3D printing titanium dioxide-acrylonitrile-butadiene-styrene (TiO2-ABS) composite membrane for efficient oil/water separation

An efficient solution based on the synergistic effects of nickel foam in NiFe-LDH nanosheets for oil/water separation

Efficient oil-water separation has always been a research hotspot in the field of environmental studies. Employing a one-step hydrothermal approach, NiFe-layered double hydroxides (LDH) nanosheets were synthesized on nickel foam substrates. The resulting NiFe-LDH/NF membrane exhibited rejection rates exceeding 99% across six diverse oil-water mixtures, concurrently demonstrating a remarkable ultra-high flux of 1.4 × 106 L·m-2·h-1. This flux value significantly surpasses those documented in existing literature, maintaining stable performance over 1000 manual filtration cycles. These breakthroughs stem from the synergistic interplay among the three-dimensional channels of the nickel foam, the nanosheets, and the hydration layer. By leveraging the pore size of the foam to enhance the functionality of the hydration layer, the conventional trade-off between permeability and selectivity was transformed into a balanced force relationship between the hydration layer and the oil phase. The operational and failure mechanisms of the hydration layer were examined using the prepared NiFe-LDH/NF membrane, validating the correlation between oil phase viscosity and density with hydration layer rupture. Additionally, an extended Derjaguin-Landau-Verwey-Overbeek (XDLVO) theory was employed to investigate changes in interaction energy, further reinforcing the study's findings. This research contributes novel insights and assistance to the comprehension and application of hydration layers in other membrane studies dedicated to oil-water separation.

Revealing the contradiction between DLVO/XDLVO theory and membrane fouling propensity for oil-in-water emulsion separation

Oil fouling is the crucial issue for the separation of oil-in-water emulsion by membrane technology. The latest research found that the membrane fouling rate was opposite to the widely used theoretical prediction by Derjaguin-Landau-Verwey-Overbeek (DLVO) or extended DLVO (XDLVO) theory. To interpret the contradiction, the molecular dynamics was adopted to explore the molecular behavior of oil and emulsifier (Tween 80) at membrane interface with the assistance of DLVO/XDLVO theory and membrane fouling models. The decreased flux attenuation and fitting of fouling models proved that the existence of Tween 80 effectively alleviated membrane fouling. Conversely, DLVO/XDLVO theory predicted that the membrane fouling should be exacerbated with the increase of Tween 80 concentration in O/W emulsion. This contradiction originated from the different interaction energy between oil/Tween 80 molecules and polyether sulfone (PES) membrane. The favorable free energy of Tween 80 was resulted from the sulfuryl groups in PES and hydrogen bonds (O-H…O) formation further strengthened the interaction. Therefore, Tween 80 could preferentially adsorb on membrane surface and form an isolation layer by demulsification and steric hindrance and resist the aggregation of oil, which effectively alleviated membrane fouling. This study provided a new insight in the interpretation of interaction in O/W emulsion.

The Design of PAN-Based Janus Membrane with Adjustable Asymmetric Wettability in Wastewater Purification

In this paper, an environmentally friendly polyacrylonitrile-based (PAN-based) composite membrane with a Janus structure for wastewater treatment was successfully fabricated. To achieve the optimum adsorption of PAN-based Janus composite membrane, the asymmetric wettability was regulated through electrospinning, resulting in TiO2 modifying PAN as the hydrophilic substrate layer, and PCL gaining a different thickness as the hydrophobic layer. The prepared Janus composite membrane (PAN/TiO2-PCL20) showed excellent oil/water separation performance for diverse surfactant-stabilized oil-in-water emulsions. For n-hexane-in-water emulsion, the permeate flux and separation efficiency reached 1344 L m-2 h-1 and 99.52%, respectively. Even after 20 cycles of separation, it still had outstanding reusability and the separation efficiency remained above 99.15%. Meanwhile, the PAN/TiO2-PCL20 also exhibited an excellent photocatalytic activity, and the removal rate for RhB reached 93.2%. In addition, the research revealed that PAN/TiO2-PCL20 possessed good mechanical property and unidirectional water transfer capability. All results indicated that PAN/TiO2-PCL20 with photocatalysis and oil/water separation performance could be used for practical complex wastewater purification.

Effectiveness of different CuO morphologies nanomaterials on the permeability, antifouling, and mechanical properties of PVDF/PVP/CuO ultrafiltration membrane for water treatment

The hydrophobic nature of Poly (vinylidene fluoride) (PVDF) is a significant barrier to use in ultrafiltration, resulting in fouling, flux decline, and reduced lifespan in water treatment. This study examines the effectiveness of different morphologies of CuO nanomaterials (NMs) (spherical, rod, plate, and flower), synthesized by the facile hydrothermal method, to modify PVDF membrane with PVP additive for improving the performance of water permeability and antifouling. Such membrane configurations with different morphologies of CuO NMs improved hydrophilicity with a maximum water flux of 222-263 L m-2h-1 compared to 195 L m-2h-1 for the bare membrane and exhibited excellent thermal and mechanical strengths. The characterization results exhibited that plate-like CuO NMs were dispersed uniformly in the membrane matrix, and their incorporation as a composite improved the membrane properties. From the antifouling test with the bovine serum albumin (BSA) solution, the membrane with plate-like CuO NMs had the highest flux recovery ratio (FRR) (∼91%) and the lowest irreversible fouling ratio (∼10%). The antifouling enhancement was due to less interaction between modified membranes and foulant. Further, the nanocomposite membrane showed excellent stability and negligible Cu2+ ion leaching. Overall, our findings provide a new strategy for developing inorganic nanocomposite PVDF membranes for water treatment.

Elimination of tetracyclines in seawater by laccase-mediator system

Long-term exposure of antibiotics at low level leads to the accumulation of antibiotics in environmental media and organisms, inducing the formation of antibiotic resistance genes. Seawater is an important sink for many contaminants. Here, laccase from Aspergillus sp. And mediators that follow different oxidation mechanisms were combined to degrade tetracyclines (TCs) at environmentally relevant levels (ng·L^-1-μg·L^-1) in coastal seawater. The high salinity and alkaline of seawater changed the enzymatic structure of laccase, resulting in a reduced affinity of laccase to the substrate in seawater (K_m of 0.0556 mmol L^-1) than that in buffer (K_m of 0.0181 mmol L^-1). Although the stability and activity of the laccase decreased in seawater, laccase at a concentration of 200 U·L^-1 with a laccase/syringaldehyde (SA) ratio of 1 U: 1 μmol could completely degrade TCs in seawater at initial concentrations of less than 2 μg L^-1 in 2 h. Molecular docking simulation showed that the interaction between TCs and laccase mainly includes hydrogen bond interaction and hydrophobic interaction. TCs were degraded into small molecular products through a series of reactions: demethylation, deamination, deamidation, dehydration, hydroxylation, oxidation, and ring-opening. Prediction of the toxicity of intermediates showed that the majority of TCs can be degraded into low-toxic or non-toxic, small-molecule products within 1 h, indicating that the degradation process of TCs by a laccase-SA system has good ecological safety. The successful removal of TCs by the laccase-SA system demonstrates its potential for the elimination of pollutants in marine environment.

PO6 geometric configuration unit enhanced electrocatalytic performance of Co3O4 in acidic oxygen evolution

It is challenging to develop high-efficient and stable nonprecious metal-based electrocatalyst for oxygen evolution reaction (OER) in acid for proton exchange membrane (PEM) water splitting. Herein, P atoms were introduced into the lattice of spinel Co₃O₄ (P-Co₃O₄) to replace with octahedral coordinated Co³⁺ via a hydrothermal process following a thermal treatment. The formation of PO₆ geometric configuration unit in Co₃O₄ can trigger electron rearrangement around Co ions, which resulted in the high-active Co²⁺ site on the surface, significantly decreasing the energy barrier of rate-determining step for OER. Moreover, the weaker covalency of the Co 3d-O 2p bond and higher formation energy of oxygen vacancy around Co²⁺ in P-Co₃O₄ inhibited the participation of lattice oxygen during OER process, enabling that P-Co₃O₄ can work stably in acidic media. The obtained P-Co₃O₄ afforded satisfying stability over 30 h in a PEM electrolysis device with an overpotential of 400 mV@10 mA/cm² in 0.1 M HClO₄.