Facile synthesis of WO3 micro/nanostructures by paper-assisted calcination for visible-light-driven photocatalysis

Simultaneously Improved Activity and Stability for Acidic Water Oxidation of IrRu Oxides by a Dual Role of Tungsten Doping

Acidic oxygen evolution reaction (OER) remains a significant challenge due to the low activity and/or poor stability of the catalysts, even with state-of-the-art catalysts such as IrO2 and RuO2. Herein, we propose a strategy to enhance both the catalytic activity and stability of IrRu oxides for acidic OER by doping non-noble metal W. The W-doped IrRu3Ox (W-IrRu3Ox) undergoes a process of W leaching and reconstruction during the OER, leading to a more uniform distribution of elements, while the electronegative nature of W influences the electronic structures of Ir and Ru in W-IrRu3Ox. The dual role of W in promoting the formation of active site Ir5+ and inhibiting the concentration of soluble Ru>4+ ions results in a synergistic enhancement of both the activity and stability of acidic OER. Remarkably, W-IrRu3Ox exhibits outstanding catalytic activity for the OER in 0.5 M H2SO4, with a high stability of more than 500 h. This work presents a novel and feasible strategy for the development of efficient and stable catalysts for acid OER, shedding light on the design of advanced electrocatalysts for energy conversion and storage applications.

Controlled Growth of WO3 Photoanode under Various pH Conditions for Efficient Photoelectrochemical Performance

Herein, the effects of the precursor solution's acidity level on the crystal structure, morphology, nucleation, and growth of WO3·nH2O and WO3 nanostructures are reported. Structural investigations on WO3·nH2O using X-ray diffraction and Fourier-transform infrared spectroscopy confirm that the quantity of hydrate groups increases due to the interaction between H+ and water molecules with increasing HCl volume. Surface analysis results support our claim that the evolution of grain size, surface roughness, and growth direction on WO3·nH2O and WO3 nanostructures rely on the precursor solution's pH value. Consequently, the photocurrent density of a WO3 photoanode using a HCl-5 mL sample achieves the best results with 0.9 mA/cm2 at 1.23 V vs. a reversible hydrogen electrode (RHE). We suggest that the improved photocurrent density of the HCl-5 mL sample is due to the efficient light absorption from the densely grown WO3 nanoplates on a substrate and that its excellent charge transport kinetics originate from the large surface area, low charge transfer resistance, and fast ion diffusion through the photoanode/electrolyte interface.

Review of Recent Developments in the Fabrication of ZnO/CdS Heterostructure Photocatalysts for Degradation of Organic Pollutants and Hydrogen Production

Researchers have recently paid a lot of attention to semiconductor photocatalysts, especially ZnO-based heterostructures. Due to its availability, robustness, and biocompatibility, ZnO is a widely researched material in the fields of photocatalysis and energy storage. It is also environmentally beneficial. However, the wide bandgap energy and quick recombination of the photoinduced electron-hole pairs of ZnO limit its practical utility. To address these issues, many techniques have been used, such as the doping of metal ions and the creation of binary or ternary composites. Recent studies showed that ZnO/CdS heterostructures outperformed bare ZnO and CdS nanostructures in terms of photocatalytic performance when exposed to visible light. This review largely concentrated on the ZnO/CdS heterostructure production process and its possible applications including the degradation of organic pollutants and hydrogen evaluation. The importance of synthesis techniques such as bandgap engineering and controlled morphology was highlighted. In addition, the prospective uses of ZnO/CdS heterostructures in the realm of photocatalysis and the conceivable photodegradation mechanism were examined. Lastly, ZnO/CdS heterostructures' challenges and prospects for the future have been discussed.

Properties, optimized morphologies, and advanced strategies for photocatalytic applications of WO3 based photocatalysts

The development of WO₃ based photocatalysts has gained considerable attention across the world, especially in the realm of environmental remediation and energy production. WO₃ has a band gap of 2.5- 2.7 eV that falls under the visible region and is thus a potential candidate to utilize in various photocatalytic processes. As an earth-abundant metal oxide, WO₃ discovered in 1976 displayed excellent electronic and morphological properties, good stability, and enhanced photoactivity with diverse crystal phases. Also, it unveils non-toxicity, high stability in drastic conditions, biocompatibility, low cost, excellent hole mobility (10 cm² V^-1s^-1), and tunable band gap. This review provides a comprehensive overview of the different properties of WO₃ inclusive of crystallographic, electrical, optical, thermoelectrical, and ferroelectric properties. The different morphologies of WO₃ based on dimensions were obtained by adopting different fabrication methods including inspecting their effects on the efficiency of WO₃. Numerous strategies to construct an ideal photocatalyst such as engineering crystal facets, surface defects, doping, heterojunction formation explaining specifically type-II, Z-scheme, and S-scheme mechanisms with addition to carbonaceous based WO₃ nanocomposites are summed up to explore the photocatalytic performance. The typical application of WO₃ is deliberated in detail involving the role and efficiency of WO₃ in pollutant degradation, CO₂ photoreduction, and water splitting. Besides, other applications of WO₃ as gas-sensor, bio-sensor, decomposition of VOCs, heavy metals ions adsorption, and antimicrobial property are also included. Moreover, the numerous aspects responsible for the high efficiency of WO₃-based nanocomposites with their challenges, opportunities, and future aspects are summarized. Hopefully, this review may inspire researchers to explore new ideas to boost the production of clean energy for the next generation.

Enhancing the Photocatalytic Activity of SnO2-TiO2 and ZnO-TiO2 Tandem Structures Toward Indoor Air Decontamination

ZnO-TiO₂ and SnO₂-TiO₂ tandem structures were developed using the doctor blade technique. It was found that by employing organic hydrophilic and hydrophobic as additives into the precursor it is possible to tailor the film density and morphology with direct consequences on the photocatalytic activity of the tandem structures. The highest photocatalytic efficiency corresponds to ZnO-TiO₂ and can reach 74.04% photocatalytic efficiency toward acetaldehyde when a hydrophilic additive is used and 70.93% when a hydrophobic additive is employed. The snO₂-TiO₂ tandem structure presents lower photocatalytic properties (61.35 % when the hydrophilic additive is used) with a constant rate reaction of 0.07771 min⁻¹.

Bimetallic PtCu Nanocrystal Sensitization WO3 Hollow Spheres for Highly Efficient 3-Hydroxy-2-butanone Biomarker Detection

As a foodborne bacterium, Listeria monocytogenes (LM) can cause serious diseases and even death to weak people. 3-Hydroxy-2-butanone (3H-2B) has been proven to be a biomarker for exhalation of LM. Detection of 3H-2B is a fast and effective method for determining whether the food is infected. Herein, we present an excellent 3H-2B gas sensor based on bimetallic PtCu nanocrystal modified WO₃ hollow spheres. The structure and morphology of the PtCu/WO₃ were characterized, and their gas sensitivities were measured by a static testing method. The results showed that the sensor response of WO₃ hollow spheres was enhanced by about 15 times after modification with bimetallic PtCu nanocrystal. The maximum response value of the PtCu/WO₃ sensor to 10 ppm 3H-2B is as high as 221.2 at 110 °C. In addition, the PtCu/WO₃ sensor also exhibited good selectivity to 3H-2B, fast response/recovery time (9 s/28 s), and low limit of detection (LOD < 0.5 ppm). Furthermore, the sensitivity mechanism was studied by monitoring the reaction products by gas chromatography-mass spectrometry. The excellent gas-sensing performance can be attributed to the synergy between PtCu and WO₃, including the unique spillover effect of O₂ on PtCu nanoparticles, the regulated depletion layer by p-type Cu_xO to n-type WO₃, and their selective catalysis to 3H-2B. Hence, this work offers the rational design and synthesis of highly efficient sensitive materials for the detection of LM for food security.