Electrochemical-assisted ultraviolet light coupled peroxodisulfate system to degrade ciprofloxacin in water: Kinetics, mechanism and pathways

Antibiotic ciprofloxacin removal from aqueous solutions by electrochemically activated persulfate process: Optimization, degradation pathways, and toxicology assessment

Ciprofloxacin (CIP) is a commonly used antibiotic in the fluoroquinolone group and is widely used in medical and veterinary medicine disciplines to treat bacterial infections. When CIP is discharged into the sewage system, it cannot be removed by a conventional wastewater treatment plant because of its recalcitrant characteristics. In this study, boron-doped diamond anode and persulfate were used to degrade CIP in an aquatic solution by creating an electrochemically activated persulfate (EAP) process. Iron was added to the system as a coactivator and the process was called EAP+Fe. The effects of independent variables, including pH, Fe2+, persulfate concentration, and electrolysis time on the system were optimized using the response surface methodology. The results showed that the EAP+Fe process removed 94% of CIP under the following optimum conditions: A pH of 3, persulfate/Fe2+ concentration of 0.4 mmol/L, initial CIP concentration 30 mg/L, and electrolysis time of 12.64 min. CIP removal efficiency was increased from 65.10% to 94.35% by adding Fe2+ as a transition metal. CIP degradation products, 7 pathways, and 78 intermediates of CIP were studied, and three of those intermediates (m/z 298, 498, and 505) were reported. The toxicological analysis based on toxicity estimation software results indicated that some degradation products of CIP were toxic to targeted animals, including fathead minnow, Daphnia magna, Tetrahymena pyriformis, and rats. The optimum operation costs were similar in EAP and EAP+Fe processes, approximately 0.54 €/m3.

Lab-scale transport and activation of peroxydisulfate for phenanthrene degradation in soil: A comprehensive assessment of the remediation process, soil environment and microbial diversity

Electrokinetic transport followed by electrical resistance heating activation of peroxydisulfate is a novel in situ soil remediation method. However, the strategy of electrokinetic transport coupled with electrical resistance heating and the comprehensive evaluation of restored soil need to be further explored. In this study, a lab-scale simulation device for in situ electrokinetic transport coupled with electrical resistance heating activation of peroxydisulfate was constructed to monitor the transport and transfer of peroxydisulfate, target pollutants, and process parameters, and the physicochemical properties and bacterial community of treated soil were evaluated. The results showed that adding 10 wt% peroxydisulfate to both the anode and cathode resulted in the optimized transfer rate and cumulative concentration of peroxydisulfate under electrokinetics. After 8 h, the cumulative concentration of peroxydisulfate reached 66.15- 166.29 mmol L-1, which was attributed to the migration of a large amount of S2O82- from the cathode to the soil under electromigration. Additionally, the anodic interfacial electric potential was improved, which was more conducive to electroosmotic transport of peroxydisulfate from the anode chamber. By alternating electrokinetic transport and electrical resistance heating activation of peroxydisulfate for two cycles, the phenanthrene degradation efficiency in four evenly distributed wells between electrodes reached 75.4 %, 87.6 %, 92.3 %, and 94.4 %. With slight variations in soil morphology and structure, the electrokinetic transport coupled with electrical resistance heating activation of peroxydisulfate elevated the soil fertility index. The abundance and diversity of bacterial communities in treated soil recovered to above the original soil level after 15 days. Our findings may support the application of electrokinetic transport coupled with electrical resistance heating activation of peroxydisulfate as a promising green ecological technology for the in situ remediation of organic-contaminated soil.

Magnetized algae catalyst by endogenous N to effectively trigger peroxodisulfate activation for ultrafast degraded sulfathiazole: Radical evolution and electron transfer

An innovative Fe-N co-coupled catalyst MN-2 was prepared from waste spirulina by co-pyrolysis as a highly active carbon-based catalyst for the activation of peroxydisulfate (PDS) for the degradation of sulfathiazole (ST). The protein-rich raw material Spirulina provided sufficient N during the pyrolysis process, thus achieving N doping without an additional nitrogen source, optimizing the interlayer structure of the biochar material and effectively inhibiting the leaching of the ligand metal Fe. MN-2 showed highly efficient catalytic activity for peroxydisulfate (PDS), with a degradation efficiency of 100% for ST within 30 min and a kinetic constant (kobs) reached 0.306 min-1, benefiting from the excellent adsorption ability of MN-2 forming MN-2-PDS* complexes and the electron transfer process generated by Fe3+ and Fe2+ cycling, oxygen-containing functional groups. The effects of PDS dosage, initial pH and coexisting anions on the oxidation process were also investigated. Free radical quenching, electron paramagnetic resonance and electrochemical measurements were employed to explain the hydroxyl (·OH) and sulfate (SO4·-) as the dominant active species and the electron transfer effect on the removal of ST. MN-2 maintained a ST removal rate of 84% after four recycling experiments, showing a high reusability performance. This work provides a simple way to prepare magnetized N-doped biochar, a novel catalyst (MN-2) for efficient activation of PDS for ST degradation, and a feasible method for removing sulfanilamide antibiotics in water environment.

Effect of polytetrafluoroethylene nanoplastics on combined inhibition of ciprofloxacin and bivalent copper on nitrogen removal, sludge activity and microbial community in sequencing batch reactor

The work aimed to explore effects of polytetrafluoroethylene nanoplastics on joint inhibitions of ciprofloxacin and bivalent copper on the nitrogen removal in a sequencing batch reactor and its potential mechanisms. The addition of bivalent copper and/or ciprofloxacin reduced the ammonia nitrogen elimination rate with or without polytetrafluoroethylene nanoplastics. Adsorption kinetics and thermodynamics showed the binary bivalent copper and ciprofloxacin promoted their adsorptions by polytetrafluoroethylene nanoplastics. Polytetrafluoroethylene nanoplastics enhanced combined toxicities of ciprofloxacin and bivalent copper to sludge activities and microbial community involved into nitrification and denitrification due to the adsorption of ciprofloxacin and bivalent copper by polytetrafluoroethylene nanoplastics. With or without polytetrafluoroethylene nanoplastics, bivalent copper and/or ciprofloxacin caused more obvious level changes of protein than polysaccharide. This study provides novel insights for understanding the effect of combined heavy metals and antibiotics on the performance in a sequencing batch reactor with the nanoplastics stress.