NiFe2O4/g-C3N4 heterostructure with an enhanced ability for photocatalytic degradation of tetracycline hydrochloride and antibacterial performance

Magnetic composite photocatalyst NiFe₂O₄/ZnIn₂S₄/biochar for efficient removal of antibiotics in water under visible light: Performance, mechanism and pathway

The widespread presence of antibiotics in aquatic environments, resulting from excessive use and accumulation, has raised significant concerns. A NiFe₂O₄/ZnIn₂S₄/Biochar (NFO/ZIS/BC) magnetic nanocomposite was successfully synthesized, demonstrating significantly enhanced electron-hole separation properties. Comprehensive investigations were conducted to evaluate the impact of various parameters, including catalyst mass, pH, and the presence of co-existing ions on the composite's performance. The nanoparticles of NiFe₂O₄ (NFO) and ZnIn₂S₄ (ZIS) were found to improve the surface stability and sulfamethoxazole removal capabilities of porous biochar, while also demonstrating high total organic carbon removal efficiencies. •O₂⁻ and h⁺ were identified as the predominant reactive oxygen species (ROS) in NFO/ZIS/BC-4 during the degradation process. The degradation outcomes of sulfamethoxazole under natural sunlight and water conditions were consistent with laboratory findings, affirming the robust applicative potential of NFO/ZIS/BC. Density functional theory (DFT) calculations were performed to elucidate the photocatalytic mechanism and identify potential intermediate products. Additionally, the types of heterojunctions present in the system were characterized and discussed. After multiple iterations, NFO/ZIS/BC-4 maintained effective photodegradation capabilities through five cycles. This study presents an effective method for the treatment of antibiotics in aquatic environments, offering significant potential for environmental applications.

Synthesis of a novel bismuth molybdite/iron oxide thin film for oxytetracycline degradation in a photoelectrocatalytic system

In this study, heterostructures based on Bismuth molybdite/iron oxide (Bi2MoO6/Fe2O3) thin films were fabricated by a dip-coating technique using precursor solutions. The heterostructures were deposited on fluorine-doped tin oxide glass substrates. From a detailed characterization using X-ray diffraction and X-ray photoelectron spectroscopy, the formation of the orthorhombic phase for Bi2MoO6 and the co-existence of hematite and maghemite in Fe2O3 was demonstrated. Meanwhile, the field emission scanning electron microscopy cross-section images confirm the formation of well-defined Bi2MoO6 film under the Fe2O3 deposition. The optical band gap energies for the heterostructure obtained were estimated from the diffuse reflectance spectra and ranged from 2.3 to 3.5 eV. Photoluminescence analysis revealed an improved separation and faster transfer of photogenerated electrons and holes for the Bi2MoO6/Fe2O3 (Het) film. The best oxytetracycline (OTC) removal percentage through photoelectrocatalytic treatment was 96.85% using the Het. Besides, were carried out the variation of parameters which affect the OTC photoelectrocatalytic degradation as pH, potential applied, and scavenger assay. The 1O2 was the oxidant predominate, which attack the OTC ring to initiate and accelerate the degradation process. Based on the analysis of degradation intermediates and characteristics of Bi2MoO6/Fe2O3, possible degradation pathways and mechanisms of OTC were displayed. An enhancement of oxytetracycline degradation efficiency of Het fabricated compared to pristine oxides was achieved mainly due to avoid the charge recombination of photogenerated electron-hole pairs provided by Direct Z-scheme heterostructure. Finally, the Het fabricated represents a promising material for efficient and sustainable pharmaceutical removal applications.

Emerging Roles of Graphitic Carbon Nitride-based Materials in Biomedical Applications

Graphite carbon nitride (g-C3N4) is a two-dimensional conjugated polymer with a unique energy band structure similar to graphene. Due to its outstanding analytical advantages, such as relatively small band gap (2.7 eV), low-cost synthesis, high thermal stability, excellent photocatalytic ability, and good biocompatibility, g-C3N4 has attracted the interest of researchers and industry, especially in the medical field. This paper summarizes the latest research on g-C3N4-based composites in various biomedical applications, including therapy, diagnostic imaging, biosensors, antibacterial, and wearable devices. In addition, the application prospects and possible challenges of g-C3N4 in nanomedicine are also discussed in detail. This review is expected to inspire emerging biomedical applications based on g-C3N4.

Charge transfer in TiO2-based photocatalysis: fundamental mechanisms to material strategies

Semiconductor-based photocatalysis has attracted significant interest due to its capacity to directly exploit solar energy and generate solar fuels, including water splitting, CO2 reduction, pollutant degradation, and bacterial inactivation. However, achieving the maximum efficiency in photocatalytic processes remains a challenge owing to the speedy recombination of electron-hole pairs and the limited use of light. Therefore, significant endeavours have been devoted to addressing these issues. Specifically, well-designed heterojunction photocatalysts have been demonstrated to exhibit enhanced photocatalytic activity through the physical distancing of electron-hole pairs generated during the photocatalytic process. In this review, we provide a systematic discussion ranging from fundamental mechanisms to material strategies, focusing on TiO2-based heterojunction photocatalysts. Current efforts are focused on developing heterojunction photocatalysts based on TiO2 for a variety of photocatalytic applications, and these projects are explained and assessed. Finally, we offer a concise summary of the main insights and challenges in the utilization of TiO2-based heterojunction photocatalysts for photocatalysis. We expect that this review will serve as a valuable resource to improve the efficiency of TiO2-based heterojunctions for energy generation and environmental remediation.

Low temperature in situ fabrication of NiFe2O4/tetragonal-BiVO4/Bi2MoO6 ternary heterostructure: A conjugated step-scheme multijunction photocatalyst with synergistic charge migration for antibiotic photodegradation and H2 generation

Rational design of novel conjugated step-scheme (S-scheme) multijunction heterostructure with synergistic charge channelization, superior light harvesting efficiency and strong redox ability is a pioneering approach to mimic natural photosynthesis process. Herein, a mild cetyltrimethyl ammoniumbromide (CTAB) assisted one pot reflux synthesis route is designed for in situ integration of metal organic framework (MOF)-derived NiFe2O4 with tetragonal-BiVO4 (t-BiVO4) and γ-Bi2MoO6 to prepare NiFe2O4/t-BiVO4/Bi2MoO6 (NFO/BVO/BMO) ternary composites. Morphologically, fine dispersion of NiFe2O4 (NFO) quantum dots over γ-Bi2MoO6 (BMO) and t-BiVO4 (BVO) nanoplates yielded three types of microscopic heterojunctions among BMO-BVO, BVO-NFO and BMO-NFO phases. The ternary composites displayed important physicochemical attributes including high surface area, strong optical absorption, superior charge mobility and higher excited state lifetime which accounted for its improved photocatalytic activity towards ciprofloxacin degradation (>99% in 90 min) and H2 evolution (1.11 mmolh-1g-1, photon conversion efficiency 18.5%). Kinetics study revealed 12-55 fold higher ciprofloxacin photodegradation activity and 31-41 times higher H2 evolution rate for the ternary composite in comparison to the pure semiconductors. A conjugated S-scheme charge transfer mechanism has been deduced from comprehensive band position analysis and radical trapping study to explain the enhanced photocatalytic activity. This work for the first time demonstrated the rational construction of conjugated S-scheme heterostructures with potential application in water remediation and green H2 production.

Construction of 2D/3D g-C3N4/BiOI Photocatalysts with p-n Heterojunction and Their Performance in Photocatalytic Degradation of Amaranth Dye

The g-C3N4 (graphitic carbon nitride)/BiOI (bismuth oxyiodide) photocatalysts, boasting a unique nanomicrosphere architecture, were synthesized through a tripartite process involving heat polycondensation, hydrothermal treatment, and hybrid methods, using melamine, bismuth nitrate, and potassium iodide as starting materials. The photocatalyst was comprehensively characterized and analyzed while its efficacy in photocatalytic degradation of amaranth (AR) under various lighting conditions was investigated, and the catalytic mechanism was determined by kinetic analysis and free radical scavenging experiments. The results showed that g-C3N4 formed a strong bond with BiOI. The resulting composite catalyst retains the inherent 2D lamellar structure of g-C3N4, as well as the 3D microsphere structure of BiOI, thereby creating heterojunctions via p-n interactions. Under visible light exposure, g-C3N4/BiOI-15% demonstrated optimal catalytic performance, achieving a degradation rate of 74.64% for AR and exhibiting the highest rate constant. Radical tests confirmed that -O2- (superoxide anion) plays a crucial role as active species in the photocatalytic reaction.

Constructing a novel type-Ⅱ ZnO/BiOCOOH heterojunction microspheres for the degradation of tetracycline and bacterial inactivation

A novel ZnO/BiOCOOH microsphere photocatalyst with a type-Ⅱ mechanism was developed for the first time. This strategy was accomplished by immobilizing ZnO onto 3D BiOCOOH microspheres via a single-step hydrothermal synthesis method. The ability to degrade tetracycline (TC) in water under visible light and inactivate bacteria of as-catalyst were analyzed. Among the prepared samples, the ZnO/BiOCOOH composite, with a mass ratio of 40%(Zn/Bi), exhibited the highest photocatalytic activity, which was able to degrade 98.22% of TC in just 90 min and completely eradicated Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus) in 48 h, and had potential application in solving water resource environmental pollution. The photoelectric characteristics of the photocatalysts were examined by means of electrochemical impedance spectroscopy (EIS) and photoluminescence (PL) spectroscopy. The findings indicated that the superior photocatalytic performance could be credited to the dissociation of electrons (e-) and holes (h+) in heterojunction composites. Finally, electron paramagnetic resonance (EPR) and capture experiments were conducted to confirm the photocatalytic mechanism of the type-Ⅱ heterojunction. This work provides a new Bi-base photocatalyst for aqueous environmental control.

Eminent destruction of organics and pathogens concomitant with power generation in a visible light-responsive photocatalytic fuel cell with NiFe2O4/ZnO pine tree-like photoanode and CuO/Cu2O nanorod cathode

Environmental conservation and energy scarcity have become two core challenges with the ever-increasing advancement of industry, particularly chemical energy rich wastewater comprising refractory organics and pathogenic microbes. Here, a multifunctional photocatalytic fuel cell (PFC) was devised using NiFe2O4 nanoparticle-loaded on pine tree-like ZnO/Zn (NiFe2O4/ZnO/Zn) photoanode and CuO/Cu2O nanorods-loaded on Cu (CuO/Cu2O/Cu) cathode for extracting electricity upon wastewater treatment. When fed with Rhodamine B (RhB) dyestuff, the NiFe2O4/ZnO/Zn-PFC provided the maximum power density (Pmax) of 0.539 mW cm-2 upon visible light irradiation with an average RhB degradation of 85.2%, which were 2.8 and 2.7 times higher than ZnO/Zn, respectively. The remarkable enhanced NiFe2O4/ZnO/Zn-PFC performance was owing to the synergistic effect of pine tree-like structure and Z-scheme heterostructure. The pine tree-like with high surface area was not only for effective harnessing photon energies but also provided more directional routes for rapid segregation and transport of carriers and higher interface contacting areas with electrolyte. Through a series of systematic characterizations, the Z-scheme heterostructure mechanism of the system and organics degradation pathway were also speculated. Additionally, the performance of the NiFe2O4/ZnO/Zn-PFC in industry printing wastewater showed Pmax of 0.600 mW cm-2, which was considerably impressive as real wastewater was challenging to accomplish. The phytotoxicity outcome also manifested that the comprehensive toxicity of RhB was eradicated after PFC treatment. Lastly, the excellent recyclability and the pronounced bactericidal effect towards Escherichia coli and Staphylococcus aureus were other attributions which enabled the NiFe2O4/ZnO/Zn-PFC for possible practical application.

An S-scheme NH2-MIL-101(Fe)@MCN/Bi2O3 heterojunction photocatalyst for the degradation of tetracycline and production of H2O2

Effective and durable photocatalysts are essential for the decomposition of persistent contaminants and the generation of hydrogen peroxide. In this study, we successfully constructed an S-type heterojunction by in situ growing Bi2O3 nanocrystals and NH2-MIL-101(Fe) onto surface-modified g-C3N4. The process of charge transfer in the S-type heterojunction was confirmed using ISI-XPS, DFT calculations, capture experiments, and EPR signals. The combined influence of the heterojunction and MOF demonstrated remarkable photocatalytic performance in the breakdown of tetracycline (TC) and the generation of hydrogen peroxide (H2O2). In the enhanced setup (10%-NH2-MIL-101(Fe)@MCN/Bi2O3), full degradation of TC was accomplished within 50 min under visible light exposure. Additionally, a notable H2O2 yield of 655.63 μmol/g was attained, all achieved without the necessity of sacrificial agents or supplementary oxygen. Based on the outcomes of the dual functionality, the exceptional performance of the ternary composite material can be ascribed to the collaborative influence of the heterojunction and MOF. This collaborative effect expands the light absorption range in the visible region, suppresses the recombination of electron-hole pairs, and enhances the photocatalytic redox ability. The system demonstrates significant potential in the efficient in situ production of H2O2 and removal of recalcitrant organic pollutants in pure water.

Titanium doped cobalt ferrite fabricated graphene oxide nanocomposite for efficient photocatalytic and antibacterial activities

Dyes and microbes are the main sources of water pollution and their treatment with titanium doped cobalt ferrite nanoparticles (CoTixFe2-xO4 NPs) is highly challenging due to the recombination ability of their electron-hole pairs which could be mitigated by making their composite with graphene oxide (GO). In the present study, titanium doped cobalt ferrite was fabricated on GO (CoTi0.2Fe1.8O4/GO NC) via the facile ultrasonication method and its confirmation was done by various analytical studies. Homogeneous dispersion of spherical CoTi0.2Fe1.8O4 NPs on the GO surface was realized by SEM analysis. Excellent crystallinity was corroborated by XRD while a Zeta Potential value -21.52 mV depicted exceptional stability. The photocatalytic power of CoTi0.2Fe1.8O/GO NC against Congo Red (CR) dye showed 91% degradation efficiency after 120 min visible light irradiation under optimum conditions of pH 9 and dye concentration 1 mg L-1 which was reasonably higher as compared to bare CoTi0.2Fe1.8O NPs (78% degradation efficiency). The improved photocatalytic performance is accredited to its narrow bandgap value (1.07 eV) and enhanced charge separation as indicated by the Tauc plot and Photoluminescence analysis, respectively. Additionally, CoTi0.2Fe1.8O/GO NC could be readily regenerated and reused five times with only ∼2% performance loss. Meanwhile, MICs of CoTi0.2Fe1.8O4/GO NC against P. aeruginosa and S. aureus were 0.046 and 0.093 mg mL-1 while MBCs were 0.093 and 0.187 mg mL-1, respectively. Thereby, optimized NC can open new avenues for the degradation of dyes from polluted water besides acting as a promising antimicrobial agent by rupturing the cell walls of pathogens.

Effects of Tea Polyphenols and Theaflavins on Three Oral Cariogenic Bacteria

In order to investigate the antibacterial mechanism of tea polyphenols and theaflavins against oral cariogenic bacteria, the pH value of the culture medium, the number of bacteria adhering to the smooth glass tube wall, and the electrical conductivity value within 10 h were measured, respectively. The effects of four concentrations of tea polyphenols and theaflavins below the MIC value were studied on acid production, adhesion, and electrical conductivity of oral cariogenic bacteria. The live/dead staining method was used to observe the effects of four concentrations of tea polyphenols and theaflavins below the MIC value on the biofilm formation of oral cariogenic bacteria under a laser scanning confocal microscope. With the increase in concentrations of tea polyphenols and theaflavins, the acid production and adhesion of the cariogenic bacteria gradually decreased, and the conductivity gradually increased. However, the conductivity increase was not significant (p < 0.05). Compared with the control group, the 1/2MIC and 1/4MIC tea polyphenols and theaflavins treatments significantly reduced the biomass of the cariogenic biofilm (p < 0.05). The confocal laser scanning microscope showed that the integrated optical density of green fluorescence of the cariogenic biofilm gradually decreased with the increase in agent concentration after the action of tea polyphenols and theaflavins.

Recent advances in luminescence and aptamer sensors based analytical determination, adsorptive removal, degradation of the tetracycline antibiotics, an overview and outlook

Tetracycline antibiotics (TCs), one of the important antibiotic groups, have been widely used in human and veterinary medicines. Their residues in foodstuff, soil and sewage have caused serious threats to food safety, ecological environment and human health. Here, we reviewed the potential harms of TCs residues to foodstuff, environment and human beings, discussed the luminescence and aptamer sensors based analytical determination, adsorptive removal, and degradation strategies of TCs residues from a recent 5-year period. The advantages and intrinsic limitations of these strategies have been compared and discussed, the potential challenges and opportunities in TCs residues degradation have also been deliberated and explored.

Type-1 α-Fe2O3/TiO2 photocatalytic degradation of tetracycline from wastewater using CCD-based RSM optimization

Antibiotic pollution in water is a growing threat to public health and the environment, leading to the spread of antimicrobial-resistant bacteria. While photocatalysis has emerged as a promising technology for removing antibiotics from water, its limited efficiency in the visible light range remains a challenge. In this study, we present a novel method for the photocatalytic degradation of tetracycline, the second most commonly used antibiotic worldwide, using α-Fe₂O₃/TiO₂ nanocomposites synthesized via rapid sonochemical and wet impregnation methods. The nanocomposites were characterised and tested using a range of techniques, including BET, TEM, FTIR, XRD, FESEM, EDS, and UV-Vis. The RSM-CCD method was also used to optimize the degradation process by varying four key variables (initial concentration, photocatalyst quantity, irradiation time, and pH). The resulting optimized conditions achieved a remarkable degradation rate of 97.5%. We also investigated the mechanism of photodegradation and the reusability of the photocatalysts, as well as the effect of light source operating conditions. Overall, the results demonstrate the effectiveness of the proposed approach in degrading tetracycline in water and suggest that it may be a promising, eco-friendly technology for the treatment of water contaminated with antibiotics.

One-pot synthesis of 2D Ag/BiOCl/Bi2O2CO3 S-scheme heterojunction with oxygen vacancy for photocatalytic disinfection of Fusarium graminearum in vitro and in vivo

2D Ag/BiOCl/Bi₂O₂CO₃ S-scheme heterojunction was prepared with oxygen vacancy (OVs) via one-pot hydrothermal method. The XRD and XPS analysis indicated the synthesized sample contained Ag nanoparticles (AgNPs) instead of Ag ions. The SEM and HRTEM pictures showed that BiOCl/Bi₂O₂CO₃ nanosheets were modified with AgNPs. Compared with AgNPs, BiOCl, and Bi₂O₂CO₃, Ag/BiOCl/Bi₂O₂CO₃ exhibited highly photocatalytic inactivation of pathogenic fungi (Fusarium graminearum) due to the wide light absorption range and S-scheme heterojunction structure, which improved the production and transfer of photogenerated carrier, and enhanced the separation of photogenerated e-/h⁺ pairs. In addition, the improved photocatalytic disinfection against Fusarium graminearum of Ag/BiOCl/Bi₂O₂CO₃ was verified in Sedeveria Letizia plant. Furthermore, active species capture assay and ESR experiments disclosed the involvement of OVs, h⁺, ∙O₂^-, ∙OH, and ^-for Fusarium graminearum destruction during photocatalysis process. The S-scheme heterojunction was proved via oxygen vacancy, which was extensively beneficial to increase charge transmission and separation efficiency. Our work proposed Ag/BiOCl/Bi₂O₂CO₃ was an efficient and ecological fungicide to inactive Fusarium graminearum in vitro and vivo for crop disease.

Designed Synthesis of PDI/BiOCl-BiPO4 Composited Material for Boosted Photocatalytic Contaminant Degradation

Enhancing the photocatalytic performance for contaminant degradation to accelerate the large-scale application of photocatalysis still is an enduring challenge. Herein, ternary PDI/BiOCl-BiPO4 composited materials with the different contents of PDI were designed and constructed by the multi-step compound method. The tetracycline hydrochloride and rhodamine B were chosen as targeted pollutants to investigate the photocatalytic performance of PDI/BiOCl-BiPO4 composited materials. The structure and component of BiOCl-BiPO4 and PDI/BiOCl-BiPO4 samples were detailedly characterized by a sequence of physical and chemical characterizations. The optimized PDI/BiOCl-BiPO4 sample, namely PDI(5%)/BiOCl-BiPO4, exhibited the excellent photocatalytic activity for tetracycline hydrochloride and rhodamine B degradation. The major active species that were holes (h+) and superoxide radicals (•O2−) also can be determined in the photocatalytic degradation process by active species trapping experiments. Furthermore, the photoelectrochemical and fluorescence measurements manifest the crucial role of PDI material. It can reduce the recombination of photo-excited charge carrier and improve the separation and transfer of photo-generated electron-hole pairs, which is beneficial to the photocatalytic reaction process. It is anticipated that our work would provide a counterpart to prepare the high-efficiency composited material in heterogeneous photocatalysis.

Recent advances in spinel ferrite-based magnetic photocatalysts for efficient degradation of organic pollutants

Although spinel ferrite (MFe₂O₄, M = Zn, Ni, Mn, etc.) has been reported as a promising catalyst, its low photocatalytic activity under visible light greatly restricts its practical application. Spinel ferrite-based photocatalytic composites have exhibited improved efficiency for pollutant degradation, due to interface charge carrier mobility and structural modification. Meanwhile, due to its magnetism and stability, spinel ferrite composite can be easily recycled for long-term utilization, showing its high application potential. In this review, the recent advances in the construction and photocatalytic degradation of spinel ferrite composites are discussed, with an emphasis on the relationship between structural property and photocatalytic activity. In addition, to improve their photocatalytic application, the challenges, gaps and future research prospects are proposed.

Photocatalytic Hydrogen Production and Tetracycline Degradation Using ZnIn2S4 Quantum Dots Modified g-C3N4 Composites

In this work, ZnIn₂S₄/g-C₃N₄ (ZIS/CN) composites were synthesized by in-situ growth method, which showed excellent photocatalytic activity in the degradation of tetracycline and hydrogen production from water under visible light irradiation. ZnIn₂S₄ quantum dots (ZIS QDs) tightly combined with sheet g-C₃N₄ (CN) to accelerate the separation and transportation of photogenerated charges for enhanced photocatalytic activity. Among the prepared nanocomposites, 20%ZnIn₂S₄ QDs/g-C₃N₄ (20%ZIS/CN) delivered the highest photocatalytic activity. After 120 min of irradiation, the degradation rate of tetracycline with 20%ZIS/CN was 54.82%, 3.1 times that of CN while the rate of hydrogen production was 75.2 μmol·g^-1·h^-1. According to the optical and electrochemical characterization analysis, it was concluded that the excellent photocatalytic activities of the composite materials were mainly due to the following three points: enhancement in light absorption capacity, acceleration in the charge transport, and reduction in the carrier recombination rate through the formation of S-scheme heterojunction in the composite system. The high photocatalytic activity of ZIS/CN composites provides a new idea to develop highly efficient photocatalysts.

Ultrasonic-assisted synthesis of porous S-doped carbon nitride ribbons for photocatalytic reduction of CO2

A series of porous S-doped carbon nitride ribbons (PSCN) were prepared by one-pot hydrothermal and sonochemical synthesis techniques. The morphologies and nanostructures of the catalysts were characterized by SEM, XRD and IR, which confirmed the pristine graphitic structures of carbon nitrides retained in the products. Due to sonication treatment, PSCN has porous structures in the thin ribbon and larger specific surface areas (PSCN 43.5 m²/g, SCN 26.6 m²/g and GCN 6.5 m²/g). XPS and elemental mappings verified that sulfur atoms were successfully introduced into the carbon nitride framework. Diffuse reflectance spectroscopy (DRS) results showed S-doping in the carbon nitride reduced the bandgap energy and enhanced their capability of the utilization of visible light, which contributed to higher photo-generated current. Photoluminescence (PL) analysis indicates the recombination of photogenerated carriers was suppressed in PSCN. Moreover, the photocatalytic performance showed that S-doping and porous and thin ribbon nanostructures may effectively boost the CO₂ reduction rate (to as much as 5.8 times of GCN) when illuminated byvisible light (>420 nm) without the need of sacrificial materials. The preliminary mechanisms of the formation of PSCN and its applications in photocatalytic CO₂ reduction are proposed. It highlights the potential of the current technique to produce effective, nonmetal-doped carbon nitride photocatalysts.

Photocatalytic degradation of tetracycline hydrochloride with g-C3N4/Ag/AgBr composites

Graphite carbon nitride (g-C₃N₄), as a polymer semiconductor photocatalyst, is widely used in the treatment of photocatalytic environmental pollution. In this work, a Z-scheme g-C₃N₄/Ag/AgBr heterojunction photocatalyst was prepared based on the preparation of a g-C₃N₄-based heterojunction via in-situ loading through photoreduction method. The g-C₃N₄/Ag/AgBr composite showed an excellent photocatalytic performance in the degradation of tetracycline hydrochloride pollutants. Among the prepared samples, g-C₃N₄/Ag/AgBr-8% showed the best photocatalytic ability for the degradation of tetracycline hydrochloride, whose photocatalytic degradation kinetic constant was 0.02764 min^-1, which was 9.8 times that of g-C₃N₄, 2.4 times that of AgBr, and 1.9 times that of Ag/AgBr. In the photocatalytic process, ^•O^2- and ^•OH are main active oxygen species involved in the degradation of organic pollutants. The photocatalytic mechanism of g-C₃N₄/Ag/AgBr is mainly through the formation of Z-scheme heterojunctions, which not only effectively improves the separation efficiency of photogenerated electron-hole pairs, but also maintains the oxidation and reduction capability of AgBr and g-C₃N₄, respectively.

Graphitic carbon nitride (g-C3N4)-based photocatalytic materials for hydrogen evolution

The semiconductors, such as TiO₂, CdS, ZnO, BiVO₄, graphene, produce good applications in photocatalytic water splitting for hydrogen production, and great progress have been made in the synthesis and modification of the materials. As a two-dimensional layered structure material, graphitic carbon nitride (g-C₃N₄), with the unique properties of high thermostability and chemical inertness, excellent semiconductive ability, affords good potential in photocatalytic hydrogen evolution. However, the related low efficiency of g-C₃N₄ with fast recombination rate of photogenerated charge carriers, limited visible-light absorption, and low surface area of prepared bulk g-C₃N₄, has called out the challenge issues to synthesize and modify novel g-C₃N₄-block photocatalyst. In this review, we have summarized several strategies to improve the photocatalytic performance of pristine g-C₃N₄ such as pH, morphology control, doping with metal or non-metal elements, metal deposition, constructing a heterojunction or homojunction, dye-sensitization, and so forth. The performances for photocatalytic hydrogen evolution and possible development of g-C₃N₄ materials are shared with the researchers interested in the relevant fields hereinto.

Effect of nanodiamond particles on the structure, mechanical, and thermal properties of polymer embedded ND/PMMA composites

Nanodiamonds (NDs), the allotropic carbon nanomaterials with nanosize, durable inert core, adjustable surface morphology, high thermal constancy, and super mechanical performances, possess the characteristics of promising reinforcement materials for various technological applications. However, ND particles hold a vigorous propensity to aggregate in liquid media, obstructing their implementation in mechanical and thermal sciences. This aggregation is caused by high surface to volume ratio. By reducing the surface energy and lowering cluster formation, the mechanical and thermal properties of NDs can be polished. Herein, we report on the covalent functionalization of NDs with amine moiety through ball milling method. Their dispersion was checked in ethanol and polymethyl methacrylate (PMMA polymer) against nonfunctionalized NDs. The dispersive behavior showed that ball mill functionalized NDs produced preferably stable aqueous dispersions in ethanol media. Furthermore, 0.1, 0.2, and 0.4 wt% ND/PMMA composites were synthesized, and their mechanical and thermal behaviors were studied in terms of hardness, compression, Young`s modulus, flexural strength, tensile strength, and thermogravimetric analysis (TGA). Results revealed that the composites containing 0.2 wt% functionalized ND loaded with PMMA matrix showed outstanding mechanical and thermal performances indicating that 0.2 wt% is the optimum amount for achieving excellent outcomes.

Preparation and comparative evaluation of PVC/PbO and PVC/PbO/graphite based conductive nanocomposites

Two series, A and B, of PVC based nanocomposite polymer membranes (nCPMs) were prepared using PbO only and PbO/graphite mixture as a filler by solution casting method. Seven samples with varying compositions (5–35%) of filler particles were prepared for each series and were compared by thickness measurements, porosity, water uptake, swelling degree, ionic conductivity, ion exchange capacity (IEC), membrane potential and transport number. The maximum values for these characteristics were observed as 0.402 mm, 0.77, 141.3%, 0.11, 0.0033 Scm−1, 8.6 milli-eq.g−1, 0.19 V and 0.01391 for series-A composites whereas that of 0.367 mm, 0.83, 63.4%, 0.019, 0.00981 Scm−1, 5.21 milli-eq.g−1, 0.13 V and 0.0108 for series-B nCPMs respectively. The SEM images of membranes showed greater voids produced in the series-B compared to series-A composites. The maximum Ionic conductivity, IEC, membrane potential and transport number were observed for membrane with 25% PbO/graphite, 20% PbO and 35% PbO particles respectively.