Visible light driven antibiotics degradation using S-scheme Bi2WO6/CoIn2S4 heterojunction: Mechanism, degradation pathways and toxicity assessment

Visible-Light Photocatalytic Degradation Efficiency of Tetracycline and Rhodamine B Using a Double Z-Scheme Heterojunction Catalyst of UiO-66-NH2/BiOCl/Bi2S3

BiOCl is a promising photocatalyst, but due to its weak visible light absorption capacity and low photogenerated electron-hole pair separation rate, its practical application is limited to a certain extent. In this study, a novel double Z-scheme heterojunction UiO-66-NH2/BiOCl/Bi2S3 catalyst was constructed to broaden the visible light response range and promote high photogenerated hole-electron separation of BiOCl. Its photocatalytic performance is evaluated by dissociating tetracycline (TC) and rhodamine B (RhB) in visible light. The optimal proportion of UiO-66-NH2/BiOCl/Bi2S3 hybrids exhibits the best degradation efficiency of visible light illumination (∼93% in 120 min for TC and ∼98% in 60 min for RhB). The synergistic effect of a large visible light response range and the Z-scheme charge transfer mechanism ensure the excellent visible photocatalytic activity of UiO-66-NH2/BiOCl/Bi2S3. It is proven that h+ and •O2- are the main active substances in the photocatalysis process by active substance capture experiments and electron spin resonance tests. The intermediates and degradation processes are analyzed by high-performance liquid chromatography-mass spectrometry. This study proves that the new UiO-66-NH2/BiOCl/Bi2S3 photocatalyst has great application potential in the field of water pollution degradation and will provide a new idea for the optimization of BiOCl.

Biomass-Derived Carbon Quantum Dots Chemical Bonding with Sn-Doped Bi2O2CO3 Endowed Fast Carriers' Dynamics and Stabilized Oxygen Vacancies for Efficient Decontamination of Combined Pollutants

Surface defects on photocatalysts could promote carrier separation and generate unsaturated sites for chemisorption and reactant activation. Nevertheless, the inactivation of oxygen vacancies (OVs) would deteriorate catalytic activity and limit the durability of defective materials. Herein, bagasse-derived carbon quantum dots (CQDs) are loaded on the Sn-doped Bi2O2CO3 (BOC) via hydrothermal procedure to create Bi─O─C chemical bonding at the interface, which not only provides efficient atomic-level interfacial electron channels for accelerating carriers transfer, but also enhances durability. The optimized Sn-BOC/CQDs-2 achieves the highest photocatalytic removal efficiencies for levofloxacin (LEV) (88.7%) and Cr (VI) (99.3%). The elimination efficiency for LEV and Cr (VI) from the Sn-BOC/CQDs-2 is maintained at 55.1% and 77.0% while the Sn-BOC is completely deactivated after four cycle tests. Furthermore, the key role of CQDs in stabilization of OVs is to replace OVs as the active center of H2O and O2 adsorption and activation, thereby preventing reactant molecules from occupying OVs. Based on theoretical calculations of the Fukui index and intermediates identification, three possible degradation pathways of LEV are inferred. This work provides new insight into improving the stability of defective photocatalysts.

Photocatalytic boron nitride-based nanomaterials for the removal of selected organic and inorganic contaminants in aqueous solution: A review

Boron nitride (BN) coupled with various conventional and advanced photocatalysts has been demonstrated to exhibit extraordinary activity for photocatalytic degradation because of its unique properties, including a high surface area, constant wide-bandgap semiconducting property, high thermal-oxidation resistance, good hydrogen-adsorption performance, and high chemical/mechanical stability. However, only limited reviews have discussed the application of BN or BN-based nanomaterials as innovative photocatalysts, and it does not cover the recent results and the developments on the application of BN-based nanomaterials for water purification. Herein, we present a complete review of the present findings on the photocatalytic degradation of different contaminants by various BN-based nanomaterials. This review includes the following: (i) the degradation behavior of different BN-based photocatalysts for various contaminants, such as selected dye compounds, pharmaceuticals, personal care products, pesticides, and inorganics; (ii) the stability/reusability of BN-based photocatalysts; and (iii) brief discussion for research areas/future studies on BN-based photocatalysts.

Recent Progress in Photocatalytic Degradation of Water Pollution by Bismuth Tungstate

Photocatalysis has emerged as a highly promising, green, and efficient technology for degrading pollutants in wastewater. Among the various photocatalysts, Bismuth tungstate (Bi2WO6) has gained significant attention in the research community due to its potential in environmental remediation and photocatalytic energy conversion. However, the limited light absorption ability and rapid recombination of photogenerated carriers hinder the further improvement of Bi2WO6's photocatalytic performance. This review aims to present recent advancements in the development of Bi2WO6-based photocatalysts. It delves into the photocatalytic mechanism of Bi2WO6 and summarizes the achieved photocatalytic characteristics by controlling its morphology, employing metal and non-metal doping, constructing semiconductor heterojunctions, and implementing defective engineering. Additionally, this review explores the practical applications of these modified Bi2WO6 photocatalysts in wastewater purification. Furthermore, this review addresses existing challenges and suggests prospects for the development of efficient Bi2WO6 photocatalysts. It is hoped that this comprehensive review will serve as a valuable reference and guide for researchers seeking to advance the field of Bi2WO6 photocatalysis.

S-scheme heterojunction of hollow corncob-like ZnIn2S4/LaFeO3 for water splitting and tetracycline degradation

Reasonable design of heterojunction photocatalysts with high-quality interfacial coupling is an effective way to improve the photocatalytic activity of semiconductors. Herein, we successfully decorated Zinc indium sulfide (ZnIn2S4, ZIS) on perovskite Lanthanum ferrite (LaFeO3, LFO) with more active sites by a pre-hydrothermal combined post-calcination method, and constructed S-scheme heterojunction photocatalyst with a unique hollow corncob-like morphology for efficient photocatalytic hydrogen production and tetracycline (TC) degradation. When the mass ratio of LFO is 35% and 15%, the ZIS/LFO photocatalyst exhibits the best hydrogen evolution rate and TC photodegradation performance, respectively. Notably, the optimum hydrogen production rate is 6 times that of pure ZIS with excellent cycling stability. The enhanced photoactivity can be explained by the hollow corncob-like morphology and the formed S-scheme heterojunction with close interface contact between ZIS and LFO, which significantly improves the spatial separation and migration efficiency of photoexcited carriers, while maintaining a high redox potential. Finally, it provides an effective support for the photocatalytic mechanism through calculation results of density functional theory. This work not only provides a novel construction strategy of photocatalysts for efficient photocatalytic hydrogen evolution and organic pollutant degradation, but also opens up a new insight for perovskite-modified S-scheme heterojunction.

A novel SnIn4S8/ZnFe2O4 S-scheme heterojunction with excellent magnetic properties and photocatalytic degradation activity for tetracycline

The development of efficient and economical photocatalysts is considered a promising strategy for pollution remediation. Magnetically separable SnIn4S8/ZnFe2O4 composites (SIS/ZFO) were prepared by combining SIS with ZFO. The composite with a 30% ZFO mass ratio (SIS/ZFO-30) was the most effective and achieved 60% removal of tetracycline (TC) in 120 min. It has a rate constant of 7.94 × 10-3 min-1, which is 6.3 and 27.2 times higher than those of pure SIS and pure ZFO, respectively. The improved photocatalytic performance can be attributed to the formation of S-scheme heterojunctions between SIS and ZFO, which results in the strong absorption of visible light, the enhanced separation of electron-hole pairs, and the higher redox ability of photoinduced charges. Additionally, SIS/ZFO composites have excellent magnetic properties and high stability, and the recovered samples still retained good photocatalytic degradation performances after four cycles of experiments. Thus, the coupling of SIS with ZFO provides a valuable strategy for enhancing photocatalytic potential and offers a promising pathway for water remediation.

Bismuth Tungstate Nanoplates-Vis Responsive Photocatalyst for Water Oxidation

The development of visible-light-responsive (VLR) semiconductor materials for effective water oxidation is significant for a sustainable and better future. Among various candidates, bismuth tungstate (Bi2WO6; BWO) has attracted extensive attention because of many advantages, including efficient light-absorption ability, appropriate redox properties (for O2 generation), adjustable morphology, low cost, and profitable chemical and optical characteristics. Accordingly, a facile solvothermal method has been proposed in this study to synthesize two-dimensional (2D) BWO nanoplates after considering the optimal preparation conditions (solvothermal reaction time: 10-40 h). To find the key factors of photocatalytic performance, various methods and techniques were used for samples' characterization, including XRD, FE-SEM, STEM, TEM, HRTEM, BET-specific surface area measurements, UV/vis DRS, and PL spectroscopy, and photocatalytic activity was examined for water oxidation under UV and/or visible-light (vis) irradiation. Famous commercial photocatalyst-P25 was used as a reference sample. It was found that BWO crystals grew anisotropically along the {001} basal plane to form nanoplates, and all properties were controlled simultaneously by tuning the synthesis time. Interestingly, the most active sample (under both UV and vis), prepared during the 30 h solvothermal reaction at 433 K (BWO-30), was characterized by the smallest specific surface area and the largest crystals. Accordingly, it is proposed that improved crystallinity (which hindered charge carriers' recombination, as confirmed by PL), efficient photoabsorption (using the smallest bandgap), and 2D mesoporous structure are responsible for the best photocatalytic performance of the BWO-30 sample. This report shows for the first time that 2D mesoporous BWO nanoplates might be successfully prepared through a facile template-free solvothermal approach. All the above-mentioned advantages suggest that nanostructured BWO is a prospective candidate for photocatalytic applications under natural solar irradiation.

Fabrication of an S-Scheme Heterojunction Photocatalyst MoS2/PANI with Greatly Enhanced Photocatalytic Performance

As a promising catalyst, MoS2 has been widely studied owing to its high chemical reactivity, excellent electrical carrier mobility, good optical properties, and narrow band gap. However, the high recombination rate of photoinduced charge carriers limits its practical application in photocatalysis. In this study, MoS2 was coupled with PANI to fabricate an S-scheme heterojunction MoS2/PANI. The synthesized products were characterized systematically, and their photocatalytic properties were evaluated by photocatalytic degradation of norfloxacin (NOR) and rhodamine B (RhB). The obtained results indicated that the fabricated MoS2/PANI inorganic-organic heterojunction displayed tremendously enhanced photocatalytic activity. The degradation efficiencies for 60 mg L-1 of NOR and RhB are 86 and 100% under the simulated sunlight irradiation for 1 h with 10 mg of catalyst, which are 13 and 47 times higher than those of pure MoS2, respectively. Interestingly, it is superior to the previously reported related materials. The remarkably enhanced photocatalytic activity of MoS2 is assigned to the high charge conductivity feature of PANI and the formed S-scheme heterojunction that result in a steric separation of holes and electrons and conserve the initial powerful redox ability of the parent catalysts. This study provides a facile method to greatly improve the photocatalytic activity of MoS2 and facilitates its application for highly efficient removal of organic pollutants, such as antibiotic drugs and organic dyes, utilizing solar energy.

Embedding Cu3P quantum dots onto BiOCl nanosheets as a 0D/2D S-scheme heterojunction for photocatalytic antibiotic degradation

The development of highly efficient photocatalysts is vital for solvinge the problem of environmental pollution. In this study, a novel zero-/two-dimensional (0D/2D) S-scheme heterojunction was fabricated by integrating 0D copper phosphide (Cu₃P) quantum dots (QDs) with a size in the range of 3-8 nm onto 2D bismuth oxychloride (BiOCl) nanosheets using a self-assembly tactic. The Cu₃P/BiOCl presented intimate interface contact and high photocatalytic activity for the degradation of antibiotics (tetracycline hydrochloride (TC), oxytetracycline, ofloxacin). The optimal sample exhibited the highest photocatalytic TC degradation, with a total removal rate of 86% after 6 min under full-spectrum irradiation, which was higher than that of compared to individual BiOCl. The improved activity of the Cu₃P/BiOCl heterojunction was attributed to the enhanced separation of the photogenerated carriers due to the S-scheme mode which can promote the recombination of useless photogenerated carriers and maintain photogenerated carriers with stronger redox potentials for photocatalytic reaction. In addition, employing Cu₃P QDs and BiOCl nanosheets to construct an S-scheme composite can offer abundant active sites for antibiotic degradation. In brief, this study demonstrates that Cu₃P QDs are an effective cocatalyst for degrading organic pollutants, which provides novel inspiration for the future design of green recycling photocatalysts for wastewater remediation.

Photocatalytic degradation of tetracycline antibiotic over a flower-like S-doped BiOBr: Performance, mechanism insight and toxicity assessment

A new catalyst of S-BiOBr flower-like morphology was synthesized by simple pyrolysis and further used for photocatalytic degradation of TC. Phase structure analysis, elemental analysis and micromorphological analysis confirmed that S doping has a reinforcing effect on the polarization between the [Bi2O2S]2+ and [Br2]2- layers and is conducive to interlayer polarization and rapid charge transfer. In addition, its unique petal morphology is more favorable to the adsorption of contaminants on its surface and accelerates the reaction of catalyst surfactant with contaminants. It was also found that S-BiOBr degrades TC significantly better than single BiOBr@HCs, with up to 99.1% in 60 min illumination. In addition, the S-BiOBr catalyst has good reusability in antibiotic degradation. The results of photocatalytic mechanism analysis show that free radical O2− plays a major role in the photodegradation of organic model pollutants. Intermediates in TC degradation were identified, and their potential degradation pathways were prospected, and the toxicity development of TC in the degradation process was analyzed by toxicity assessment software. The S-BiOBr photocatalytic system developed in this paper provides a new idea for effective modification of bismuth-based semiconductors and has important guiding significance for future water purification.