Degradation of organophosphorus flame retardants in heterogeneous photo-Fenton system driven by Fe(III)-based metal organic framework: Intermediates and their potential interference on bacterial metabolism

Iron-bearing mining reject as an alternative and effective catalyst for photo-Fenton oxidation of phenol in water

In this work, iron-bearing mining reject was employed as an alternative and potential low-cost catalyst to degrade phenol in water by photo-Fenton strategy. Various techniques, including SEM-EDS, BET, FTIR, and XRD, were applied to evaluate the material's properties. Process parameters such as hydrogen peroxide concentration, catalyst dosage, and pH were studied to determine the optimum reaction conditions ([catalyst] = 0.75 g L-1, [H2O2] = 7.5 mM, and pH = 3). Phenol degradation and mineralization efficiencies at 180 and 300 min were 96.5 and 78%, respectively. These satisfactory results can be associated with the iron amount present in the waste sample. Furthermore, the material showed high catalytic activity and negligible iron leaching even after the fourth reuse cycle. The degradation behavior of phenol in water was well represented by a kinetic model based on the Fermi function. The iron-bearing mining reject can be considered a potential photo-Fenton catalyst for phenol degradation in wastewater.

Synergistic photogeneration of reactive oxygen species by Fe species self-deposited on resorcinol-formaldehyde towards the degradation of phenols under visible light

In this study, a heterogeneous photo-Fenton catalyst of Fe species/resorcinol-formaldehyde (Fe/RF) was synthesized in the degradation process of phenols under visible light in a homogeneous photo-Fenton system. The in situ generated H2O2 by bare RF in the medium and the follow-added Fe2+ can construct homogeneous photo-Fenton system, and Fe/RF heterogeneous photo-Fenton catalyst was formed after the reaction through Fe species self-deposition. Due to the addition of Fe2+, more hydroxyl radical (·OH) generated in the homogeneous Fenton system, which lead to the higher degradation efficiency of phenols that achieved 90.5 % with 150 min. Fe/RF was subsequently formed and more C=O functional group in the structure appeared, which was beneficial to the production of H2O2. The above-mentioned results can be proved by the involved calculation and experimental results. Fe species, including Fe2+ and Fe3+, were beneficial to the conversion of reactive oxygen species (ROSs), and further improved the degradation efficiency of Phenols. Since the existence of photo-generated electrons, Fe2+ concentration in the solution can maintain a stable level. Interestingly, the degradation efficiency of Phenols was higher when Fe3+ was used instead of Fe2+ as the additive, which may be caused by the promotive effect of Fe3+ on singlet oxygen (1O2) generation. In addition, the degradation efficiency of Phenols under alkaline conditions was higher than that under acid conditions, which broke the limit of traditional Fenton process that works mostly in acidic medium. This study shows promising results in terms of synergistic photocatalytic/photo-Fenton processes for the degradation of organic pollutants in water.

Optimizing the performance of Fe-based metal-organic frameworks in photo-Fenton processes: Mechanisms, strategies and prospects

Contaminants in water pose a significant challenge as they are harmful and difficult to treat using conventional methods. Therefore, various new methods have been proposed to degrade organic pollutants in water, among which the photo-Fenton process is considered promising. In recent years, Fe-based metal-organic frameworks (Fe-MOFs) have gained attention and found applications in different fields due to their cost-effectiveness, non-toxic nature, and unique porous structure. Many researchers have applied Fe-MOFs to the photo-Fenton process in recent years and achieved good results. This review focuses on describing different strategies for enhancing the performance of Fe-MOFs in the photo-Fenton process. Also, the mechanism of MOF in the photo-Fenton process is described in detail. Finally, prospects for the application of Fe-MOFs in photo-Fenton systems for the treatment of organic pollutants in water are presented. This study provides information and ideas for researchers to use Fe-MOFs to remove organic pollutants from water by photo-Fenton process.

Occurrence and treatment effect assessment of organophosphorus flame retardants in source and drinking water, Jinan, China

The occurrence and removal efficiencies of organophosphorus flame retardants (OPFRs) by traditional treatment processes (pre-flocculation, sand filtration, and post-chlorination processes) and advanced treatment processes (i.e., ozone and granular activated carbon (GAC), ultraviolet/hydrogen peroxide (UV/H₂O₂), GAC alone, ultrafiltration membrane, nanofiltration membrane) were examined in two municipal plants and a pilot plant in Jinan, China. The concentrations of six OPFRs in raw waters were at levels of 16.8-100.0 ng/L, and three OPFRs were below the detection limits. The traditional treatment processes could not effectively remove the OPFRs (the removal efficiency was - 12.0-15.4%). The advanced oxidation with ozone and GAC (the removal efficiency was 35.6-60.3%) or UV/H₂O₂ and GAC processes (the removal efficiency was 68.0-86.7%) were more effective than the traditional water treatment processes. The removal efficiencies of ultrafiltration process for the OPFRs was 11.2-69.8% which were positively correlated with the logKow values of OPFRs. The nanofiltration membrane process with ultrafiltration membrane process as the pretreatment was the most effective process (the removal efficiencies were almost to 100%). These results imply that the combination of ultrafiltration membrane and nanofiltration membrane is an effective measure in the treatment of OPFRs in municipal drinking water plants.

Organophosphate Esters (OPEs) Flame Retardants in Water: A Review of Photocatalysis, Adsorption, and Biological Degradation

As a substitute for banned brominated flame retardants (BFRs), the use of organophosphate esters (OPEs) increased year by year with the increase in industrial production and living demand. It was inevitable that OPEs would be discharged into wastewater in excess, which posed a great threat to the health of human beings and aquatic organisms. In the past few decades, people used various methods to remove refractory OPEs. This paper reviewed the photocatalysis method, the adsorption method with wide applicability, and the biological method mainly relying on enzymolysis and hydrolysis to degrade OPEs in water. All three of these methods had the advantages of high removal efficiency and environmental protection for various organic pollutants. The degradation efficiency of OPEs, degradation mechanisms, and conversion products of OPEs by three methods were discussed and summarized. Finally, the development prospects and challenges of OPEs’ degradation technology were discussed.

Efficient biodegradation of tris-(2-chloroisopropyl) phosphate by a novel strain Amycolatopsis sp. FT-1: Process optimization, mechanism studies and toxicity changes

In this study, a newly isolated strain Amycolatopsis sp. FT-1 was confirmed to be an efficient tris-(2-chloroisopropyl) phosphate (TCPP) degrader. The maximum degradation efficiency of 100 % was achieved when glucose concentration was 6.0 g/L, TCPP concentration was 1.1 mg/L, pH was 6.3 and temperature was 35 °C. Proteome analysis indicated that TCPP was transformed into diester, monoester and ketone product through hydrolysis by phosphoesterase and oxidation mediated by proteins involved in bio-Fenton reaction. The increased expression of proteins serving as organic hydroperoxides scavenger and two subunits of xanthine dehydrogenase enabled Amycolatopsis sp. FT-1 to defend against TCPP-induced oxidative damage. Meanwhile, proteins involved in the resistance to proteotoxic stress were found to be up-regulated, including Hsp70 protein, ATP-dependent Clp protease proteolytic subunit, elongation factor G and trehalose synthesis-related enzymes. The overexpression of TetR/AcrR family transcriptional regulator and multidrug efflux transporter also benefited the survival of Amycolatopsis sp. FT-1 under TCPP stress. Luminescent bacteria test showed that biotoxicity of TCPP was remarkably decreased after biodegradation by Amycolatopsis sp. FT-1. To the best of our knowledge, this is the first study to report the biotransformation of TCPP by pure strain and to offer important insights into the proteomic mechanisms of TCPP microbial degradation.

Two-Dimensional Nanostructures in the World of Advanced Oxidation Processes

Two-dimensional compounds with nanostructural features are attracting attention from researchers worldwide. Their multitude of applications in various fields and vast potential for future technology advancements are successively increasing the research progress. Wastewater treatment and preventing dangerous substances from entering the environment have become important aspects due to the increasing environmental awareness, and increasing consumer demands have resulted in the appearance of new, often nonbiodegradable compounds. In this review, we focus on using the most promising 2D materials, such as MXenes, Bi2WO6, and MOFs, as catalysts in the modification of the Fenton process to degrade nonbiodegradable compounds. We analyze the efficiency of the process, its toxicity, previous environmental applications, and the stability and reusability of the catalyst. We also discuss the catalyst’s mechanisms of action. Collectively, this work provides insight into the possibility of implementing 2D material-based catalysts for industrial and urban wastewater treatment.