Production of Fuels and Chemicals from Biomass: Condensation Reactions and Beyond

Unveiling the photocatalytic marvels: Recent advances in solar heterojunctions for environmental remediation and energy harvesting

In the quest for effective solutions to address Environ. Pollut. and meet the escalating energy demands, heterojunction photocatalysts have emerged as a captivating and versatile technology. These photocatalysts have garnered significant interest due to their wide-ranging applications, including wastewater treatment, air purification, CO2 capture, and hydrogen generation via water splitting. This technique harnesses the power of semiconductors, which are activated under light illumination, providing the necessary energy for catalytic reactions. With visible light constituting a substantial portion (46%) of the solar spectrum, the development of visible-light-driven semiconductors has become imperative. Heterojunction photocatalysts offer a promising strategy to overcome the limitations associated with activating semiconductors under visible light. In this comprehensive review, we present the recent advancements in the field of photocatalytic degradation of contaminants across diverse media, as well as the remarkable progress made in renewable energy production. Moreover, we delve into the crucial role played by various operating parameters in influencing the photocatalytic performance of heterojunction systems. Finally, we address emerging challenges and propose novel perspectives to provide valuable insights for future advancements in this dynamic research domain. By unraveling the potential of heterojunction photocatalysts, this review contributes to the broader understanding of their applications and paves the way for exciting avenues of exploration and innovation.

Benzenoid Aromatics from Renewable Resources

In this Review, all known chemical methods for the conversion of renewable resources into benzenoid aromatics are summarized. The raw materials that were taken into consideration are CO2; lignocellulose and its constituents cellulose, hemicellulose, and lignin; carbohydrates, mostly glucose, fructose, and xylose; chitin; fats and oils; terpenes; and materials that are easily obtained via fermentation, such as biogas, bioethanol, acetone, and many more. There are roughly two directions. One much used method is catalytic fast pyrolysis carried out at high temperatures (between 300 and 700 °C depending on the raw material), which leads to the formation of biochar; gases, such as CO, CO2, H2, and CH4; and an oil which is a mixture of hydrocarbons, mostly aromatics. The carbon selectivities of this method can be reasonably high when defined small molecules such as methanol or hexane are used but are rather low when highly oxygenated compounds such as lignocellulose are used. The other direction is largely based on the multistep conversion of platform chemicals obtained from lignocellulose, cellulose, or sugars and a limited number of fats and terpenes. Much research has focused on furan compounds such as furfural, 5-hydroxymethylfurfural, and 5-chloromethylfurfural. The conversion of lignocellulose to xylene via 5-chloromethylfurfural and dimethylfuran has led to the construction of two large-scale plants, one of which has been operational since 2023.

Enhancing reductive conversion of levulinic acid and levulinates to γ-valerolactone: Role of oxygen vacancy in MnOx catalysts

Oxygen vacancies (Ov) in metal oxides play a crucial role in modifying the electronic and acidic properties of catalysts, thereby influencing their catalytic activity. This study explores the impact of Ov in MnOx catalysts on their acidic and catalytic properties for the Meerwein-Ponndorf-Verley reduction of levulinic acid (LA) and levulinate to γ-valerolactone (GVL). Various characterization techniques demonstrate that surface Ov significantly modulate the acidic properties of MnOx catalysts, positively correlating with Lewis/Brønsted acid ratio and GVL yield. In situ DRIFTS and DFT calculations further unveil the reaction mechanism, revealing that Ov facilitate the activation and dehydrogenation of isopropanol and subsequent hydrogen transfer and hydrogenation of LA, leading to enhanced GVL production. These insights underscore the pivotal role of Ov in MnOx catalysts for the efficient conversion of LA to GVL, highlighting their importance in improving catalytic performance.

Backbone-functionalised ruthenium diphosphine complexes for catalytic upgrading of ethanol and methanol to iso-butanol

Efficient catalysts for Guerbet-type ethanol/methanol upgrading to iso-butanol have been developed via Michael addition of a variety of amines to ruthenium-coordinated dppen (1,1-bis(diphenylphosphino)ethylene). All catalysts produce over 50% iso-butanol yield with >90% selectivity in 2 h with catalyst 1 showing the best activity (74% yield after this time). The selectivity and turnover number approach 100% and 1000 respectively using catalyst 6. The presence of uncoordinated functionalised donor groups in these complexes results in a more stable catalyst compared to unfunctionalised analogues.

Upgrading Ethanol to n-Butanol in the Presence of Carbonate Catalyzed by a Cp*Ir Complex Bearing a Functional 2,2'-Carbonylbibenzimidazole Ligand

Upgrading ethanol to n-butanol as biofuels is an important topic for sustainable chemistry. Herein, a Cp*Ir complex bearing a functional 2,2'-carbonylbibenzimidazole ligand [Cp*Ir(2,2'-COBiBzImH2)Cl][Cl] was designed and synthesized. In the presence of a catalyst (0.1 mol %) and Cs2CO3 (6 mol %), the highest yield of updated n-butanol is up to 37% with 80% selectivity. NH units in the ligand are crucially important for the catalytic activity of the iridium complex.

Ruthenium-Catalyzed Selective α-Alkylation of β-Naphthols using Primary Alcohols: Elucidating the Influence of Base and Water

Functionalized arenes and arenols have diverse applications in chemical synthesis and material chemistry. Selective functionalization of arenols is a topic of prime interest. In particular, direct alkylation of arenols using alcohols is a challenging task. In this report, a ruthenium pincer catalyzed direct α-alkylation of β-naphthol using primary alcohols as alkylating reagents is reported. Notably, aryl and heteroaryl methanols and linear and branched aliphatic alcohols underwent selective alkylation reactions, in which water is the only byproduct. Notably, catalytically derived α-alkyl-β-naphthol products displayed high absorbance, emissive properties, and quantum yields (up to 93.2 %). Dearomative bromination on α-alkyl-β-naphthol is demonstrated as a synthetic application. Mechanistic studies indicate that the reaction involves an aldehyde intermediate. DFT studies support this finding and further reveal that a stoichiometric amount of base is required to make the aldol condensation as well as elementary steps required for regeneration of catalytically active species. In situ-generated water molecule from the aldol condensation reaction plays an important role in the regeneration of an active catalyst.

Operando generated copper-based catalyst enabling efficient electrosynthesis of 2,5-bis(hydroxymethyl)furan

Electrocatalytic upgrading of biomass-derived platform molecules has emerged as a sustainable and environmentally benign route to produce high-value chemicals. The main challenge lies in developing efficient catalysts for the selective activation of designated chemical bonds in the presence of various reducible groups. This work demonstrated a high-efficiency electrochemical conversion of 5-hydroxymethylfurfural (HMF) to 2,5-bis(hydroxymethyl)furan (BHMF), an important industrial synthetic reagent. A highly porous Cu-based catalyst was developed that achieved nearly 100% BHMF selectivity and long-term stability. Through comprehensive operando and ex-situ structural characterizations, an electrochemically generated catalyst with abundant Cu/Cu2O interfaces was identified as a catalytically active phase for HMF conversion. Deuterated BHMF, with the potential to produce deuterated drugs, was also synthesized using D2O as the deuterium source. Density functional theory calculations show that the Cu/Cu2O interface structure exhibits relatively low energy barriers for the hydrogenation of HMF to BHMF. This work provides insights into the origin of electrocatalytic hydrogenation activity and highlights the promising potential of the electrocatalytic synthesis of high-value chemicals.

Bacterial enzymatic degradation of recalcitrant organic pollutants: catabolic pathways and genetic regulations

Contamination of soil and natural water bodies driven by increased organic pollutants remains a universal concern. Naturally, organic pollutants contain carcinogenic and toxic properties threatening all known life forms. The conventional physical and chemical methods employed to remove these organic pollutants ironically produce toxic and non-ecofriendly end-products. Whereas microbial-based degradation of organic pollutants provides an edge, they are usually cost-effective and take an eco-friendly approach towards remediation. Bacterial species, including Pseudomonas, Comamonas, Burkholderia, and Xanthomonas, have the unique genetic makeup to metabolically degrade toxic pollutants, conferring their survival in toxic environments. Several catabolic genes, such as alkB, xylE, catA, and nahAc, that encode enzymes and allow bacteria to degrade organic pollutants have been identified, characterized, and even engineered for better efficacy. Aerobic and anaerobic processes are followed by bacteria to metabolize aliphatic saturated and unsaturated hydrocarbons such as alkanes, cycloalkanes, aldehydes, and ethers. Bacteria use a variety of degrading pathways, including catechol, protocatechuate, gentisate, benzoate, and biphenyl, to remove aromatic organic contaminants such as polychlorinated biphenyls, polycyclic aromatic hydrocarbons, and pesticides from the environment. A better understanding of the principle, mechanisms, and genetics would be beneficial for improving the metabolic efficacy of bacteria to such ends. With a focus on comprehending the mechanisms involved in various catabolic pathways and the genetics of the biotransformation of these xenobiotic compounds, the present review offers insight into the various sources and types of known organic pollutants and their toxic effects on health and the environment.

Recent Advances on Transition-Metal-Based Layered Double Hydroxides Nanosheets for Electrocatalytic Energy Conversion

Transition-metal-based layered double hydroxides (TM-LDHs) nanosheets are promising electrocatalysts in the renewable electrochemical energy conversion system, which are regarded as alternatives to noble metal-based materials. In this review, recent advances on effective and facile strategies to rationally design TM-LDHs nanosheets as electrocatalysts, such as increasing the number of active sties, improving the utilization of active sites (atomic-scale catalysts), modulating the electron configurations, and controlling the lattice facets, are summarized and compared. Then, the utilization of these fabricated TM-LDHs nanosheets for oxygen evolution reaction, hydrogen evolution reaction, urea oxidation reaction, nitrogen reduction reaction, small molecule oxidations, and biomass derivatives upgrading is articulated through systematically discussing the corresponding fundamental design principles and reaction mechanism. Finally, the existing challenges in increasing the density of catalytically active sites and future prospects of TM-LDHs nanosheets-based electrocatalysts in each application are also commented.

Modeling and Thermodynamic Studies of γ-Valerolactone Production from Bio-derived Methyl Levulinate

The exploitation of biomass to reduce the dependency on fossil fuels represents a challenge that needs to be solved as soon as possible. Nowadays, one of the most fashionable processes is γ-valerolactone (GVL) production from bio-derived methyl levulinate (ML). Deep understanding of the thermodynamic aspects involved in this process is key for a successful outcome, but detailed studies are missing in the existing literature. A thermodynamic study of the reaction of γ-valerolactone (GVL) production from bio-derived methyl levulinate (ML) is performed by the Gibbs free energy minimization method. The effect of various reaction conditions (temperature, concentration, flow rate) and the implication of possible intermediates and byproducts are assessed. Conversion and selectivity are calculated from the simulation of the ML hydrogenation using isopropanol as the hydrogen donor under continuous flow conditions. Significant increases in GVL selectivity can be achieved under dry conditions, keeping the high conversion. Comparison between theoretical and experimental results from a previous article discloses the effect of using 5%RuTiO2 catalysts, which increases the selectivity from 3-40% to 41-98%. Enthalpy and Gibbs free energy of the reactions at issue are also calculated from models using Barin equations according to Aspen Physical Property System parameters.

Direct Stannylation and Silylation of Arylmethanols by Palladium Catalysis

A direct transformation of non-preactivated benzyl alcohols to benzyl stannanes and benzyl silanes was realized through Pd-catalyzed C(sp³)-O activation process. By using versatile tin and silicon sources, these reactions exhibit a broad substrate scope and a high efficiency under mild conditions, affording functionalized benzyl and allylic stannanes and benzylsilanes with high yields. The successful implementation of gram-scale stannylation/silylation as well as the one-pot Stille coupling reaction demonstrates the potential application of this method in organic synthesis. Both experimental and theoretical investigations reveal the mechanistic details of this reaction.

Unusual aldehyde reductase activity for the production of full-length fatty alcohol by cyanobacterial aldehyde deformylating oxygenase

Aldehyde-deformylating oxygenase (ADO) is a non-heme di-iron enzyme that catalyzes the deformylation of aldehydes to generate alkanes/alkenes. In this study, we report for the first time that under anaerobic or limited oxygen conditions, Prochlorococcus marinus (PmADO) can generate full-length fatty alcohols from fatty aldehydes without eliminating a carbon unit. In contrast to ADO's native activity, which requires electrons from the Fd/FNR electron transfer complex, ADO's aldehyde reduction activity requires only NAD(P)H. Our results demonstrated that the yield of alcohol products could be affected by oxygen concentration and the type of aldehyde. Under strictly anaerobic conditions, yields of octanol were up to 31%. Moreover, metal cofactors are not involved in the aldehyde reductase activity of PmADO because the yields of alcohols obtained from apoenzyme and holoenzyme treated with various metals were similar under anaerobic conditions. In addition, PmADO prefers medium-chain aldehydes, specifically octanal (k_cat/K_m around 15 × 10^-3 μM^-1min^-1). The findings herein highlight a new activity of PmADO, which may be applied as a biocatalyst for the industrial synthesis of fatty alcohols.

Ruthenium-catalysed α-prenylation of ketones using prenol

Prenol and isoprenoids are common structural motifs in biological systems and possess diverse applications. An unprecedented direct catalytic prenylation of ketones using prenol is attained. This C-C bond formation reaction requires only a ruthenium pincer catalyst and a base, and H₂O is the only byproduct.

One pot tandem dehydrogenative cross-coupling of primary and secondary alcohols by ruthenium amido-functionalized 1,2,4-triazole derived N-heterocyclic carbene complexes

One-pot tandem dehydrogenative cross-coupling of primary and secondary alcohols was catalyzed by three ruthenium complexes [1-(R)-4-N-(furan-2-ylmethyl)acetamido-1,2,4-triazol-5-ylidene]Ru(p-cymene)Cl [R = Et (1b), i-Pr (2b), Bn (3b)], of amido-functionalized 1,2,4-triazole derived N-heterocyclic carbene (NHC) ligands. Density Functional Theory (DFT) calculations were employed for the ruthenium (1b) precatalyst to understand this reaction mechanism completely, and the mechanisms adapted are divided categorically into three steps (i) nucleophilic substitution of chloride ions by alcohols, (ii) dehydrogenation of primary and secondary alcohols, and (iii) olefin and ketone hydrogenation. Our mechanistic study reveals that the formation of a deprotonated Ru-alcoholate (A) or (E) intermediate is favorable compared to the protonated form (A') or (E') from (1b) by associative nucleophilic substitution. Though an ionic pathway that proceeds through (A') or (E'), has less barriers in the dehydrogenation and olefin/ketone hydrogenation steps than that of the neutral pathway, proceeding through (A) or (E), a steep energy barrier was observed in the first nucleophilic substitution step, prohibiting the reaction to proceed via the intermediate (A') or (E'). Thus, our thorough mechanistic study reveals that the reaction proceeds via deprotonated Ru-alcoholate (A) or (E) species. Furthermore, the 1,4 addition of an α,β-unsaturated carbonyl compound is kinetically and thermodynamically favorable over the 1,2 addition, and the experiments support these observations. As a testimony towards practical application in synthesizing bio-active flavonoid based natural products, five different flavan derivatives (16-20), were synthesized by the dehydrogenative coupling reaction using the neutral ruthenium (1-3)b complexes.

Diverse Applications of Biomass-Derived 5-Hydroxymethylfurfural and Derivatives as Renewable Starting Materials

This Review summarizes recent efforts to capitalize on 5-hydroxymethylfurfural (HMF) and related furans as emerging building blocks for the synthesis of fine chemicals and materials, with a focus on advanced applications within medicinal and polymer chemistry, as well as nanomaterials. As with all chemical industries, these fields have historically relied heavily on petroleum-derived starting materials, an unsustainable and polluting feedstock. Encouragingly, the emergent chemical versatility of biomass-derived furans has been shown to facilitate derivatization towards valuable targets. Continued work on the synthetic manipulation of HMF, and related derivatives, for access to a wide range of target compounds and materials is crucial for further development. Increasingly, biomass-derived furans are being utilized for a wide range of chemical applications, the continuation of which is paramount to accelerate the paradigm shift towards a sustainable chemical industry.

N,N-Dimethylformamide-stabilized ruthenium nanoparticle catalyst for β-alkylated dimer alcohol formation via Guerbet reaction of primary alcohols

N,N-Dimethylformamide-stabilized Ru nanoparticles (NPs) provide a highly efficient catalyst for the Guerbet reaction of primary alcohols. DMF-modified Ru NPs were synthesized, and characterized by transition electron microscopy, and X-ray absorption spectroscopy, X-ray photoelectronspectroscopy, and Fourier-transform infrared spectroscopy. The Ru NP catalyst was highly durable during catalytic reactions under external additive/solvent-free conditions.

Manganese-catalyzed hydrogenation, dehydrogenation, and hydroelementation reactions

The emerging field of organometallic catalysis has shifted towards research on Earth-abundant transition metals due to their ready availability, economic advantage, and novel properties. In this case, manganese, the third most abundant transition-metal in the Earth's crust, has emerged as one of the leading competitors. Accordingly, a large number of molecularly-defined Mn-complexes has been synthesized and employed for hydrogenation, dehydrogenation, and hydroelementation reactions. In this regard, catalyst design is based on three pillars, namely, metal-ligand bifunctionality, ligand hemilability, and redox activity. Indeed, the developed catalysts not only differ in the number of chelating atoms they possess but also their working principles, thereby leading to different turnover numbers for product molecules. Hence, the critical assessment of molecularly defined manganese catalysts in terms of chelating atoms, reaction conditions, mechanistic pathway, and product turnover number is significant. Herein, we analyze manganese complexes for their catalytic activity, versatility to allow multiple transformations and their routes to convert substrates to target molecules. This article will also be helpful to get significant insight into ligand design, thereby aiding catalysis design.

Mechanistic Investigations of the Synthesis of Lactic Acid from Glycerol Catalyzed by an Iridium–NHC Complex

In the present work, the reaction pathways and the origin of catalytic activity for the production of lactic acid from glycerol catalyzed by an iridium–heterocyclic carbene (Iridium-NHC) complex at 383.15 K were investigated by DFT study at the M06-D3/6-311++G (d, p)//SDD level. Compared to the noncatalytic reaction pathway, the energy barrier sharply decreased from 75.2 kcal mol−1 to 16.8 kcal mol−1 with the introduction of the iridium–NHC complex. The catalytic reaction pathway catalyzed by the iridium–NHC complex with a coordinated hydroxide included two stages: the dehydrogenation of glycerol to 2,3-dihydroxypropanal, and the subsequent isomerization to lactic acid. Two reaction pathways, including dehydrogenation in terminal and that in C2-H, were studied. It was found that the formation of dihydroxyacetone from the H-removal in C2-H was more favorable, which might have been due to the lower energy of LUMO, whereas dihydroxyacetone could be easily transferred to 2,3-dihydroxypropanal. The analyses of electrostatic potential (ESP), hardness, and f- Fukui function also confirmed that the iridium–NHC complex acted as a hydrogen anion receptor and nucleophilic reaction center to highly promote the conversion of glycerol to lactic acid.

Advancements in the Conversion of Lipid-Rich Biowastes and Lignocellulosic Residues into High-Quality Road and Jet Biofuels Using Nanomaterials as Catalysts

At present, the majority of available road and jet biofuels are produced from oleochemical feedstocks that include vegetable oils and biowastes such as waste cooking oils and animal fats. Additionally, one of the most promising ways to achieve long-term environmental goals is to sustainably use lignocellulosic residues. These resources must be treated through a deoxygenation process and subsequent upgrading processes to obtain high-quality road and jet biofuels. Accordingly, in this review, we explore recent advancements in the deoxygenation of oleochemical and lignocellulosic feedstocks in the absence of hydrogen to produce high-quality road and jet biofuels, mainly focusing on the use of nanomaterials as catalysts and the valorization of lipid-rich biowastes and lignocellulosic residues. As a result, we found that regardless of the catalyst particle size, the coexistence of basic sites and weak/medium acid sites is highly important in catalytic systems. Basic sites can enhance the removal of oxygenates via decarboxylation and decarbonylation reactions and inhibit coke formation, while weak/medium acid sites can enhance the cracking reaction. Additionally, the extraction of value-added derivatives from lignocellulosic residues and their subsequent upgrade require the use of advanced methods such as the lignin-first approach and condensation reactions.

Acetalization of Glycerol with Citral over Heteropolyacids Immobilized on KIT-6

Glycerol acetalization with citral was studied using a heteropolyacid (tungstophosphoric acid) supported on KIT-6, as a catalyst, at 100 °C. Different catalysts were synthesized. Catalysts were characterized by scanning electron microscopy (SEM), inductively coupled plasma (ICP), X-ray diffraction (XRD), attenuated total refletion-Fourier transform infrared spectroscopy (ATR-FTIR), and potentiometric titrations. At a fixed time, the glycerol conversion increased with the H3PW12O40 (PW) on KIT-6. PW4-KIT-6 material had a higher conversion than other catalysts. The optimization of glycerol’s acetalization with citral was studied under the PW4-KIT-6 catalyst. After 5 h, it was found that, at T = 100 °C, with m = 0.3 g of solid, molar glycerol:citral = 1:2.25, the conversion of glycerol was 89%. Moreover, the PW4-KTI-6 catalyst showed good catalytic stability.

Atom-economic Approach to the Synthesis of α-(Hetero)aryl-substituted Furan Derivatives from Biomass

An atom-economic ring construction approach to the synthesis of α-(hetero)arylfurans based on renewable furanic platform chemicals has been developed. Corresponding compounds have been prepared in good to excellent yields via [2+2+2] and [4+2] cycloaddition reactions using metal-catalyzed or photoredox protocols. Easily available HMF-based 2-hydroxymethyl-5-ethynylfuran and 2-hydroxymethyl-5-cyanofuran were used as starting materials. A synthetic route with an improved carbon economy factor has been implemented to achieve sustainability aim. The possible application of arylfurans as molecular conductors has been investigated by DFT calculations, which revealed excellent charge transfer properties. As a future perspective, integration of biomass processing strategy into manufacturing of molecular electronics was pointed out to achieve the aim of sustainability.

An efficient catalytic method for the borohydride reaction of esters using diethylzinc as precatalyst

A cheap and easily available ZnEt2 is an effective precatalyst, which can be used for the hydroboration reaction of various organic carbonates and esters with HBpin.

Ruthenium(ii)-catalyzed regioselective 1,6-conjugate addition of umpolung aldehydes as carbanion equivalents

Highly regioselective 1,6-conjugate addition was developed using hydrazone as carbanion equivalent catalyzed by ruthenium under mild conditions.

Homogeneous Catalyzed Valorization of Furanics: A Sustainable Bridge to Fuels and Chemicals

The development of efficient biomass valorization is imperative for the future sustainable production of chemicals and fuels. Particularly, the last decade has witnessed the development of a plethora of effective and selective transformations of bio-based furanics using homogeneous organometallic catalysis under mild conditions. In this review, we describe some of the advances regarding the conversion of target furanics into value chemicals, monomers for high-performance polymers and materials, and pharmaceutical key intermediates using homogeneous catalysis. Finally, the incorporation of furanic skeletons into complex chemical architectures by multifunctionalization routes is also described.

Xylochemicals and where to find them

This article surveys a range of important platform and high value chemicals that may be considered primary and secondary 'xylochemicals'. A summary of identified xylochemical substances and their natural sources is provided in tabular form. In detail, this review is meant to provide useful assistance for the consideration of potential synthetic strategies using xylochemicals, new methodologies and the development of potentially sustainable, xylochemistry-based processes. It should support the transition from petroleum-based approaches and help to move towards more sustainability within the synthetic community. This feasible paradigm shift is demonstrated with the total synthesis of natural products and active pharmaceutical ingredients as well as the preparation of organic molecules suitable for potential industrial applications.

Systematic Study of Aromatic-Ring-Targeted Cycloadditions of 5-Hydroxymethylfurfural Platform Chemicals

The reaction space of the furanics-to-aromatics (F2A) conversion process for 5-hydroxymethylfurfural (HMF)-based platform chemicals has been explored both experimentally and by quantum chemistry methods. For the first time, a structure-activity relationship was established in furan-yne cycloaddition for a number of different HMF derivatives. Correlations between the activation energy of the cycloaddition stage and the structure of the substrates were established by molecular modeling methods. Analysis of the concerted and stepwise mechanisms of cycloaddition in the singlet and triplet electronic states of the molecular system was carried out. A series of biobased 7-oxanorbornadienes was obtained in the reaction with dimethyl acetylenedicarboxylate. Various methods of aromatization of the obtained [4+2] adducts have been examined. Rearrangement catalyzed by a Lewis acid leads to the formation of a phenol derivative, whereas reduction by diiron nonacarbonyl leads to the formation of functionalized benzene. Systematic study of the cycloaddition process has revealed a simple way to analyze and predict the relative reactivity of furanic substrates.