Facile synthesis of broom stick like FeOCl/g-C3N5 nanocomposite as novel Z-scheme photocatalysts for rapid degradation of pollutants

Enhanced oxidative degradation of 2,4-dichlorophenol by iron oxychloride supported on graphitic carbon nitride via peroxymonosulfate activation: Significant role of Fe(II)/Fe(III) conversion cycle

The activation of peroxymonosulfate (PMS) by heterogeneous catalysts presents an exciting but challenging strategy for degrading persistent organic pollutants in water. Iron oxychloride (FeOCl) is considered a promising heterogeneous catalyst due to its unique oxygen bridge structure, which could render it more active by facilitating the iron valence transitions between Fe(II) and Fe(III). However, the limited Fe(II)/Fe(III) conversion cycle rate hinders its catalytic activity, leading to unsatisfactory PMS activations in practical applications. Herein, we demonstrated the performance and the mechanistic pathway of enhanced FeOCl (CNFeOCl) catalytic activation using a graphitic carbon nitride (g-C3N4) with a unique electronic structure as a carrier employing 2,4-dichlorophenol (2,4-DCP) as a representative pollutant. The CNFeOCl/PMS system achieved complete degradation of 2,4-DCP (30 mg/L) in a short time (<5 min), whereas the FeOCl/PMS system degraded only 35.98% under the same conditions. The high 2,4-DCP degradation rate of CNFeOCl was due to its improved Fe(II)/Fe(III) ratio (34.34%/40.03%), increased specific surface area (30.32 m2/g), and reduced charge-transfer resistance. Combining a series of characterizations, electron spin resonance (ESR) detection, and quenching experiments, the investigations elucidated the enhanced catalytic activation mechanism of CNFeOCl which includes dominant reactive oxygen species (ROS) generation and some key factors that generally affected the efficiency of oxidative degradation. We believe this study offers new insights into the intrinsic role of g-C3N4 supported FeOCl for PMS activation and provides theoretical support to guide the rational design for developing efficient iron-based catalysts toward heterogeneous catalysis.

Boosted visible-light-induced photo-Fenton degradation of organic pollutants over a novel direct Z-scheme NH2-MIL-125(Ti)@FeOCl heterojunction catalyst

Improving the charge separation, charge transfer, and effective utilization is crucial in a photocatalysis system. Herein, we prepared a novel direct Z-scheme NH2-MIL-125(Ti)@FeOCl (Ti-MOF@FeOCl) composite photocatalyst through a simple method. The prepared composite catalyst was utilized in the photo-Fenton degradation of Rhodamine B (RhB) and ciprofloxacin (CIP). The Ti-MOF@FeOCl (10FeTi-MOF) catalyst exhibited the highest catalytic performance and degraded 99.1 and 66% of RhB and CIP, respectively. However, the pure NH2-MIL-125(Ti) (Ti-MOF) and FeOCl catalysts achieved only 50 and 92% of RhB and 50 and 37% of CIP, respectively. The higher catalytic activities of the Ti-MOF@FeOCl composite catalyst could be due to the electronic structure improvements, photoinduced charge separations, and charge transfer abilities in the catalyst system. The composite catalysts have also enhanced adsorption and visible light-responsive properties, allowing for efficient degradation. Furthermore, the electron paramagnetic resonance (EPR) signals, the reactive species trapping experiments, and Mott-Schottky (M - S) measurements revealed that the photogenerated superoxide radical (•O2-), hydroxyl radical (•OH), and holes (h+) played a vital role in the degradation process. The results also demonstrated that the Ti-MOF@FeOCl heterojunction composite catalysts could be a promising photo-Fenton catalyst system for the environmental remediation. Environmental implications The discharging of toxic contaminants such as organic dyes, antibiotics, and other emerging pollutants to the environment deteriorates the ecosystem. Specifically, the residues of organic pollutants recognized as a threat to ecosystem and a cause for carcinogenic effects. Among them, ciprofloxacin is one of antibiotics which has biological resistance, and metabolize partially in the human or animal bodies. It is also difficult to degrade ciprofloxacin completely with traditional treatment methods. Similarly, organic dyes are also toxic and a cause for carcinogenic effects. Therefore, effective degradation of organic pollutants such as RhB and ciprofloxacin with appropriate method is crucial.

Highly efficient hydrogen production and selective CO2 reduction by the C3N5 photocatalyst using only visible light

The production of energy sources by metal-free photocatalysts based on graphitic carbon nitride (g-C3N4) has garnered substantial attention. In this study, nitrogen-rich carbon nitride (C3N5) was successfully synthesized through the thermal polycondensation of 3-amino-1,2,4-triazole. The structural and physical characterization has suggested that a portion of the triazine rings, which constitute the structural framework of g-C3N4, may be substituted with five-membered rings in C3N5. Furthermore, the polymerization of C3N5 proceeded more extensively than that of g-C3N4 from melamine precursors. The increased nitrogen content in C3N5 resulted in a heightened number of π-electrons and a narrowed energy bandgap, with the potential of the valence band maximum being negatively shifted. Additionally, photocatalytic assessments encompassing nitro blue tetrazolium reduction, H2 production from triethanolamine aqueous solution, and CO2 reduction in the liquid phase were performed. All findings demonstrated that C3N5 exhibits significantly superior photocatalytic properties compared to g-C3N4. It is particularly noteworthy that C3N5 selectively generates methanol and H2 from oversaturated CO2 solutions under visible light irradiation, while g-C3N4 selectively generates formaldehyde. These outcomes strongly indicate that C3N5 serves as a metal-free, visible-light-responsive photocatalyst, capable of contributing to both the production of renewable energy sources and the reduction of greenhouse effect gases.

Fabricating BiOCl Nanoflake/FeOCl Nanospindle Heterostructures for Efficient Visible-Light Photocatalysis

Fabricating heterostructures with abundant interfaces and delicate nanoarchitectures is an attractive approach for optimizing photocatalysts. Herein, we report the facile synthesis of BiOCl nanoflake/FeOCl nanospindle heterostructures through a solution chemistry method at room temperature. Characterizations, including XRD, SEM, TEM, EDS, and XPS, were employed to investigate the synthesized materials. The results demonstrate that the in situ reaction between the Bi precursors and the surface Cl- of FeOCl enabled the bounded nucleation and growth of BiOCl on the surface of FeOCl nanospindles. Stable interfacial structures were established between BiOCl nanoflakes and FeOCl nanospindles using Cl- as the bridge. Regulating the Bi-to-Fe ratios allowed for the optimization of the BiOCl/FeOCl interface, thereby facilitating the separation of photogenerated carriers and accelerating the photocatalytic degradation of RhB. The BiOCl/FeOCl heterostructures with an optimal composition of 15% BiOCl exhibited ~90 times higher visible-light photocatalytic activity than FeOCl. Based on an analysis of the band structures and reactive oxygen species, we propose an S-scheme mechanism to elucidate the significantly enhanced photocatalytic performance observed in the BiOCl/FeOCl heterostructures.

Liquid exfoliation of bulk g-C3N5 to nanosheets for improved photocatalytic antibacterial activity

Liquid exfoliation of bulk g-C₃N₅ was applied to synthesize g-C₃N₅ nanosheets. In order to characterize the samples, X-ray powder diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), Fourier transform infrared spectra (FT-IR), X-ray photoelectron spectra (XPS), UV-Vis absorption spectra (UV-Vis), and photoluminescence spectra (PL) were examined. g-C₃N₅ nanosheets exhibited enhanced performance in the inactivation of Escherichia coli (E. coli) with visible light irradiation relative to bulk g-C₃N₅ and promoted complete inactivation of E. coli within 120 min. h⁺ and •O₂^- were the principal reactive species in the antibacterial process. In the early stages, SOD and CAT played a defensive role in resisting oxidative damage of active species. With the prolonged light exposure time, the antioxidant protection system was overwhelmed leading to the destruction of the cell membrane. The leakage of cell contents such as K⁺, protein, and DNA caused bacterial apoptosis ultimately. The enhanced photocatalytic antibacterial performance of g-C₃N₅ nanosheets is ascribed to the stronger redox property by the upward shift of CB and downward shift of VB compared with bulk g-C₃N₅. On the other hand, larger specific surface area and better separation efficiency of photoinduced carriers are helpful to the improved photocatalytic performance. This study systematically revealed the inactivation process toward E. coli and expanded the application range of g-C₃N₅-based materials with abundant solar energy.

Engineered g-C3N5-Based Nanomaterials for Photocatalytic Energy Conversion and Environmental Remediation

Photocatalysis plays a vital role in sustainable energy conversion and environmental remediation because of its economic, eco-friendly, and effective characteristics. Nitrogen-rich graphitic carbon nitride (g-C₃N₅) has received worldwide interest owing to its facile accessibility, metal-free nature, and appealing electronic band structure. This review summarizes the latest progress for g-C₃N₅-based photocatalysts in energy and environmental applications. It begins with the synthesis of pristine g-C₃N₅ materials with various topologies, followed by several engineering strategies for g-C₃N₅, such as elemental doping, defect engineering, and heterojunction creation. In addition, the applications in energy conversion (H₂ evolution, CO₂ reduction, and N₂ fixation) and environmental remediation (NO purification and aqueous pollutant degradation) are discussed. Finally, a summary and some inspiring perspectives on the challenges and possibilities of g-C₃N₅-based materials are presented. It is believed that this review will promote the development of emerging g-C₃N₅-based photocatalysts for more efficiency in energy conversion and environmental remediation.

Direct Z-Scheme g-C3N5/Cu3TiO4 Heterojunction Enhanced Photocatalytic Performance of Chromene-3-Carbonitriles Synthesis under Visible Light Irradiation

In order to make the synthesis of pharmaceutically active carbonitriles efficient, environmentally friendly, and sustainable, the method is regularly examined. Here, we introduce a brand-new, very effective Cu3TiO4/g-C3N5 photocatalyst for the production of compounds containing chromene-3-carbonitriles. The direct Z-Scheme photo-generated charge transfer mechanism used by the Cu3TiO4/g-C3N5 photocatalyst results in a suppressed rate of electron-hole pair recombination and an increase in photocatalytic activity. Experiments showed that the current method has some advantages, such as using an environmentally friendly and sustainable photocatalyst, having a simple procedure, quick reaction times, a good product yield (82–94%), and being able to reuse the photocatalyst multiple times in a row without noticeably decreasing its photocatalytic performance.