Study of synergistic effect of cobalt and carbon codoped with TiO2 photocatalyst for visible light induced degradation of phenol

Ag/Cr-TiO2 and Pd/Cr-TiO2 for Organic Dyes Elimination and Treatment of Polluted River Water in Presence of Visible Light

In this work, photocatalytic materials constituted by Cr-doped TiO2 (Cr-TiO2) decorated with noble metals show high effectiveness in the mineralization of Acid Orange 7 (AO7) and in the disinfection of real river water. The materials were firstly obtained by sol-gel method to get Cr-TiO2 that was subsequently modified by photochemical deposition of Ag or Pd nanoparticles (Ag/Cr-TiO2, Pd/Cr-TiO2). Chemical-physical characterization results evidenced that the noble metals were homogeneously distributed on the Cr-TiO2 surface. By using Pd(0.25%)/Cr-TiO2, the AO7 discoloration efficiency was about 91.4% after only 60 min of visible irradiation, which can be due to the lowest band gap of this material. Moreover, nitrates, chlorides, total hardness, and coliform bacteria content significantly decreased after the treatment of real river water samples (that is contaminated by industrial and domestic effluents) under UV and visible light irradiation in the presence of TiCrOx decorated with noble metals. One hundred percent of elimination rate for E. coli, total coliforms, and other enterobacteriaceae (without regrowth) was achieved by using Ag/Cr-TiO2 as photocatalyst.

Improving the efficiency of metal ions doped Fe2O3 nanoparticles: Photocatalyst for removal of organic dye from aqueous media

The metal ion-based nanocomposite photocatalysts were accepted to exhibit a wide range of photocatalytic and biological applications. In this paper, we synthesize bare Fe₂O₃, 1 wt% metal (Ag, Co, and Cu) doped Fe₂O₃ nanoparticles (NPs) using a simple hydrothermal process and wet impregnation method. The as-prepared nanomaterials crystalline structure, shape, optical characteristics, and elemental composition were determined by using X-ray powder diffraction (XRD), X-ray photoelectron spectroscopy (XPS), Scanning electron microscope (SEM), Energy-dispersive X-ray (EDS) and Transmission electron microscopy (TEM) techniques. Furthermore, the synthesized nanocomposites were utilized as a photosensitizer for the degradation of reactive red (RR120) and orange II (O-II) dyes under sunlight irradiation. The synthesized 1 wt% Ag-Fe₂O₃ (AgF) NPs samples exhibit a more exceptional catalytic performance of RR120 and O-II dyes (98.32%) within 120 min than the existing Fe₂O₃, 1 wt% Co-Fe₂O₃, and Cu-Fe₂O₃ NPs. The effect of parameters such as exciton formation under solar irradiation, charge recombination rate, and surface charge availability. The metal oxide-doped nanocomposite economic relevance is revealed by their long-term durability and recyclability in photodegradation reactions. The photocatalytic investigations show that the active species O₂^∙-, HO^∙ and h⁺ play an important role in the dye degradation process. This research might pave the opportunity for the sustainable development of greater photocatalysts for photodegradation and a wide range of environmental applications.

C, F co-doping Ag/TiO2 with visible light photocatalytic performance toward degrading Rhodamine B

The organic pollutants in industrial wastewater continuously endanger human health. Therefore, effective treatment of organic pollutants is very urgent. Photocatalytic degradation technology is an excellent solution to remove it. TiO₂ photocatalysts are easy to prepare and have high catalytic activity, unfortunately, TiO₂ only absorbs ultraviolet light limiting its utilization of visible light. In this study, a facile environmentally friendly synthesis of Ag-coated on micro-wrinkled TiO₂-based catalysts in order to extend the absorption of Visible light. Firstly, a fluorinated titanium dioxide precursor was prepared by a one-step solvothermal method, and the precursor was calcined at high temperature in a nitrogen atmosphere to form a carbon dopant, and then a surface silver-deposited carbon/fluorine co-doped TiO₂ photocatalyst C/F-Ag-TiO₂ was prepared by a hydrothermal method The results showed that the Ag was coated on the wrinkled TiO₂ layer and C/F-Ag-TiO₂ photocatalyst was synthetized successfully. Benefit from the synergistic effect of doped carbon and fluorine atoms in combination with the quantum size effect of the surface silver nanoparticles, the band gap energy of C/F-Ag-TiO₂ (2.56 eV) is obviously lower than anatase (3.2eV). The photocatalyst achieved an impressive degradation rate of 84.2% for Rhodamine B in 4 h, with a degradation rate constant of 0.367 h^-1, which was 17 times higher than that of P25 under visible light. Therefore, the C/F-Ag-TiO₂ composite is a promising candidate as a highly efficient photocatalyst for environmental remediation.

Experimental and computational studies of photoelectrochemical degradation of atrazine by modified nanoporous titanium dioxide

The presence of herbicides like Atrazine (ATZ) in groundwater from non-target runoff of the agriculture industry becomes a big concern due to its potential negative impacts on the environment and human health. The use of advanced oxidative processes (AOP) to remove harmful contaminants has been shown to be effective for wastewater treatment. Herein, we report on an advanced photoelectrochemical (PEC) approach based on electrochemically modified nanoporous TiO₂ electrode for efficient degradation of ATZ. The electrochemical treated TiO₂ electrodes were shown to have a six-fold increase in the photo-current density over the untreated ones. This increase in PEC activity was attributed to the increase in Ti³⁺ sites after the electrochemical modification, which was corroborated by low-temperature electron paramagnetic resonance (EPR) studies. The removal of ATZ by the PEC process resulted in a rate constant of 1.91 × 10^-3 s^-1, compared to 3.12 × 10^-4 s^-1 obtained by a strictly photocatalytic process. Liquid-Chromatography Mass-Spectrometric measurements showed the modified TiO₂ electrodes highly effective at removing ATZ, with 96.1% removed after 10 h. Monitoring of the common degradation products desethyl atrazine (DEA), desisopropyl atrazine (DIA) and desethyl desisopropyl atrazine (DDA) revealed very low concentrations throughout the degradation process, indicating that further degradation was achieved. Quantum mechanical-based test for overall free radical scavenging activity (QM-ORSA) computational studies were performed and a mechanism for the N-dealkylation processes of ATZ has been proposed.

Concurrent fabrication of ZnO-ZnFe2O4 hybrid nanocomposite for enhancing photocatalytic degradation of organic pollutants and its bacterial inactivation

In this research, we looked at how heterostructure fabrication, phase ratio, and crystalline nature affect the photocatalytic activity of ZnO/ZnFe₂O₄ nanocomposite for the degradation of Rhodamine B (RhB) dye when exposed to sunlight irradiation. Magnetic ZnO/ZnFe₂O₄ hybrid nanocomposites were made using a co-precipitation technique. The synthesized hybrid nanocomposite were analyzed using a variety of characterization techniques to understand more about their chemical, crystallinity, and photoactive characteristics. Using UV-Visible spectra, the absorption and photocatalytic efficiency of photocatalysts were investigated. By using XPS and FTIR measurements, the surface composition and functionalization of the produced nanocomposite were observed. The synthesized ZnO/ZnFe₂O₄ nanocomposites exhibit irregular morphologies, and the average crystallite size is about 30 nm, by the findings of the transmission electron microscope. When exposed to solar light for 90 min, the prepared photocatalysts exceed ZnO nanoparticles in terms of photocatalytic performance by more than 45%. Pseudo-first-order kinetics governs the adsorption of RhB onto nanocomposite surfaces. Finally, the ZnO/ZnFe₂O₄ nanocomposites were employed for antibacterial treatments against the waterborne pathogens Escherichia coli (E.coli) and Staphylococcus aureus (S.aureus). The outcomes demonstrated that the optimal disinfection efficiency against E. coli and S. aureus germs were 98.6 and 97.4%, respectively, associated with superior cycling durability. Therefore, this work offers a simple and rapid approach to the development of hybrid nanocomposites that could be used to create various photocatalytic and optical materials.

Semiconductors Application Forms and Doping Benefits to Wastewater Treatment: A Comparison of TiO2, WO3, and g-C3N4

Photocatalysis has been vastly applied for the removal of contaminants of emerging concern (CECs) and other micropollutants, with the aim of future water reclamation. As a process based upon photon irradiation, materials that may be activated through natural light sources are highly pursued, to facilitate their application and reduce costs. TiO2 is a reference material, and it has been greatly optimized. However, in its typical configuration, it is known to be mainly active under ultraviolet radiation. Thus, multiple alternative visible light driven (VLD) materials have been intensively studied recently. WO3 and g-C3N4 are currently attractive VLD catalysts, with WO3 possessing similarities with TiO2 as a metal oxide, allowing correlations between the knowledge regarding the reference catalyst, and g-C3N4 having an interesting and distinct non-metallic polymeric structure with the benefit of easy production. In this review, recent developments towards CECs degradation in TiO2 based photocatalysis are discussed, as reference catalyst, alongside the selected alternative materials, WO3 and g-C3N4. The aim here is to evaluate the different techniques more commonly explored to enhance catalyst photo-activity, specifically doping with multiple elements and the formation of composite materials. Moreover, the possible combination of photocatalysis and ozonation is also explored, as a promising route to potentialize their individual efficiencies and overcome typical drawbacks.