Green synthesis of titanium dioxide nanoparticles using plant biomass and their applications- A review

Optimizing the green synthesis of antibacterial TiO2 - anatase phase nanoparticles derived from spinach leaf extract

Titanium dioxide nanoparticles, renowned for their abundance, non-toxicity, and stability, have emerged as indispensable components in various fields such as air purification, healthcare, and industrial processes. Their applications as photocatalysts and antibacterial agents are particularly prominent. The synthesis methods significantly influence the properties and subsequent applications of these nanoparticles. While several techniques exist, the biological approach using plant extracts offers advantages such as simplicity, biocompatibility, and cost-effectiveness. This study focused on the green synthesis of titanium dioxide nanoparticles utilizing spinach leaf extract. Within the scope of this investigation, the green synthesis of titanium dioxide nanoparticles through spinach leaf extract were synthesized and optimized, followed by a comprehensive examination of their morphological, structural, and chemical attributes with UV-visible spectroscopy, FTIR spectroscopy, XRD, FESEM, and EDX. The minimum inhibitory concentration (MIC) against E. coli and S. aureus was determined to evaluate their antibacterial potential. Optimal synthesis conditions were identified at 50 °C, using a 1/30 concentration and 20 ml of spinach leaf extract. Spherical anatase nanoparticles, ranging from 10 to 40 nm, were produced under these conditions. The change in the color of the extract, absorption at 247 nm, change and increase of the peak at 800 - 400 wavelengths, and the maximum intensity of X-ray diffraction at the angle of 25.367 with the crystal plane 101 were indications of the synthesis of these nanoparticles. Notably, the synthesized nanoparticles exhibited antibacterial activity with MIC values of 0.5 mg/ml against E. coli and 2 mg/ml against S. aureus. This research presents a novel, eco-friendly approach to synthesizing titanium dioxide nanoparticles with promising antibacterial properties.

Harnessing plant extracts for eco-friendly synthesis of iron nanoparticle (Fe-NPs): Characterization and their potential applications for ameliorating environmental pollutants

Iron-nanoparticles (Fe-NPs) are increasingly been utilized in environmental applications due to their efficacy and strong catalytic activities. The novelty of nanoparticle science had attracted many researchers and especially for their green synthesis, which can effectively reuse biological resources during the polymerization reactions. Thus, the synthesis of Fe-NPs utilizing plant extracts could be considered as the eco-friendly, simple, rapid, energy-efficient, sustainable, and cost-effective. The green synthesis route can be recognized as a practical, valuable, and economically effective alternative for large-scale production. During the production process, some biomolecules present in the extracts undergo metal salts reduction, which can serve as both a capping and reducing mechanism, enhancing the reactivity and stability of green-synthesized Fe-NPs. The diversity of species provided a wide range of potential sources for green synthesis of Fe-NPs. With improved understanding of the specific biomolecules involved in the bioreduction and stabilization processes, it will become easier to identify and utilize new, potential plant materials for Fe-NPs synthesis. Newly synthesized Fe-NPs require different characterization techniques such as transmission electron microscope, ultraviolet-visible spectrophotometry, and X-ray absorption fine structure, etc, for the determination of size, composition, and structure. This review described and assessed the recent advancements in understanding green-synthesized Fe-NPs derived from plant-based material. Detailed information on various plant materials suitable of yielding valuable biomolecules with potential diverse applications in environmental safety. Additionally, this review examined the characterization techniques employed to analyze Fe-NPs, their stability, accumulation, mobility, and fate in the environment. Holistically, the review assessed the applications of Fe-NPs in remediating wastewaters, organic residues, and inorganic contaminants. The toxicity of Fe-NPs was also addressed; emphasizing the need to refine the synthesis of green Fe-NPs to ensure safety and environmental friendliness. Moving forward, the future challenges and opportunities associated with the green synthesis of Fe-NPs would motivate novel research about nanoparticles in new directions.

Assessing anticancer, antidiabetic, and antioxidant capacities in green-synthesized zinc oxide nanoparticles and solvent-based plant extracts

Cancer and diabetes represent significant challenges in the field of biomedicine, with major and global impacts on public health. Acacia nilotica, commonly called 'gum arabic tree,' is recognized for its unique biomedical properties. The current study aimed to investigate the pharmacological potential of A. nilotica-based zinc-oxide nanoparticles (ZnO-NPs) in comparison to the ethanol and methanol-based extracts against cancer, diabetes, and oxidative stress. Green synthesis of ZnO-NPs was performed using barks of Acacia nilotica. Different techniques for the characterization of ZnO-NPs, including UV-Visible spectroscopy, Scanning Electron Microscopy, Fourier Transmission Infrared (FT-IR) spectroscopy, and X-ray Diffraction (XRD), were utilized. The morphological analysis of ZnO-NPs revealed that the fine NPs have mean particle sizes of 15 ± 1.5 nm. For the solvent based-extraction, leaves and barks were utilized and dissolved into ethanol and methanol for further processing. The MTT assay revealed that the optimum concentration of ZnO-NPs to inhibit the proliferation of liver cancer cell line HepG2 was 100 μg/mL where 67.0 % inhibition was observed; and both ethanol- and methanol-based extracts showed optimum inhibition at 100 μg/mL. The DPPH assay further demonstrated that 250 μg/mL of ZnO-NPs and 1000 μg/mL of both ethanol- and methanol-based extracts, as the optimum concentration for antioxidant activity (with 73.1 %, 68.9 % and 68.2 % inhibition respectively). The α-Glucosidase inhibition assay revealed that 250 μg/mL of ZnO-NPs and 10 μg/mL of both ethanol- and methanol-based extracts as the optimum concentration for antidiabetic activity (with 95 %, 93.7 % and 93.4 % inhibition respectively). The study provided interesting insights into the efficacy and reliability of ZnO-NPs for potential pharmacological application. Further research should be focused on examining specific pathways and the safety of ZnO-NPs in comparison to solvent-based extracts.

Nanomaterial in controlling biofilms and virulence of microbial pathogens

The escalating threat of antimicrobial resistance (AMR) poses a grave concern to global public health, exacerbated by the alarming shortage of effective antibiotics in the pipeline. Biofilms, intricate populations of bacteria encased in self-produced matrices, pose a significant challenge to treatment, as they enhance resistance to antibiotics and contribute to the persistence of organisms. Amid these challenges, nanotechnology emerges as a promising domain in the fight against biofilms. Nanomaterials, with their unique properties at the nanoscale, offer innovative antibacterial modalities not present in traditional defensive mechanisms. This comprehensive review focuses on the potential of nanotechnology in combating biofilms, focusing on green-synthesized nanoparticles and their associated anti-biofilm potential. The review encompasses various aspects of nanoparticle-mediated biofilm inhibition, including mechanisms of action. The diverse mechanisms of action of green-synthesized nanoparticles offer valuable insights into their potential applications in addressing AMR and improving treatment outcomes, highlighting novel strategies in the ongoing battle against infectious diseases.

Multifunctional self-assembled adsorption microspheres based on waste bamboo shoot shells for multi-pollutant water purification

In this study, multilayer self-assembled multifunctional bamboo shoot shell biochar microspheres (BSSBM) were prepared, in which bamboo shoot shell biochar was used as the carrier, titanium dioxide as the intermediate medium, and chitosan as the adhesion layer. The adsorption behavior of BSSBM on heavy metals Ag(I) and Pd(II), antibiotics, and dye wastewater was systematically analyzed. BSSBM shows a wide range of adsorption capacity. BSSBM is a promising candidate for the purification of real polluted water, not only for metal ions, but also for Tetracycline (TC) and Methylene Blue (MB). The maximum adsorption amounts of BSSBM on Pd(II), Ag(I), TC and MB were 417.3 mg/g, 222.5 mg/g, 97.2 mg/g and 42.9 mg/g, respectively.The adsorption of BSSBM on Pd(II), MB and TC conformed to the quasi-first kinetic model, and the adsorption on Ag(I) conformed to the quasi-second kinetic model. BSSBM showed remarkable selective adsorption capacity for Ag(I) and Pd(II) in a multi-ion coexistence system. BSSBM not only realized the high value-added utilization of waste, but also had the advantages of low cost, renewable and selective adsorption. BSSBM demonstrated its potential as a new generation of multifunctional adsorbent, contributing to the recovery of rare/precious metals and the treatment of multi-polluted water.

Pure Epigallocatechin-3-gallate-Assisted Green Synthesis of Highly Stable Titanium Dioxide Nanoparticles

Nanoparticles (NPs) are conventionally produced by using physical and chemical methods that are no longer in alignment with current society's demand for a low environmental impact. Accordingly, green synthesis approaches are considered a potential alternative due to the plant extracts that substitute some of the hazardous reagents. The general mechanism is based on the reducing power of natural products that allows the formation of NPs from a precursor solution. In this context, our study proposes a simple, innovative, and reproducible green approach for the synthesis of titanium dioxide (TiO2 NPs) that uses, for the first time, the major component of green tea (Camellia sinensis)-epigallocatechin-3-gallate (EGCG), a non-toxic, dietary, accessible, and bioactive molecule. The influence of EGCG on the formation of TiO2 NPs was analyzed by comparing the physicochemical characteristics of green synthesized NPs with the chemically obtained ones. The synthesis of bare TiO2 NPs was performed by hydrolysis of titanium isopropoxide in distilled water, and green TiO2 NPs were obtained in the same conditions, but in the presence of a 1 mM EGCG aqueous solution. The formation of TiO2 NPs was confirmed by UV-VIS and FTIR spectroscopy. SEM micrographs showed spherical particles with relatively low diameters. Our findings also revealed that green synthesized NPs were more stable in colloids than the chemically synthesized ones. However, the phytocompound negatively influenced the formation of a crystalline structure in the green synthesized TiO2 NPs. Furthermore, the synthesis of EGCG-TiO2 NPs could become a versatile choice for applications extending beyond photocatalysis, including promising prospects in the biomedical field.

Antimicrobial properties of green synthesized novel TiO2 nanoparticles using Iranian propolis extracts

The oral antimicrobial and cytotoxic properties of green synthesized novel titanium dioxide nanoparticles (TiO2 NPs) using Iranian propolis extracts were investigated on oral bacteria and fibroblast cells. In this study, propolis was sampled, and alcoholic extracts were prepared. The TiO2 NPs were biosynthesized using propolis extracts. The synthesized TiO2 NPs were characterized by scanning electron microscope (SEM), X-ray diffraction analysis, energy-dispersive X-ray (EDX), Fourier transform infrared spectroscopy (FTIR), dynamic light scattering, ultraviolet-visible (UV-Vis), transmission electron microscope, Brunauer-Emmett-Teller, and zeta potential. MTT (3-[4,5-dimethylthiazol-2-yl]-2,5 diphenyl tetrazolium bromide), minimal inhibitory concentration, minimum bactericidal concentration, minimum fungicidal concentration, biofilm formation, and degradation tests were studied to clarify the oral antimicrobial properties of green synthesized TiO2  NPs. According to the FTIR analysis, the propolis extract contained flavonoids and phenolic compounds in addition to TiO2 NPs. Additionally, UV-Vis revealed that intense bands had formed NPs. EDX spectra and SEM images revealed that the stabilizing agent was in perfect quasi-spherical shapes around 21 nm. An EDX spectrum was used to verify the presence of titanium and oxygen. There were no significant cytotoxicity effects. The antibacterial results showed that Pro1TiO2 (Khalkhal sample) had better effects than Pro2TiO2 (Gilan sample) and TiO2 NPs. The present study presents a new process for synthesizing TiO2 NPs from propolis extracts with less toxic effects and user-friendly, eco-friendly, and economical materials. Pro1TiO2 NPs may be considered the best candidate for clinical application.

Study of Ethylene-Removing Materials Based on Eco-Friendly Composites with Nano-TiO2

Ethylene is a phytohormone that is responsible of fruit and vegetable ripening. TiO2 has been studied as a possible solution to slowing down unwanted ripening processes, due to its photocatalytic capacity which enables it to remove ethylene. Thus, the objective of this study was to develop nanocomposites based on two types of eco-friendly materials: Mater-Bi® (MB) and poly(lactic acid) (PLA) combined with nano-TiO2 for ethylene removal and to determine their ethylene-removal capacity. First, a physical-chemical characterization of nano-TiO2 of different particle sizes (15, 21, 40 and 100 nm) was done through structural and morphological analysis (DRX, FTIR and TEM). Then, its photocatalytic activity and the ethylene-removal capacity were determined, evaluating the effects of time and the type of light irradiation. With respect to the analysis of TiO2 nanoparticles, the whole samples had an anatase structure. According to the photocatalytic activity, nanoparticles of 21 nm showed the highest activity against ethylene (~73%). The results also showed significant differences in ethylene-removal activity when comparing particle size and type and radiation time. Thus, 21 nm nano-TiO2 was used to produce nanocomposites through the melt-extrusion process to simulate industrial processing conditions. With respect to the nanocomposites' ethylene-removing properties, there were significant differences between TiO2 concentrations, with samples with 5% of active showed the highest activity (~57%). The results obtained are promising and new studies are needed to focus on changes in material format and the evaluation in ethylene-sensitive fruits.

Independent and synergistic bio-reductions of uranium (VI) driven by zerovalent iron in aquifer

Zerovalent iron [Fe(0)] can donate electron for bioprocess, but microbial uranium (VI) [U(VI)] reduction driven by Fe(0) is still poorly understood. In this study, Fe(0) supported U(VI) bio-reduction was steadily achieved in the 160-d continuous-flow biological column. The maximum removal efficiency and capacity of U(VI) were 100% and 46.4 ± 0.52 g/(m³·d) respectively, and the longevity of Fe(0) increased by 3.09 times. U(VI) was reduced to solid UO₂, while Fe(0) was finally oxidized to Fe(III). Autotrophic Thiobacillus achieved U(VI) reduction coupled to Fe(0) oxidation, verified by pure culture. H₂ produced from Fe(0) corrosion was consumed by autotrophic Clostridium for U(VI) reduction. The detected residual organic intermediates were biosynthesized with energy released from Fe(0) oxidation and utilized by heterotrophic Desulfomicrobium, Bacillus and Pseudomonas to reduce U(VI). Metagenomic analysis found the upregulated genes for U(VI) reduction (e.g., dsrA and dsrB) and Fe(II) oxidation (e.g., CYC1 and mtrA). These functional genes were also transcriptionally expressed. Cytochrome c and glutathione responsible for electron transfer also contributed to U(VI) reduction. This study reveals the independent and synergistic pathways for Fe(0)-dependent U(VI) bio-reduction, providing promising remediation strategy for U(VI)-polluted aquifers.

Electrostatic deposition of TiO2 nanoparticles on porous wood veneer for improved membrane filtration performance and antifouling properties

Wood has been a promising water purifier material on account of its abundant natural transport channels, easy processing, and renewability, which is mainly focused on its utilization in growth direction for effective separation.Wood veneer manufacured from raw wood block has a reversed-tree pore structure, and possesses advantages of low cost, easy fabrication, material saving, and abundant sources. To realize its functionalization and practicable application for membrane separation, modification of wood veneer is prerequisite. Herein, thin wood veneer with disparate utilization direction of wood was developed to design filter membrane loading TiO₂ nanoparticles for treatment of dye wastewater. Wood veneer with reversed-tree transport pathways exhibits unique porous structure, and filtering direction and wood growth direction is almost orthogonal generated numerous sinuous channels. Thereout, sufficient area for loading TiO₂ nanoparticles and contacting pollutants as well as appropriate water transport pathways at significantly shrinking thickness of wood (the thickness of 0.2 mm) can be provide by these sinuous channels. TiO₂ nanoparticles was first modified by (3-Aminopropyl)triethoxysilane with high positive charge, and immobilized on negatively charged wood surface through atmospheric impregnation via strong electrostatic attractive interaction. Vast quantities of exposed TiO₂ nanoparticles on wood cell lumens significantly enhance the adsorption ability for dye contaminants, resulting in a high membrane separation performance. The flux of TiO₂/wood veneer membrane can achieve high level of 636.94 L/(m²h) with considerable methylene blue removal of 99.9% at 0.01 MPa. Meanwhile, it shows good cycling stability as well as decent flexibility and excellent mechanical strength. Moreover, the designed membrane with photocatalytic function of TiO₂ also displays impressive decontaminated and recycling ability. The flux can recover its pre-recession level after 10 h light irradiation. The designed TiO₂/wood veneer with simple preparation process and excellent water treatment capacity exhibits promising results for practical wastewater treatment.

Removing methylene blue from water: A study of sorption effectiveness onto nanoparticles-doped activated carbon

In this present study, silver (Ag) and titanium dioxide (TiO₂) nanoparticles were successfully deposited on coconut shell-derived activated carbon (CSAC), to synthesize a novel nanocomposite (CSAC@AgNPs@TiO₂NPs) for the adsorption of Methylene Blue (MB) dye from aqueous solution. The fabricated CSAC@AgNPs@TiO₂NPs nanocomposite was analyzed by Scanning Electron Microscope (SEM), X-ray Diffraction (XRD), Fourier-Transform Infrared Spectroscopy (FTIR), Transmission Electron Microscope (TEM) equipped with Energy Dispersive X-ray spectroscopy (EDS) detector, X-ray Photoelectron Spectroscope (XPS), and Brunauer-Emmett-Teller (BET). The successful deposition of AgNPs and TiO₂NPs on CSAC surface was revealed by the TEM/EDX, SEM, and XPS analysis. The mesopore structure of CSAC@AgNPs@TiO₂NPs has a BET surface area of 301 m²/g. The batch adsorption studies were conducted and the influence of different parameters, i.e., adsorbent dose, adsorption time, initial dye concentration, pH and temperature were investigated. The nonlinear isotherm and kinetic modelling demonstrated that adsorption data were best fitted by Sips isotherm and pseudo-second-order models, respectively. The maximum adsorption capacity of MB onto CSAC@AgNPs@TiO₂NPs by the Sips model was 184 mg/g. Thermodynamic results revealed that the adsorption was endothermic, spontaneous and physical in nature. CSAC@AgNPs@TiO₂NPs revealed that MB absorption by CSAC@AgNPs@TiO₂NPs was spontaneous and endothermic. The uptake capacity of MB was influenced significantly by the presence of competing ions including, NO₃^-, HCO_3, Ca²⁺, and Na⁺. Repeated tests indicated that the CSAC@AgNPs@TiO₂NPs can be regenerated and reused six times before being discarded. The primary separation mechanism between MB dye and CSAC@AgNPs@TiO₂NPs was the electrostatic interaction. Thus, CSAC@AgNPs@TiO₂NPs was an outstanding material, which displayed good applicability in real water with ≥ 97% removal of MB dye.

Detection of Methicillin-Resistant Staphylococcus aureus in Clinical and Subclinical Mastitis in Ruminants and Studying the Effect of Novel Green Synthetized Nanoparticles as One of the Alternative Treatments

Mastitis is an important disease in dairy animals worldwide. Methicillin-resistant Staphylococcus aureus (MRSA) is one of the most common causes of clinical and subclinical intramammary infections. In the current study, we isolated bacteria from 150 mastitic milk samples. Multiplex PCR was used to detect the methicillin resistance genes in S. aureus to detect the occurrence of MRSA isolates. Green synthesized titanium dioxide nanoparticles (TiO2 NPs) using aqueous leaf extracts of Artemisia herb Alba (A. herb Alba TiO2 NPs). The antibacterial efficacy of these nanoparticles was evaluated (in vitro and in vivo) against collected MRSA isolates using the disc diffusion method and SPF rats. Out of 150 mastitic milk samples, the frequency of S. aureus was 38 (25.3%), that of E. coli was 45 (30%), that of Klebsiella spp. Was 7 (4.7%), and that of Streptococcus spp. Was 11 (7.3%). Among 38 positive isolates of S. aureus, MRSA was 16 (42.1%) by antimicrobial sensitivity testing (AST) and 14 (38.8%) by multiplex PCR. The MRSA isolates were shown to have 100% resistance to penicillin and methicillin, 87.5% resistance to gentamicin, 50% resistance to cefoxitin and amoxicillin, and 75% resistance to ampicillin and ampicillin/sublactam with low resistance against erythromycin, ciprofloxacin, tetracycline, and levofloxacin by AST, respectively. A. herb Alba TiO2 NP formation was observed by changing the colour from white to dark green. The UV spectrum revealed absorbance peaks at 240-250 nm, and their sizes ranged from 42-66 nm and 11 to 45 nm by scanning electron microscopy (SEM) and transmission electron microscopy (TEM). ‏A. herb Alba TiO2 NP suspensions were evaluated against MRSA, with the highest zone of inhibition (43 ± 0.45 mm) at a concentration of 40 μg/ml. Hematological parameters and histological examination after oral administration of 20 mg/kg of A. herb Alba TiO2 NPs indicated that A. herb Alba TiO2 NPs can be used as a new antimicrobial against resistant bacteria (MRSA) with consideration of the dose and methods of synthesis of plant-based compounds.

Biosynthesis of TiO2 nanoparticles by Caricaceae (Papaya) shell extracts for antifungal application

Titanium dioxide nanoparticles (TiO₂ NPs) were prepared by Caricaceae (Papaya) Shell extracts. The Nanoparticles were analyzed by UV–Vis spectrums, X-ray diffractions, and energy-dispersive X-rays spectroscopy analyses with a scanning electron microscope. An antifungal study was carried out for TiO₂ NP in contradiction of S. sclerotiorums, R. necatrixs and Fusarium classes that verified a sophisticated inhibitions ratio for S. sclerotiorums (60.5%). Germs of pea were individually preserved with numerous concentrations of TiO₂ NPs. An experience of TiO₂ NPs (20%, 40%, 80% and 100%), as well as mechanisms that instigated momentous alterations in seed germinations, roots interval, shoot lengths, and antioxidant enzymes, were investigated. Associated with controls, the supreme seeds germinations, roots and plant growth were perceived with the treatments of TiO₂ NPs. Super-oxide dis-mutase and catalase activities increased because of TiO₂ NPs treatments. This advocates that TiO₂ Nanoparticles may considerably change antioxidant metabolisms in seed germinations.

TiO2-modified g-C3N4 nanocomposite for photocatalytic degradation of organic dyes in aqueous solution

In the current study, a direct S-scheme titanium dioxide/graphitic carbon nitride (TiO₂/g-C₃N₄) heterojunction structure was fabricated via simultaneous calcination of TiO₂ precursors and g-C₃N₄. Guava leaf extract was utilized as a reductant for TiO₂ production through a green synthetic method, and g-C₃N₄ was prepared by thermal decomposition of melamine. The pristine and nanocomposite photocatalysts were characterized by XRD, FTIR, BET, TGA, HRTEM, UV-vis DRS, and PL to elucidate their physicochemical properties. The photocatalytic activity of synthesized photocatalysts was examined through the degradation of rhodamine B (RhB) and methylene blue (MB) dyes under simulated solar light irradiation. The nanocomposite exhibited commendable photocatalytic performances with 96% degradation efficiency of RhB attained in 120 min and 95% degradation efficiency of MB achieved in 150 min. The enhanced photocatalytic activities were attributable to visible light-harvesting characteristics and the formation of an S-scheme heterojunction system between two catalysts which promotes interfacial charge separation efficiency and longer charge carrier lifespan. After 4 consecutive cycles, the degradation efficiencies of both RhB and MB remained above 85%. According to the trapping experiments, OH^• and O₂ ^•- radicals were critical in the degradation of RhB, while h⁺ and O₂ ^•- radicals were dominant in the degradation of MB. The nanocomposite was also tested for elution of actual water pollutants by combining two dyes, and above 90% degradation efficiencies were achieved for both dyes after 240 min.

Physico-chemical characteristics and cytotoxicity evaluation of CuO and TiO2 nanoparticles biosynthesized using extracts of Mucuna pruriens utilis seeds

The green synthesis approach to nanoparticles has been widely received as an alternative to the conventional methods, specifically for applications in areas such as biology, agriculture and medicine, where toxicity is of great concern. In this study, copper oxide (CuO) and titanium oxide (TiO₂) nanoparticles (NPs) were synthesized using an aqueous extract of Mucuna pruriens utilis seed. The morphology and structural characterization of the NPs were achieved by using scanning and transmission electron microscopy (SEM and TEM), and X-ray diffraction (XRD) measurement, while the elemental composition was studied using electron diffraction X-ray spectroscopy (EDS). A monoclinic phase of CuO and anatase phases of TiO₂ with high crystallinity were confirmed from the diffraction patterns of the XRD. Both TEM and SEM micrographs of the CuO confirmed short rod-shaped nanostructure, while spherical morphologies were obtained for the TiO₂ NPs. The EDS study indicated that the composition of the samples conformed with the identified products in the XRD and attest to the purity of the NPs. The nanoparticles exhibited a dose-dependent profile in MTT cytotoxicity assay with some cell specificity. However, the anticancer potential of these NPs was still lower than that of the standard anticancer drug, 5-fluorouracil.