter with amino acid substitution and post-translational modification. Cardiac EF-hand proteins and the myosin ATP-binding pocket are potential molecular targets for toxic cations, which could significantly alter the mechanical characteristics of the heart muscle at the molecular level.

Competitive adsorption behavior of typical heavy metal ions from acid mine drainage by multigroup-functionalization cellulose: qualitative and quantitative mechanism

In response to Cd, Pb, and Cu pollution in acid mine drainage (AMD), a multigroup cellulose material (TCIS) containing thiol (-SH), carboxyl (-COOH), and imine (-C = N) groups was prepared through oxidation and grafting reactions. At pH 5, the maximum Cd(II), Pb(II), and Cu(II) adsorption performances of TCIS were 53.60, 120.6, and 36.01 mg/g, respectively. In the binary system, the interaction between metal ions was mainly inhibited by competitive adsorption. Cu(II) exhibited the most fierce inhibitory effect and had a relatively stable adsorption performance. In the ternary system, the adsorption order was Cu(II) > Cd(II) > Pb(II). In density functional theory (DFT) calculations, we combined the molecular electrostatic potentials, binding energies, differential charges, and total potentials to illustrate the competitive behavior of metal ions at different binding sites. Moreover, X-ray photoelectron spectroscopy (XPS) and DFT analysis revealed that the adsorption process of TCIS was dominated by the above functional groups, which caused competitive adsorption among Cd(II), Pb(II), and Cu(II).

Immobilization of Cd by mercapto-palygorskite in typical calcareous and acidic soil aggregates: Performance and differences

The microscale spatial heterogeneity and complexity of soil aggregates affect the properties and distribution of heavy metals (HMs). It has been confirmed that amendments can alter the distribution of Cd in soil aggregates. However, whether the Cd immobilization effect of amendments varies across soil aggregate levels remains unknown. In this study, soil classification and culture experiments were combined to explore the effects of mercapto-palygorskite (MEP) on Cd immobilization in soil aggregates of different particle sizes. The results showed that a 0.05-0.2% MEP application decreased soil available Cd by 53.8-71.62% and 23.49-36.71% in calcareous and acidic soils, respectively. The Cd immobilization efficiency of MEP in calcareous soil aggregates was in the following order: micro-aggregates (66.42-80.19%) > bulk soil (53.78-71.62%) > macro-aggregates (44.00-67.51%), while the efficiency in acidic soil aggregates was inconsistent. In MEP-treated calcareous soil, the percentage change in Cd speciation in micro-aggregates were higher than that in macro-aggregates, whereas there was no significant difference in Cd speciation between the four acidic soil aggregates. Mercapto-palygorskite addition in micro-aggregates of calcareous soil increased the available Fe and Mn concentrations by 20.98-47.10% and 17.98-32.66%, respectively. Mercapto-palygorskite had no effect on soil pH, EC, CEC, and DOC values, while the difference in soil properties between the four particle sizes was the main influencing factor of MEP treatments on Cd in calcareous soil. The effects of MEP on HMs varied across soil aggregates and soil types, but had strong specificity and selectivity for Cd immobilization. This study illustrates the influence of soil aggregates on Cd immobilization using MEP, which can be used to guide the remediation of Cd-contaminated calcareous and acidic soils.

Heavy metal stabilization remediation in polluted soils with stabilizing materials: a review

The remediation of soil contaminated by heavy metals has long been a concern of academics. This is due to the fact that heavy metals discharged into the environment as a result of natural and anthropogenic activities may have detrimental consequences for human health, the ecological environment, the economy, and society. Metal stabilization has received considerable attention and has shown to be a promising soil remediation option among the several techniques for the remediation of heavy metal-contaminated soils. This review discusses various stabilizing materials, including inorganic materials like clay minerals, phosphorus-containing materials, calcium silicon materials, metals, and metal oxides, as well as organic materials like manure, municipal solid waste, and biochar, for the remediation of heavy metal-contaminated soils. Through diverse remediation processes such as adsorption, complexation, precipitation, and redox reactions, these additives efficiently limit the biological effectiveness of heavy metals in soils. It should also be emphasized that the effectiveness of metal stabilization is influenced by soil pH, organic matter content, amendment type and dosage, heavy metal species and contamination level, and plant variety. Furthermore, a comprehensive overview of the methods for evaluating the effectiveness of heavy metal stabilization based on soil physicochemical properties, heavy metal morphology, and bioactivity has also been provided. At the same time, it is critical to assess the stability and timeliness of the heavy metals' long-term remedial effect. Finally, the priority should be on developing novel, efficient, environmentally friendly, and economically feasible stabilizing agents, as well as establishing a systematic assessment method and criteria for analyzing their long-term effects.

Immobilization of soil Cd by sulfhydryl grafted palygorskite in wheat-rice rotation mode: A field-scale investigation

The safe utilization of heavy metal contaminated farmland has attracted extensive attention of the whole society, and there is an urgent need to develop novel high-efficiency amendments. To clarify the actual remediation effect and potential for large-scale application of sulfhydryl grafted palygorskite (SGP) in Cd polluted soil in wheat-rice rotation mode, a field-scale experiment was conducted. SGP at the dosages of 0.5 g/kg-2.0 g/kg could reduce gain Cd contents by 27.15-59.05% and 16.16-79.47% for wheat and rice, respectively. The maximal decreases of soil available Cd figured out by DTPA extraction in wheat and rice season were 58.18% and 33.67%, respectively. The immobilization ratio for Cd was much more than that of trace elements, including Fe, Mn, Cu, and Zn, Ni. SGP showed an effective immobilization rate for soil Cd under the interference of many elements in the soil, pointing to the targeting and selectivity of its high-efficiency immobilization. It had no lifting effect on soil pH but decreased zeta potentials of soil particles. The sorption of Cd²⁺ on SGP amended soil could be fitted by the second-order kinetic model and Langmuir isotherm, and the changes of thermodynamic parameters showed SGP strengthened the fixation. SGP made the biological accumulation coefficient and transfer factor of rice grain drop dramatically but had no noticeable effect on these parameters of winter wheat, indicating different botanical responses. SGP as a novel immobilization amendment may provide an efficient and sustainable solution for the remediation of contaminated soil in wheat-rice rotation mode in field-scale.