Insights into the binding mechanism of 2D copper-tetrakis-(4-carboxyphenyl)-porphyrin metal-organic framework nanosheets with Rhodamine B: Spectroscopic and thermodynamics studies

S-scheme heterojunction Cu-porphyrin/TiO2 nanosheets with highly efficient photocatalytic reduction of CO2 in ambient air

Directly capturing CO2 in ambient air and converting it into value-added fuels using photocatalysis is a potentially valuable technology. In this study, Cu-porphyrin (tetrakis-carboxyphenyl porphyrin copper, CuTCPP) was innovatively anchored on the surface of TiO2 (titanium dioxide) nanosheets to form an S-scheme heterojunction. Based on this, a photocatalytic reaction system for stably converting CO2 in ambient air into value-added fuels at the gas-solid interface was constructed without addition of sacrificial agents and alkaline liquids. Under the illumination of visible light and sunlight, the evolution rate of CO is 56 μmol·g-1·h-1 and 73 μmol·g-1·h-1, respectively, with a potential CO2 conversion rate of 35.8 % and 50.4 %. The enhanced of photocatalytic performance is attributed to the introduction of CuTCPP, which provides additional active sites, significantly improves capture capacity of CO2 and the utilization of electrons. Additionally, the formation of S-scheme heterojunction expands the redox range and improves the separation efficiency of photo-generated charges.

Two-Dimensional Cu-Porphyrin Metal-Organic Framework Nanosheet-Supported Flaky TiO2 as an Efficient Visible-Light-Driven Photocatalyst for Dye Degradation and Cr(VI) Reduction

A series of 2D M(Cu, Zn, Co, and Mn)-TCPP MOFs/TiO2 binary nanocomposites (TCPP = tetrakis(4-carboxyphenyl)porphyrin) were constructed by solvothermal in situ loading of flaky TiO2 on the surface of 2D metal-organic frameworks (MOFs). The influence of different coordination metals on the catalytic activity was studied, and it was found that the 2D Cu-TCPP MOFs/TiO2 nanocomposite exhibited the best photo-Fenton performance. The superior property can be attributed to the high absorption coefficient and ultrathin two-dimensional structure of the 2D Cu-TCPP MOFs nanosheets. Meanwhile, the 2D Cu-TCPP MOFs/TiO2 II heterostructure can effectively promote the separation and transfer of photoformed carriers. Moreover, under visible irradiation, the optimized 2D Cu-TCPP MOFs/TiO2 composite can convert 99.9% of Cr(VI) to Cr(III) within 60 min with methanol as the hole scavenger at pH 3.14. Also, the photocatalytic performance of 2D Cu-TCPP MOFs/TiO2 was maintained after five reaction cycles. Furthermore, the proposed visible-light-driven photocatalysis mechanism of the 2D Cu-MOFs/TiO2 composite was reasonably derived according to experimental results. This study demonstrates the potential of building efficient TiO2-based visible light photocatalysts with 2D metal-porphyrin MOFs.

Achiral Sm(III)-Based Metal-Organic Framework as a Luminescence Sensor for Enantiodiscrimination of Quinine and Quinidine

The effective discrimination and determination of the chiral antimalarial drugs quinine (QN) and quinidine (QD) are extremely important for human health. Herein, a 2D achiral Sm-based metal-organic framework (IMU-MOF1 = [Sm(tpba)(L)]n, where Htpba = 4-(2,2':6″,2'-terpyridin)-4'-ylbenzioc acid and H2L = 2,2'-biquinoline-4,4'-dicarboxylic acid) was successfully prepared by the solvothermal method. More importantly, IMU-MOF1 was designed as an ultrasensitive fluorescent probe for the identification of chiral enantiomer drugs. The limits of detection for QN and QD are 4.24 × 10-11 and 7.54 × 10-12 M, respectively. Furthermore, it was demonstrated that the stronger hydrogen-bonding interactions between IMU-MOF1 and quinine furnish a more efficient energy transfer to the ligands in the sensing process, resulting in a significant fluorescence enhancement of IMU-MOF1.

Ultrathin 2D-MOFs for dual-enzyme cascade biocatalysis with sensitive glucose detection performances

In recent years, two-dimensional nanosheet metal-organic frameworks (2D MOFs) have been widely considered as promising carriers for enzyme immobilization owing to their large surface area, designable and tunable structures, and other properties that enhance enzyme loading and modulate interactions with enzymes. In this study, a series of ultrathin 2D M-TCPP (M = Co, Ni, Zn, Cu) nanosheets were synthesized employing a surfactant-assisted bottom-up approach, and the effect of solvent ratio on the morphology and properties of 2D MOFs was explored. After systematic characterization, Cu-based 2D MOFs with large specific surface areas and excellent water stability was selected as the carrier for the co-immobilization of glucose oxidase (GOx) and horseradish peroxidase (HRP). The effects of adsorption and covalent immobilization strategies on bis-enzyme loading and enzyme activity, as well as their applications in rapid glucose detection, were systematically investigated. The results showed that A-CTGH and C-CTGH owned enzyme loadings of 187.9 and 249.1 mg/g, respectively, and exhibited superior enzymatic activity when exposed to harsh environments compared to free enzymes. In addition, the covalently immobilized biocatalyst based on GOx demonstrated a more sensitive glucose detection performance, including a wide linear range from 5.0 to 16 μM with a detection limit of 0.6 μM.

Deployment of metal-organic frameworks as robust materials for sustainable catalysis and remediation of pollutants in environmental settings

From metal-organic chemistry, metal-organic frameworks (MOFs) are of supreme interest for catalysis and environmental settings. Owing to anthropogenic sources and booming industrial practices, the most challenging issue is increased water pollution and environmental insecurity. For instance, several types of synthetic dyes are toxic up to a certain extent, as emerging organic contaminants (EOCs) pose adverse environmental and potential health consequences. A gradual increase in the contamination sources and unpredictable environmental changes in terms of anthropogenic pollution severely affect both water availability and distribution. Therefore, the treatment of dyes containing wastewater matrices for water resource generation is one of the most important tasks, which must be addressed effectively. With structural tunability, MOFs have been appearing as a robust tool for remediating toxic pollutants from wastewater matrices. Moreover, the promising functionality, structural tunability, robust catalytic attributes, compatibility, large surface area, stability in water, and ease in surface functionalization make MOFs one of the considerable materials of interest. This review work spotlights the present-day progress related to MOFs and their catalytic and adsorptive chemistry for a sustainable environment. Following a brief introduction, the characteristic rendering MOFs, as adsorbents, are given with prominent examples. Next, several synthesis routes as a roadmap to engineer MOFs are discussed. From the applied perspective, the adsorptive and catalytic potentialities of MOFs as given by addressing sustainable mitigation of toxic dyes. The last section of the work illustrates key challenging issues and future directions by considering the suiting importance of MOFs.

A photosensitive metal-organic framework having a flower-like structure for effective visible light-driven photodegradation of rhodamine B

Porphyrin-based metal–organic frameworks (MOFs) have great photocatalytic potential due to their good photosensitivity. Their photocatalytic performance is not only determined by molecular structure but also by morphology. Flower-like MOFs are considered to be good materials for catalysis due to their larger specific surface area, more exposed active sites, and good stability. Here, we first proposed a method to synthesize flower-like porphyrin-based MOFs using trifluoroacetic acid as a morphology control agent. These MOFs had a large BET surface area (605.04 m² g⁻¹), a stable structure and a complete morphology. Meanwhile, we discussed their self-assembly process and mechanism in detail. In addition, we studied the photocatalytic performance of flower-like porphyrin-based MOFs and found that the flower-like Cu-TCPP (TCPP = tetrakis(4-carboxyphenyl)porphyrin) has excellent photocatalytic activity. Its photodegradation efficiency toward the cationic dye rhodamine B reached 88% within 100 min and the sample still maintained its stable catalytic activity and complete flower-like morphological structure after five repeated uses. Furthermore, this synthetic strategy can be extended to control the morphology of other MOFs.

Using the method of adding morphological control agent-trifluoroacetic acid (TFA), a flower-like porphyrin-based metal organic framework can be prepared, which shows a good effect on the photocatalytic degradation of rhodamine B.