Catalyzed H2O2 decomposition over iron oxides and oxyhydroxides: Insights from oxygen production and organic degradation

Water Vapor Condensation Triggers Simultaneous Oxidation and Hydrolysis of Organic Pollutants on Iron Mineral Surfaces

Increasing worldwide contamination with organic chemical compounds is a paramount environmental challenge facing humanity. Once they enter nature, pollutants undergo transformative processes that critically shape their environmental impacts and associated risks. This research unveils previously overlooked yet widespread pathways for the transformations of organic pollutants triggered by water vapor condensation, leading to spontaneous oxidation and hydrolysis of organic pollutants. These transformations exhibit variability through either sequential or parallel hydrolysis and oxidation, contingent upon the functional groups within the organic pollutants. For instance, acetylsalicylic acid on the goethite surface underwent sequential hydrolysis and oxidation that first hydrolyzed to salicylic acid followed by hydroxylation oxidation of the benzene moiety driven by the hydroxyl radical (•OH). In contrast, chloramphenicol underwent parallel oxidation and hydrolysis, forming hydroxylated chloramphenicol and 2-amino-1-(4-nitrophenyl)-1,3-propanediol, respectively. The spontaneous oxidation and hydrolysis occurred consistently on three naturally abundant iron minerals with the key factors being •OH production capacity and surface binding strength. Given the widespread presence of iron minerals on Earth's surface, these spontaneous transformation paths could play a role in the fate and risks of organic pollutants of health concerns.

Roles of soil minerals in the degradation of chlorpyrifos and its intermediate by microwave activated peroxymonosulfate

Soil mineral is one of the important factors that affecting oxidant decomposition and pollutants degradation in soil remediation. In this study, the effects of iron minerals, manganese minerals and clay minerals on the degradation of chlorpyrifos (CPF) and its intermediate product 3,5,6-trichloro-2-pyridinol (TCP) by microwave (MW) activated peroxymonosulfate (PMS) were investigated. As a result, the addition of minerals had slight inhibitory effect on the degradation efficiency of CPF by MW/PMS, but the degradation efficiency of TCP was improved by the addition of some specific minerals, including ferrihydrite, birnessite, and random symbiotic mineral of pyrolusite and ramsdellite (Pyr-Ram). The stronger MW absorption ability of minerals is beneficial for PMS decomposition, but the MW absorption ability of minerals cannot be fully utilized because of the weaker MW radiation intensity under constant temperature conditions. Through electron spin resonance test, quenching experiment and electrochemical experiment, electron transfer, SO4- and OH, SO4- dominated TCP degradation by MW/PMS with the addition of birnessite, Pyr-Ram and ferrihydrite, respectively. Besides, the adsorption effect of ferrihydrite also enhanced the removal of TCP. The redox of Mn (III)/Mn (IV) or Fe (II)/Fe (III) in manganese/iron minerals participated in the generation of reactive species. In addition, the addition of minerals not only increased the variety of alkyl hydroxylation products of CPF, causing different degradation pathways from CPF to TCP, but also further degraded TCP to dechlorination or hydroxylation products. This study demonstrated the synergistic effect of minerals and MW for PMS activation, provided new insights for the effects of soil properties on soil remediation by MW activated PMS technology.

New strategy to optimize in-situ fenton oxidation for TPH contaminated soil remediation via artificial neural network approach

In-situ remediation of total petroleum hydrocarbon (TPH) contaminated soils via Fenton oxidation is a promising approach. However, determining the proper injection amount of H2O2 and Fe source over the Fenton reaction in the complex geological conditions for in-situ TPH soil remediation remains a daunting challenge. Herein, we introduced a practical and novel approach using soft computational models, a multilayer perception artificial neural network (MPLNN), for predicting the TPH removal performance. In this study, we conducted 48 sets of TPH removal experiments using Fenton oxidation to determine the TPH removal performance of a wide range of different ground conditions and generated 336 data points. As a result, a negative Pearson correlation coefficient was obtained in the Fe injection mass and the natural presence of Fe mineral in the soil, indicating that the excess of Fe could significantly retarded the TPH removal performance in the Fenton reaction. In addition, the MPLNN model with 6-6-1 training using Scaled conjugate gradient backpropagation (SCG) with tangent sigmoid as the transfer function demonstrated a high accuracy for TPH removal prediction with the correlation determination of 0.974 and mean square error value of 0.0259. The optimized MPLNN model achieved less than 20% error for predicting TPH removal performance in actual TPH-contaminated soil via Fenton oxidation. Hence, the proposed MPLNN can be useful in improving the Fenton oxidation of TPH removal performance in-situ soil remediation.

Insights into the Formation Mechanism of Reactive Oxygen Species in the Interface Reaction of SO2 on Hematite

The interplay between sulfur and iron holds significant importance in their atmospheric cycle, yet a complete understanding of their coupling mechanism remains elusive. This investigation delves comprehensively into the evolution of reactive oxygen species (ROS) during the interfacial reactions involving sulfur dioxide (SO2) and iron oxides under varying relative humidity conditions. Notably, the direct activation of water by iron oxide was observed to generate a surface hydroxyl radical (•OH). In comparison, the aging of SO2 was found to markedly augment the production of •OH radicals on the surface of α-Fe2O3 under humid conditions. This augmentation was ascribed to the generation of superoxide radicals (•O2-) stemming from the activation of O2 through the Fe(II)/Fe(III) cycle and its combination with the H+ ion to produce hydrogen peroxide (H2O2) on the acidic surface. Moreover, the identification of moderate relative humidity as a pivotal factor in sustaining the surface acidity of iron oxide during SO2 aging underscores its crucial role in the coupling of iron dissolution, ROS production, and SO2 oxidation. Consequently, the interfacial reactions between SO2 and iron oxides under humid conditions are elucidated as atmospheric processes that enhance oxidation capacity rather than deplete ROS. These revelations offer novel insights into the mechanisms underlying •OH radical generation and oxidative potential within atmospheric interfacial chemistry.

Water disinfection using hydrogen peroxide with fixed bed hematite catalyst - kinetic and activity studies

A lab-scale reactor with a fixed-bed hematite catalyst for the effective decomposition of H2O2 and bacteria inactivation was designed. The bactericidal effect is the largest at a low initial bacterial count of 2·103 CFU/L, which is typical for natural surface waters. When using a 5 mM H2O2 solution and a residence time of 104 min, the reduction in the number of E. coli bacteria is about 3.5-log. At a higher initial bacterial count of 1-2·104 CFU/L, a 5 mM H2O2 solution reduces the bacteria number by about 4-log. The H2O2 decomposition follows the log-linear kinetics of a first-order reaction while the bacterial inactivation does not. The kinetics of bacterial inactivation was described using the Weibull model in the modified form: log10(N0/N) = b · tn. The values of the non-linearity parameter n were found to be lower than 1, indicating that bacterial inactivation slows down over time. With increasing initial H2O2 concentration, the rate parameter b increases while the non-linearity parameter n decreases. With increasing temperature, both parameters increase. The stability of the catalyst has been proved by XRD, FTIR, SEM, and ICP-OES. The concentration of iron leaching into water during disinfection is much lower than the limit declared by WHO for iron in drinking water. The results show that technical-grade hematite is a promising Fenton-like catalyst for water disinfection. The fixed-bed reactor can be the basis of the mobile installations for water purification in emergencies.

Remediation of crude oil contaminated soil through an integrated biological-chemical-biological strategy

A plausible approach to remediating petroleum contaminated soil is the integration of chemical and biological treatments. Using appropriate chemical oxidation, the integrated remediation can be effectively achieved to stimulate the biodegradation process, consequently bolstering the overall remediation effect. In this study, an integrated biological-chemical-biological strategy was proposed. Both conventional microbial degradation techniques and a modified Fenton method were employed, and the efficacy of this strategy on crude oil contaminated soil, as well as its impact on pollutant composition, soil environment, and soil microorganism, was assessed. The results showed that this integrated remediation realized an overall 68.3 % removal rate, a performance 1.7 times superior to bioremediation alone and 2.1 times more effective than chemical oxidation alone, elucidating that the biodegradation which had become sluggish was invigorated by the judicious application of chemical oxidation. By optimizing the positioning of chemical treatment, the oxidization was allowed to act predominantly on refractory substances like resins, thus effectively enhancing pollutant biodegradability. Concurrently, this oxidating maneuver contributed to a significant increase in concentrations of dissolvable nutrients while maintaining appropriate soil pH levels, thereby generating favorable growth conditions for microorganism. Moreover, attributed to the proliferation and accumulation of degrading bacteria during the initial bioremediation phase, the microbial growth subsequent to oxidation showed rapid resurgence and the relative abundance of typical petroleum-degrading bacteria, particularly Proteobacteria, was substantially increased, which played a significant role in enhancing overall remediation effect. Our research validated the feasibility of biological-chemical-biological strategy and elucidated its correlating mechanisms, presenting a salient reference for the further studies concerning the integrated remediation of petroleum contaminated soil.

New Insights on Designing the Next-Generation Materials for Electrochemical Synthesis of Reactive Oxidative Species Towards Efficient and Scalable Water Treatment: A Review and Perspectives

Electrochemical water remediation technologies offer several advantages and flexibility for water treatment and degradation of contaminants. These technologies generate reactive oxidative species (ROS) that degrade pollutants. For the implementation of these technologies at an industrial scale, efficient, scalable, and cost-effective in-situ ROS synthesis is necessary to degrade complex pollutant mixtures, treat large amount of contaminated water, and clean water in a reasonable amount of time and cost. These targets are directly dependent on the materials used to generate the ROS, such as electrodes and catalysts. Here, we review the key design aspects of electrocatalytic materials for efficient in-situ ROS generation. We present a mechanistic understanding of ROS generation, including their reaction pathways, and integrate this with the key design considerations of the materials and the overall electrochemical reactor/cell. This involves tunning the interfacial interactions between the electrolyte and electrode which can enhance the ROS generation rate up to ~ 40% as discussed in this review. We also summarized the current and emerging materials for water remediation cells and created a structured dataset of about 500 electrodes and 130 catalysts used for ROS generation and water treatment. A perspective on accelerating the discovery and designing of the next generation electrocatalytic materials is discussed through the application of integrated experimental and computational workflows. Overall, this article provides a comprehensive review and perspectives on designing and discovering materials for ROS synthesis, which are critical not only for successful implementation of electrochemical water remediation technologies but also for other electrochemical applications.

Surface Processes Control the Fate of Reactive Oxidants Generated by Electrochemical Activation of Hydrogen Peroxide on Stainless-Steel Electrodes

Low-cost stainless-steel electrodes can activate hydrogen peroxide (H2O2) by converting it into a hydroxyl radical (•OH) and other reactive oxidants. At an applied potential of +0.020 V, the stainless-steel electrode produced •OH with a yield that was over an order of magnitude higher than that reported for other systems that employ iron oxides as catalysts under circumneutral pH conditions. Decreasing the applied potential at pH 8 and 9 enhanced the rate of H2O2 loss by shifting the process to a reaction mechanism that resulted in the formation of an Fe(IV) species. Significant metal leaching was only observed under acidic pH conditions (i.e., at pH <6), with the release of dissolved Fe and Cr occurring as the thickness of the passivation layer decreased. Despite the relatively high yield of •OH production under circumneutral pH conditions, most of the oxidants were scavenged by the electrode surface when contaminant concentrations comparable to those expected in drinking water sources were tested. The stainless-steel electrode efficiently removed trace organic contaminants from an authentic surface water sample without contaminating the water with Fe and Cr. With further development, stainless-steel electrodes could provide a cost-effective alternative to other H2O2 activation processes, such as those by ultraviolet light.

Harnessing the power of natural minerals: A comprehensive review of their application as heterogeneous catalysts in advanced oxidation processes for organic pollutant degradation

The release of untreated wastewater into water bodies has become a significant environmental concern, resulting in the accumulation of refractory organic pollutants that pose risks to human health and ecosystems. Wastewater treatment methods, including biological, physical, and chemical techniques, have limitations in achieving complete removal of the refractory pollutants. Chemical methods, particularly advanced oxidation processes (AOPs), have gained special attention for their strong oxidation capacity and minimal secondary pollution. Among the various catalysts used in AOPs, natural minerals offer distinct advantages, such as low cost, abundant resources, and environmental friendliness. Currently, the utilization of natural minerals as catalysts in AOPs lacks thorough investigation and review. This work addresses the need for a comprehensive review of natural minerals as catalysts in AOPs. The structural characteristics and catalytic performance of different natural minerals are discussed, emphasizing their specific roles in AOPs. Furthermore, the review analyzes the influence of process factors, including catalyst dosage, oxidant addition, pH value, and temperature, on the catalytic performance of natural minerals. Strategies for enhancing the catalytic efficiency of AOPs mediated by natural minerals are explored, mainly including physical fields, reductant addition, and cocatalyst utilization. The review also examines the practical application prospects and main challenges associated with the use of natural minerals as heterogeneous catalysts in AOPs. This work contributes to the development of sustainable and efficient approaches for organic pollutant degradation in wastewater.

Impact of aqueous environments on hydrogen peroxide activation by manganese oxides: Kinetics and the critical role of bicarbonate

MnO₂ activating H₂O₂ is a promising way in the field of advanced oxidation processes (AOPs) and in situ chemical oxidation (ISCO) to remove contaminants. However, few studies have focused on the influence of various environmental conditions on the performance of MnO₂-H₂O₂ process, which restricts the application in real world. In this study, the effect of essential environmental factors (ionic strength, pH, specific anions and cations, dissolved organic matter (DOM), SiO₂) on the decomposition of H₂O₂ by MnO₂ (ε-MnO₂ and β-MnO₂) were investigated. The results suggested that H₂O₂ degradation was negatively correlated with ionic strength and strongly inhibited under low pH conditions and with phosphate existence. DOM had a slight inhibitory effect while Br^-, Ca²⁺, Mn²⁺ and SiO₂ placed negligible impact on this process. Interestingly, HCO₃^- inhibited the reaction at low concentrations but promoted H₂O₂ decomposition at high concentrations, possibly due to the formation of peroxymonocarbonate. This study may provide a more comprehensive reference for potential application of H₂O₂ activation by MnO₂ in different water systems.

Magnetic TiO2/Fe3O4-Chitosan Beads: A Highly Efficient and Reusable Catalyst for Photo-Electro-Fenton Process

Heterogeneous photo-electro-Fenton process is an attractive technology for the removal of recalcitrant pollutants. To better exploit the presence of an irradiation source, a bifunctional catalyst with TiO2 nanoparticles embedded into an iron–chitosan matrix was developed. The catalytic activity of the catalyst was improved by the optimization of the loaded TiO2content. The prepared composite catalysts based on TiO2, Fe3O4 and chitosan were called TiO2/Fe3O4-CS beads. The best catalyst with an optimal ratio TiO2/Fe = 2 exhibited a high efficiency inthe degradation and mineralization of chlordimeform (CDM) insecticide. Under the optimum conditions (concentration of catalyst equal to 1 g L−1 and applied current intensity equal to 70 mA), a real effluent doped with 30 mg L−1 of CDM was efficiently treated, leading to 80.8 ± 1.9% TOC reduction after 6 h of treatment, with total removal of CDM after only 1 h.The generated carboxylic acids and minerals wereidentified and quantified. Furthermore, the stability and reusability of the developed catalyst was examined, and an insignificant reduction in catalytic activity was noticed forfour consecutive cycles of the photo-electro-Fenton process. Analyses using SEM, XRD and VSM showed a good stability of the physicochemical properties of the catalyst after use.

Quantitative structure-activity relationship for the oxidation of organic contaminants by peracetic acid using GA-MLR method

Peracetic acid (PAA) is considered as an effective and powerful oxidant for eliminating organic contaminants in wastewater treatment. The second-order rate constant (k_app) for the reaction of PAA with organic contaminants is practically important for evaluating their removal efficiency in wastewater treatment, but only limited numbers of k_app values are available. In this study, 70 organic compounds with various structures were selected, and the k_app of PAA with each organic compound was used to develop two quantitative structure-activity relationship (QSAR) models based on three kinds of descriptors including constitutional, quantum chemical, and the PaDEL descriptors. The genetic algorithm (GA) was applied to select the molecular descriptors, then the models developed by multiple linear regression (MLR). The most important descriptors that explain the reactivity of organic compounds with PAA are the E_HOMO for the model with the constitutional and quantum chemical descriptors. The maxHdsCH and minHdCH₂ are two most important descriptors for the model with only PaDEL descriptors. The developed models can be used to predict k_app for a wide range of organic contaminants. The accuracy of the developed models was proved by the internal, external validation and the Y-scrambling technique. The developed QSAR models using the GA-MLR method can be used as a screening tool for predicting the elimination of organic contaminants by PAA and increasing the understanding of chemical pollutant fate.