Interactions between bacteria and nano (micro)-sized polystyrene particles by bacterial responses and microscopy

Nanoplastics enhance the denitrification process and microbial interaction network in wetland soils

With the widespread presence of plastic waste in ecosystems, it is imperative to understand the response of natural processes to micro- and nanoplastic pollution pressures. However, the effects of nanoplastics on biogeochemical cycles are still overlooked and controversial. This study investigated the effects of three particle sizes (100 μm, 7 μm, and 80 nm) of polystyrene (PS) micro/nanoplastics (0.08 % of mass concentration) on denitrification processes and nirS/nirK denitrifying bacterial communities in wetland soils. The results indicated that PS nanoplastics were found to significantly enhance denitrification rates from 21.30 to 54.73 μmol N2·h-1·kg-1, increasing by 1.57 times compared to the control. Exposure to nanoplastics caused shifts in the composition and structure of the nirS-type denitrifier community. LEfSe analysis, random forest, and Mantel tests revealed that nirS denitrifying bacteria, especially Sideroxydans, played a pivotal role in driving denitrification rates (Mantel's R = 0.24, p = 0.002), likely due to the faster release of organic substrates from nanoplastics. Microbial co-occurrence networks demonstrated that nanoplastic amendments fostered a denser denitrifier network and led to shifts in keystone species. Sideroxydans appeared more likely to cooperate with other bacteria, such as Burkholderiales, to complete denitrification processes. This study suggests that nanoplastics are a potentially stronger driver of denitrification than microplastics, providing insight into the impact of plastic pollutants on biogeochemical cycling in natural wetland ecosystems. Given the widespread distribution of wetlands, the potential increase in gaseous nitrogen emissions due to nanoplastics pollution warrants attention.

Continuous generation and release of microplastics and nanoplastics from polystyrene by plastic-degrading marine bacteria

Plastic waste released into the environments breaks down into microplastics due to weathering, ultraviolet (UV) radiation, mechanical abrasion, and animal grazing. However, little is known about the plastic fragmentation mediated by microbial degradation. Marine plastic-degrading bacteria may have a double-edged effect in removing plastics. In this study, two ubiquitous marine bacteria, Alcanivorax xenomutans and Halomonas titanicae, were confirmed to degrade polystyrene (PS) and lead to microplastic and nanoplastic generation. Biodegradation occurred during bacterial growth with PS as the sole energy source, and the formation of carboxyl and carboxylic acid groups, decreased heat resistance, generation of PS metabolic intermediates in cultures, and plastic weight loss were observed. The generation of microplastics was dynamic alongside PS biodegradation. The size of the released microplastics gradually changed from microsized plastics on the first day (1344 nm and 1480 nm, respectively) to nanoplastics on the 30th day (614 nm and 496 nm, respectively) by the two tested strains. The peak release from PS films reached 6.29 × 106 particles/L and 7.64 × 106 particles/L from degradation by A. xenomutans (Day 10) and H. titanicae (Day 5), respectively. Quantification revealed that 1.3% and 1.9% of PS was retained in the form of micro- and nanoplastics, while 4.5% and 1.9% were mineralized by A. xenomutans and H. titanicae at the end of incubation, respectively. This highlights the negative effects of microbial degradation, which results in the continuous release of numerous microplastics, especially nanoplastics, as a notable secondary pollution into marine ecosystems. Their fates in the vast aquatic system and their impact on marine lives are noted for further study.

Polystyrene microplastics interaction and influence on the growth kinetics and metabolism of tilapia gut probiotic Bacillus tropicus ACS1

Gut probiotic bacteria play a significant role in the host health, immunity, and survival. In aquaculture, changes in the gut microbiome of fishes affect the overall productivity and product quality. In the scenario of growing plastic pollution and associated microplastic prevalence, the current study was designed to investigate the interactions and impact of prepared polystyrene microplastics (PS-MPs) of irregular surface morphology on a probiotic bacteria Bacillus tropicus ACS1, isolated from the gut of Oreochromis mossambicus (commonly called as Tilapia). The cell viability was significantly increased along with changes in bacterial growth kinetics upon exposure to varying concentrations of PS-MPs. The microplastic exposure also increased the production of exopolysaccharides (EPS) and induced slight changes in the IR spectra of the EPS. A peak representing a carbonyl linkage that could be attributed to the glycosidic linkages between sugars disappeared following exposure to higher concentrations of PS-MPs. The interaction between the bacteria and the microplastics was visualized using scanning electron microscopy (SEM) and the colonization of the bacteria with active biofilm formation was observed. The investigation of PS-MP induced oxidative stress in the bacteria revealed the generation of reactive oxygen species (ROS) and increase in anti-oxidant enzyme concentrations, superoxide dismutase (SOD), and catalase. The study provides new insights into the effect of microplastics on gut probiotics of an economically significant aquaculture species.

Exposure to polystyrene nanoplastics reduces bacterial and fungal biomass in microfabricated soil models

Nanoplastics have been proven to induce toxicity in diverse organisms, yet their effect on soil microbes like bacteria and fungi remains largely unexplored. In this paper, we used micro-engineered soil models to investigate the effect of polystyrene (PS) nanospheres on Pseudomonas putida and Coprinopsis cinerea. Specifically, we explored the effects of increasing concentrations of 60 nm carboxylated bovine serum albumin (BSA) coated nanospheres (0, 0.5, 2, and 10 mg/L) on these bacterial and fungal model organisms respectively, over time. We found that both microorganisms could disperse through the PS solution, but long-distance dispersal was reduced by high concentrations. Microbial biomass decreased in all treatments, in which bacteria showed a linear dose response with the strongest effect at 10 mg/L concentration, and fungi showed a non-linear response with the strongest effect at 2 mg/L concentration. At the highest nanoplastics concentration, the first colonizing fungal hyphae adsorbed most of the PS nanospheres present in their vicinity, in a process that we termed the 'vacuum cleaner effect'. As a result, the toxicity effect of the original treatment on subsequently growing fungal hyphae was reduced to a growth level indistinguishable from the control. We did not find evidence that nanoplastics are able to penetrate bacterial nor fungal cell walls. Overall, our findings provide evidence that nanoplastics can cause a direct negative effect on soil microbes and highlight the need for further studies that can explain how the microbial stress response might affect soil functions.

Do microbial decomposers find micro- and nanoplastics to be harmful stressors in the aquatic environment? A systematic review of in vitro toxicological research

Microbial decomposers (bacteria and fungi) are likely to interact with plastic particles introduced into natural systems, particularly micro- and nanoplastics (MNPs), exposing them to a variety of risks. In vitro testing has proven to be an accessible and viable method for gaining insights into how microbial decomposers behave individually and systemically toward MNPs. Recent advances have enhanced our understanding of MNP interactions with organisms, revealing the molecular foundations of adaptive responses as well as the biological impact and potential risks to MNPs. Despite widespread attention, this topic has not yet been reviewed. Here, we conducted a systematic review of the available research to critically assess and highlight the most recent advances in two major areas: (1) methods for in vitro evaluation of environmentally relevant microbial decomposers to MNPs; and (2) current understanding of the underlying toxicity mechanisms gained from in vitro assessments. We also addressed the key considerations throughout and proposed available opportunities in the field. Our analysis revealed that MNPs' toxicity has been studied in vitro either alone or in combination with other contaminants (e.g., antibiotics and metallic nanoparticles), with Escherichia coli and polystyrene particles receiving the most attention. Moreover, there were methodological differences in terms of MNP size, shape, polymer, surface characteristics, exposure period, and concentrations. A combination of methods, including growth-viability tests, biochemical assays, and omics profiling (metabolomics and transcriptomics), were employed to detect the effects of MNP exposure and explain its toxicity mechanism. The current literature suggests that the impacts of MNPs on microbial decomposers include alterations in the antioxidative system, gene expression levels and cell-membrane permeability and oxidative damage, all of which can be further influenced by MNPs interaction with other contaminants. This review will thus provide critical insights and up-to-date knowledge to assist novices and experts in promoting advancements and research.

Exposure pathways, environmental processes and risks of micro (nano) plastics to crops and feasible control strategies in agricultural regions

Micro/nanoplastics (MPs/NPs) pollution may adversely impact agricultural ecosystems, threatening the sustainability and security of agricultural production. This drives an urgent need to comprehensively understand the environmental behavior and effects of MPs/NPs in soil and atmosphere in agricultural regions, and to seek relevant pollution prevention strategies. The rhizosphere and phyllosphere are the interfaces where crops are exposed to MPs/NPs. The environmental behavior of MPs/NPs in soil and atmosphere, especially in the rhizosphere and phyllosphere, determines their plant accessibility, bioavailability and ecotoxicity. This article comprehensively reviews the transformation and migration of MPs/NPs in soil, transportation and deposition in the atmosphere, environmental behavior and effects in the rhizosphere and phyllosphere, and plant uptake and transportation pathways. The article also summarizes the key factors controlling MPs/NPs environmental processes, including their properties, biotic and abiotic factors. Based on the sources, environmental processes and intake risks of MPs/NPs in agroecosystems, the article offers several feasible pollution prevention and risk management options. Finally, the review highlights the need for further research on MPs/NPs in agro-systems, including developing quantitative detection methods, exploring transformation and migration patterns in-situ soil, monitoring long-term field experiments, and establishing pollution prevention and control systems. This review can assist in improving our understanding of the biogeochemistry behavior of MPs/NPs in the soil-plant-atmosphere system and provide a roadmap for future research.

Size-dependent promotion of micro(nano)plastics on the horizontal gene transfer of antibiotic resistance genes in constructed wetlands

Constructed wetlands (CWs) have been identified as significant sources of micro(nano)plastics (MPs/NPs) and antibiotic resistance genes (ARGs) in aquatic environments. However, little is known about the impact of MPs/NPs exposure on horizontal gene transfer (HGT) of ARGs and shaping the corresponding ARG hosts' community. Herein, the contribution of polystyrene (PS) particles (control, 4 mm, 100 μm, and 100 nm) to ARG transfer was investigated by adding an engineered fluorescent Escherichia coli harboring RP4 plasmid-encoded ARGs into CWs. It was found MPs/NPs significantly promoted ARG transfer in a size-dependent manner in each CW medium (p < 0.05). The 100 μm-sized PS exhibited the most significant promotion of ARG transfer (p < 0.05), whereas 100 nm-sized PS induced limited promotion due to its inhibitory activity on microbes. The altered RP4-carrying bacterial communities suggested that MPs/NPs, especially 100 µm-PS, could recruit pathogenic and nitrifying bacteria to acquire ARGs. The increased sharing of RP4-carrying core bacteria in CW medium further suggested that ARGs can spread into CW microbiome using MPs/NPs as carriers. Overall, our results highlight the high risks of ARG dissemination induced by MPs/NPs exposure and emphasize the need for better control of plastic disposal to prevent the potential health threats.

Rising to the surface: capturing and detecting bacteria by rationally-designed surfaces

Analytical microbiology has made substantial progress since its conception, starting from potato slices, through selective agar media, to engineered surfaces modified with capture probes. While the latter represents the dominant approach in designing sensors for bacteria detection, the importance of sensor surface properties is frequently ignored. Herein, we highlight their significant role in the complex process of bacterial transition from planktonic to sessile, representing the first and critical step in bacteria detection. We present the main surface features and discuss their effect on the bio-solid interface and the resulting sensing capabilities for both flat and particulate systems. The concepts of rationally-designed surfaces for enhanced bacterial detection are presented with recent examples of sensors (capture probe-free) relying solely on surface cues.

Microplastics and nanoplastics toxicity assays: A revision towards to environmental-relevance in water environment

Plastic pollution poses a serious risk to the oceans, freshwater ecosystems, and land-based agricultural production. Most plastic waste enters rivers and then reaches the oceans, where its fragmentation process begins and the forming of microplastics (MPs) and nanoplastics (NPs). These particles increase their toxicity by the exposition to external factors and binding environmental pollutants, including toxins, heavy metals, persistent organic pollutants (POPs), halogenated hydrocarbons (HHCs), and other chemicals, which further and cumulatively increase the toxicity of these particles. A major disadvantage of many MNPs in vitro studies is that they do not use environmentally relevant microorganisms, which play a vital role in geobiochemical cycles. In addition, factors such as the polymer type, shapes, and sizes of the MPs and NPs, their exposure times and concentrations must be taken into account in in vitro experiments. Last but not least, it is important to ask whether to use aged particles with bound pollutants. All these factors affect the predicted effects of these particles on living systems, which may not be realistic if they are insufficiently considered. In this article, we summarize the latest findings on MNPs in the environment and propose some recommendations for future in vitro experiments on bacteria, cyanobacteria, and microalgae in water ecosystems.

Nanoplastics impacts on Thiobacillus denitrificans: Effects of size and dissolved organic matter

The widespread distribution of nanoplastics and dissolved organic matter (DOM) in sewage raises concerns about the potential impact of DOM on the bioavailability of nanoplastics. In this study, the effects of different sizes (100 nm and 350 nm) of polystyrene nanoplastics (PS-NPs, 50 mg/L) and combined with 10 mg/L or 50 mg/L DOMs (fulvic acid, humic acid and sodium alginate) on the growth and denitrification ability of Thiobacillus denitrificans were investigated. Results showed that 100 nm PS-NPs (50 mg/L) cause a longer delay in the nitrate reduction (3 days) of T. denitrificans than 350 nm PS-NPs (2 days). Furthermore, the presence of DOM exacerbated the adverse effect of 100 nm PS-NPs on denitrification, resulting in a delay of 1-4 days to complete denitrification. Fulvic acid (50 mg/L) and humic acid (50 mg/L) had the most significant adverse effect on increasing 100 nm PS-NPs (50 mg/L), causing a reduction of 20 mmol/L nitrate by T. denitrificans in nearly 7 days. It is noteworthy that the presence of DOM did not modify the adverse effect of 350 nm PS-NPs on denitrification. Further analysis of toxicity mechanism of PS-NPs revealed that they could induce reactive oxygen species (ROS) and suppressed denitrification gene expression. The results suggested that DOM may assist in the cellular internalization of PS-NPs by inhibiting PS-NPs aggregation, leading to the increased ROS levels and accelerated T. denitrificans death. This study highlights the potential risk of nanoplastics to autotrophic denitrifying bacteria in the presence of DOM and provides new insights for the treatment of nitrogen-containing wastewater by T. denitrificans.

Biosorption of sub-micron-sized polystyrene microplastics using bacterial biofilms

Microplastics are becoming a global concern because they pose potential ecological and toxicological risks to organisms. Thus, removing microplastics from aquatic environments is important. In this study, we evaluated the capability of bacterial biofilms as a biological source for the biosorptive removal of sub-micron-sized polystyrene (PS) microplastics. Three bacterial strains-specifically, Pseudomonas aeruginosa, Bacillus subtilis, and Acinetobacter sp.-were used to form biofilms, and each biofilm was tested in batch experiments for the removal of sub-micron-sized PS microplastics. The Acinetobacter sp. biofilm demonstrated excellent removal performance against 430 nm-PS microplastics than other bacterial biofilms and showed a removal capacity of 715.5 mg/g upon treatment with the PS microplastics for 20 min, thus it employed further adsorption experiments. The biosorption of 430 nm-PS microplastics onto the Acinetobacter sp. biofilm was well explained by the pseudo-second-order kinetics and Freundlich isotherm models. Fourier transform infrared analysis indicated that biosorption of 430 nm-PS microplastics onto the Acinetobacter sp. biofilm involved chemisorption. Three environmental parameters-temperature, pH, and coexisting ions-marginally affected the biosorption of 430 nm-PS microplastics onto Acinetobacter sp. biofilm. However, the biosorption capability of Acinetobacter sp. biofilm was diminished when the 430 nm-PS microplastics were incubated in environmental freshwaters for 7 d.

Molecular assembly of extracellular polymeric substances regulating aggregation of differently charged nanoplastics and subsequent interactions with bacterial membrane

Extracellular polymeric substances (EPS) represent an interface between microbial cells and aquatic environment, where nanoplastics acquire coatings to alter their fate and toxicity. However, little is known about molecular interactions governing modification of nanoplastics at biological interfaces. Molecular dynamics simulations combining experiments were conducted to investigate assembly of EPS and its regulatory roles in the aggregation of differently charged nanoplastics and interactions with bacterial membrane. Driven by hydrophobic and electrostatic interactions, EPS formed micelle-like supramolecular structures with hydrophobic core and amphiphilic exterior. Different components, depending on their hydrophobicity and charge, were found to promote or suppress EPS assembly. Neutral and hydrophobic nanoplastics showed unbiased adsorption of EPS species, while cationic and anionic nanoplastics were distinct and attracted specific molecules of opposite charges. Compared with isolated EPS, assembled EPS concealed hydrophobic groups to be less adsorbed by nanoplastics. Aggregation of nanoplastics was alleviated by EPS due to electrostatic repulsion plus steric hindrance. ESP suppressed binding of cationic nanoplastics to the bacterial membrane through reducing the surface charge. Neutral and anionic nanoplastics showed weak membrane association, but their binding interactions were promoted by EPS. The structural details revealed here provided molecular level insights into modifications of nanoplastics at the eco-environment interface.

From marine to freshwater environment: A review of the ecotoxicological effects of microplastics

Microplastics (MPs) have been widely detected in the world's water, which may pose a significant threat to the ecosystem as a whole and have been a subject of much attention because their presence impacts seas, lakes, rivers, and even the Polar Regions. There have been numerous studies that report direct adverse effects on marine organisms, but only a few have explored their ecological effects on freshwater organisms. In this field, there is still a lack of a systematic overview of the toxic effects and mechanisms of MPs on aquatic organisms, as well as a consistent understanding of the potential ecological consequences. This review describes the fate and impact on marine and freshwater aquatic organisms. Further, we examine the toxicology of MPs in order to uncover the relationship between aquatic organism responses to MPs and ecological disorders. In addition, an overview of the factors that may affect the toxicity effects of MPs on aquatic organisms was presented along with a brief examination of their identification and characterization. MPs were discussed in terms of their physicochemical properties in relation to their toxicological concerns regarding their bioavailability and environmental impact. This paper focuses on the progress of the toxicological studies of MPs on aquatic organisms (bacteria, algae, Daphnia, and fish, etc.) of different trophic levels, and explores its toxic mechanism, such as behavioral alternations, metabolism disorders, immune response, and poses a threat to the composition and stability of the ecosystem. We also review the main factors affecting the toxicity of MPs to aquatic organisms, including direct factors (polymer types, sizes, shapes, surface chemistry, etc.) and indirect factors (persistent organic pollutants, heavy metal ions, additives, and monomer, etc.), and the future research trends of MPs ecotoxicology are also pointed out. The findings of this study will be helpful in guiding future marine and freshwater rubbish studies and management strategies.

Adsorptive removal of micron-sized polystyrene particles using magnetic iron oxide nanoparticles

Microplastics are able to pass through many filtration systems due to their small sizes, making it difficult to remove them from, for example, water. In this study, we evaluated the ability of using magnetic iron oxide (Fe₃O₄) nanoparticles to achieve the adsorptive removal of micron-sized polystyrene (microPS) particles. Application of a magnet for 3 min to an aqueous sample of microPS particles mixed with iron oxide nanoparticles for 1 min was able to effectively remove the microPS particles from the water. Transmission electron microscopy images of such samples showed the formation of Fe₃O₄-PS complexes due to the adsorption of PS particles onto iron oxide nanoparticles. This adsorption followed the pseudo-first order kinetic and Langmuir isotherm model. Hydrophobic interactions were concluded from our experiments to be the main interactions involved in the aggregation of iron oxide with PS particles. Ions present in an environmental freshwater sample inhibited the ability of iron oxide particles to become adsorbed PS particles, but the adsorption performance was improved by increasing the amount of iron oxide particles. The iron oxide particles could be recovered from the Fe₃O₄-PS complexes by desorption process. Our study showed the potential advantages of iron oxide particles for removing environmental pollutants of microplastics via highly efficient and environmental-friendly procedure.