Catalytic pyrolysis of lotus leaves for producing nitrogen self-doping layered graphitic biochar: Performance and mechanism for peroxydisulfate activation

In situ N-doping engineered biochar catalysts for oxidation degradation of sulfadiazine via nonradical pathways: Singlet oxygen and electron transfer

Understanding the structure of non-metallic heteroatom-doped carbon catalysts and the subsequent degradation of new pollutants is crucial for designing more efficient carbon catalysts. Environmentally friendly in situ N-doped biochar catalysts were prepared for peroxymonosulfate (PMS) activation and sulfadiazine (SDZ) degradation. The acid washing process and calcination temperature of catalyst increased π-π* shake up, graphitic N percentage, specific surface area and defects, promoting the transformation of pollutant degradation mechanism from radical pathway to non-radical pathway. 100 % of the SDZ with the initial concentration of 10 mg/L was quickly degraded within 60 min using 0.2 g/L catalysts and 0.5 mM PMS. Excellent catalytic performance was attributed to singlet oxygen and electron transfer-dominated non-radical pathways. The four potential degradation pathways of SDZ were proposed, and toxicity predication indicated that overall biotoxicity of the intermediates during SDZ degradation was decreased. This research deepens our understanding of the mechanisms of non-radical pathways and guides the synthesis of carbon-based catalysts.

Biomass-Derived Carbonaceous Materials with Graphene/Graphene-Like Structures: Definition, Classification, and Environmental Applications

Biomass-derived carbonaceous materials with graphene/graphene-like structures (BGS) have attracted tremendous attention in the field of environmental remediation. The introduction of graphene/graphene-like structures into raw biochars can effectively improve their properties, such as electrical conductivity, surface functional groups, and catalytic activity. In 2021, the International Organization for Standardization defined graphene as a "single layer of carbon atoms with each atom bound to three neighbours in a honeycomb structure". Considering this definition, several studies have incorrectly referred to BGS (e.g., biomass-derived few-layer graphene or porous graphene-like nanosheets) as "graphene". The definitions and classifications of BGS and their applications in environmental remediation have not been assessed critically thus far. Comprehensive analysis and sufficient and robust evidence are highly desired to accurately determine the specific structures of BGS. In this perspective, we provide a systematic framework to define and classify the BGS. The state-of-the-art methods currently used to determine the structural properties of BGS are scrutinized. We then discuss the design and fabrication of BGS and how their distinctive features could improve the applicability of biomass-derived carbonaceous materials, particularly in environmental remediation. The environmental applications of these BGS are highlighted, and future research opportunities and needs are identified. The fundamental insights in this perspective provide critical guidance for the further development of BGS for a wide range of environmental applications.

Magnetized algae catalyst by endogenous N to effectively trigger peroxodisulfate activation for ultrafast degraded sulfathiazole: Radical evolution and electron transfer

An innovative Fe-N co-coupled catalyst MN-2 was prepared from waste spirulina by co-pyrolysis as a highly active carbon-based catalyst for the activation of peroxydisulfate (PDS) for the degradation of sulfathiazole (ST). The protein-rich raw material Spirulina provided sufficient N during the pyrolysis process, thus achieving N doping without an additional nitrogen source, optimizing the interlayer structure of the biochar material and effectively inhibiting the leaching of the ligand metal Fe. MN-2 showed highly efficient catalytic activity for peroxydisulfate (PDS), with a degradation efficiency of 100% for ST within 30 min and a kinetic constant (kobs) reached 0.306 min-1, benefiting from the excellent adsorption ability of MN-2 forming MN-2-PDS* complexes and the electron transfer process generated by Fe3+ and Fe2+ cycling, oxygen-containing functional groups. The effects of PDS dosage, initial pH and coexisting anions on the oxidation process were also investigated. Free radical quenching, electron paramagnetic resonance and electrochemical measurements were employed to explain the hydroxyl (·OH) and sulfate (SO4·-) as the dominant active species and the electron transfer effect on the removal of ST. MN-2 maintained a ST removal rate of 84% after four recycling experiments, showing a high reusability performance. This work provides a simple way to prepare magnetized N-doped biochar, a novel catalyst (MN-2) for efficient activation of PDS for ST degradation, and a feasible method for removing sulfanilamide antibiotics in water environment.

Efficiently catalytic degradation of tetracycline via persulfate activation with plant-based biochars: Insight into endogenous mineral self-template effect and pyrolysis catalysis

Endogenous mineral of plant such as potassium, calcium and iron may play a crucial role in boosting the physicochemical structure and catalytic activity of high temperature pyrolyzed plant-based biochar while it is often neglected owing to its relative less content. Herein, self-template pyrolyzed plant-based biochars were prepared from two different ash-contained agricultural wastes of peanut hull (PH, 3.2% ash) and cotton straw (CS, 0.8% ash), and aimed at investigating the relationship among the endogenous mineral fractions of plant-based biomass, physicochemical active structure and persulfate (PS) catalytic degradation activity for tetracycline (TC). The results of energy/spectral characterization showed that under the self-template effect and pyrolysis catalysis of endogenous minerals, PH biochar (PBC) possessed much more specific surface area, conjugated graphite domain, C=O and pyrrolic-N surface active functional sites than CS biochar (CBC), enhancing TC removal rate of PBC/PS to 88.37%, twice that of CBC/PS (44.16%). Meanwhile, reactive oxygen quenching and electrochemical experiments showed that electrons transfer and non-free radical pathways based on singlet oxygen contributed 92% of TC removal in PBC/PS system. Remarkably, by comparing the differences in structure and TC removal performance of pre-deashing and non-deashing prepared plant-based biochars, a possible mechanism for endogenous mineral components' self-template effect and pyrolysis catalysis role of plant-based biomass was proposed. This study provides a new insight for revealing the intrinsic mechanism of mineral elements enhancing the active surface structures and catalytic properties of plant-based biochars derived from distinct feedstocks.

Bacteria-based biochar as a persulfate activator to degrade organic pollutants

Carbon-based catalysts for activating persulfate to drive advanced oxidation processes (AOPs) are widely used in wastewater treatment. In this study, Shewanella oneidensis MR-1, a typical ferric reducing electroactive microorganism, was utilized as the raw material of biochar (BC) to prepare a novel green catalyst (MBC). The effect of MBC on activating persulfate (PS) to degrade rhodamine B (RhB) was evaluated. Experimental results showed that MBC could effectively activate PS to degrade RhB to reach 91.70% within 270 min, which was 47.4% higher than that of pure strain MR-1. The increasing dosage of PS and MBC could improve the removal of RhB. Meanwhile, MBC/PS can well perform in a wide pH range, and MBC showed good stability, achieving 72.07% removal of RhB with MBC/PS after 5 cycles. Furthermore, the free radical quenching test and EPR experiments confirmed the presence of both free radical and non-free radical mechanisms in the MBC/PS system, with •OH, SO4•- and 1O2 contributing to the effective degradation of RhB. This study successfully provided a new application for bacteria to be used in the biochar field.

Study on persulfate activated by Ce-modified tea waste biochar to degrade tetracycline

In this study, the Ce-modified tea residue biochar (Ce-TBC) was successfully generated and applied to the biochar/persulfate system (Ce-TBC/PDS), the mechanism of the removal of tetracycline (TC) using Ce-TBC/PDS was elaborated. Under the optimal experimental conditions (Ce-TBC = 0.8 g L^-1, PDS = 4 mM, TC = 10 mg L^-1), the removal efficiency of TC was 91.28%, and after 5 cycles, the elimination rate of Ce-TBC/PDS still reached up to 80%. The mechanism of TC removal by Ce-TBC/PDS was analyzed by scanning electron microscopy (SEM), X-ray diffractometer (XRD), Fourier infrared transform spectrometer (FT-IR), and X-ray photoelectron spectrometer (XPS) characterization, and influence factor experiments. The results showed that the introduction of CeO_x increased the oxygen vacancies on the TBC surface and promoted the interconversion between Ce³⁺ and Ce⁴⁺ for better activation of PDS and generation of active species. Free radical quenching experiments and paramagnetic resonance spectrometry (EPR) analysis showed that the non-radical pathway ¹O₂ played a dominant role in the Ce-TBC/PDS system. The present work provided an efficient means of PDS activator and recycling of tea waste.

Mechanisms of biochar enhanced Cu2O photocatalysts in the visible-light photodegradation of sulfamethoxazole

Cu₂O nanoparticles are decorated with biochars derived from spent coffee grounds (denoted as Cu₂O/SCG) and applied as visible-light-active photocatalysts in the sulfamethoxazole (SMX) degradation. The physicochemical properties of Cu₂O/SCG are identified by various spectral analysis, electrochemical and photochemical techniques. As a result, the Cu₂O/SCG exhibits the higher removal efficiency of SMX than the pristine Cu₂O under visible light irradiation. We can observe that Cu₂O could be incorporated onto the SCG biochars with rich oxygen vacancies/adsorbed hydroxyl groups. In addition, the Cu₂O/SCG has the lower charge transfer resistance, faster interfacial electron transfer kinetics, decreased recombination of charge carriers and superior absorbance of visible light. The construction of band diagrams for Cu₂O/SCG and pristine Cu₂O via UV-vis spectra and Mott-Schottky plots suggest that the band energy shifts and higher carrier density of Cu₂O/SCG may be responsible for the photocatalytic activity enhancements. From the radical scavenger experiments and electron paramagnetic resonance spectra, the aforementioned energy shifts could decrease the energy requirement of transferring photoinduced electrons to the potential for the formation of active superoxide radicals (·O₂^-) via one and two-electron reduction routes in the photocatalytic reaction. A proposed degradation pathway shows that ·O₂^- and h⁺ are two main active species which can efficiently degrade SMX into reaction intermediates by oxidation, hydroxylation, and ring opening. This research demonstrates the alternative replacement of conventional carbon materials for the preparation of biochar-assisted Cu₂O photocatalysts which are applied in the environmental decontamination by using solar energy.