Mitigating membrane fouling in a high solid food waste thermophilic anaerobic membrane bioreactor by incorporating fixed bed bio-carriers

Optimizing the algae-bacteria biofilm reactor for imidacloprid wastewater treatment: An evaluation of hydraulic retention times for enhanced efficiency and energy savings

Recent observations have highlighted the rapidly growing prevalence of emerging contaminants such as Imidacloprid (IMI) within our environment. These insecticidal pollutants, coexisting with more traditional contaminants, have become predominant in aquatic systems, posing risks to both human and ecological well-being. Among the various wastewater treatment approaches tested, biofilm reactors are currently gaining prominence. In this study, we employed an Algae-Bacteria Biofilm Reactor (ABBR) to concurrently address both conventional and emergent contaminants, specifically IMI, over an extended timeframe. Following a 60-day assessment, the ABBR consistently demonstrated removal efficiencies exceeding 85% for total dissolved nitrogen, ammonia nitrogen, and total dissolved phosphorus, and also achieved removal efficacy for the soluble chemical oxygen demand (sCOD). Despite the removal efficiency of IMI (with initial concentration is 1.0 mg/L) in ABBR showed a gradual decline over the extended period, it remained consistently effective over 50% due to the microalgae-mediated free radical reactions, indicating the ABBR's sustained efficiency in long-duration operations. Additionally, applying some non-conventional modifications, like aeration removal and reducing light exposure, demonstrated minimal impact on the reactor's pollutant removal efficiencies, achieving comparable results to the control group (which utilized aeration with a 14:10 light/dark ratio), 0.92 kW h/L/d of electricity can be saved economically, which accentuated the potential for energy conservation. An in-depth analysis of the treated effluents from the ABBRs, using ultra-performance liquid chromatography-tandem mass spectrometry (UPLC-MS/MS) technique, uncovered four potential transformation pathways for IMI. Overall, our findings suggest that these optimized processes did not influence the transformation products of IMI, thereby reaffirming the viability of our proposed optimization.

Interplay role of microalgae and bio-carriers in hybrid membrane bioreactors on wastewater treatment, membrane fouling, and microbial communities

Algal membrane bioreactors (algae-MBRs) and advanced hybrid biocarrier algal membrane bioreactors (hybrid algae-MBRs) have been investigated to improve the performance of conventional MBRs (C-MBRs). Maximum chemical oxygen demand and nutrient removal efficiencies, similar to the maximum biomass growth rate, chlorophyll-a concentration, and balanced microbial growth, were achieved in the hybrid algae-MBR inoculated with polyethylene biocarriers and algal cells. During the 90 days of operation, the hybrid algae-MBR demonstrated lower membrane fouling without membrane washing, whereas the C-MBR and algae-MBR were washed seven and four times, respectively. Compared to the C-MBR, both the algal MBR and hybrid algal MBR exhibited higher levels of nitrification, with 6 and 10 % greater rates, respectively. In addition, they displayed significant improvements in ammonium biomass uptake compared to the C-MBR, with increases of 30 and 37 %, respectively. In the algae-MBR, the chlorophyll-a results showed proliferation of algae over time. However, biocarriers that provide an additional surface for microbial growth, particularly algal strains, inhibit algal proliferation and result in balanced microbial growth (based on chlorophyll-a/MLVSS) in the bulk solution of the hybrid algae-MBR. In addition, the oxygen mass balance estimated that photosynthesis provided 45 % of the dissolved oxygen required in the studied algal reactors, whereas mixing provided the remainder. Additionally, microbial sequencing results indicated that the microbial communities (e.g., Candidatus, Cloacibacterium, and Falavobacterium) were altered by introducing microalgae and biocarriers that affected the activity of different microorganisms, changed the sludge and fouling layer properties, and improved the performance of the C-MBRs.

Enhanced digestion of sludge via co-digestion with food waste in a high-solid anaerobic membrane bioreactor: Performance evaluation and microbial response

A 15 L high-solid mesophilic AnMBR was operated for the digestion of food waste, primary sludge and excess sludge. The digestion performance was evaluated from the perspective of methane generation, permeate quality and organic reduction. Furthermore, the change in the microbial community was investigated by 16S rRNA gene analysis. The results showed that the introduction of sludge decreased the H2S levels in biogas compared with the mono-digestion of food waste and the co-digestion with food waste increased biogas and methane production compared with the mono-digestion of sludge. A substitution ratio of 25 % became a turning point of permeate composition and reaction rates. The energy recovery ratios of the mesophilic AnMBR were over 75 % based on stoichiometric analysis. In reaction kinetics analysis, hydrolysis as the first step of anaerobic digestion was found to be most influenced by the composition of the substrate. Finally, the microbial community structures were stable under tested conditions while the evolutionary relationships within the dominant phyla were observed. In the archaea community, Methanosaeta was the dominant methanogen regardless sludge ratio in the substrate.

Optimization of membrane filtration and cleaning strategy in a high solid thermophilic AnMBR treating food waste

Anaerobic membrane bioreactor is advantageous over traditional processes for food waste treatment, i.e. short retention time, high loading rate, and particulate clean permeate. However, establishing a sustainable membrane filtration is a long-standing challenge because of its high viscosity and solids concentration characteristics. Therefore, this study investigated the changes in the membrane permeability before and after the cleaning during a 130-day thermophilic anaerobic experiment. Results show that the AnMBR system could maintain high stability even under a short HRT of 10 days and OLR of 9.0 kg-COD/(m3·d) with low volatile fatty acid of 50 mg/L. The membrane filtration deteriorates with the concurrence of a sharp increase of viscosity when the volatile solids reached 23 g/L. A critical flux was achieved at 5.5 L/(m2·h) under optimized operation conditions, membrane filtration/relaxing ratio with less than 4:1 at a hydraulic retention time of 15 d. Membrane fouling can be removed by soaking the membrane in NaClO (1 g/L, 15 h) and citric acid (2 g/L, 2 h). Conclusively, this work provides insight to establish the operation strategy for a thermophilic AnMBR treating food waste.

Treatment of micro-polluted water with low C/N ratio by immobilized bioreactor using PVA/sintered ores@sponge cube: Performance effects and potential removal pathways

The widespread use of industrial products containing lead (Pb²⁺) and tetracycline (TC) medications led to the combined pollution of nitrate, Pb²⁺, and TC in water. A novel biomaterial containing polyvinyl alcohol (PVA) and sponge cube with sintered ores (PVA/sintered ores@sponge cube) was prepared to ensure the maximum NO₃^--N removal efficiency (96.21 %) of the bioreactor under the hydraulic retention time (HRT) of 7.0 h, pH of 6.0, and the carbon to nitrogen (C/N) of 1.5 that had the ability to remove TC and Pb²⁺ synergistically. Composite pollutants slightly decreased denitrification performance in the combined pollution system on account of the addition of sintered ores. Results of scanning electron microscopy (SEM) showed that the sintered ores in the biocarrier induced denitrification and the adsorption of bio‑iron oxides were involved in the removal of TC and Pb²⁺. The simultaneous removal of composite pollutants during denitrification was facilitated by extracellular polymeric substances (EPS) as revealed by Fourier transform infrared spectroscopy (FTIR) and fluorescence excitation-emission matrix (EEM). In addition, high-throughput sequencing results showed that Zoogloea had the highest proportion in the bioreactor.

In-situ membrane fouling control and performance improvement by adding materials in anaerobic membrane bioreactor: A review

Anaerobic membrane bioreactor (AnMBR) is a promising treatment technique for various types of wastewaters, and is preferred over other conventional aerobic and anaerobic methods. However, membrane fouling is considered a bottleneck in AnMBR system, which technically blocks membrane pores by numerous inorganics, organics, and other microbial substances. Various materials can be added in AnMBR to control membrane fouling and improve anaerobic digestion, and studies reporting the materials addition for this purpose are hereby systematically reviewed. The mechanism of membrane fouling control including compositional changes in extracellular polymeric substances (EPSs) and soluble microbial products (SMPs), materials properties, stimulation of antifouling microbes and alteration in substrate properties by material addition are thoroughly discussed. Nonetheless, this study opens up new research prospects to control membrane fouling of AnMBR, engineered by material, including compositional changes of microbial products (EPS and SMP), replacement of quorum quenching (QQ) by materials, and overall improvement of reactor performance. Regardless of the great research progress achieved previously in membrane fouling control, there is still a long way to go for material-mediated AnMBR applications to be undertaken, particularly for materials coupling, real scale application and molecular based studies on EPSs and SMPs, which were proposed for future researches.

Volatile Fatty Acids (VFA) Production and Recovery from Chicken Manure Using a High-Solid Anaerobic Membrane Bioreactor (AnMBR)

Acidogenic fermentation of chicken manure (CM) for production and recovery of volatile fatty acids (VFA) is an interesting biological waste-to-value approach compared to benchmark organic waste management strategies. Considering the wide range of high value applications of VFA, a semi-continuous immersed anaerobic membrane bioreactor (AnMBR) was applied to boost VFA productivity and yield, while reducing downstream processing stages assisting the recovery of VFA. In this regard, the effect of parameters such as pH and organic loading rates (OLR) on the overall bioconversion and filtration performance was investigated. Thermal-shocked CM was applied both as inoculum and substrate. A very high VFA yield (0.90 g-VFA/g-VS) was obtained in the treatment with no pH control (~8.2) at an OLR of 2 g-VS/(L·d), presenting 24% higher yield compared to that of the controlled pH. Batch assays further demonstrated the enhanced hydrolysis and acidogenesis activities at weak alkaline conditions. A long-term (78 days) fermentation and filtration was successfully performed, where stable membrane filtration performance was experienced for about 50 days under high-solid (suspended solid of 37-45 g/L) and high flux (20 L/(m²·h)) conditions. Results suggest that AnMBR of CM is a feasible and promising process for VFA production and recovery.