Ion exchange to immobilize Cd(II) at neutral pH into silicate matrix prepared by co-grinding kaolinite with calcium compounds

Enhanced Cd2+ removal from aqueous solution using olivine and magnesite combination: New insights into the mechanochemical synergistic effect

In this study, an efficient stabilizer material for cadmium (Cd2+) treatment was successfully prepared by simply co-milling olivine with magnesite. Several analytical methods including XRD, TEM, SEM and FTIR, combined with theoretical calculations (DFT), were used to investigate mechanochemical interfacial reaction between two minerals, and the reaction mechanism of Cd removal, with ion exchange between Cd2+ and Mg2+ as the main pathway. A fixation capacity of Cd2+ as high as 270.61 mg/g, much higher than that of the pristine minerals and even the individual/physical mixture of milled olivine and magnesite, has been obtained at optimized conditions, with a neutral pH value of the solution after treatment to allow its direct discharge. The as-proposed Mg-based stabilizer with various advantages such as cost benefits, green feature etc., will boosts the utilization efficiency of natural minerals over the elaborately prepared adsorbents.

Resourcization of Argillaceous Limestone with Mn3O4 Modification for Efficient Adsorption of Lead, Copper, and Nickel

Argillaceous limestone (AL) is comprised of carbonate minerals and clay minerals and is widely distributed throughout the Earth's crust. However, owing to its low surface area and poorly active sites, AL has been largely neglected. Herein, manganic manganous oxide (Mn3O4) was used to modify AL by an in-situ deposition strategy through manganese chloride and alkali stepwise treatment to improve the surface area of AL and enable its utilization as an efficient adsorbent for heavy metals removal. The surface area and cation exchange capacity (CEC) were enhanced from 3.49 to 24.5 m2/g and 5.87 to 31.5 cmoL(+)/kg with modification, respectively. The maximum adsorption capacities of lead (Pb2+), copper (Cu2+), and nickel (Ni2+) ions on Mn3O4-modified argillaceous limestone (Mn3O4-AL) in mono-metal systems were 148.73, 41.30, and 60.87 mg/g, respectively. In addition, the adsorption selectivity in multi-metal systems was Pb2+ > Cu2+ > Ni2+ in order. The adsorption process conforms to the pseudo-second-order model. In the multi-metal system, the adsorption reaches equilibrium at about 360 min. The adsorption mechanisms may involve ion exchange, precipitation, electrostatic interaction, and complexation by hydroxyl groups. These results demonstrate that Mn3O4 modification realized argillaceous limestone resourcization as an ideal adsorbent. Mn3O4-modified argillaceous limestone was promising for heavy metal-polluted water and soil treatment.

Separable calcium sulphate modified biochar gel beads for efficient cadmium removal from wastewater

This study outlines the synthesis of a novel, cost-effective composite material comprising calcium sulphate-modified biochar (Ca-BC) cross-linked with polyethyleneimine (PEI) and sodium alginate (SA), which was subsequently transformed into gel beads (Ca-BC@PEI-SA). These beads were engineered to enable effective cadmium ion (Cd(II)) adsorption from wastewater. Batch adsorption experiments were conducted to evaluate the effects of pH, contact time, temperature, and coexisting ions on adsorption performance. The isotherms and kinetics in the adsorption process were investigated. The results indicated that the removal of Cd(II) by Ca-BC@PEI-SA adheres more closely to the Langmuir model, with maximum adsorption capacities of 138.44 mg/g (15 °C), 151.98 mg/g (25 °C), and 165.56 mg/g (35 °C) at different temperatures. The pseudo-secondary model fit well with Cd(II) adsorption kinetics, suggesting that the removal process was a monolayer process controlled by chemisorption. Moreover, the mechanical strength of the Ca-BC@PEI-SA gel beads allowed easy recovery and reduced secondary contamination. In addition, the adsorption capacity remained nearly constant after four cycles. The main Cd(II) adsorption mechanisms involved surface complexation, ion exchange, and cation-π-bonding interactions.

Recent progresses, challenges, and opportunities of carbon-based materials applied in heavy metal polluted soil remediation

The application of carbon-based materials (CBMs) for heavy metal polluted soil remediation has gained growing interest due to their versatile properties and excellent remediation performance. Although the progresses on applications of CBMs in removing heavy metal from aqueous solution and their corresponding mechanisms were well known, comprehensive review on applications of CBMs in heavy metal polluted soil remediation were less identified. Therefore, this review provided insights into advanced progresses on utilization of typical CBMs including biochar, activated carbon, graphene, graphene oxide, carbon nanotubes, and carbon black for heavy metal polluted soil remediation. The mechanisms of CBM remediation of heavy metals in soil were summarized, mainly including physical adsorption, precipitation, complexation, electrostatic interaction, and cationic-π coordination. The key factors affecting the remediation effect include soil pH, organic matter, minerals, microorganisms, coexisting ions, moisture, and material size. Disadvantages of CBMs were also included, such as: potential health risks, high cost, and difficulty in achieving co-passivation of anions and cations. This work will contribute to our understanding of current research advances, challenges, and opportunities for CBMs remediation of heavy metal-contaminated soils.