Photocatalytic degradation of cefixime in aqueous solutions using functionalized SWCNT/ZnO/Fe3O4 under UV-A irradiation

Surface modified of chitosan by TiO2@MWCNT nanohybrid for the efficient removal of organic dyes and antibiotics

Considering the increase in the discharge of industrial effluents containing dyes and antibiotic resistance as a consequence of increasing the prescription and easy distribution of antibiotic drugs at the global level, designing efficient, biodegradable and non-toxic absorbents is necessary to reduce environmental harm effects. Herein, we present a series of novel eco-friendly ternary hybrid nanocomposite hydrogels CS/TiO2@MWCNT (CTM) composed of chitosan (CS), TiO2, and multiwalled carbon nanotube (MWCNT) for removal of methylene blue (MB) and methyl orange (MO) and common antibiotic ciprofloxacin (CIP) in aqueous medium. The combination of MWCNT and TiO2 improves the physicochemical properties of CS hydrogel and increases the adsorption capacity toward pollutants in the presence of different loadings. CTM hydrogel showed a specific surface area of 236.45 m2 g-1 with a pore diameter of 7.89 nm. Adsorption mechanisms were investigated in detail using kinetic, isotherm, and thermodynamic studies of adsorption as well as various spectroscopic techniques. Adsorption of these pollutants by CTM nanocomposite hydrogel occurred using various interactions at different pHs, which showed the obvious dependence of CTM adsorption capacity on pH. Electrostatic attractions, complex formation, π-π stacking and hydrogen bonds played a key role in the adsorption process. The adsorption of MB, MO, and CIP was fitted with the Langmuir isotherm with maximum adsorption capacities of 531.91, 1763.6, and 1510.5 mg g-1, respectively. CTM had a minor decrease in adsorption strength and showed good structural stability even after 8 adsorptions-desorption cycles. The total cost of producing a 1 kg adsorbent was calculated to be $ 450, which helped us determine the economic feasibility of the adsorbent in large-scale applications.

Comparison of modeling, optimization, and prediction of important parameters in the adsorption of cefixime onto sol-gel derived carbon aerogel and modified with nickel using ANN, RSM, GA, and SOLVER methods

Today, the main goal of many researchers is the use of high-performance, economically and industrially justified materials, as well as recyclable materials in removing organic and dangerous pollutants. For this purpose, sol-gel derived carbon aerogel modified with nickel (SGCAN) was used to remove Cefixime from aqueous solutions. The influence of important parameters in the cefixime adsorption onto SGCAN was modeled and optimized using artificial neural network (ANN), response surface methodology (RSM), genetic algorithm (GA), and SOLVER methods. R software was applied for this purpose. The design range of the runs for a time was in the range of 5 min-70 min, concentration in the range of 5 mg L-1 to 40 mg L-1, amount of adsorbent in the range of 0.05 g L-1 to 0.15 g L-1, and pH in the range of 2.0-11. The results showed that the ANN model due to lower Mean Squared Error (MSE), Sum of Squared Errors (SSE), and Root Mean Squared Error (RMSE) values and also higher R2 is a superior model than RSM. Also, due to the superiority of ANN over the RSM model, the optimum results were calculated based on GA. Based on GA, the highest Cefixime adsorption onto SGCAN was obtained in pH, 5.98; reaction time, 58.15 min; initial Cefixime concentration, 15.26 mg L-1; and adsorbent dosage, 0.11 g L-1. The maximum adsorption capacity of Cefixime onto SGCAN was determined to be 52 mg g-1. It was found the pseudo-second-order model has a better fit with the presented data.

Safe Disposal of Accident Wastewater in Chemical Industrial Parks Using Non-Thermal Plasma with ZnO-Fe3O4 Composites

Chemical wastewater has a high concentration of toxic and hazardous antibiotic pollutants, which not only devastates the ecological environment and disrupts the ecological balance, but also endangers human health. This research proposed a non-thermal plasma (NTP) combined with a ZnO-Fe3O4 nano-catalyst system to achieve the efficient degradation of ciprofloxacin (CIP) in chemical wastewater. Firstly, ZnO-Fe3O4 composite materials were prepared using hydrothermal method and characterized with scanning electron microscopy (SEM), transmission electron microscope (TEM), X-ray diffractometer (XRD), X-ray photoelectron spectroscopy (XPS), etc. With the sole NTP, NTP/ZnO, and NTP/ZnO-Fe3O4 systems, the removal efficiency of CIP can reach 80.1%, 88.2%, and 99.6%, respectively. The optimal doping amount of Fe3O4 is 14%. Secondly, the capture agent experiment verified that ·OH, ·O2-, and 1O2 all have a certain effect on CIP degradation. Then, liquid chromatography-mass spectrometry (LC-MS) was used to detect the intermediate and speculate its degradation pathway, which mainly included hydroxyl addition, hydroxyl substitution, and piperazine ring destruction. After treatment with the NTP/ZnO-Fe3O4 system, the overall toxicity of the product was reduced. Finally, a cyclic experiment was conducted, and it was found that the prepared ZnO-Fe3O4 catalyst has good reusability. The NTP/ZnO-Fe3O4 was also applied in practical pharmaceutical wastewater treatment and has practical applicability.

S-scheme heterojunction of hollow corncob-like ZnIn2S4/LaFeO3 for water splitting and tetracycline degradation

Reasonable design of heterojunction photocatalysts with high-quality interfacial coupling is an effective way to improve the photocatalytic activity of semiconductors. Herein, we successfully decorated Zinc indium sulfide (ZnIn2S4, ZIS) on perovskite Lanthanum ferrite (LaFeO3, LFO) with more active sites by a pre-hydrothermal combined post-calcination method, and constructed S-scheme heterojunction photocatalyst with a unique hollow corncob-like morphology for efficient photocatalytic hydrogen production and tetracycline (TC) degradation. When the mass ratio of LFO is 35% and 15%, the ZIS/LFO photocatalyst exhibits the best hydrogen evolution rate and TC photodegradation performance, respectively. Notably, the optimum hydrogen production rate is 6 times that of pure ZIS with excellent cycling stability. The enhanced photoactivity can be explained by the hollow corncob-like morphology and the formed S-scheme heterojunction with close interface contact between ZIS and LFO, which significantly improves the spatial separation and migration efficiency of photoexcited carriers, while maintaining a high redox potential. Finally, it provides an effective support for the photocatalytic mechanism through calculation results of density functional theory. This work not only provides a novel construction strategy of photocatalysts for efficient photocatalytic hydrogen evolution and organic pollutant degradation, but also opens up a new insight for perovskite-modified S-scheme heterojunction.

Visible light-driven ZnO/Fe3O4 magnetic nanoparticles for detoxification of diazinon: the photocatalytic optimization process with RSM-BBD model

Today, diazinon is one of the most widely used organophosphorus pesticides, whose widespread use can cause many ecological and biological risks. In this research, a magnetic ZnO/Fe3O4 nanoparticle was used to investigate the photocatalytic degradation of diazinon. Sol-gel synthesis was used to create the nanoparticle, which was then characterized using XRD, FTIR, FESEM, VSM, and XPS techniques. The design of photocatalytic degradation experiments was done using the response surface method and the Box-Behnken design model. The investigated parameters include pH, nanoparticle concentration, diazinon concentration, and irradiation time. The characterization of the ZnO/Fe3O4 nanoparticle showed well-formed crystalline phases and a cubic spinel structure. Additionally, the shape of the nanoparticle is almost uniform and spherical. The FT-IR spectrum also confirmed the presence of all functional groups related to ZnO and Fe3O4 in the ZnO/Fe3O4 nanoparticles structure. The synthesized nanocomposite has superparamagnetic properties and a very small coercive field, making it easily recyclable, according to a VSM analysis. XPS results also showed the presence of Fe (Fe 2p1/2 and Fe 2p3/2), Zn (Zn 2p1/2 and Zn 2p3/2), oxygen (O1s), and weak carbon (C1s) peaks in the ZnO/Fe3O4 structure. The results of the photocatalytic optimization experiments showed that the highest efficiency of diazinon toxin degradation is 99.3% under the conditions of pH 7, diazinon initial concentration of 10 mg/L, nanoparticle concentration of 1 g/L, and a contact time of 90 min. This result is very close to the BBD model's predicted removal efficiency under optimal conditions (100%). As a result, the ZnO/Fe3O4 nanocomposite can produce active free radicals through UV radiation, and these radicals can successfully remove diazinon under actual conditions.

Synthesis and characterization of rGO/Fe0/Fe3O4/TiO2 nanocomposite and application of photocatalytic process in the decomposition of penicillin G from aqueous

In this study, we synthesized rGO/Fe⁰/Fe₃O₄/TiO₂ nanocomposite according to Hummer's, and straightforward sol-gel method. The FESEM, EDX, TEM, FT-IR, XRD, BET, UV spectra, and VSM analysis were applied to determine the catalyst properties. Optimization of influence parameters on photocatalytic process performance to penicillin G degradation in aqueous media. pH (4-8), nanocomposite dose (10-20 mg/L), reaction time (30-60 min), and penicillin G concentration (50-100 mg/L) were optimized via central composite design. In the optimum condition of PCP, supplementary studies were done. As a result of the analysis, the nanocomposite was well synthesized and displayed superior photocatalytic properties for degrading organic pollutants. In addition to being magnetically separable, the synthesized rGO/Fe⁰/Fe₃O₄/TiO₂ nanocomposite exhibits high recyclability up to 5 times. The quadratic model of optimization is based on the adjusted R²(0.99), and predicated R²(0.97) suggested. According to the analysis of variance test, the model was significant (F-Value = 162.95, P-Value = 0.0001). Photocatalytic process is most efficiently decomposed at pH = 6.5, catalyst dose = 18.5 mg/L, reaction time = 59.1 min, and penicillin G concentration = 52 mg/L (efficiency = 96%). The chemical oxygen demand and total organic carbon decrease were 78, and 65%. The photolysis and adsorption mechanism as a single mechanism had lower performance in penicillin G degradation. Benzocaine had the greatest effect on reducing the efficiency of the process as a radical scavenger. The °OH, h^+, and O₂^●- were the main reactive oxidant species in penicillin G removal. Phenoxyacetaldehyde, Acetanilide, Diacetamate, Phenylalanylglycine, N-Acetyl-l-phenylalanine, Diformyldapsone, and Succisulfone were the main intermediates in penicillin G degradation. The results indicated the photocatalytic process with rGO/Fe⁰/Fe₃O₄/TiO₂ nanocomposite on a laboratory scale has good efficiency in removing penicillin G antibiotic. The application of real media requires further studies.

Heterostructure charge transfer dynamics on self-assembled ZnO on electronically different single-walled carbon nanotubes

The charge transfer kinetics of the catalyst particles play a key role in advanced oxidation processes (AOP) for the complete destruction of recalcitrant and persistent contaminants in water. Here, a significant improvement in the photocatalytic performance is observed in the Single-Walled Carbon Nanotube (SWCNT)-ZnO heterostructure photocatalyst. The charge transfer dynamics and factors affecting AOP are studied using ZnO nanoparticles self-assembled onto three electronically different SWCNTs (metallic, semiconducting, and pristine) via the precipitation method, introducing a heterojunction interface. The creation of the SWCNT/ZnO heterostructure interface improves charge transfer and separation, resulting in a charge carrier lifetime of 7.37 ns. Also, surface area, pore size, and pore volumes are increased by 4.2 times compared to those of ZnO. The nanoparticles-coated face-mask fabric used as the floating photocatalyst exhibited high stability and recyclability with 99% RhB degradation efficiency under natural sunlight and 94% under UV light after the 5th cycle. The surface and crystal defects-oxygen or zinc defects/interstitials open new reaction active sites that assist in charge carrier transfer and act as pollutant absorption and interaction sites for enhanced performance. The ideal band edge positions of the valence band and conduction band favor the generation of H2O/OH•, OH·/OH, and O2/HO2• reactive oxygen species. OH• radicals are found to play a vital role in this AOP by using ethanol as an OH• scavenger.

Improved catalytic performance of ZnO via coupling with CoFe2O4 and carbon nanotubes: A new, photocatalysis-mediated peroxymonosulfate activation system, applied towards Cefixime degradation

In this study, a ternary ZnO@spinel cobalt ferrite@carbon nanotube magnetic photocatalyst (ZSCF@CNT) was successfully synthesized and used to activate peroxymonosulfate (PMS) for Cefixime (CFX) antibiotic degradation under UVC irradiation. The morphology, optical, structural, and physicochemical properties of ZSCF@CNT were characterized and analyzed by XPS, XRD, FESEM-EDX, TEM, BET, VSM, UV-vis DRS and PL analysis. The results indicated that the ternary ZSCF@CNT photocatalyst exhibited superior catalytic activity on CFX elimination than that of individual components and binary composite catalysts, in which CFX with was rapidly removed under UVC irradiation and PMS. The effect of operational parameters including initial PMS, catalyst, and CFX concentrations and solution pH on the catalytic activity was investigated in detail; the optimal conditions were: pH: 7.0, catalyst: 0.3 g/L, PMS: 3.0 mM, leading to total CFX (10 mg/L) elimination in ∼20 min. Based on the radical scavenger tests, various radicals and non-radical species including sulfate, hydroxyl and superoxide radicals, singlet oxygen and electrons were involved in the ZSCF@CNT/PMS/UVC system. The high surface area, reduced agglomeration formation and excellent separation of photogenerated electron-hole pairs embodied in ZSCF@CNT photocatalyst conferred its superior catalytic activity and stability. The results from the tests in real water matrices revealed that ZSCF@CNT could be a promising photocatalyst to activate PMS for actual aqueous matrices' treatment.

Recent Advances in Carbon-Based Materials for Adsorptive and Photocatalytic Antibiotic Removal

Antibiotics have been a primary environmental concern due to their widespread dispersion, harmful bioaccumulation, and resistance to mineralization. Unfortunately, typical processes in wastewater treatment plants are insufficient for complete antibiotic removal, and their derivatives in effluent can pose a threat to human health and aquatic communities. Adsorption and photocatalysis are proven to be the most commonly used and promising tertiary treatment methods. Carbon-based materials, especially those based on graphene, carbon nanotube, biochar, and hierarchical porous carbon, have attracted much attention in antibiotic removal as green adsorbents and photocatalysts because of their availability, unique pore structures, and superior physicochemical properties. This review provides an overview of the characteristics of the four most commonly used carbonaceous materials and their applications in antibiotic removal via adsorption and photodegradation, and the preparation of carbonaceous materials and remediation properties regarding target contaminants are clarified. Meanwhile, the fundamental adsorption and photodegradation mechanisms and influencing factors are summarized. Finally, existing problems and future research needs are put forward. This work is expected to inspire subsequent research in carbon-based adsorbent and photocatalyst design, particularly for antibiotics removal.

Activated Carbon-Loaded Titanium Dioxide Nanoparticles and Their Photocatalytic and Antibacterial Investigations

Activated carbon doping TiO2 nanoparticles were synthesised by zapota leaf extract using the co-precipitation method. The bio-constituents of plant compounds were used in the reactions of stabilization and reductions. The carbon loading on the TiO2 nanoparticles was characterised by XRD, FTIR, UV-DRS, SEM with EDX, and TEM analysis. The loading of activated carbon onto the TiO2 nanoparticles decreased the crystallite size and optical bandgap, and their doping improved the surface structure of AC/TiO2 nanoparticles. Mesoporous/microporous instability was remodified from the activated carbon, which was visualised using SEM and TEM analysis, respectively. The photocatalytic dye degradation of Rh-B dye was degraded in TiO2 and AC/TiO2 nanoparticles under visible light irradiation. The degradation efficiencies of TiO2 and AC/TiO2 nanoparticles were 73% and 91%, respectively. The bacterial abilities of TiO2 and AC/TiO2 nanoparticles were examined by E. coli and S. aureus. The water reclamation efficiency and bactericidal effect of TiO2 and AC/TiO2 nanoparticles were examined via catalytic dye degradation and bacterial efficiency of activated carbon-doped titanium dioxide nanoparticles.

Fabrication of activated carbon supported modified with bimetallic-platin ruthenium nano sorbent for removal of azo dye from aqueous media using enhanced ultrasonic wave

Herein, activated carbon supported modified with bimetallic-platin ruthenium nano sorbent (PtRu@AC) was synthesized by a thermal decomposition process and used in the removal of methylene blue (MB) from aqueous solutions. The synthesized nano sorbents were characterized by X-ray Diffraction (XRD), Transmission Electron Microscopy (TEM), and X-ray Photoelectron Spectroscopy (XPS) spectroscopic techniques. The data obtained from characterization studies showed that PtRu@AC nano sorbent was highly crystalline and in a form of PtRu alloy with a monodispersed composition. The results indicated that the maximum adsorption capacity (qemax) for the removal of MB with PtRu@AC under optimum conditions was detected to be 1.788 mmol/g (569.4 mg/g). The experimental kinetic results of the study revealed that the adsorption of methylene blue was found to be more compatible with the false second-order model compared to some tested models. Calculations for thermodynamic functions including enthalpy change (ΔHo), entropy change (ΔSo), and Gibbs free energy change (ΔGo) values were performed to get an idea about the adsorption mechanism. As a result, the synthesized PtRu@AC nano adsorbent was detected as a highly effective adsorbent material in the removal of MB from aquatic mediums.

Development of electrochemical aptasensors detecting phosphate ions on TMB substrate with epoxy-based mesoporous silica nanoparticles

This study, it is aimed to develop an electrochemical aptasensor that can detect phosphate ions using 3.3'5.5' tetramethylbenzidine (TMB). It is based on the principle of converting the binding affinity of the target molecule phosphate ion (PO₄^3-) into an electrochemical signal with specific aptamer sequences for the aptasensor to be developed. The aptamer structure served as a gate for the TMB to be released and was used to trap the TMB molecule in mesoporous silica nanoparticles (MSNPs). The samples for this study were characterized by transmission electron spectroscopy (TEM), Brunner-Emmet-Teller, dynamic light scattering&electrophoretic light scattering, and induction coupled plasma atomic emission spectroscopy. According to TEM analysis, MSNPs have a morphologically hexagonal structure and an average size of 208 nm. In this study, palladium-carbon nanoparticles (Pd/C NPs) with catalytic reaction were used as an alternative to the biologically used horseradish peroxidase (HRP) enzyme for the release of TMB in the presence of phosphate ions. The limit of detection (LOD) was calculated as 0.983 μM, the limit of determination (LOQ) was calculated as 3.276 μM, and the dynamic linear phosphate range was found to be 50-1000 μM. The most important advantage of this bio-based aptasensor assembly is that it does not contain molecules such as a protein that cannot be stored for a long time at room temperature, so its shelf life is very long compared to similar systems developed with antibodies. The proposed sensor shows good recovery in phosphate ion detection and is considered to have great potential among electrochemical sensors.

An experimental and theoretical approach to electrochemical sensing of environmentally hazardous dihydroxy benzene isomers at polysorbate modified carbon paste electrode

It is well known that, surfactants provide a neutral, positive and/or negative charge on the electrode surface by forming a monolayer, which in turn affects the charge transfer and redox potential during the electroanalysis process. However, the molecular level understanding of these surfactant-modified electrodes is worth investigating because the interaction of the analyte with the electrode surface is still unclear. In this report, we used quantum chemical models based on computational density functional theory (DFT) to investigate the polysorbate 80 structure as well as the locations of energy levels and electron transfer sites. Later, the bare carbon paste electrode (bare/CPE) was modified with polysorbate 80 and used to resolve the overlapped oxidation signals of dihydroxy benzene isomers. The m/n values obtained at polysorbate/CPE was approximately equal to 1, signifying the transfer of same number of protons and electrons. Moreover, the analytical applicability of the modified electrode for the determination of catechol (CC) and hydroquinone (HQ) in tap water samples gave an acceptable recovery result. Overall, the application of DFT to understand the molecular level interaction of modifiers for sensing applications laid a new foundation for fabricating electrochemical sensors.