Sustainable strategy on microbial fuel cell to treat the wastewater for the production of green energy

Effect of Three Different Types of Biochar on Bioelectricity Generated from Plant Microbial Fuel Cells under Unsaturated Soil Condition

Plant microbial fuel cell (PMFC) is an emerging technology, showing promise for environmental biosensors and sustainable energy production. Despite its potential, PMFCs struggle with issues like low power output and limited drought resistance. Recent studies proposed that integrating biochar may enhance PMFC performance due to its physicochemical properties. The influence of different biochar types on PMFC efficiency has been minimally explored. This study aims to fill this gap by evaluating the performance of PMFCs integrated with various biochar types under unsaturated soil conditions. The study found that the addition of biochar types─specifically reed straw biochar (RSB), apple wood biochar (AWB), and corn straw biochar (CSB)─significantly influenced the performance of PMFCs. RSB, with its large surface area and porous structure, notably increased the current output by reducing soil resistance and enhancing electron transfer efficiency in microbial reduction reactions, achieving a peak power density of approximately 1608 mW/m2. AWB, despite its less porous structure, leveraged its high cation exchange capacity and hydrophilic functional groups to foster microbial community growth and diversity, thereby also increasing bioelectricity output. Conversely, CSB, with its large surface area, showed the least improvement in PMFC performance due to its layered structure and lower water retention capacity. Additionally, under drought conditions, PMFCs with added RSB and AWB exhibited better drought resistance due to their ability to improve soil moisture characteristics and enhance soil conductivity. The addition of biochar reduced soil resistance, increasing the bioelectric output of PMFCs and maintaining good performance even under low moisture conditions. This study highlights the critical role of biochar's surface area and functional groups in optimizing PMFC performance. It enhances our understanding of PMFC optimization and might offer a novel power generation method for the future, while also presenting a fresh strategy for soil monitoring.

Recent advances in swine wastewater treatment technologies for resource recovery: A comprehensive review

Swine wastewater (SW), characterized by highly complex organic and nutrient substances, poses serious impacts on aquatic environment and public health. Furthermore, SW harbors valuable resources that possess substantial economic potential. As such, SW treatment technologies place increased emphasis on resource recycling, while progressively advancing towards energy saving, sustainability, and circular economy principles. This review comprehensively encapsulates the state-of-the-art knowledge for treating SW, including conventional (i.e., constructed wetlands, air stripping and aerobic system) and resource-utilization-based (i.e., anaerobic digestion, membrane separation, anaerobic ammonium oxidation, microbial fuel cells, and microalgal-based system) technologies. Furthermore, this research also elaborates the key factors influencing the SW treatment performance, such as pH, temperature, dissolved oxygen, hydraulic retention time and organic loading rate. The potentials for reutilizing energy, biomass and digestate produced during the SW treatment processes are also summarized. Moreover, the obstacles associated with full-scale implementation, long-term treatment, energy-efficient design, and nutrient recovery of various resource-utilization-based SW treatment technologies are emphasized. In addition, future research prospective, such as prioritization of process optimization, in-depth exploration of microbial mechanisms, enhancement of energy conversion efficiency, and integration of diverse technologies, are highlighted to expand engineering applications and establish a sustainable SW treatment system.

Response of current distribution in a liter-scale microbial fuel cell to variable operating conditions

Microbial fuel cells (MFCs) are an emerging technology in renewable energy and waste treatment and the scale-up is crucial for practical applications. Undoubtedly, the analysis and comprehension of MFC operation necessitate essential information regarding the response of the current distribution to variable operating conditions, which stands as one of its significant dynamic characteristics. In this study, the dynamic responses of current distribution to external stimuli (external load, temperature, pH, and electrolyte concentration) were investigated by employing a segmented anode current collector in a liter-scale MFC. The results demonstrated that, with respect to the anodic segment close to the cathode, a major response of the segment current to changes in load, temperature and pH was observed while minor response to changes in ion concentration. It was also found that external stimuli-induced high current usually led to a worse current distribution while increasing electrolyte ion concentration could simultaneously improve the maximal power generation and current distribution. In addition, the response time of segment current to input stimulus followed the pattern of temperature ˃ pH ˃ ion concentration ˃ external load. The results and implication of this study would be helpful in enhancing the operational stability of scale-up MFCs in future practical application.

In-situ microbial protein production by using nitrogen extracted from multifunctional bio-electrochemical system

Upgrading of waste nitrogen sources is considered as an important approach to promote sustainable development. In this study, a multifunctional bio-electrochemical system with three chambers was established, innovatively achieving 2.02 g/L in-situ microbial protein (MP) production via hydrogen-oxidizing bacteria (HOB) in the protein chamber (middle chamber), along with over 2.9 L CO2/(L·d) consumption rate. Also, 69% chemical oxygen demand was degraded by electrogenic bacteria in the anode chamber, resulting in the 394.67 J/L electricity generation. Focusing on the NH4+-N migration in the system, the current intensity contributed 4%-9% in the anode and protein chamber, whereas, the negative effect of -6.69% on contribution was shown in the cathode chamber. On the view of kinetics, NH4+-N migration in anode and cathode chambers was fitted well with Levenberg-Marquardt equation (R2 > 0.92), along with the well-matched results of HOB growth in the protein chamber based on Gompertz model (R2 > 0.99). Further evaluating MPs produced by HOB, 0.45 g/L essential amino acids was detected, showing the better amino acid profile than fish and soybean. Multifunctional bio-electrochemical system revealed the economic potential of producing 6.69 €/m3 wastewater according to a simplified economic evaluation.

Recent trends in polycyclic aromatic hydrocarbons pollution distribution and counteracting bio-remediation strategies

Polycyclic aromatic hydrocarbons (PAHs) are distributed worldwide due to long-term anthropogenic pollution sources. PAHs are recalcitrant and highly persistent in the environment due to their inherent properties, such as heterocyclic aromatic ring structures, thermostability, and hydrophobicity. They are highly toxic, carcinogenic, immunotoxic, teratogenic, and mutagenic to various life systems. This review focuses on the unique data of PAH sources, exposure routes, detection techniques, and harmful effects on the environment and human health. This review provides a comprehensive and systematic compilation of eco-friendly biological treatment solutions for PAH remediation, such as microbial remediation approaches utilizing microbial cultures. In situ and Ex situ bioremediation of PAH methods, including composting land farming, biopiles, bioreactors bioaugmentation, and phytoremediation processes, are discussed in detail, as is a summary of the factors affecting and limiting PAH bioremediation. This review provides an overview of emerging technologies that use multi-process combinatorial treatment approaches and answers to generating value-added by-products during PAH remediation.

Microbial Fuel Cell Construction Features and Application for Sustainable Wastewater Treatment

A microbial fuel cell (MFC) is a system that can generate electricity by harnessing microorganisms' metabolic activity. MFCs can be used in wastewater treatment plants since they can convert the organic matter in wastewater into electricity while also removing pollutants. The microorganisms in the anode electrode oxidize the organic matter, breaking down pollutants and generating electrons that flow through an electrical circuit to the cathode compartment. This process also generates clean water as a byproduct, which can be reused or released back into the environment. MFCs offer a more energy-efficient alternative to traditional wastewater treatment plants, as they can generate electricity from the organic matter in wastewater, offsetting the energy needs of the treatment plants. The energy requirements of conventional wastewater treatment plants can add to the overall cost of the treatment process and contribute to greenhouse gas emissions. MFCs in wastewater treatment plants can increase sustainability in wastewater treatment processes by increasing energy efficiency and reducing operational cost and greenhouse gas emissions. However, the build-up to the commercial-scale still needs a lot of study, as MFC research is still in its early stages. This study thoroughly describes the principles underlying MFCs, including their fundamental structure and types, construction materials and membrane, working mechanism, and significant process elements influencing their effectiveness in the workplace. The application of this technology in sustainable wastewater treatment, as well as the challenges involved in its widespread adoption, are discussed in this study.

Influence of Nanomaterials and Other Factors on Biohydrogen Production Rates in Microbial Electrolysis Cells-A Review

Microbial Electrolysis Cells (MECs) are one of the bioreactors that have been used to produce bio-hydrogen by biological methods. The objective of this comprehensive review is to study the effects of MEC configuration (single-chamber and double-chamber), electrode materials (anode and cathode), substrates (sodium acetate, glucose, glycerol, domestic wastewater and industrial wastewater), pH, temperature, applied voltage and nanomaterials at maximum bio-hydrogen production rates (Bio-HPR). The obtained results were summarized based on the use of nanomaterials as electrodes, substrates, pH, temperature, applied voltage, Bio-HPR, columbic efficiency (CE) and cathode bio-hydrogen recovery (C Bio-HR). At the end of this review, future challenges for improving bio-hydrogen production in the MEC are also discussed.

Advances in the utilisation of carbon-neutral technologies for a sustainable tomorrow: A critical review and the path forward

Global industrialisation and overexploitation of fossil fuels significantly impact greenhouse gas emissions, resulting in global warming and other environmental problems. Hence, investigations on capturing, storing, and utilising atmospheric CO2 create novel technologies. Few microorganisms, microalgae, and macroalgae utilise atmospheric CO2 for their growth and reduce atmospheric CO2 levels. Activated carbon and biochar from biomasses also capture CO2. Nanomaterials such as metallic oxides, metal-organic frameworks, and MXenes illustrate outstanding adsorption characteristics, and convert CO2 to carbon-neutral fuels, creating a balance between CO2 production and elimination, thus zeroing the carbon footprint. The need for a paradigm shift from fossil fuels and promising technologies on renewable energies, carbon capture mechanisms, and carbon sequestration techniques that help reduce CO2 emissions for a better tomorrow are reviewed to achieve the world's sustainable development goals. The challenges and possible solutions with future perspectives are also discussed.