Type-1 α-Fe2O3/TiO2 photocatalytic degradation of tetracycline from wastewater using CCD-based RSM optimization

MXene-based composite photocatalysts for efficient degradation of antibiotics in wastewater

MXene-based (nano)materials have recently emerged as promising solutions for antibiotic photodegradation from aquatic environments, yet they are limited by scalability, stability, and selectivity challenges in practical settings. We formulated Fe2O3-SiO2/MXene ternary nano-photocomposites via coupled wet impregnation and sonochemistry approach for optimised tetracycline (TC) removal (the second most used antibiotic worldwide) from water using response surface methodology-central composite design (RSM-CCD). The photocatalysts containing various loading of Fe2O3/SiO2 (5-45 wt%) on the MXene with a range of calcination temperatures (300-600 °C) via RSM optimisation were synthesised, characterised regarding crystallinity properties, surface morphology, binding energy, and light absorption capability, and analysed for TC degradation efficiency. The 25FeS/MX-450 composite among all samples demonstrated a superior efficiency in TC photocatalytic removal (98%) under optimised conditions (TC degradation: 39.75 mg/L, time: 68.28 min, pH: 5.57, catalyst dosage: 0.75 g/L). The developed surface area, with a reduced band gap due to FeS nanoparticles incorporation with improved light absorption within the visible spectrum, played a crucial role in the 25FeS/MX-450 heterostructure matrix, enhancing photogenerated carriers' separation and transportation capabilities. The tetracycline photoreduction mechanism involved electron transfer from FeS to the surface of MXene, engaging with O2 to produce •O2-, attributed to the high electron mobility of MXene. Our findings for such nano-photocomposites materials can underscore the considerable potential of MXene-based nanomaterials for pharmaceutical removal from waterways.

MOF biochar composites for environmental protection and pollution control

Research studies on Metal Organic Frameworks (MOF) based composites and their potential applications in environmental engineering and pollution control have recently emerged. An attractive material to form MOF composites is biochar (BC); a low-cost, highly porous carbonaceous by-product of biomass pyrolysis. This paper presents a critical review on MOF-biochar composites, focusing on fabrication, characterisation, modification, and applications in environmental protection and pollution control. The adsorption mechanisms and influential parameters are systematically examined to develop an insight into interactions between MOF and biochar in remedial process. The adsorption capacity of composites is generally doubled compared to the standalone biochar, while MOFs maintain their crystallinity, even over multiple regeneration cycles, indicating the composites' long-term applicability and sustainability. These findings highlight the potential of MOF-biochar composites for environmental applications and identify key areas for further research to enhance their sustainability in environmental protection and green energy.

Optimizing Titanium Carbide-Silver Oxide Nanostructures for Targeted Cancer Therapy: Synthesis, Functionalization, and In Vitro Evaluations

Introduction  Cancer remains a significant health challenge, and nanoparticles (NPs) are promising candidates for cancer treatment due to their unique physicochemical properties and ability to selectively target tumour cells. Two-dimensional (2D) nanomaterials, such as MXenes, have attracted interest due to their electronic structures, optical properties, catalytic abilities, and exceptional physicochemical attributes. MXenes are highly suitable for surface functionalization or modification, and their unique properties make them promising candidates for various applications in the biological field. Silver-based compounds have shown remarkable potential in biomedical fields, with silver oxide (Ag₂O) NPs finding applications in various domains. The fabrication of titanium carbide (Ti₃C₂)-Ag₂O heterostructures has been investigated for their anti-cancer properties by conducting cell viability assays on different cell lines. Aim To synthesize and characterize Ti₃C₂-Ag₂O, and to assess its in vitro anti-cancer activity. Materials and methods Ti₃C₂ synthesis begins by dissolving Ti₃AlC₂ powder in a 50% v/v hydrofluoric (HF) acid solution, allowing the aluminium to be etched away. This process should be conducted with continuous stirring for 24 to 48 hours at ambient temperature. Following this, filter the resulting suspension to eliminate aluminium particles and HF, and subsequently wash the Ti₃C₂ MXene with distilled water until a neutral pH is attained. The MXene should then be dispersed in ethanol, and sonication in deionized (DI) water or an alternative solvent should be employed to achieve exfoliation into monolayer or few-layer MXenes. To prepare Ag₂O NPs, dissolve silver nitrate (AgNO₃) in DI water to create a 0.1 M solution, and concurrently prepare a separate 0.1 M sodium hydroxide (NaOH) solution. Introduce the NaOH solution to the AgNO₃ while stirring until a precipitate is observed. The mixture should then be filtered, washed with distilled water, and the NPs dried at 60°C for 12 hours. To fabricate the MXene-Ag₂O composite, disperse the MXene nanoflakes in a solvent through sonication, incorporate the Ag₂O NPs, and stir the mixture for 24 hours. Finally, centrifuge the resultant mixture to isolate the composite, wash it with solvent, and dry it under vacuum conditions. Results The presence of Ag₂O particles on Ti₃C₂ nanosheets was observed, and the high crystallinity of the compound was confirmed through X-ray diffraction (XRD), energy-dispersive spectroscopy (EDS), and scanning electron microscopy (SEM) analyses. These tests verified that the compound was free of impurities and exhibited anti-cancer properties. Conclusion  The synthesis of Ti₃C₂ MXenes and Ag₂O NPs was achieved and confirmed through structural characterization methods, including SEM, XRD, and EDS. SEM provided detailed insights into the morphology and distribution of the nanostructures, while XRD and EDS verified their phase purity and elemental composition. Functionalization strategies were employed to enhance the stability and bioactivity of the nanocomposites. In vitro evaluations demonstrated promising anti-cancer activity, indicating that the Ti₃C₂-Ag₂O composites effectively target and inhibit cancer cell growth.

Optimization of cerium-based metal-organic framework synthesis for maximal sonophotocatalytic tetracycline degradation

Wastewater treatment is inevitably required to alleviate the pollution of water resources by various contaminants such as antibiotics. MOFs are novel materials with photocatalytic activities. In this study, sonophotocatalytic degradation of tetracycline (TC) by the Cerium-based MOF (Ce-MOF) is optimized by modification of its synthesis route. Ce-MOF synthesis by room temperature (RT), hydrothermal (HT), and sonochemical synthesis (SC) are studied. TC degradation experiments revealed the superiority of SC synthesis. The interplay of main synthesis parameters, namely, initial ligand concentration, ultrasound (US) power and time on sonophotocatalytic activity of Ce-MOF, were investigated by response surface methodology model (RSM) utilizing the central composite experimental design (CCD). The optimum SC synthesis conditions are an initial ligand concentration of 8.4 mmol/L, a sonication power of 50 amplitude, and a US time of 60 min. The optimally synthesized Ce-MOF was characterized by infrared spectroscopy, FTIR, XRD, FE-SEM, TEM, zeta potential analysis, diffuse reflectance spectroscopy, particle size analysis, Mott-Schottky analysis, photocurrent analysis, electrochemical impedance spectra, and photoluminescence spectroscopy. The findings indicate that the removal efficiency of TC can reach up to 81.75% within 120 min in an aqueous solution containing an initial TC concentration of 120 ppm and 1 g/L Ce-MOF at pH of 7. Mineralization efficiency of the process is 71% according to COD measurements. The Ce-MOF catalyst retained its chemical stability and remained active upon TC degradation which makes it a promising candidate for wastewater treatment.

Electric field driven tourmaline/hematite dual mineral photocatalysis for efficient antibiotic removal

Hematite (Fe2O3) has garnered attention due to its stability, economic viability, and non-toxic nature. However, the rapid recombination of charge carriers hampers its practical application. On the other hand, tourmaline's inherent surface electric field facilitates the rapid separation of photogenerated electrons and holes. In this study, two directly mined natural minerals, tourmaline and hematite (TFO), were successfully combined. Characterization and experiments indicate that the pronounced enhancement of photocatalytic activity in Fe2O3 is attributed to the electric field effect on the surface of tourmaline. TFO successfully removes 93% of tetracycline (TC, 50 ppm) within 60 min. The reaction rate constant for TFO composite material (0.0410 min-1) is 8.5 times that of tourmaline (0.0048 min-1) and 14.1 times that of hematite (0.0029 min-1). Simultaneously, it markedly improves light absorption and charge carrier separation capabilities. Through simulations of various natural environmental factors, TFO demonstrates excellent practicality. Analyzing and detecting active species revealed the involvement of four types of active species, with ·OH radicals making the most significant contribution. The photocatalytic mechanism was proposed. Furthermore, the degradation pathway of tetracycline and the toxicity of its metabolites were investigated. This work provides additional inspirations and insights for photocatalytic materials performance enhancement and natural resources green governance environment.

A novel nanocomposite for photocatalytic rhodamine B dye removal from wastewater using visible light

Providing safe access to water and addressing the impact of waterborne diseases, which claim over two million lives annually, is a major contribution to water purification. The study introduces a novel nanocomposite, Ch/Fe3O4/α-MoO3, which exhibits outstanding photocatalytic efficacy under visible light. An in-depth investigation of the nanocomposite's synthesis, characterization, and photodegradation mechanisms reveals its outstanding capabilities. Photocatalytic activity is influenced by the catalytic dose, pH, dye concentration, and reaction time, according to the study. A response surface method is used to determine the optimal conditions for Rhodamine B degradation, which results in 96.3% removal efficiency at pH 8.5, dye concentration 25 mg/L, nanocomposite dose at 22 mg/L, and reaction time 50 min. As a result of its high surface area, biocompatibility, availability, and magnetization with iron compounds, Chitosan is an excellent substrate for enhancing the photocatalytic properties of MoO3 nanoparticles. A nanocomposite with an energy band of 3.18 eV exhibits improved visible light absorption. This study confirms the nanocomposite's recyclability and stability, affirming its practicality. Besides dye removal, it offers hope for the global quest for clean water sources by addressing a broader range of waterborne contaminants. By combining molybdenum and magnetite, nanocomposite materials facilitate the degradation of pollutant and bacteria, contributing positively to society's quest for clean and safe water. It emphasizes the role nanotechnology plays in preserving human health and well-being in combating waterborne diseases.

Decoration of Carbon Dots on Oxygen-Vacancy-Enriched S-Scheme TiO2 Quantum Dots/TiO2 Oxygen Vacancies Photocatalysts: Impressive Quantum-Dot-Sized Photocatalysts for Remediation of Antibiotics, Bacteria, and Dyes

Today, cleaning the environment using photocatalytic technology is one of the main research activities. In this study, carbon dots (C-dots) were anchored on oxygen-vacancy-enriched TiO2 quantum dots (QDs)/TiO2 oxygen vacancies (OVs) using a facile procedure. The resultant ternary TiO2 QDs/TiO2 OVs/C-dots photocatalysts with a quantum dot size of almost 4.55 nm were used for detoxification of aqueous solutions containing four antibiotics and three organic dyes as well as inactivation of two pathogenic bacteria, including Escherichia coli and Staphylococcus aureus, upon visible light. The degradation constant of tetracycline over the optimized TiO2 QDs/TiO2 OVs/C-dots nanocomposite reached 714 × 10-4 min-1, which was 17.3, 12.1, and 2.92 times higher than TiO2 QDs, TiO2 OVs, and TQDs/TOVs (1:1) materials, respectively. Effective separation of electron-hole pairs between TiO2 QDs and TiO2 OVs counterparts through decorated C-dots by an established S-scheme system was the main reason for boosted photocatalytic activity. With regard to the facile growth of wheat and lentil seeds in the treated solutions, it is hoped that the TiO2 QDs/TiO2 OVs/C-dots nanocomposite with significant stability could be used to clean up wastewaters.

Tetracycline removal from wastewater via g-C3N4 loaded RSM-CCD-optimised hybrid photocatalytic membrane reactor

In this study, a split-type photocatalytic membrane reactor (PMR), incorporating suspended graphitic carbon nitride (g-C3N4) as photocatalyst and a layered polymeric composite (using polyamide, polyethersulfone and polysulfone polymers) as a membrane was fabricated to remove tetracycline (TC) from aqueous solutions as the world's second most used and discharged antibiotic in wastewater. The photocatalyst was synthesised from melamine by ultrasonic-assisted thermal polymerisation method and, along with the membrane, was characterised using various methods, including Brunauer-Emmett-Teller analysis (BET), Fourier-transform infrared spectroscopy (FTIR), X-ray diffraction analysis (XRD), Field emission scanning electron microscopy (FESEM), and Ultraviolet-visible spectroscopy (UV-Vis). The PMR process was optimised, using Design-Expert software for tetracycline removal in terms of UV irradiation time, pH, photocatalyst loading, tetracycline concentration, and membrane separation iteration. It was revealed that a membrane-integrated reactor as a sustainable system could effectively produce clean water by simultaneous removal of tetracycline and photocatalyst from aqueous solution. The maximum removal of 94.8% was obtained at the tetracycline concentration of 22.16 ppm, pH of 9.78 with 0.56 g/L of photocatalyst in the irradiation time of 113.77 min after six times of passing membrane. The PMR system showed reasonable reusability by about a 25.8% drop in TC removal efficiency after seven cycles at optimal conditions. The outcomes demonstrate the promising performance of the proposed PMR system in tetracycline removal from water and suggest that it can be scaled as an effective approach for a sustainable supply of antibiotic-free clean water.

Enhancing sodium percarbonate catalytic wet peroxide oxidation with artificial intelligence-optimized swirl flow: Ni single atom sites on carbon nanotubes for improved reactivity and silicon resistance

H2O2 is widely used in the treatment of refractory organic pollutants.However, due to its explosive and corrosive chemical characteristics, H2O2 will bring great safety risks and troubles in transportation.So we chose sodium percarbonate(SPC) to be used in catalytic wet peroxide oxidation enhanced by swirl flow(SF-CWPO) and we designed carbon nanotubes with Ni single atom sites(Ni-NCNTs/AC) to activate SPC to treat an m-cresol wastewater containing Si.Meanwhile, artificial intelligence which used Artificial neural network (ANN) was used to optimize the conditions.Under the conditions of pH = 9.27, reaction time of 8.91 min, m-cresol concentration is 59.09 mg L-1, SPC dosage is 2.80 g L-1 and Na2SiO3·9H2O dosage is 77.27 mg L-1, the degradation rate of total organic carbon(TOC) and m-cresol reaches 94.37% and 100%, respectively.Finally, the applicability of Ni-NCNTs/AC-SPC-SF-CWPO technology was evaluated in a wastewater system of a sewage treatment enterprise and Fourier transform ion cyclotron resonance mass spectrum(FT-ICR MS) analysis and chemical oxygen demand(COD) analysis showed the great ability of Ni-NCNTs/AC-SPC-SF-CWPO technology to treat wastewater.It is believed that this paper is of great significance to the design and construction of the in-depth research and industrial application of SF-CWPO.